Maintenance view: add new entry under existing ones

Hi,
I would like to add a new entry in a maintenance view, but keeping the existing entries visible. That is, I want a new line to appear under the older ones, so I can see them, instead of opening a whole new screen with empty lines.
Thanks in advance,
Ivson

If you want to add new field in the view.
Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view.

Similar Messages

Change value of a control in a list item new or edit form depending on the page level view Add New Item being clicked.

I have a list which has a underlying infopath form for insert and edit a record.
The list has various views spread across different pages .
Now depending on different pages "New Item", a value for the form will have a corresponding value.
If there is a single line of text control in the list, and depending ona page name, the value for the single line text should be autofilled when Add new item is clicked.
How do i achieve that?
Thanks...

Hi,
According to your description, there are several list views in your list, there is a textbox control which holds the “Single Line of Text” type of data in your custom
form. When users click the “Add new item” button in one of the existing list views, you want the textbox control in the custom form to be populated automatically.
By default, when user clicks the “Add new item” button in a list view, the URL of the custom form page will contain the name of that list view page, thus, a workaround
which requires custom code can be like this:
After the form page loaded, we can extract the name of the list view page from the URL, then populate it into the textbox control immediately. This can be achieved
using jQuery.
About how to
get URL parameters of current page using jQuery:
http://www.jquerybyexample.net/2012/06/get-url-parameters-using-jquery.html
About
adding jQuery into InfoPath form:
http://riteshudupak.blogspot.com/2010/09/add-jquery-to-browser-enabled-infopath.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

How can we add new entry to a XML file?

Hi All,
I'm having problem to add new entry (elements &
attributes) to an existing XML file. I have created an XML file.
Few entries are there which I'm showing in a datagrid. Now, in run
time I have provision for new entry. I'm gathering the whole
entered information & preparing a string in the same format
what I have in XML file. But when I'm trying to add that entry to
my existing XML it won't work. How can I will be able to do
so?

Are you using appendChild()?
Tracy
BTW, this forum is for Flex Builder questions. Language
questions should go in General Discussion.

Add new entry to HUSSTAT

Hi All,
How can i add new entry to HUSSTAT transparent table ?
for example :
I want to add this entry to HUSSTAT
200 HU0000007100 E0006 X ...
some suggested to use FM HU_HEADER_UPDATE but what inputs should i give to this FM its not clear .

Perhaps I'm not using the right terms. Let me try and restate my problem.
I am now using the "Notebook" theme. I have already created some entries where I've changed the default "My Blog" and associated Latin on the yellow header on top of the page to what I want them to say (i.e., "Bill's Blog" and associated text). You can see an example of such an entry here:
http://www.billmarksteiner.com/BillMarksteiner/Bills_Blog/Entries/2007/8/27_Dell_repair..._MUCH_better_thanexpected.html
When I click on the "Add Entry" button, I get a page with a yellow border on top with the words "My Blog" instead of what I'd like, which is "Bill's Blog". The Title field and its associated blog entry text (again, Latin) is lower on the page, and I understand that this is necessarily pulled from the standard template because that is the main body of the entry, which one would need to edit to make a relevant entry. But I'd like to at least automate the header material on the yellow strip at top to say "Bill's Blog" instead of "My Blog", and have standard text up there that I create, not Apple.
I guess what I'm asking is if there is a way to edit the template itself so that hitting the "Add Entry" button creates a templated entry of my design. Or at least a templated entry containing my text vs. Apple's.

Distribute new entries against existing reference data, Integrated Planning

Dear Experts,
Within IP, I struggle with how to distribute new entries against existing reference data.
Example:
Reference data:
Product   /   Customer   /   amount
P1               C1                  100
P1               C2                  150
P2               C2                  120
P2               C3                  100
New data:(data entered on product level, therefore not assigd to customer yet)
P3          #                    150
How can I distribute product P3 to Customers with reference to the data on product P1 ?
Many thanks,
Erik Pos
Edited by: Erik Pos on Jan 5, 2010 3:52 PM
Edited by: Erik Pos on Jan 5, 2010 3:54 PM

Hi Hyma,
This documentation indeed indicates that you can use other characteristic values in the parameter group to be used for reference, good news !, but this is based on SAP-BPS ?
The SAP-BW IP documentationn does not include this information can you confirm this solution works for Integrated Planning using the conditions within the function distribute with reference data ?
Many thanks,
Erik Pos

LDAP: Recommended way to add new objectclass to existing entries?

Can anyone help me with the preferred way to add a new objectclass (with attrributes) to existing entries within a directory (via the javax.naming API)?
I have an application that uses a directory of users. Each user has objectclasses "top", "person", and "inetOrgPerson" with usual attributes.
The application needs to change to add a custom objectclass, say "ourAppClass" (and its attributes), to each existing entry within the directory. I have already successfully defined the schema for the objectclass within the directory.
I cannot find examples showing how to add an objectclass to existing entries. Creating brand new entries with custom objectclassess is straightforward.
When using DirContext.modifyAttributes must I define all the objectclasses again, or is there a way to send only the new objectclass and its attributes only?
Attributes attrs = new BasicAttributes();
Attribute classes = new BasicAttribute("objectclass");
classes.add("top"); // do I need these?
classes.add("person"); // do I need these?
classes.add("inetOrgPerson"); // do I need these?
classes.add("ourAppClass"); // in-house class
attrs.put(classes);
attrs.put("ourCustAtribute", "value1"); //
DirContext.modifyAttributes(dn, LdapContext.REPLACE_ATTRIBUTE, attrs);Does someone have a good example to follow?

I think I have answered my own question. I think I need to use a ModificationItem to add an attribute to the objectclass.
final ModificationItem[] classModification= new ModificationItem[1];
classModification[0] = new ModificationItem(DirContext.ADD_ATTRIBUTE,
new BasicAttribute("objectclass", "ourAppClass"));
dirContext.modifyAttributes(dn, classModification);

Add new tab under 'Sales Area view/Data' of Customer Master TransactionXD01

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

How to add new entry, in table on button click.

i have 2 input ,witch i am taking from numeric controls. this 2 input are use to calculat my output.
on button click i want these 4 things should go in the table.
now my problem is when i click the button previous entry in the table get lost...
plz help me to slove this problem.

When you want to preserve the existing values in a table or array, you need to use "Array -> Build Array". Wire the local variable of the table or array to top entry, and wire your new entry to the bottom. Depends on the dimension of the array and the postion you want to add. You might need to some array manupilations. Try out some of the array VIs to see how they work.
Joe

Add new Column to existing Primary Key

Hi,
I have a Primary key consisting of 6 columns. Now i want to add new 7th column to that existing key.
Do i need to drop the existing primary key and then recreate agian with 7th field or is there any other way?
Regards,
Jayesh

I think what Joel was really saying is that dropping/recreating a PK is the only way to change the PK column list in version 6 - 9. Who knows about in 10g? Though I doubt that this has changed.
If the table only has one or two more columns that are not part of the key you might consider converting the table to being an IOT (indexed organized table).
HTH -- Mark D Powell --

Add New Entry to a blog

If I start a blog and "fix" the blog entry layout. Is there some way to save that so I dont have to re-design it every time i wanna make a new entry?

Perhaps I'm not using the right terms. Let me try and restate my problem.
I am now using the "Notebook" theme. I have already created some entries where I've changed the default "My Blog" and associated Latin on the yellow header on top of the page to what I want them to say (i.e., "Bill's Blog" and associated text). You can see an example of such an entry here:
http://www.billmarksteiner.com/BillMarksteiner/Bills_Blog/Entries/2007/8/27_Dell_repair..._MUCH_better_thanexpected.html
When I click on the "Add Entry" button, I get a page with a yellow border on top with the words "My Blog" instead of what I'd like, which is "Bill's Blog". The Title field and its associated blog entry text (again, Latin) is lower on the page, and I understand that this is necessarily pulled from the standard template because that is the main body of the entry, which one would need to edit to make a relevant entry. But I'd like to at least automate the header material on the yellow strip at top to say "Bill's Blog" instead of "My Blog", and have standard text up there that I create, not Apple.
I guess what I'm asking is if there is a way to edit the template itself so that hitting the "Add Entry" button creates a templated entry of my design. Or at least a templated entry containing my text vs. Apple's.

HT4528 i have a verizon iphone 3G; apple recently upgraded the operating system. PROBLEM: calendar has wiped out all entries and i am unable to add new entries. Help!

have verizon iphone 3g; recent upgrade of operating system. suddenly calendar has wiped out all entries and am unable to add new ones.

Please define "tried to add the Image"?
OS Installer Packages do not point to "images". They point to the complete set of source files including the directory structure from the media.
Is there a specific reason you are using OS Installer packages though? In general, there is no reason to use them anymore (unless you are actually still deploying XP).
Jason | http://blog.configmgrftw.com | @jasonsandys

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

How to add new class to existing DC (Web Dynpro project)

Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
Jeroen

Hi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc

Maintenance view: add new entry under existing ones

Similar Messages

Maybe you are looking for