Maintenance Dialog for T25* Tables in Tcode KES1

Hello,
I am getting an error saying there is no Maintenance Dialog for T25* tables in KES1 Transaction. Please let me know how to go ahead and solve this issue.
Thanks very much in Advance.
regards,
Mahesh

Hi,
I am also getting the same error "Maintenance Dialog for T25* Tables in Tcode KES1"
Did anybody have any solution for this.
Regards,
Mohan

Similar Messages

  • Problem with a maintenance dialog for a table

    Hi,
    I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
    When I use the transaction "ztransaction", I have a message like this :
    "The maintenance dialog for ZTABLE is incomplete or not defined".
    What can I do ? How can I complete or define the maintenance dialog ?
    Thanks in advance.
    Regards.
    C.

    First after creating a table you should creat a Table maintenance generator.
    Utilities -> Table Maintenance Generator .
    After creating Maintenance goto
    Environment -> Transaction
    This will succesfully create a transaction for your table
    You should give parameters while creating the transaction.
    UPDATE = 'X'
    VIEWNAME = your table name
    Bhupal

  • Maintenance dialog for table

    Hello folks,
    I had successfully created a table and I tried inserting some records in to the table using table maintenance.
    I received the following error.
    'The maintenance dialog for table zxxx is incomplete or not defined'.
    What does this mean?? And what should I do??
    I am pasting the detail help over this error.
    The maintenance dialog for ZTV_DBS_RANGE_NO is incomplete or not defined
    Message no. SV 037
    Diagnosis
    The called function with the view/table ZTV_DBS_RANGE_NO needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
    System Response
    The called function cannot be performed.
    Procedure
    Generate the required maintenance dialog.
    Please help

    You have to create the maintenance dialog for table you would like to use with transaction SM30 / SM31.
    To do this look the transaction SE55.
    (or SE11, select the table, MODIFY, (menu) Utilities -> Maintain dialog ... )
    Regards
    Frédéric
    Message was edited by: Frédéric Girod

  • The maintenance dialog for J_2IVLYCTR is incomplete or not defined

    Dear experts,
    In transaction code J2I7 following error is appering
    The maintenance dialog for J_2IVLYCTR is incomplete or not defined
    Regards,
    ABHIJEET JOSHI

    Hello,
    This depends on the version and release level, Please check this veiw of J_2IVLYCTR . If these below given entries are not their then
    MANDT     MANDT     CLNT     3     Client
    BUKRS     BUKRS     CHAR     4     Company Code
    REGISTER     J_2IREGSTR     CHAR     10     Register name
    LAYOUTNR     J_2ILAYNR     NUMC     3     Layout number
    LAYOUTNAME     TDFORM     CHAR     16     Form Name
    LAY_DESC     J_2ILAYDES     CHAR     64     Layout description
    PROGRAME     PROGRAM     CHAR     40     Program/transaction in SQL trace analysis
    ROUTINE     J_2IROUTIN     CHAR     30     Form routine
    NOOFCOPIES     J_2INOCOPI     NUMC     3     No. of copies
    OUTDEVICE     RSPOPNAME     CHAR     4     Spool: Output device
                                                                                    if not available add these entries in above mentioned table  and check J1I7 tcode.
    Regards
    Mahesh Naik.

  • The maintenance dialog  for SM 30

    Hi i am maintaining a table through SM30. and i have used one display field in transaction for that table. when i am entering data through transaction that disply is getting displayed when i press ENTER. but when maintaining through SM30 thet display Maintanance dilog Incomplte,
    then i went tbel maintanance and create ,but it doesnt save
    please help me
    This is the  error i am getting'
    <b>The maintenance dialog for ZFT017_GLCST_TR is incomplete or not defined</b>
    kanishka

    Hi,
    there is a prob in Table maintenace Generation Cretaion.
    se11> table name> change.
    Menu- utilities- table mauintenace Gen .
    Give Authorisation Grp and Funct Group.
    Single Step
    Provide Screen No.
    Then Assigning the tCODe.
    Se93.
    In this U shud give TABLE VIEW :    TABLE NAME.
                              UPDATE       : X  <----
    Ensure This u have given.
    Rvert Back if any issues,
    Reward with points if helpful.
    regards,
    Naveen

  • Table maintenance Generator for Z-Table

    HI Frnds,
        I have created the table maintenance Generator for Z-table while saving data it is prompting for Transport Request, Each time while creating new Data It is asking for Transport request , How to avoid this

    Hi Ravi ,
      When you create the maintanence generator ,  at the bottom there is a section 'Dialog Data Transport Details' with two options.
    I feel currently you must have selected
    'Standard Recording Routine'                      
    uncheck that and select  <b>no,or,user recording routine </b>           .
    So go to SE11 , enter your table name , go to edit mode and then go to table maintancen generator.
    Hope this helps , reward points if reply is helpful.
    Regards
    Arun

  • Table Maintenance Generator for the table "J_1ISTATECD"

    Hi,
    How to create Table Maintenance Generator for the table "J_1ISTATECD". Can anyone please explain the steps for this.
    Thanks in advance....
    Regards,
    Sriram.

    Hi Sriram,
    -->Create view in SE11
    -->Goto transcation SE11 ABAP Dictionary
    -->Select View and type in the name of the view you want to create.
    -->Press the Create button
    -->In the dialog box that appears, choose Maintenance View
    -->Select tables and fields for the view
    -->Activate the view
    or
    -->Create view in SE11
    -->Goto transcation SE11 ABAP Dictionary
    -->enter table name
    -->go to Utilities
    -->select table maintainance Genarator
    -->Enter single step
    --> enter Function Group(all the code for Table mainaitenace is stored here)
    -->eneter single step
    -->enter Authorization gorup(we can restrict some user,s not tot update data)
    Activate the view
    function Group  -->goto se37 -- > menu bar goto->create function group with five letters ..
    add the same function group in table maintainenece generatoror enter the sane table name in Function group Place..
    if you dont know the Authorization group ( not given by Function design) put &NA&
    or if you want to know the maintainence View already exists go to table TSTCV
    enter Table name you can get the view available for the table name..
    Regards,
    Prabhudas

  • The maintenance dialog for V_AISUSER is incomplete or not defined

    I was not able to assign S-user for SAP Support Portal functionality from SPRO.  I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
    The maintenance dialog for V_AISUSER is incomplete or not defined
    Message no. SV037
    Diagnosis
    The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
    System Response
    The called function cannot be performed.
    Procedure
    Generate the required maintenance dialog.
    Thank you in advance for your assistance.
    Regards,
    Franc

    Hi Nesimi,
    I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
    I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
    What's a ditto...
    Thank you again for your time.
    Cheers,
    Franc Nguyen

  • Error : Maintenance dialog for ztable is incomplete or not defined

    Hi Gurus
    While maintaining the ztable through SM30 got the following error.
    Maintenance dialog for ztable is incomplete or not defined
    I have to add new enteries in the previously created ztable.
    Please suggest
    Manvir

    Go to SE11, give the table name and click on change. Then Go to utilities--> Table
    maintenance generator.
    In the table maintenance generator screen, we should give Authorization Group,
    Function Group name (Function Group name can be same as table name),
    Maintenance type can be one step or two step, usually we will create with one
    step. we should give maintenance screen number. After clicking on create button,
    a table maintenance generator will be created.
    To check it go to SM30 . In SM30, we find display, Maintain options.
    We can view the table contents by choosing Display and we can create table
    entries by choosing Maintain.

  • Add Table maintenance program for custom table to an existing func group

    Hi Guys,
    Can I add Table maintenance program for custom table to an existing function group or I need to create a new
    function group for each custom table.
    Thanks,
    mini

    You can add to an existing function group, there's nothing technically to stop you doing this.  However, consider that this is creating generated function modules in this function group and you would be wise to avoid using a function group containing manually created modules.
    I personally always create a new function group, using the name of the table as the name of the function group.
    Regards,
    Nick

  • Maintenance Dialog for V_T7INDA_OFFGRP does not exist

    Hi Friends,
    I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
    getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
    not exist'.
    When I went to se54 to create the Maintenance Dialog, I am not able to
    see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
    Can you please help me how I can creat the Maintenance Dialog for this
    view.
    Thanks,
    Suresh Kumar Paturi

    Procedure compiles OK if I replace
    SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    by
    pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
    I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    Thanks

  • How to regenerate a table maintenance view for a table.

    A  new customer defined field(y_status) was added to the table(ykxrdarea). But the field is not reflected in the view maintenance.busiess adviced me to regenerate the table view maintenance.
    Can any one help me how to regenerate the table view maintenance.

    Go to transaction SE11.Enter the table name and choose utilities from the menu and click on table maintenence generator.You will get the table maintenance dialog.Choose generated objects from the menu and click on change.You will get the change generation elements screen.Enter the reason for regeneration.In your case it is new field/sec.table in structure.hit enter and the table maintenance will be regenerated.If you go back and see the maintenance view now you should see your field.
    cheers
    Nishanth

  • Two table maintenance generator for one table

    Can we created two table maintenance generator for one ztable. if yes then what will be the steps.

    Hi Prem,
    Why you need two table maintenance generator for a single table?
    We can generate only single table maintenance  generator for a single table.
    you can add modification event in  inside table maintenance if you need anything to change or validate in insde your table maintenance generator.
    Regards,
    Prasenjit

  • The maintenance dialog for T2538 is incomplete or not defined

    hi to all
    i was trying to configure tc. KES1 in CO-PA    trying to maintaining characteristic values.
    does anybody give idea  HOW TO MAINTAINE DIALOG FOR T2538
    V V URGENT
    HARI

    Hi Hari,
    Please let me know the solution for the issue if you have mentioned as i am exactly facing the same kind of issue.
    regards,
    Mahesh

  • Maintenance View for custom table with foreign key relationship

    Hi Folks,
         I have created a custom table with foreign key relationship with other check tables. I want to create a maintenance view / tablemaintenance generator. What all things I need to take care for the foreign keys related fields while creating the maintenance view / tablemaintenance generator.
    Regards,
      santosh

    Hi,
    You do not have to do anything explicitely for the foreign key relationships in the table maintainance generator.
    Create the table maintainance generator via SE11 and it will take care of all teh foreign key checks by itself.
    Regards,
    Ankur Parab

Maybe you are looking for