Make Indicator "check bw master data" mandatory when creating CVC in MC62

Dear All,
There is a requirement to make the indicator "check bw master date" mandatory while creating CVC using tcode /sappao/mc62.
I have tried SHD0 - transaction variant. This field is not shown.
Is any other way to realize this?
Thanks,
Bin

Hi,
It is not possible to make the indicator "check bw master date"  mandatory  as this is generated program.
To meet your requirement using BADI /SAPAPO/SDP_MASTER method SET_COMBI_VALUE_CHECK you can force the
system to check 'BW master data' or if this flag is not set then throw the error message.
Regards,
Sunitha

Similar Messages

  • Checking the master data automatically before the payroll run...

    Hi Friends,
    Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
    If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
    So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
    With regards,
    Diptendu

    have
    a look at this report
    but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
    se 38   HTWLINFO  read the documentation of the is report mmight be useful

  • "Check BW Master Data" in MC62 issue

    Hello,
    I am creating CVCs from an Info provider.  I am selecting the "Check BW master data" when i create CVCs immediately.
    When i intentionally put wrong values in characteristics which are not in RSA1 (Info object-->Maintain Master data) i am unable to create the CVC when i create a single CVC.
    But when i create CVC immediately from Cube (The cube is uploaded from a data source through flat file) with values in flat files which are not in RSA1 (Info object-->Maintain Master data) , the system is not complaining that there is no master data. It is creating CVC for what ever values i have in Flat files. Is this normal or is the system supposed to error out just like it did when i create a Single CVC?
    Any idea how i can tackle this. Appreciate your help in advance.
    Thanks.
    Sai.

    Hi Sai,
    I can share what I understand.
    CVC is not BW data, it's part of APO DP master data and has connections to BW in the sense that you use the characteristics which are defined in BW.
    When you are creating CVC and checking for BW master data, you are checking if characteristic data is correct BW wise also.
    If the master data for characteristic is not found, BW is issuing an error.
    On the other hand, data in Cube is already a BW data, and all the BW related checks are already done at the time when your data has come from flat file to the Cube. So, there is no chance that you would get BW check related error when you create CVC from cube.
    Hope this helps.
    Thanks - Pawan

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

  • Check what master data was carried with last load

    Hello all,
    I have an issue. I'm looking for a solution, so maybe you can help me :).
    I have the InfoObject A linked to InfoObject B , through a transformation.
    I also have a DTP.
    Running the DTP , I load master data from A to B.
    A and B already contained data, before my load.
    How can I check what master data was carried with my last load?
    (I don't have the chance to check by request, as if in the case of a cube , for example)
    Thank you.

    I agree like cube we cannot see the request wise data wise data .
    The alternate to this is you are updating the data through the DTP correct .
    Goto DTP maintenanve screen and click on the PSA and check the date wise data in that .
    I hope you must be awared of  which date data you need to see . So you can check from the DTP PSA screen .
    Assign marks is the best way to appreciate help

  • Checking the Master Data Load

    Hi,
    If my report doesn't work and I have to check the Master data is uploaded properly or no, How do I check that?
    Can you help with the steps?
    Thank you.

    Hi Radha,
    The shortest way to check the Master data of any info object is:
    Goto SE16 or SE11:
    In the table text box give: /BI0 or C/MXXXXXXXXX
    '0' for SAP generated infoobject
    'C' for Customer generated infoobject
    View of MstrDtaTbls: 'M'
    Master data tab: 'P'
    SID table attr.: 'X'
    Text Table: 'T'
    XXXXXXX - infoobject.
    Hopes this helps.
    Regards,
    Ravi Kanth

  • How to lock R/3 master data transatcions when using Central MDM Scenario?

    Hello Colleagues.
    We are implementing a Central master data management scenario, all master data will be created / changed within MDM; so we need to block create/change for fields that are considered in MDM for the master records within R/3.
    In a previous project we used authorization profiles to achieve this task. I supose an other option is to use the field status configuration.
    However, I was wondering if SAP has something standard to achieve this blocking within R/3?
    Thank you for your answers.
    Regards,
    Jorge.

    Hi Jorge,
    SAP MDM has released Central Master Data management as standard already.  Also SAP MDM SP04 has more features which will have easy integratoin for standard R/3 Repositories for CRM, SRM etc.  You have a facility in MDM Repository for creating your customized Roles which will help you to block certain access to users.
    Hope this answers your requirement.
    Regards
    Veera
    Note : Please mark the Points if this reply is helpful to you

  • Profit Center Mandatory when creating Cost Center

    Hi,
    How do we make Profit Center Mandatory when creating Cost Center, I remember doing this and cannot recollect as to how i did this in a previous version 4.0b.
    Pls advise how to do the same in ECC 5.0 and higher..
    Thanks,
    Praveen

    Dear Praveen ,
    First u will creat PCA then u will acitvit .
    while creating cost center u have to give profit cnenter accounting .
    ur not enter pca aacoutno then it will give the error message account is activted but profit cneter account not given
    Regards
    Suresh

  • Can you put line break in text in the data box when creating a chart.  i.e. if you have a bar chart

    Can you put line break in text in the data box when creating a chart.
    i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
    Thanks

    http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
    See "Enter labels"

  • Which BW variable is used for date(range) when creating a portal service

    Hi,
    Can any one please let me know which BW variable is to be used for date(range) when creating a portal service for searching based on dates.
    Thanks
    Abhai

    Hi Arun,
    its just a portal service which would be called when  searching a document created on a particular date or betwwen a range of date.so what i require is which BW variable to be used when handling range.As for variable technical name we use VAR_NAME_I  and for single value variable we VAR_VALUE_EXT_I
    in the similar manner i want BW variable to be used for range of values.
    Thanks
    Abhai

  • Error when generating program when creating CVC using infoprovider

    We are receiving the message "Error when generating program" when
    creating CVC using infoprovider.
    This may have something to do with the fact that we added an attribute
    to the infoObject 9ALOCNO. We are getting an information message if we
    run a consistency check in the POS.
    We had this same issue in our development system. Here, I deactivated
    and then reactivated the CVCs and this resolved the problem. However,
    this is not a good solution since this is also a problem in our
    production system and we do not want to deactivate the POS.
    is there another option to fix this problem?
    Thank you,
    Rumi

    Hi Rumi,
    i would try these:
    1. Make sure the cube is active and every thing ok there
    2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
    3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.

  • Master data error - when switching an attribute to navigable

    Hi,
    I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
    Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
    Error in activating the InfoObjects
    Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
    Error in BW:
    Error when activating InfoObject 0FS_CTR_NO
    Characteristic 0FS_CTR_NO: Error when generating master data routines
    Error when resetting InfoObject 0FS_CTR_NO to the active version
    I tried to make this modification also directly in Quality without transport, and the error is the same.
    Master data is empty, so I cannot understand why there is a problem with SIDS.
    Any suggestions?
    Thanks,
    Gianluca

    Hi,
    as Raj said,  when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
    check this thread.
    Link: [Error when activating 0MATERIAL after adding Navigation attribute]
    Regards
    Daya Sagar

  • Check on Master Data Value (User Manual Input)

    Hi all,
    i have the following situation:
    User has to insert a set of Characteristic Value (these are not limited in level for any value nor variable) to be able to enter layout and does manual planning, with my great astonishment i have noticed that BPS does not do any check on the master data value inserted by the user, for example if user insert value '1' for 0payscalety CH instead of '01' the system does not give any error message and goes directly to perforate the Master Data with this wrong value.
    Does exist any setting/tip to avoid this unpleasant situation?
    Many thanks in advance
    Fabio

    Hello Fabio,
    personal I would not set up a data model, which makes differences between 01 and 1. It is known that this will make always problems in the future.
    I believe it is quite more unpleasant that SAP does not provide detailed documentation...
    You can use e. g.
    - conversion routine in BW char.
    - message, fox
    - char. rel. and / or ABAP
    - drop down list which does not allow manual input
    to manipulate before / after input. These are some of those possibilities, which SAP provides.
    regards
    Eckhard
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • 0HRPOSITION master data issue when position is delimited

    We are live with BW HR application and having issue with 0HRPOSITION master data. We are extracting data from SAP using 0HRPOSITION_ATTR datasource. I noticed that data is not maintained correctly in master data tables in BW and giving us incorrect results in reporting. Consider below mentioned scenario:
    Position A created as vacant on 05/01/2008 with start date (BEGDA/ Valid from) as 05/01/2008 and End date (ENDDA/ Valid to) as 12/31/9999 and is vacant. Below mentioned entry is shown under maintain master data for 0HRPOSITION in BW:
    Position Valid To Valid From Position Vacant
    A 04/30/2008 01/01/1000
    A 12/31/9999 05/01/2008 X
    Position A is now delimited on 09/15/2009 as its no more required. In SAP, position has record only from 04/01/2006 till 09/20/2009 as vacant. When record is extracted in BW, it creates below mentioned entry in master data table.
    Position           Valid To     Valid From     Position Vacant Indicator
        A             04/34/2008    01/01/1000
        A             09/20/2009    05/01/2008                  X
        A             12/31/9999    09/21/2009                  X
    Entry 09/21/2009 - 12/31/9999 is incorrect as position does not exist for this duration and it is neither vacant nor occupied. If we report on 0HRPOSTION with key date as 09/30/2009 , it shows position A as vacant though position no longer exists.
    Has anyone come across this situation. any help is greatly appreciated.
    Thanks & Regards,
    Prithi Iyengar
    Edited by: Prithi Iyengar on Dec 23, 2009 3:07 PM

    Hi,
    We do a full update data load for 0HRPOSITION attribute as well as text on daily basis. Attribute change run are scheduled in the process chains. No issues with that..
    In the report, we have the display option of 0HRPOSITION as key and text. Now what is happening is that for most of the positions the text is displayed perfectly but only for those positions which were delimited the text description is not displayed in the report. It is displayed as blank. For eg consider positions A, B, C and D. Say A, B are active positions and C & D have been delimited at a cerain period of time.
    *Master data table is:*
    Position --  Valid_from --  Valid_to  -- Description -- Org. Unit
    A         --  01.05.2008 -- 31.12.9999-- Text1   --- A001
    B         --  01.06.2009 -- 31.12.9999 -- Text2   --- B001
    C         --  01.06.2009 -- 01.08.2009 --- Text3 --- C001
    C         --  02.08.2009 -- 31.12.9999 --  ........   --- ....
    D         --  01.07.2008 -- 15.06.2009 -- Text 4  ---  D001
    D         --  16.06.2009 -- 31.12.9999 --  ........  --- ...
    In report, say i run for date 01.05.2009 to 31.05.2009,
    Position -
    No. of positions
    Key -
    Text  
    A     |  --- Text1  | 1
    B     |  --- Text 2 | 1
    C     |  --- .......... | 1
    D     |  --- .......... |1
    If you notice, the description is maintained for positions C & D in time period 01.05 to 31.05 but the text is not displayed in the report.
    Thanks,
    Edited by: Prithi Iyengar on Dec 23, 2009 5:30 PM

Maybe you are looking for