Make frame freeze problem

Two problems I have....
1st problem...when I make frame freeze, the filters disappear. How do I keep those clips with filters stay look same. Some clips are fine...no problem. But other clips when freeze, filters gone.
2nd problem...I decide to use QT conversion to save still image but the pixels ratio into 4:3 which it should not be.... video is 16:9. How do I keep 16:9 when export still image?

My freeze frames usually take on the appearance of my clips with whatever filters I have applied. What you see of the freeze frame is often affected by which tracks are auto-selected in the timeline.
As far as the pixel aspect ratio is concerned, if you are staying within FCP, the pixel aspect ratio should be compensated for. However, if you need to create a still that looks correct at square-pixel dimension, you'll need to resize it in photoshop (don't forget to de-interlace it as well). The square pixel image size I use for 16:9 stills iis 864x480.
Hope this helps -
Max Average

Similar Messages

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

I am having difficulties in maintaining a facetime connection through my ipad. It will generally work for 20 seconds or so and then the frame freezes. It is difficult to follow our 2 year grandson. Any fixes?

I am having difficuties in maintaining a Facetime connection through my ipad 2. It will generally work for 20 seconds or so, and then the frame freezes. Sometimes we have audio with a freeze frame picture. It is difficult to maintain the attention of a 2 year grandson anyway, but the the lost connections make it impossible. Any fixes?

This is a connection problem with wifi. Either your wifi is failing, or your internet service is not fast enough for video feed.

I know how to fix the iTunes 7 / firmware ver. 1.2 freeze problem

Many of you (like me) are having major headaches because of the new updates that Apple has been releasing (i.e. iTunes 7). So far I only know that this affects the Video iPod, but this could very well fix other models too.
Here are some symptoms of what the following will fix, and what you most likely have already done to try and fix it.
- iPod keeps freezing after a few seconds ever since you updated to iTunes 7 and/or iPod software ver. 1.2.
- iPod will remain in Do Not Disconnect mode even after ejecting or disconnecting
- A forced reset does not fix it, as it repeats the above.
- Restoring the iPod through iTunes does not help
So, here's what to do.
The old iPod updater software is how you will fix all of this. Unfortunately, because iTunes 7 thinks that it's better and more up to date, it will prevent you from opening the old version of the software if you still have it on your machine.
So first of all, uninstall iTunes 7.0. (You do not have to remove your library information, just the software.) Restart the computer.
If you still have the old iPod updater, try it and see if it runs. If it does, read on. If not, skip to the next paragraph. So, if it does run, simply hit Restore and you can go back to a previous version of the firmware. I believe that Apple discontinued the firmware page since releasing iTunes 7. Look around some search engines like Google if you really want the latest firmware.
Take out the installation CD that came with your iPod. Run it and it should install the old iPod updater along with iTunes 6.x. iTunes 6.x cannot run since iTunes 7 changed your libary's formatting, but that will not be a problem. Run the Restore process in the old updater and it should be alright for you to start loading your stuff on again without problems.
Since iTunes 7 reformatted your libary listing, iTunes 6 will no longer work. However, you can still use it by reinstalling iTunes 7. Just make sure you do the following.
TO KEEP THE SAME THING FROM HAPPENING AGAIN
iTunes 7 is actually alright. It's the updater part of it that will screw up your iPod.
- iTunes 7 will tell you that a new iPod software version is available when you open it.
- Check the "Never Ask Again" box and click Don't Install.
- When you sync your iPod to your computer, NEVER touch the Version section when you're changing your iPod's settings. Everything else is alright to work with.
- Everything will work fine as long as you never update the iPod's software via iTunes, at least until the programmers can fix this issue in a later release or patch.
I hope this helps out a lot of you. Pretty lame of Apple to miss something this big during debugging.
Custom Windows XP

Listen to this person, he knows exactly what he's talking about. My unit had the freezing problem, the visual artifact problem, and eventually would only show a blank white screen after I had tinkered too long. Luckily I have another computer that I hadn't yet upgraded to itunes 7 and it had the last firmware upgrade before the itunes 7 one. From disk mode I was able to restore it to the previous firmware version, and now the ipod works perfectly.
I too am almost disqusted with Apple for 1) missing this problem and 2) not letting people know!
I wonder how many more people are going to have lots of problems so apple can protect their PR.
Anyways, what would be really helpful would be if someone could upgrade the latest firmware installer before itunes 7 (it's an individual ipod updating program, not itunes 6.xx)somewhere on the internet so users could download it and do away with this evil 1.2 firmware.

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

Slideshow Frame Freeze

So I created a Blu-ray project in Encore CS4 and created a slideshow with random pan and zoom. I created a Blu-ray disc with the slideshow on it and when I went to play the slideshow on my Blu-ray player, there would be a frame or two where the picture would just freeze during it's random pan and zoom on every picture in the slideshow. When I exported the Blu-ray project as a DVD disc, the same frame freeze did not occur. Has anyone encountered this?

I have the same problem with burning regular DVDs. The picture freezes on several pictures and you have to hit 'play' to continue. I have tried two different DVD burners and played the DVD on three players. Burned two DVDs and the freezes are at the same location.

Sync and frame rate problems importing video to Flash CS3

Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3.
When I export a video from Premiere with the settings:
1280x720
frame rate of 23.976
using H264 or Animation (basically every codec produces the same results),
"embed video on SWF and play in timeline"
When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either. Can someone out there please tell me how to make this work? Any help would be GREATLY appreciated!
-Mike

Thanks for you quick response however it really doesn't apply to what I am doing in any way. I will not be uploading the video to a server. I am using the imbed function so I can use it as a layer and then animate over it. It is just reference and will ultimately be deleted. The Fla file does indeed carry the same specs as I stated in my first post. I have done it this way dozens of times and I am trying to figure out why it suddenly will not work.
~Mike

New v11.5 makes Firefox freeze: Is there a remedy?

Blithely downloaded v11.5 today. Opened my regular bridge application in Firefox, bbo (bridgebase.com) and the Flash player froze Firefox (v 16.0.2). I'm on Vista Premiium.
Ctrl+Alt+Del said Flash Player was using 90-100% of my cpu.
I uninstalled v11.5, found v10.3 at the adobe site, reinstalled that, and everything's working.
Surprised v11.5 wasn't tested to avoid such a problem. Anyone know a remedy?
alanpmcd

(1) I've already, some time ago after previous Flash problems, taken
step 1 in the trouble-shooting, i.e. disabled Real Player Record plugin
(2) I've removed v11.5 to install v10.3. This morning (uk time) I
can't seem to get back to download v11.5. Every route I take to
download takes me to v10.3. And this version makes my bridge work
So for the moment I'm happy, though I'd be glad to try more
troubleshooting if you can tell me how to get to download v11.5.
>
Re: New v11.5 makes Firefox freeze: Is there a remedy?
created by Chris Campbell
<http://forums.adobe.com/people/chris.campbell> in /Using Flash
Player/ - View the full discussion
<http://forums.adobe.com/message/4834269#4834269

What are the symptoms of the capacitor freezing problem?

I'm concerned that the freezing problems of my eMac that I've posted about on earlier threads results from a bad capacitor. Are there specific symptoms of that problem that would indicate my eMac should be checked by Apple? My computer falls within the range of serial numbers where this could be the issue.

The Apple warrantee extension program only refers to video and power problems, not freezing. The most sure-fire way to check if you have bad caps is to open the access door at the back of your eMac and look at the logic board next to the RAM slots. There are two little objects that look like 1/4 of a AA battery. (Googling "capacitor plague" should get you some pictures of capacitors if you're not sure what to look for.) If the top of either or both of them is cracked, swollen or leaking a discharge you know for sure that you have bad capacitors and Apple should have no problem fixing things for you. If you don't see any of those things, it might still mean that you have bad caps but they haven't shown it yet.
If you do plan to open your eMac, it's a good idea to put a towel on the desk so that you can avoid scratching the screen. It makes it more secure, too, and no doubt more comfy for your eMac.
eMac 1.25 GHz Mac OS X (10.4.7)

Ghosting effect - Is it a frame rate problem?

I've just made a music video lyric video (I'm still really new to movie editing) and there's this ghosting effect. Does anyone know what may cause it? Is it a frame rate problem, or the frame blend thing?
Here's the cliup on YouTube: (You can really see the ghosting when you watch it in HD.)
I'm using Adobe Premiere Pro CS4 on Windows 7 (32 bit)

hmm, looks like you need to read a few things maybe...to understand some stuff.
Here's some links I got from google for you
NTSC
Short for National Television System Committee. The NTSC is responsible for setting television and video standards in the United States (in Europe and the rest of the world, the dominant television standards are PAL and SECAM). The NTSC standard for television defines a composite video signal with a refresh rate of 60 half-frames (interlaced) per second. Each frame contains 525 lines and can contain 16 million different colors.
The NTSC standard is incompatible with most computer video standards, which generally use RGB video signals
============
info about aspect ratios... and better to scale down than up...or just stay the same as source.
http://www.techsmith.com/tutorial-camtasia-understanding-dimensions-prior.html
================
Soooo, you didnt export ntsc and it looks like you upscaled to 1080p but a different fps than original also.
In gereral if you start at say 24fps and make it 30fps, your editor has to "make" new frames ( add 6 per second ) and it does that by creating new frames out of what you have on timeline. Sometimes a VBR 2 pass will give you better results than 1 pass, but you have to experiment a bit ( just export small section of timeline for tests...and try to use area where you see your "ghosting" ).
good luck

"right click" event make application freeze

Hey,
I've just installed a fresh version of mountain lion, up to date (10.8.2).
I got serious problem with "right click" action, on certain applications like "utorrent" or "adobe audition CS6", it makes them freeze then not responding.
same with "alt-left click".
Does anybody have experience the same, or got an idea why it does that?

I had this exact problem as well. Right-clicking in uTorrent or iMovie made the app freeze and I was left with the spinning beach ball until I forced quit.
I tried OnyX like you suggested. Rebuilding LaunchServices is what fixed it for me.
In OnyX (free), go in the Maintenance tab, Rebuild sub-tab, check "LaunchServices" and click the Execture button.

Lumia 920 restaring and freezing problem !!!

dear sir/madam,
I have bought Nokia Lumia 920 four months back. I have been facing restart problem the day I bought it. I went to Nokia care twice (khobar,SA). But still im facing the same issue. Every day it restarts 2 to 3 times. And sometimes im facing freezing problem also...once it get freezes I need to do hard reset, whenevr I do the reset, time and date changes to Sept 2012. Its really annoying. I'm fed up of using this phone. And im not at all satisfied with the service. When evryone was suggesting me to go for iPhone 5, I stood on Nokia Lumia 920. But these issues makes me to feel that I took a wrong decision. I had spent too much money this mobile but not worth it. I need to travel 100kms to reach Nokia care. That too on working days. Please make it worth when I go next time. Else I will SWITCH TO IPHONE!!!

now my phone got freezed and not booting up...i tried hard reset everything still..its dead from d past 2 days....pls help

Blackberry Tour Youtube problem/facebook and phone freezing problem

ok any time i go on youtube to watch a video it never works i always get this error thing that says:
in the top right corner it says Error Playing in red
and then a box opens and says "An error has occered attempting to play media." and then all i can click is Ok
and this has only been since i installed the buzzmetin app and then removed it cause it was just pissing me off
also i docked my phone with my pc to add some music to the media card thats about it.
and now for some reason i cant view youtube videos.
normal videos saved on my media card work fine just youtube from what ive tried.
and then the other problem is with facebook
ever since i connected to my pc and got that app its adding all the pictures of my facebook firends to when they call me. I DONT WANT THIS
and i already went through all the settings and checked them not to show but for some reason it still does?
and also when ever i go to my friends list through the facebook app it starts freezing like mad even though its already loaded.
so anyone have any advice i can use to fix these two problems? mainly the youtube one
the facebook problem is just bothering me but i just use the mobile browser app to get to facebook now for the time being.
ive had my phone for about a month now.
with bell service.
can anyone help?
OH and just on a side note incase anyone can help its pretty simple
is there any way to change the blue tooth access password for my phone?
mine is by default 0000 and i wanted to change it to something different so people cant just access my phone when i have the blue tooth on

YOUTUBE has not release an app for Blackberry Tour yet. The only option you have is to download an app called Vision (http://vision.metova.com/download) I do have BuzzMe app and still watch videos on my phone. Hope that helps! As for your freezing problem, make sure whatever app you open..ie, internet, games, google maps....make sure you close it fully. One way to make sure your BB is as fresh when you wake up in the morning, download an app called Quickpull Lite. Good luck...

Nokia C7 freeze problem

Hello. I use Nokia C7. All works fine but often when I surf the web browser, use skype, search updates and doing many other things my Nokia C7 freeze and dont (cant) resart. Only option to restart the phone is remove and insert battery. How to FIX this problem?

This problem has nothing to do with applications added or needing software updates. It is purely a hardware problem, there seems to be a fundamental flaw with the design of Nokia phones, and it is very disappointing that they are not more honest about the problem.
My Nokia C7 seems to freeze frequently when processing CPU intensive processes especially, such as trying to watch videos on the BBC iplayer or Youtube, but can happen anytime. The pattern seems to be with these phones (and the N8) that these freezes happen quicker and quicker as time goes on. It is just not good enough to say take the battery out, which is the ONLY way to reboot the phone, do other phone users of different manufacturers have to do this? Not in my experience.
I find it incredible that Nokia, with its dwindling share market, can release these phones without having fully tested them properly. You may have gathered that I feel rather disgruntled with Nokia, I have always had Nokia phones but I am now regretting my decision to start a new contract with this phone. I like it and the features, but what point is there in giving you applications such as the Navigation and the iplayer for example if you can't use them because of freezing.
I will be sending my C7 off for repair next week, in the hope that they have sorted out their hardware issue, but I say beware to anyone else with this phone. If you have had occasional freezing problems, then they will in all likelihood increase as the internal hardware degrades.

Make frame freeze problem

Similar Messages

Maybe you are looking for