Major problem using Nokia Test Message Editor

Using Nokia Test Message Editor on PC Suite 6.83 to create a new message (via USB cable), when I click on create new message (works fine) and then when I click on the "To" button, it says error. It asks me to close program as it has performed an illegal operation. Whys that? The only way I can currently get it to work is by manually entering the phone number but just cant use teh To button.
whats wrong?

No that's not helping, "oh boy".
I tried to Repair PC Suite from the Unistaller, same error.
Then I uninstalled PC Suite, restarted, ran PC Suite Cleaner 3.5 to get rid of registry settings and files. Then I noticed some old data in Application Data\PC Suite (old IMEIs) which I all deleted, then I restarted again and installed the newest PC Suite back. It asked me to install MMSync onto my phone, which I did. (see separate bug report on that
Then it gave me a message that some "Old Contact Browser data was found and has been moved to a separate folder", which I think is somehow related to the Contacts bug which I had described for a previuos PCS version, under my old nick "zak1974". Feeling good and all hopeful at last, I launched the Contact browser and it got all contacts with no problem, I went to Messages - Inbox. Clicked on Create New Message button, then "To" - only to find the same bug, which I am perfectly able to reproduce and describe on any level reaqired, as I have saved all screenshots and messages on the way to the Text Message Editor crash. All the above gives me some right to declare a software/firmware bug with the versions of products I had described in my first post.
Any other ideas?
N95 - King of Photos

Similar Messages

  • The Demerits of Nokia Text Message Editor.

    The Demerits of Nokia Text Message Editor.
    Following will be disscussing the demerits of Nokia Text Message Editor.
    1). Firstly Nokia Text Message Editor does not support CDMA handsets. I know that there is no FBUS cable option for CDMA phones, but why Nokia is not providing it i dont understand. I have been requesting for the same fron a very long time.
    2).The Nokia Text Message Editor in the new Pc Suite is very slow. I mean it takes a lot of time send a sms. The versions are 6.83 and 6.82 which r very slow. The earlier version 6.81 sends sms very fast, so i use the old version. If u reply a sms it takes nearly 2-3 mins to reply. and that also i not guranteed.
    3)There are no shortcuts defined for using Nokia Text Message Editor. Like Reply should with Ctrl+R, Forwad sholud be with Ctrl+F,send sms with Ctrl+S etc. Theres only option of New with Ctrl+N. I think Nokia sholud provied all the shortcut keys to make Nokia Text Message Editor more savy.
    I will disscussing more as per the response.
    NeVeR brEaK a heArt......!!!!
    =========================

    Moderators are here, I can assure you!
    But we're here just to moderate - we're not able to help or offer advice. If you want feedback from Nokia, you should use the 'Contact Us' link at the top of the page.
    Board Mod Team
    READ THIS FIRST!
    Click here if you want help from Nokia

  • Not Able to send messages using NOKIA TEXT MESSAGE...

    Hi,
    I am not able to send messages using text message editor. I am having N70. I also have the latest PC suite and latest phone software. Whenever I try to send message, a message appears "Unable to send". It does not even give me the reason. I have connected my phone using data cable and I can transfer music, syncronize and do other stuffs.
    Can someone suggest what needs to be done to send messages using PC??
    Thanks in advance.
    Raghu.

    Hello,
    i am having the same Problem.
    I cannot send any sms via my phone (N70) nor via the latest Pc Suite. It also just says "Unable to send" with no reason.
    I am on:
    V5.0705.3.0.1
    30-01-07
    PM-84
    Model: N70-1
    Code: 0530495
    Any help is much appreciated. :-)
    Kind regards,
    Thorsten
    Message Edited by deeplook on 01-Jul-2008 08:59 PM

  • Use of test message button in Component Monitoring

    Hi All,
    We can't send message from adapter Engine where as we can do through Integration Engine from component monitoring of RWB.
    Then What is the use of send message button in Adapter Engine from component monitoring? Please comment on this.
    Is there any why to send message though Adapter engine from RWB? if so please provide the related blog.
    Thanks

    Hi Chinna,
    >>You can always get the target payload using test button in message mapping.Right?
    What i was trying to say is , say you have a incoming message. You want to send it directly to adapter engine. In this case the mapping would have already happened as you mentioned before. What i asked you to do is test the mapping in Integration Repository with the incoming payload.
    You can then use the target message to send directly to adapter engine.
    >>GIve the username as PISUPER or PIAFUSER. It will work for sure
    I have tried this so many times. Kindly confirm with basis team if the password which you are entering for PISUPER or PIAFUSER is the right one. Try to login using SAPGUI with username as PISUPER and the password as PIAFUSER.
    If the password works then try again in RWB .
    If it still doesnt work do post a message again.
    >> It is possible to send the message to Adapter engine which originate the message processing at IE?
    Not sure what you mean by this. Just want to say it is  possible to send message directly to adapter engine for test purposes.
    Regards,
    Sumit
    <i></i>

  • Major problems using Keynote 09 with Keynote 08 files

    Keynote 09 seems to have been let out into the wild a bit too early. I have encountered several major problems when using it on older KN08 files. From the Scroll bar in outline view, to almost every movie or sound file being corrupted and requiring a "reinsert," to an annoyingly common problem with images losing their formatting. It seems that the new file format in KN09 does not play well with KN08 (this was not the case with any of the previous version upgrades).
    I have contacted Apple and shared these problems with them. I have removed KN09 from all my machines and have reverted back to KN08. Hopefully a future patch will correct this file corruption problem

    I have contacted Apple and shared these problems with them. I have removed KN09 from all my machines and have reverted back to KN08. Hopefully a future patch will correct this file corruption problem
    Your presentations sound like they are much more involved and memory intensive than mine. I only have a couple with movies/sound and those are quite short. So far (knock on wood) I've not had any of your problems. However, as a matter of course I always create a backup file before starting to edit an old important file with a new program. Keep us posted.

  • Problems using Nokia Messaging on E61

    Hi all,
    I'm new here so I appologize if the problem has already been reported or if I'm using the wrong part of the forum for this issue.
    After having installed Nokia Messaging (of which I'm pretty satisfied) I cannot access the options button at least on agenda entries and on the gallery files. This happens after opening the entries/files.
    Has any solution been already found for this issue?
    Thank you very much!

    Hi all,
    I'm new here so I appologize if the problem has already been reported or if I'm using the wrong part of the forum for this issue.
    After having installed Nokia Messaging (of which I'm pretty satisfied) I cannot access the options button at least on agenda entries and on the gallery files. This happens after opening the entries/files.
    Has any solution been already found for this issue?
    Thank you very much!

  • Major Problem w/YouMail APP Message won't GO Away... HELP PLEASE, Can't Use Phone

    05-30-2010 09:28 AM
    I tried to download YouMail from BB App world on my BB Curve 8330, it downloaded and I have a message on my phone that will not go away when I click on OK... the message reads: "
    The application YouMail has attempted to open a connection to a location inside the firewall and outside the firewall which is not allowed by you IT policy" then there is an OK button... I have clicked on this and nothing happens, I have tried several battery pulls and still nothing.  Right now my phone is unable to be used. It is stuck. Over an hour trying to fix so I came here hoping for some help. Thanks.
    Can anyone help??

    This is the music store forum area. Perhpas you'd have better luck in the iPod forums, and post more detail about your iPod.
    http://discussions.apple.com/category.jspa?categoryID=146

  • Problem using Aperture as external editor for Photoshop CS5...

    I am having trouble using Aperture as my external editor for Photoshop - if, for example, I select twenty photos and choose "edit in photoshop CS5," for some reason or another, only ten or twelve photos will show up. Some photos are always missing, and there seems to be no rhyme or reason to it. Has anyone else noticed this? It is really frustrating and slowing my workflow down immensely. Any words of advice would be greatly appreciated!

    Hi Casey.
    First lets make sure we have the flow going the correct way.  You are using Aperture, and use PSCS5 as your external editor (external to Aperture).  Right?
    Second, what size are your Masters?  When you use PS directly (not calling it from Aperture) do you regularly open twenty files at a time?
    My Masters are about 25 MPix each.  PS sizes them in the 140 MB range.  Opening twenty of them at once -- for me that's about 3 GB of data -- will probably bog things down.  Does the problem occur if you open just, say, five at a time?  What's your hardware?  How do you have PS set-up?
    And -- my top suggestion for improving your work rate: do in Aperture as much of the work as you can, and send out to PS as little as possible.  You don't say what kind of work you are doing, but Aperture, for many, suffices for almost all of there photograph processing needs.
    Message was edited by: Kirby Krieger -- some minor changes.

  • Problems with nokia N8 messaging

    i juz bought N8 and there was a problem with the messaging.Under saved sent messages,you either put a NO or YES if you want to save or do not want to save your sent messages.But in this case,putting a NO,my mesages are still been saved.I've sent to nokia care centre,and even after updating the software,the problem still exist,and to my surprised they could not do anything else to rectify.I was advised only to wait for the newer software.And the staff whose using his N8 also has the same problem which he didnt realised.So to all N8 users,pls try to check this on your phone.What should i do next????

    My N8 does exactly the same, it's obviously a software problem!

  • WLAN Connectivity problems using Nokia 5800 Xpress...

    Folks,
    I really need help here.
    I am trying to connect to my company WLAN called BLUESSO.
    The visible config settings required to access this hidden WLAN access point are as seen in the attachment also seen below:
    SSID: BLUESSO
    Encryption type: TKIP
    Network Authentication: WPA-Enterprise
    EAP Method: PEAP
    Inner EAP Method: GTC
    Validation Server Certificate:  Any Trusted CA-
    Server Name: wlan.xx.com
    My Phone is a Nokia 5800 XPressMusic
    Firmware: 31.2.101 14-10-09mRM-428 (C)NMP - Latest Firmware
    My Settings are:
    I set up my phone as follows:
    Data bearer: Wireless LAN
    WLAN Network Name: BLUESSO
    Network Status: Hidden
    WLAN NETWORK MODE: Infrastructure
    WLAN Security Mode: WPA/WPA2
    WPA2 Only mode: No
    WLAN SECURITY SETTINGS: EAP
    EAP Plugging Settings:
        - EAP-PEAP
                            Personal Certificate: Not Defined
                            Authority Certificate: Thawte Server CA Tha.....
                            User Name in use: User Defined
                            User Name: 212058402
                            Realm in use: User Defined
                            Realm: wlan.ge.com
                            TLS Privacy: Off
                            Allow PEAPv0: Yes
                            Allow PEAPv1: Yes
                            Allow PEAPv2: No
                                                    EAP-GTC
                                                                     User Name: 212058402
    Advanced Settings:
        IPv4 settings: automatic
        IPv6 settings: automatic
        Proxy server address: gems.setpac.ge.com:1533/pac.pac
        Proxy port number: 1533
    I can see the BLUESSO Access points.  Signal Strength is always between 80% and 100%
    1- Unfortunately, My phone is able to connect. Is there something wrong with my setting?
    Any suggestions?
    2- I also have the ability to connect using the 802.1x protocol used by Apple machines. Can you advice on settings please?
    3- Is WPA Enterprise same as WPA2 in my phone or is there a special pluggin I have to download to get and WPA2 Enterprise security feature?
    4- How to I access the TKIP encryption in my phone?
    Can somebody provide me with some technical advise?
    Thanks in advance
    Joe
    Nokia 5800 XpressMusic
    V 40.2.005.236.04
    Type: RM-428

    Update to my Network Connectivity Dilemma.
    Please correct me if I am wrong.
    It seems I can use 802.1x WI-FI Security mode authentication to connect to WLANs that are configured for WPA2 Enterprise  since both authentication methods use the same security settings in a WLan Infrastructure.
    They both have EAP with similar EAP Plug-in settings.
    If this theory is correct, then I can use my Nokia 5800 to access a WPA2 Enterprise authentication Wlan with the 802.1x WI-FI Security mode.
    Objections any body?
    Monk
    Joe
    Nokia 5800 XpressMusic
    V 40.2.005.236.04
    Type: RM-428

  • 6100 connectivity problems using Nokia CA-42 cable...

    I have PC Suite 6-85-14-1 - the latest as at 11Feb'08, a new Nokia USB CA-42 cable, as listed for the 6100. The PC is recognizing the cable, but there is no recognition of the phone, within PC Suite.
    I am attempting to download all the contact information and so on, from the 6100, to transfer to a new E51.
    Incidentally, the E51 connection with its own cable to PC Suite, works perfectly. It is the 6100 connected through the CA-42 cable which is the problem.
    Any solutions on offer?

    Paulprior.
    Just checking here that you need to have the drivers installed for your cable+phone.
    If you have CA-42 cable, you should install Nokia PC Suite from
    www.nokia.com/pcsuite
    If you have DKU-5 cable, you need to (inaddition to PC Suite above) install DKU-5 cable driver
    http://www.nokia.co.uk/nokia/0,,86571,00.html
    If your cable is NOT genuine Nokia cable, it may require cable drivers provided by the cable manufacturer, but the cable might work with Nokia drivers also.

  • Problem Using Nokia GPS for Free

    Hi, so I own an X6 16GB for T-Mobile without a data plan and yesterday I was driving and got slighty lost, decided to open up the map because I knew where I was supposed to be going and wanted to confirm the streets I was driving on were matching up.
    A few minutes later when I look at the map I notice that the red dot is moving in real time with my driving, meaning I'm online somehow. This was a suprise to my since I have no data/online plan for my T-Mobile contract. I then get curious, enter an address and the phone starts working like a regular GPS device telling when to turn, how far away I am etc.
    A little later I notice that it says I'm connected T-Zones or something like that and shows that I'm sending and recieving 'packets' so I panic and immediately disconnect uncertain whether or not T-Mobile will bill me for data and here is where it gets complicated.
    A day later I go to My-tmobile website to see my plan usage because they update all your activities every few hours and under the data usage section it shows 0kb sent and 0kb recieved even though 24 hours ago when using my GPS it said I had sent and recieved several hundred kb. I'm confused now though, so is that the GPS function is free from Nokia but I still have to pay for connections from my carrier or it's free even without data connections?
    Thank you.

    Go to maps>settings(spanner bottom left of screen)>internet>connection and set to Offline. Then go to Menu>applications>Location>Positioning>Positioning methods and make sure only Integrated GPS has a tick next to it. That way the GPS will not connect to your network and will rely on the satellites for navigation.

  • Major problems using DV cam with external drive connected. HELP

    I am running Final Cut Pro 5.0.4 and Quicktime Pro 7.0.4 and I want to use one of my external Firewire drives as my scratch disk, and when I connect my Canon GL2 FCP either crashes if it is open, or hangs when trying tro start uo if external hard drives are connected. As I need to use an external to capture to I really need to resolve this A.S.A.P.
    Thanks in advance for your reading and replying to my post,
    Sebastian

    firewire external hd is a perfectly acceptable medium for capturing footage. it works pretty flawlessly and has little issues or problems
    This type of blanket statement really can't be supported in my view.
    There are issues with single bus firewire captures.
    And many cams, including Canons, don't play well with firewire hard drives on the same bus.
    Glad it works for you, but that's doesn't mean it works for everyone.
    You might want to take a peak at this:
    http://www.adamwilt.com/Tidbits.html#FireWireFrustrations

  • E52 Message Editor: Already in use (error)

    Hi guys!
    Has anyone else experienced this message editor error in the E52?
    I had this even before the FW update and even with the current FW 022. It still doesnt solve it. Whenever i try to reply to someone, it sometimes gives me a message box with an error message stating: message editor: already in use. I have tried to recreate the scenario but couldn't. i have also tried looking for patterns whenever it occurs but i haven't found one. 
    If anybody experienced this error too, was yours resolved after the FW update? Or is there anything that I can do to resolve it? It's really annoying. I bought this so i can make calls and send messages, other features come in second -- basic features should at least have been perfected.
    To all those who will share their inputs, i will be really grateful. Thanks!
    Message Edited by 31stfreak on 29-Nov-2009 12:58 PM

    hi,
    plz check whether the email application is running in the background. in the E52, i've noticed that until u explicitly exit the application by clicking 'exit', the application is left running in the background. it might be the cause since the email and text message application uses the same message editor.
    hope this helps.
    Az
    Phone Usage History:
    Nokia 3210 -- Nokia 8210 -- Ericsson T28 -- Siemens C35i -- Nokia 8250 -- Nokia 8310 -- Nokia 6100 -- Nokia 6230 -- Nokia 5310 XpressMusic -- Nokia E52

  • Unable to find channel ID - using Test Message in RWB

    Hey all - we are using the Test Message tab of the RWB, and we get "Unable to find channel ID" as the response to our message being sent.  We are clueless what this means... since this is supposed to send straight into the engine, I'd expect something like "no interface determination" or sometimes similar - but we can't figure out what this error means.  This is the message we get, regardless of payload or interface chosen...  We even chose an interface that has already been tested & is running successfully into XI via the JMS adapter, so we know the actual path thru XI is valid. 
    Help is appreciated - I'm sure this is something silly we don't have set up that we need...

    We were hitting the Test tab after clicking the AF in RWB - you should choose the engine... it likes that much better. 

Maybe you are looking for

  • Can't install due to "registry" and "dll" error messages.

    I can't install any Adobe products. This occured after a complete reinstall of my Windows XP - if that has anything to do with it. I have done a reinstall before without any problems. I keep getting error messages about "missing registry" and "dll"s.

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All, When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error: "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent". Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  i

  • Lightroom color labels lost on transition from one pc to another

    I started using a mac laptop in the field and always used windows pc at home. A portable hard drive holds the lightroom catalog. It's fat32 formatted so it can be used by both mac and windows. A catalog made by the mac lightroom opens fine in windows

  • WLC 5508 , AP client dhcp address different from WLAN interface VLAN subnet?

    Hope the title makes sense, here's my situation: I have multiple businesses on 1 WLC 5508, there's a LAG to my core switch with seperate interfaces for each, broken up by vlans. My question is: if i have a WLAN setup to use interface "Company A" whic

  • Question on iSetup and the files used

    All I have a customer on 115.10.2 and they are using iSetup to transfer data from their Hyperion DRM instance into their Oracle E-Business Instance. The customer is moving the key flexfields data from the Hyperion DRM Instance to the Oracle E-Busines