Maintenance Release Issue - 11.1.2.0 to 11.1.2.3

Gurus,
I have been facing a couple of issues post applying MAINTENANCE release on 11.1.2.0 to bring it to 11.1.2.3 release.
I am not able to launch Dimension library / Application library / Data Syncronization etc
Every time I try to open it I get the following error:
A 'Internal Server Error' error occurred communicating with the server.
Can any one let me know what might be going wrong?
2. Every time I try to configure HFM, deployment to application server fails with the following exception in the configtool log.
2013-12-12T15:58:36.648+05:30] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 22] [ecid: 0000KBaMHzPEkJ8zngvH831IeOxZ000005,0] [SRC_CLASS: com.hyperion.cis.config.AntDeploymentApiAdapter] Error: [[
D:\ORCL\MW\EPMSystem11R1\common\config\11.1.2.0\resources\ant-repository\build.xml:8: java.lang.IllegalStateException: java.lang.reflect.InvocationTargetException
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:116)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    at com.hyperion.hit.tool.deploy.ant.engine.ProjectRunner.execAtNumber(ProjectRunner.java:137)
    at com.hyperion.cis.config.AntDeploymentApiAdapter.deploy(AntDeploymentApiAdapter.java:168)
    at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:239)
    at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:592)
    at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:302)
    at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalStateException: java.lang.reflect.InvocationTargetException
    at com.hyperion.hit.tool.deploy.ant.wrappers.ScriptTaskWrapper.execute(ScriptTaskWrapper.java:76)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    ... 12 more
Any help will be highly appreciated...
Thanks in advance.

Just telling some info, did you changed Oracle middleware home path (Oracle\Middleware folder names)??
I read somewhere if we change that default folder path, logs won't create properly.
Then regarding your issue, check IIS is running or not and did you configure EPMA successfully or not??
because here you have pasted configtool.log error msg. If no, then configure it first then try to lanuch.
If yes, then paste EPMA log here.
Please tell me which RDBMS you are using??
Thanks,
Mady

Similar Messages

11.1.2.3 maintenance release pre-req step

We are currently running Distributed installation of our production environment on version 11.1.2.1
Plan is to apply maintenance release 11.1.2.3 to existing 11.1.2.1
Going through document: Oracle® Enterprise Performance Management System Installation and Configuration Guide Release 11.1.2.3
Page 188
Apply any required PSEs before proceeding with maintenance the installation.
To review the list of defects fixed between earlier releases, use the Defects Fixed Finder. This
tool enables you to identify the products you own and your current implementation release.
With a single click, the tool quickly produces a customized report of fixed-defect descriptions
with their associated platforms and patch numbers. This tool is available here:
https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1292603.1
QUESTION:
=======
Ran the defect fixed finder tool as suggested above and it came up with list of defects fixed AFTER my current release 11.1.2.1
1) Since we are applying maintenance patch release 11.1.2.3 on top of 11.1.2.1 would it just suffice if we apply patches to address defects on top of 11.1.2.3 ALONE as a post maintenance patch step?
2) Since the instruction mentions "any required PSU's" -- is it ok we skip the PSU's for version 11.1.2.1 and proceed with maintenance upgrade -- will there be any problem with this approach. Please suggest.

I would question the requirement to install PSEs because in theory the maintenance release should be deploying the latest set of files/fixes and I would think it only relates to patches for the release you are currently running, this requirement was not in previous maintenance releases and with the software being released only a week ago it is difficult to give a definitive answer, maybe one to ask Oracle.
Cheers
John
http://john-goodwin.blogspot.com/

How do I determine Maintenance release level

Good morning,
Can anyone tell me how to determine the maintenance release level on an OES11.1 SP1 server ?
The instructions for NSM 4 say you need to be at OES11.1 SP1 with Jan 2013 Maintenance release applied.
When I run "cat /etc/novell-release" my reply is;
VERSION LEVEL = 11.1
PATCHLEVEL = 1
I tried looking in YaST2 "Software Management, though that was any help for me.
Is there another way to determine if the Jan 2013 Maintenance release was applied. Maybe a file date somewhere?
Thanks,
Allen

On 12/03/2015 15:16, allenmorris wrote:
> Can anyone tell me how to determine the maintenance release level on an
> OES11.1 SP1 server ?
>
> The instructions for NSM 4 say you need to be at OES11.1 SP1 with Jan
> 2013 Maintenance release applied.
>
> When I run "cat /etc/novell-release" my reply is;
>
> VERSION LEVEL = 11.1
> PATCHLEVEL = 1
>
> I tried looking in YaST2 "Software Management, though that was any help
> for me.
>
> Is there another way to determine if the Jan 2013 Maintenance release
> was applied. Maybe a file date somewhere?
As far as I know there's no command or log file which will easily show
which maintenance release(s) has/have been applied.
Since you're wanting to know whether a particular one has been applied
what you can do in this case is check your installed versions of the
packages shipped in that maintenance release. See
http://download.novell.com/Download?...d=73ZrJ9ZUGjQ~ and
http://download.novell.com/Download?...d=DHDMLrK5Wgc~ for the January
2013 Scheduled Maintenance release for OES11 SP1 inc. eDirectory.
Use "rpm -q <package>" to check which version of the package is
installed - this will also report if a package is not installed. For
example, to check which version of the ifolder3-enterprise package you
have installed use "rpm -q ifolder3-enterprise".
Given the number of novell-* packages updated by the January 2013
Scheduled Maintenance update I would use "rpm -qa novell-*|sort" to list
all novell-* package versions (note the "-qa" is needed because of the
"novell-*" wildcard).
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

ASA view maintenance release

We have a Cisco ASA 5520 and I need to view the maintenance release version. When I do a show version I see 8.2(5) and when I view the file in flash I don't see details of the maintenance number.
I'm checking our ASA due to the bulletin below where its mentioned to have 8.2(5.47) or 8.2(5.48) but I can't find the .47 or .48 on the ASA.
Thanks for any help.
Jeff
http://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-20140409-asa.html#@ID

The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.
Once you've reloaded with that version as your boot image, your "show version" will then show it as running.

Instance in distributed environment for 11.1.2.1 using maintenance release

Hi Experts,
As i plan for 11.1.2.1 using maintenance (from 11.1.2).
I need clarification:
as in 11.1.2 "Oracle EPM Instance name" was similar on all servers (D:\oracle\middleware\user_project; epmsystem1)
while in 11.1.2.1 "Oracle EPM Instance" should be different (D:\oracle\middleware\user_project; epmsystem1, D:\oracle\middleware\user_project; epmsystem2, etc....)
OR EPM ORACLE Instance Directory recommended on shared drive accessible to all machine.
In my case 11.1.2 is having similar instance name on all servers.
Please suggest
Regards
Kumar

Hi John,
Thanks for the help.
As per suggested document
When you configure in a distributed environment, provide a new, unique instance name as you configure each server. For example, if you are using the default instance name epmsystem1 on the >first server, and you keep the same naming convention on subsequent servers, you would create new, unique instance names on each subsequent server, such as epmsystem2, epmsystem3, and >so on. Is it applicable in maintenance release where all instance name are similar (epmsystem1) on all servers?
Does it mean i should modify and make it (epmsystem1, epmsystem2, epmsystem3....)?
Please suggest as i am not very sure
Regards
Kumar

Error When Installing Cisco ICM Maintenance Release 8.5(4)

Hi,
I've successfully installing ICM 8.0(1a),
My environment is Windows Server 2008 R2 Enterprise, Service Pack 1 x64.
Now I'm trying to install Cisco ICM Maintenance Release 8.5(4), but the error occurs,
the log is :
2014-09-03 14:09:27 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140903_140927_Maintenance Release ICM8.5(4).log
2014-09-03 14:09:27 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-03 14:09:27 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\{5ADEF78E-6528-46A7-AB78-D38F394ADE23}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-03 14:09:27 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-03 14:09:27 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-03 14:09:27 [Error] Unable to get patch info from the registry because SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) does not exist
2014-09-03 14:09:27 [Error] Error reading Display Name value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Product value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Base value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Major Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Minor Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Maintenance Release Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading RUP Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading LRP Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Featurette Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Installer Version value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Install Timestamp value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Uninstall Location value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Error] Error reading Prior CurrentPatch value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Information] Unable to read PriorCurrentFeatures value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Information] Unable to read Patch Language value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Information] Unable to read Features value from the registry key SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch) This is probably because this key was not in prior patches.
2014-09-03 14:09:27 [Error] One or more errors were encountered retrieving the patch information from the registry: SOFTWARE\Cisco Systems, Inc.\Patch\ICM\8.0\Patch\(Not A Patch)
2014-09-03 14:09:27 [Information] Installer cleaning up and aborting.
2014-09-03 14:09:27 [Error] See the installer log for more detail.
2014-09-03 14:29:48 [Information] All modal messages are now closed.
can anyone help this?
Thanks in advance,

Hi Chintan,
I've already installed MR 8.5(1), but the error still occurs when installing MR 8.5(4)
The Log is :
2014-09-02 18:13:28 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140902_181328_Maintenance Release ICM8.5(4).log
2014-09-02 18:13:28 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-02 18:13:28 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\2\{0F8C826B-7BE2-4513-81D8-1C3FC1D25DD9}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-02 18:13:28 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-02 18:13:28 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-02 18:13:28 [Information] CloseWindow: Now in; Window=Cisco Unified ICM/Contact Center Enterprise & Hosted Installation
2014-09-02 18:13:28 [Information] All modal messages are now closed.
2014-09-02 18:13:28 [Information] Checking whether current installed patchs is the one this installer is attempting to remove.
2014-09-02 18:13:28 [Error] The latest installed patch ICM_8_5_1_0_0_0_465 does not match this uninstall program.
This later patch must be removed before this uninstall can be run.
2014-09-02 18:13:28 [Information] Installer cleaning up and aborting.
2014-09-02 18:13:28 [Error] See the installer log for more detail.
2014-09-02 18:13:53 [Information] Cleaned out modal message buffer and stack.
Then I uninstall the MR 8.5(1), then try to install MR 8.5(3),
I've successfully install the MR 8.5.(3), then I try to install the MR 8.5(4), but the error still occurs,
The Log is :
2014-09-02 19:19:26 [Information] Logging initialized. Log File: C:\Temp\Maintenance Release ICM8.5(4)\20140902_191926_Maintenance Release ICM8.5(4).log
2014-09-02 19:19:26 [Information] Displaying new modal message, buffer empty: Initializing Patch Installer
2014-09-02 19:19:26 [Information] Manifest file location: C:\Users\ADMINI~1\AppData\Local\Temp\2\{FF1FBA60-1E9C-4068-A0E0-0704D8C43A5F}\{0202A80B-FA3B-48B1-A64F-62AD902E62F9}\PatchManifest.ini
2014-09-02 19:19:26 [Information] Patch Information folder is C:\icm\PatchInfo_ICM_8_5_4_0_0_0_336
2014-09-02 19:19:26 [Information] Initializing Version checking data structures with data from current system and patch.
2014-09-02 19:19:26 [Information] CloseWindow: Now in; Window=Cisco Unified ICM/Contact Center Enterprise & Hosted Installation
2014-09-02 19:19:26 [Information] All modal messages are now closed.
2014-09-02 19:19:26 [Information] Checking whether current installed patchs is the one this installer is attempting to remove.
2014-09-02 19:19:26 [Error] The latest installed patch ICM_8_5_3_0_0_0_170 does not match this uninstall program.
This later patch must be removed before this uninstall can be run.
2014-09-02 19:19:26 [Information] Installer cleaning up and aborting.
2014-09-02 19:19:26 [Error] See the installer log for more detail.
2014-09-02 19:19:49 [Information] Cleaned out modal message buffer and stack.
I haven't try to install MR 8.5(2),
is it must to install 8.5(2) first to upgrade 8.5(4) ?
Thanks

Symbian S60 Maintenance Release not detected

Is it possible to use the S60 3rd edition SDK Maintenance Release with mobile packager? The SDK is installed in C:\Symbian\9.1\S60_3rd_MR and the device is called S60_3rd_MR:com.nokia.s60 - default. The Test Configuration tool does not detect the installation.

Hi,
The later releases of the SDK are not supported due to compatibility changes. S60 SDKs are backwards compatible, but not forwards compatible, which means that you would only be able to target later devices.
We choose to include devices like the N73 because there were some 10million of these in the market.
Mark

Which maintenance release should I upgrade 12.1E trains (MSFC IOS) to ?

Hi Sir,
I have three Catalyst 6509 switches running the following IOS on the MSFCs:
Major Release: 12.1E
Release: 12.1(8b)E11
Platform: CAT6000-MSFC2
Feature Set: ENTERPRISE W/VIP
Filename: c6msfc2-jsv-mz.121-8b.E11.bin (128D/16F)
Major Release: 12.1E
Release: 12.1(3a)E7
Platform: CAT6000-MSFC2
Feature Set: ENTERPRISE
Filename: c6msfc2-js-mz.121-3a.E7.bin (128D/16F)
Major Release: 12.1E
Release: 12.1(11b)E
Platform: CAT6000-MSFC2
Feature Set: ENTERPRISE W/VIP
Filename: c6msfc2-jsv-mz.121-11b.E.bin (128D/16F)
I'm in the midst of standarizing all the installed 12.1E trains in my organization. In the light of the current "IOS Heap-based Overflow Vulnerability in System Timers" security advisory, I have the following upgrade options:
- 12.1(8b)E20 Date Released: 12-SEP-2005
- 12.1(13)E17 Date Released: 12-SEP-2005
- 12.1(23)E4 Date Released: 29-AUG-2005
- 12.1(26)E4 Date Released: 20-OCT-2005
I'm undecided whether to upgrade to 12.1(26)E4. No doubt, it has a lot more new features and the least bugs as far as MSFC2 is concerned. I'm okay with the new features but I value stability even more.
Anyone can advise whether I should upgrade to 12.1(26)E4 or just settle with 12.1(23)E4, etc?
Thank you.
B.Rgds,
Lim TS

Hi Prashanth,
I understand that each maintenance release will introduce new features or bug fixes, or both.
Comparing the features between release 12.1(13)E17 and 12.1(26)E4 (see attached file), only a handful of new features are unique to 12.1(26)E4. These features may have bugs which probably have already been resolved in earlier releases.
Looking at Release Notes for 12.1E (http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a008007f716.html), release 12.1(26)E4 has resolved a significant number of bugs.
So, I think I'd go with 12.1(26)E4. What's your thought?
Thank you.
B.Rgds,
Lim TS

Latest Designer maintenance release available on OTN

Oracle Designer and Oracle Repository 6i 4.9 and Oracle Designer and Oracle Repository 9i 9.0.2.7 are now
available for download from OTN. Customers may also download these via Metalink. See the Downloads section on the Designer page on OTN(http://otn.oracle.com/products/designer/index.html)
The Designer 6i Release 4.9 will supersede 6i 4.8 as the available download maintenance release. The 9i Designer Release 9.0.2.7 will supersede 9.0.2.6 as the available download maintenance release.
Support for Global Temporary tables has been added to this release for 6i and 9i. For more information on this see the release notes. For installation guides, bugs fixed notes and release notes please see Designer Online Documentation (http://otn.oracle.com/documentation/designer.html)
Regards
Sue Harper
Designer Product Management

Oracle 9i Designer full patch rel. 9.0.2.7 is available via download on OTN. I only have dialup which will make the download run for 25 hours. I would like to know where I can get this download on CDROM? I'm on Windows XP Prof. SP1.
Thanks,
Ken Janusz
Please reply to my e-mail address: [email protected]

PR Overall release issue

PR release strategy issue comes when Line items in PR added by two different persons, PR Release strategy(overall release) not getting triggered.
Release strategy is working fine if i create PR with only one user id.
Both id's maintained in classification.
Is this sap standard behavior??
Created PR 4201001933 line item 10. using User ID - 20061704
Triggered correct release strategy TD QH.
Added line item 20 using user Id - 345045 --- (release startegy gone)
classification Maintained for TD QH

We have a similar equirement since we have cost center as one of the characteristics in PR overall release strategy.
In our case we agreed with Business that the CC in the first PR line item will decide the release strategy. (Or the first CC of thefirst line item in case of multiple account assignment.) We wrote a small piece of code to achieve this, to enter that CC in ceban-kostl.
If your business requirement permits, you may follow this strategy, where user id of the first line item will derive release strategy.
Regards.
Satish Patankar.

Solution Manager 7.1 Upgrade - ST add on release Issue

Good day
I have the following issue where the ST add on's are = the target release of the upgrade. The release is only on a higher patch level in 7.1(SPS4)
The step is Configuration(3) in SOLMANUP, it will not get past the phase of deciding to keep the add on's, the error is:
For the following Add-on component(s) the KEEP YOURS decision is not longer valid,
since at least for one of the base components an Add-on upgrade has been included:
ST-ICO     (changed base component: ST)
ST-PI      (changed base component: SAP_BASIS)
ST-SER     (changed base component: ST-PI)
You need to change the decision of the above Add-on(s).
Any ideas?
Thanks

Hi Miguel,
I am using SOLMANUP, I am using the installation/upgrade software and using SPS 4 as my target release. I am using SPS4_upgrade.xml in my download directory.
If I try using SPS 2 with SPS2_upgrade.xml it produces an error because my patch level of ST-PI is already patch 5 in my current system(Solution Manager 7.01 EHP1), and SPS 2 of Solution Manager 7.1 ST-PI = patch 4, that's why I am using SPS 4 stack as it is a higher level that my current patch level of ST-PI.
The issue is that the mentioned ST add-on's are the same release as the target release, the only difference is the patch level. The upgrade recognises that the source and target release is the same, but will not let me keep with Decision = Keep
Thanks
Derek

Lightroom 4 (beta and current release) - Issue with Select Catalog screen - catalogs not displaying

I noticed this during the beta test version of LR4 and was hoping it would be corrected in the actual release (which I installed yesterday). Here's the issue:
When the Select Catalog window opens, catalogs will not display unless I click in the empty space in the window (first screenshot)...then they will appear one by one as I start to click (second screenshot) until all are displayed.
Does anyone have any suggestions?? These catalogs are NOT on a network drive, they are on my desktop machine (Win Vista 64-bit).

I have the identical problem.
LR3 worked perfectly. LR4 won't refresh the Catalog screen at startup without me clicking on each entry. Only when an entry is selected will it appear.
I have an nvidia GeForce 9800GT video card, supporting dual monitors.
I'm using Vista 64.
I just upgraded to LR4 64bit, and immediately had this problem.
I installed the most current video driver (2/12/2012) with no change in problem (or performance).
I have not noticed any other program having issues, and have not changed any hardware recently.
I am also noticing that LR4 is visibly slower than LR3, to the point where most sliders don't slide evenly, but jump in increments unless I move VERY slowly.
I've watched the processor load using resource monitor: it is not peaking over about 65% during slider actvitivity.
I have an Intel Core2 Quad CPU Q9550 @ 2.83GHz with 8 gb of ram.

Releasing issue

Hi Gurus,
We are using 3.1i system.when we are seeing the particular document number in FB03,it is showing nearly 20 line items.for a particular line item the business area is not picking.in document header i checked that from T.code(ck21,Releasing)the line items are posting automatically.they have done the releasing for 1st month of 2010.due to not picking up the business ares for a particular line item they are not matching the trail balance.Suggest on this issue.
Thanks in advance
Jana

Hi,
I am not sure if you are familiar with validation/substitution functionality =>
http://help.sap.com/saphelp_erp60/helpdata/en/27/06e23954d9035de10000000a114084/frameset.htm
With validation functionality you can ensure (for example), that there is no accounting line item without business area assignment posted.
With substitution functionality you can change/add/delete a lot of things within accounting documents before they get posted, maybe your business area is derived correct but substituted by mistake with business area 'blank'.
Best regards, Christian

SQL Server Maintenance Plan Issue

SQL Server Version:
Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Issue : Maintenance Plan - DB backup plan & TRN Log backup plan skipped / some times not deleting the old backup files.
Error : Failed to retrieve date for this request (Microsoft.SqlServer.SmoEnum)
Additional Informaiton
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
A Server error occurred on the current command.
The results, if any should be discarded (Microsoft Sql Server)
Any experts can help me to resolve this issue.
Thanks
drmrpush
MRVSFLY

Hello,
Same issue reported here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/601fd83c-c49f-4bf8-b69d-95431197652d/maintenance-plan-is-not-opening-on-sql-server-2005-sp2?forum=sqlkjmanageability
Please check solution on :
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3e53ba8b-ea23-4629-98db-43c80ba9888e/cannot-save-maintenance-plans?forum=sqltools
This problem occurs if some of the stored procedures while installing SP2 has not been applied successfully. So manually run the script below and it may resolve
your issue. It resolved ours and we went throught exact same process of re-installing several times.
                1)
First go to the folder Install . The default location is this = “C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Install “ .
Please post back still your issue not resolves.
2)
Then in this folder find this “sysdbupg.sql” .
3)
Please open this script with a nodepad.
4)
Then copy the
whole script and then paste it in the Query window of the Management studio.
5)
Then execute this script.
6)
Once this script has been successfully executed, The issue should be resolved.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Maintenance Release Issue - 11.1.2.0 to 11.1.2.3

Similar Messages

Maybe you are looking for