Makepkg fatal error: dbus/dbus.h: No such file or directory
Hello everyone.
I downloaded lxappearance2-git from AUR and I tried to makepkg but got the following error at the end of the making procedure:
lxappearance.c:37:23: fatal error: dbus/dbus.h: No such file or directory
I inspected the generated makefiles and none of them has an include path for gcc to /usr/include/dbus-1.0/dbus.
Maybe this is the problem? Or what else.
Thanks
Oh yea I had two lxappearnce packages to be downloaded i was looking at the wrong one because the dependancy of the one is the other. My bad, gonna check the comments now.
Sorry about crossposting wasn't sure about the nature of the question, its not gonna happen again. Feel free to delete the newbie one I guess
Edit: Hmm to my understanding this is an issue to be solved. Since I know where the dbus library is located, isn't there a way to tell the build where it is? I went through some files like "configure" but there are a little bit complicated for me
Last edited by Crone (2012-03-29 23:23:08)
Similar Messages
-
Ok, I'm stuck. I'm trying to compile libarchive-1.3.1 ona a system and I get this error. I've tried this and that, but no luck ... anything obvious I need to install? Think there may be a broken symlink somewhere perhaps?
h-3.2# make
make all-am
make[1]: Entering directory `/media/cf/depends/libarchive-1.3.1'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -I./libarchive -g -O2 -MT tar/bsdtar-write.o -MD -MP -MF "tar/.deps/bsdtar-write.Tpo" -c -o tar/bsdtar-write.o `test -f 'tar/write.c' || echo './'`tar/write.c; \
then mv -f "tar/.deps/bsdtar-write.Tpo" "tar/.deps/bsdtar-write.Po"; else rm -f "tar/.deps/bsdtar-write.Tpo"; exit 1; fi
tar/write.c:49:28: error: ext2fs/ext2_fs.h: No such file or directory
tar/write.c: In function 'write_hierarchy':
tar/write.c:599: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
tar/write.c:599: error: (Each undeclared identifier is reported only once
tar/write.c:599: error: for each function it appears in.)
tar/write.c:601: error: 'EXT2_NODUMP_FL' undeclared (first use in this function)
tar/write.c: In function 'write_entry':
tar/write.c:742: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
make[1]: *** [tar/bsdtar-write.o] Error 1
make[1]: Leaving directory `/media/cf/depends/libarchive-1.3.1'
make: *** [all] Error 2I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;) -
Error X11/Xlib.h: No such file or directory
I'm trying to compile some C-code using gcc, and I keep getting the following error: "X11/Xlib.h: No such file or directory". I know that I need to "somehow" identify the Path information for these X11 lib's, etc, but I do not know HOW to do that. I tried adding path definitions to my .profile file - did not work. I have X11 installed, and supposedly I installed the SDK. Can anyone help me with this
If you're not sure if you have the SDKs, can you confirm you have the files under /Developer? Check for /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6/include/X11
I don't remember having to do anything special to get gcc to find these files.
From what I've noted, the usual trigger seems to be that the X11SDK.pkg package wasn't installed.
Typical PATH export is:
export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
If you're working with Fink, there's a call to the following needed:
. /sw/bin/init.sh
See http://finkproject.org/doc/users-guide/install.php
But I'd first make sure the X11 SDK was installed. I'd guess that is missing. -
[SOLVED] Error : sys\stat.h: No such file or directory
I get "...sys\stat.h: No such file or directory" error when compiling a simple C program. i have been searching for a while on web and see people writing "# pacman -S base-devel" i have that already and some more packages like glib ...
These are the includes i am using :
#include <stdio.h>
#include <stdlib.h>
#include <io.h>
#include <fcntl.h>
#include <sys\stat.h>
// here is when i use the libraries sys/stats.h
struct stat stbuf;
stat(argv[2], &stbuf);
int infSize = stbuf.size;
This is the output of the command "gcc -o copy copy.c" :
copy.c:3:16: error: io.h: No such file or directory
copy.c:5:22: error: sys\stat.h: No such file or directory
copy.c: In function 'main':
copy.c:35: error: storage size of 'stbuf' isn't known
Either i am missing any package needed or the gcc compiler is missing any lib directory. But i dont know which one is it.
Any ideas are apreciated. Thanks you
EDIT : The error was actually on #Include <io.h> , but i dunno why it conflicted with #include <sys\stat.h>.
Anyway Problem Solved.
Last edited by puzzled (2008-10-05 17:07:03)If you're not sure if you have the SDKs, can you confirm you have the files under /Developer? Check for /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6/include/X11
I don't remember having to do anything special to get gcc to find these files.
From what I've noted, the usual trigger seems to be that the X11SDK.pkg package wasn't installed.
Typical PATH export is:
export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
If you're working with Fink, there's a call to the following needed:
. /sw/bin/init.sh
See http://finkproject.org/doc/users-guide/install.php
But I'd first make sure the X11 SDK was installed. I'd guess that is missing. -
Here is an install log:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for a BSD-compatible install... /bin/install -c
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... no
checking if /usr/bin/ld accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
conky 1.7.2 configured successfully:
Installing into: /usr
System config dir: /etc
C compiler flags: -Wall -W
Libraries: -lm -lasound -lrt
Linker flags: -Wl,-O1
* X11:
X11 support: no
XDamage support: no
XDBE support: no
Xft support: no
* Music detection:
Audacious: no
BMPx: no
MPD: yes
MOC: yes
XMMS2: no
* General:
OpenMP:
math: yes
hddtemp: no
portmon: no
RSS: no
Curl: no
Weather
METAR: no
XOAP: no
wireless: no
IBM: no
nvidia: no
eve-online: no
config-output: yes
Imlib2: no
ALSA mixer: yes
apcupsd: yes
I/O stats: yes
* Lua (no) bindings:
Cairo: no
Imlib2: no
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make: *** [all-recursive] Error 1
A couple of months ago I stumbled upon this problem, but handfixed all entrances in Makefiles recursively, changing explicitly '/bin/sh' on '/bin/bash' (although, /bin/sh is a link on /bin/bash). Now I had do deploy archlinux on another machine and here's the problem, again.
Last edited by cra (2009-10-27 12:43:53)Ok, I rm'ed the src and pkg subdirectories for package cairo-lcd, here's what I have:
(Actually, no specific options for makepkg)
[cra@cratop 07:47:47 ~/downloads/cairo-lcd]
$ ls
PKGBUILD cairo-1.8.8.tar.gz lcd-filter.patch
[cra@cratop 07:48:46 ~/downloads/cairo-lcd]
$ makepkg
==> Making package: cairo-lcd 1.8.8-1 i686 (Wed Oct 21 07:48:50 MSD 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found cairo-1.8.8.tar.gz in build dir
-> Found lcd-filter.patch in build dir
==> Validating source files with md5sums...
cairo-1.8.8.tar.gz ... Passed
lcd-filter.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f "cairo-1.8.8.tar.gz"
==> Entering fakeroot environment...
==> Starting build()...
patching file doc/public/cairo-sections.txt
Hunk #1 succeeded at 326 (offset 7 lines).
patching file src/cairo-font-options.c
patching file src/cairo-ft-font.c
Hunk #2 succeeded at 742 (offset 3 lines).
Hunk #3 succeeded at 1034 (offset 3 lines).
Hunk #4 succeeded at 1091 (offset 3 lines).
Hunk #5 succeeded at 1103 (offset 3 lines).
Hunk #6 succeeded at 1124 (offset 3 lines).
Hunk #7 succeeded at 1162 (offset 3 lines).
Hunk #8 succeeded at 1225 (offset 3 lines).
Hunk #9 succeeded at 1252 (offset 3 lines).
Hunk #10 succeeded at 1500 (offset 3 lines).
Hunk #11 succeeded at 1542 (offset 3 lines).
Hunk #12 succeeded at 1578 (offset 3 lines).
Hunk #13 succeeded at 1697 (offset 3 lines).
Hunk #14 succeeded at 1726 (offset 3 lines).
Hunk #15 succeeded at 2695 (offset 25 lines).
patching file src/cairo-types-private.h
Hunk #1 succeeded at 116 (offset 8 lines).
patching file src/cairo-xlib-screen.c
Hunk #1 succeeded at 143 with fuzz 1 (offset 11 lines).
Hunk #2 succeeded at 159 (offset 11 lines).
Hunk #3 succeeded at 257 (offset 11 lines).
Hunk #4 succeeded at 287 (offset 11 lines).
patching file src/cairo.h
Hunk #1 succeeded at 1046 (offset 78 lines).
Hunk #2 succeeded at 1171 (offset 78 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for bash... /bin/bash
checking if dolt supports this host... yes, replacing libtool
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether to build gtk-doc documentation... no
checking for gtkdoc-check... no
checking for find... /usr/bin/find
checking for xargs... /usr/bin/xargs
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether gcc and cc understand -c and -o together... yes
checking for inline... inline
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether byte ordering is bigendian... no
checking whether float word ordering is bigendian... no
checking for native atomic primitives... Intel
checking whether atomic ops require a memory barrier... no
checking for native Win32... no
checking for Sun Solaris (non-POSIX ctime_r)... no
checking for cos in -lm... yes
checking for sched_yield in -lrt... yes
checking for stdint.h... (cached) yes
checking for inttypes.h... (cached) yes
checking sys/int_types.h usability... no
checking sys/int_types.h presence... no
checking for sys/int_types.h... no
checking for uint64_t... yes
checking for uint128_t... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for sys/stat.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/poll.h usability... yes
checking sys/poll.h presence... yes
checking for sys/poll.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sched_getaffinity... yes
checking fenv.h usability... yes
checking fenv.h presence... yes
checking for fenv.h... yes
checking for feenableexcept... yes
checking for fedisableexcept... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking for signal.h... (cached) yes
checking setjmp.h usability... yes
checking setjmp.h presence... yes
checking for setjmp.h... yes
checking for vasnprintf... no
checking for link... yes
checking for ctime_r... yes
checking for drand48... yes
checking for flockfile... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking for supported warning flags...
checking whether gcc supports -Wall... yes
checking whether gcc supports -Wextra... yes
checking whether gcc supports -Wsign-compare... yes
checking whether gcc supports -Werror-implicit-function-declaration... yes
checking whether gcc supports -Wpointer-arith... yes
checking whether gcc supports -Wwrite-strings... yes
checking whether gcc supports -Wstrict-prototypes... yes
checking whether gcc supports -Wmissing-prototypes... yes
checking whether gcc supports -Wmissing-declarations... yes
checking whether gcc supports -Wnested-externs... yes
checking whether gcc supports -Wpacked... yes
checking whether gcc supports -Wswitch-enum... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wstrict-aliasing=2... yes
checking whether gcc supports -Winit-self... yes
checking whether gcc supports -Wunsafe-loop-optimizations... yes
checking whether gcc supports -Wdeclaration-after-statement... yes
checking whether gcc supports -Wold-style-definition... yes
checking whether gcc supports -Wno-missing-field-initializers... yes
checking whether gcc supports -Wno-unused-parameter... yes
checking whether gcc supports -Wno-attributes... yes
checking whether gcc supports -Wno-long-long... yes
checking whether gcc supports -Winline... yes
checking whether gcc supports -fno-strict-aliasing... yes
checking whether gcc supports -fno-common... yes
checking whether gcc supports -Wp,-D_FORTIFY_SOURCE=2... yes
checking which warning flags were supported... -Wall -Wextra -Wsign-compare -Werror-implicit-function-declaration -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wpacked -Wswitch-enum -Wmissing-format-attribute -Wstrict-aliasing=2 -Winit-self -Wunsafe-loop-optimizations -Wdeclaration-after-statement -Wold-style-definition -Wno-missing-field-initializers -Wno-unused-parameter -Wno-attributes -Wno-long-long -Winline -fno-strict-aliasing -fno-common -Wp,-D_FORTIFY_SOURCE=2
checking how to enable unused result warnings... __attribute__((__warn_unused_result__))
checking how to allow undefined symbols in shared libraries used by test suite... checking whether gcc supports -Wl,--allow-shlib-undefined... yes
-Wl,--allow-shlib-undefined
checking for VALGRIND... no
no
checking for compress in -lz... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for X... libraries , headers
checking for cairo's Xlib surface backend feature...
checking for xlib... yes
checking whether cairo's Xlib surface backend feature could be enabled... yes
checking for cairo's Xlib Xrender surface backend feature...
checking for xlib_xrender... yes
checking whether cairo's Xlib Xrender surface backend feature could be enabled... yes
checking for cairo's XCB surface backend feature...
checking for xcb... yes
checking whether cairo's XCB surface backend feature could be enabled... yes
checking for cairo's Quartz surface backend feature...
checking ApplicationServices/ApplicationServices.h usability... no
checking ApplicationServices/ApplicationServices.h presence... no
checking for ApplicationServices/ApplicationServices.h... no
checking CoreGraphics/CoreGraphics.h usability... no
checking CoreGraphics/CoreGraphics.h presence... no
checking for CoreGraphics/CoreGraphics.h... no
checking whether cairo's Quartz surface backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Quartz font backend feature...
checking whether cairo's Quartz font backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Microsoft Windows surface backend feature...
checking whether cairo's Microsoft Windows surface backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's Microsoft Windows font backend feature...
checking whether cairo's Microsoft Windows font backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's PNG functions feature...
checking for png... yes
checking whether cairo's PNG functions feature could be enabled... yes
checking for cairo's FreeType font backend feature...
checking for FONTCONFIG... yes
checking for FcFini... yes
checking for FREETYPE... yes
checking whether cairo's FreeType font backend feature could be enabled... yes
checking for FT_Bitmap_Size.y_ppem... yes
checking for FT_GlyphSlot_Embolden... yes
checking for FT_Load_Sfnt_Table... yes
checking for FT_Library_SetLcdFilter... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for cairo's PostScript surface backend feature...
checking whether cairo's PostScript surface backend feature could be enabled... yes
checking for gs... gs
checking for LIBSPECTRE... yes
checking for cairo's PDF surface backend feature...
checking whether cairo's PDF surface backend feature could be enabled... yes
checking for POPPLER... yes
checking for poppler_page_render... yes
checking for cairo's SVG surface backend feature...
checking whether cairo's SVG surface backend feature could be enabled... yes
checking for LIBRSVG... yes
checking for rsvg_pixbuf_from_file... yes
checking for cairo's image surface backend feature...
checking for pixman... yes
checking whether cairo's image surface backend feature could be enabled... yes
checking for cairo's user font backend feature...
checking whether cairo's user font backend feature could be enabled... yes
checking for gtk... yes
configure: creating ./config.status
config.status: creating src/cairo.pc
config.status: creating cairo-uninstalled.pc
config.status: creating src/cairo-xlib.pc
config.status: creating cairo-xlib-uninstalled.pc
config.status: creating src/cairo-xlib-xrender.pc
config.status: creating cairo-xlib-xrender-uninstalled.pc
config.status: creating src/cairo-xcb.pc
config.status: creating cairo-xcb-uninstalled.pc
config.status: creating src/cairo-png.pc
config.status: creating cairo-png-uninstalled.pc
config.status: creating src/cairo-ft.pc
config.status: creating cairo-ft-uninstalled.pc
config.status: creating src/cairo-ps.pc
config.status: creating cairo-ps-uninstalled.pc
config.status: creating src/cairo-pdf.pc
config.status: creating cairo-pdf-uninstalled.pc
config.status: creating src/cairo-svg.pc
config.status: creating cairo-svg-uninstalled.pc
config.status: creating Makefile
config.status: creating boilerplate/Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating test/pdiff/Makefile
config.status: creating perf/Makefile
config.status: creating util/Makefile
config.status: creating doc/Makefile
config.status: creating doc/public/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing ./build/Makefile.win32.features commands
config.status: creating ./build/Makefile.win32.features
config.status: ./build/Makefile.win32.features is unchanged
config.status: executing ./src/Makefile.am.features commands
config.status: creating ./src/Makefile.am.features
config.status: ./src/Makefile.am.features is unchanged
config.status: executing ./src/Makefile.win32.features commands
config.status: creating ./src/Makefile.win32.features
config.status: ./src/Makefile.win32.features is unchanged
config.status: executing ./boilerplate/Makefile.am.features commands
config.status: creating ./boilerplate/Makefile.am.features
config.status: ./boilerplate/Makefile.am.features is unchanged
config.status: executing ./boilerplate/Makefile.win32.features commands
config.status: creating ./boilerplate/Makefile.win32.features
config.status: ./boilerplate/Makefile.win32.features is unchanged
config.status: executing src/cairo-features.h commands
config.status: creating src/cairo-features.h
config.status: executing ./src/cairo-supported-features.h commands
config.status: creating ./src/cairo-supported-features.h
config.status: ./src/cairo-supported-features.h is unchanged
config.status: executing ./build/Makefile.win32.features-h commands
config.status: creating ./build/Makefile.win32.features-h
config.status: ./build/Makefile.win32.features-h is unchanged
cairo (version 1.8.8 [release]) will be compiled with:
The following surface backends:
Image: yes (always builtin)
Xlib: yes
Xlib Xrender: yes
Quartz: no (requires CoreGraphics framework)
Quartz-image: no (disabled, use --enable-quartz-image to enable)
XCB: yes
Win32: no (requires a Win32 platform)
OS2: no (disabled, use --enable-os2 to enable)
PostScript: yes
PDF: yes
SVG: yes
glitz: no (disabled, use --enable-glitz to enable)
BeOS: no (disabled, use --enable-beos to enable)
DirectFB: no (disabled, use --enable-directfb to enable)
The following font backends:
User: yes (always builtin)
FreeType: yes
Win32: no (requires a Win32 platform)
Quartz: no (requires CoreGraphics framework)
The following functions:
PNG functions: yes
And the following internal features:
gcov support: no
test surfaces: no (disabled, use --enable-test-surfaces to enable)
ps testing: yes
pdf testing: yes
svg testing: yes
--- The XCB surface backend feature is still under active development and is
--- included in this release only as a preview. It does NOT fully work yet
--- and incompatible changes may yet be made to XCB surface backend specific
--- API.
make all-recursive
make[1]: Entering directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
[cra@cratop 07:49:13 ~/downloads/cairo-lcd]
$ -
Error creating moint point: No such file or directory
I get this message in x86-64 version of Arch. Even uder root so that's not a problem with user settings. Is there something I forgot to install or set?
I have gvfs, thunar-volman. .xinitrc is as follows:
export GTK2_RC_FILES="$HOME/.gtkrc-2.0"
export DE=xfce
exec ck-launch-session dbus-launch --exit-with-session startxfce4Hi
I get this message when i connect my ext hard or flash memory.why? please help me
Here are fdisk:
Disk /dev/sda: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x99901768
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 143362047 71577600 7 HPFS/NTFS/exFAT
/dev/sda3 143362048 182432127 19535040 83 Linux
/dev/sda4 182432128 976773167 397170520 5 Extended
/dev/sda5 182432191 190239717 3903763+ 82 Linux swap / Solaris
/dev/sda6 190239781 976773167 393266693+ 83 Linux
Disk /dev/sdd: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x62e315ca
Device Boot Start End Blocks Id System
/dev/sdd1 63 976768064 488384001 c W95 FAT32 (LBA)
Last edited by proserpine (2013-05-21 08:26:15) -
RDBMS Version: 8.1.7.4
Operating System and Version: trusted solaris intel 8
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): installation of patch set 8.1.7.4
Product Version: 8.1.7.4
ld.so.1: oracle<sid>: fatal: libjox8.so: open failed: No such file or directory
I get this error when connecting to with SQLPLUS to Oracle.
I have reordered paths in LD_LIBRARY_PATH
so $ORACLE_HOME/lib is before /usr/lib
and recompiled make -f ins_rdbms.mk install
and make -f ins_rdbms.mk ioracle
I can only connect as oracle in the install group
I have found some posts the suggest changing mode of the oracle executable. but that doesn't seem to help.
I have tried to $ORACLE_HOME/bin/relink all
but that didn't help either.
Please advise.According to the following docs, you should not get this error when you apply Patch 8904424 so I would suggest you log a SR.
Patch 8557019: make: Fatal error: Command failed for target `dejvm'0.1.2/lib32/WS6U1/crti.o: open failed: No such file or directory (Doc ID 1291895.1)
make: *** [dejvm] Error 1 While Applying 8557019 For Forms Upgrade Doc 437878.1 (Doc ID 1543498.1)
Thanks,
Hussein -
Disk Utility error: "No such file or directory."
I'm trying to copy a DVD I made in iDVD. What I've always done in the past is to open Disk Utility, put the DVD in the optical drive, select "Images...New...Image From [optical drive]". But today when I do this I get an error message that says "No such file or directory."
I've tried selecting the drive ("2.0 GB PIONEER DVD-R...") and selecting the DVD ("CFTPRODUCTDEMO").
The DVD plays in DVD Player no problems. I have 11 GB free on my hard drive. I'm using a new Pioneer DVR-111D external optical drive (the internal 106D won't read DVDs it makes).
What's wrong?Hey,
Im having the same exact problem.
Toast even says it has a medium error with this drive.
I cant burn with toast and it wont play other DVD-R movies
that I have burnt on other systems.
What is the fix? -
Error when compiling: "asm/errno.h: No such file or directory"
Ok, so I've got this error while compiling some app written in C:
In file included from /usr/include/bits/errno.h:25,
from /usr/include/errno.h:36,
from /usr/include/python2.6/Python.h:40,
from config.c:18:
/usr/include/linux/errno.h:4:23: error: asm/errno.h: No such file or directory
make: *** [config.o] Error 1
I've tried to google it, people said I needed to make some symlinks, but it didn't work. I've also tried update (pacman -Syu), but that didn't help as well. Do you have any solutions?
ThanksThanks,
I was searching for a soltion like GCC Path and something with include or something but this worked instead..:) -
Xmlparser.parse error: No such file or directory
Hello,
Please forgive me if this has already been answered, but I did quite a bit of searching and could not find any resolved threads on this matter.
I'm getting the following error from my call to xmlparser.parse(parser, Path || File);
ERROR at line 1:
ORA-20100: Error occurred while parsing: No such file or directory
ORA-06512: at "SYS.XMLPARSER", line 22
ORA-06512: at "SYS.XMLPARSER", line 79
ORA-06512: at "MyProcedure", line 219
ORA-06512: at line 1
Now, I've seen that sometimes this can be caused because of a missing dtd, so I've set the following:
xmlparser.setValidationMode(parser, FALSE);
Moreover, I can access the same file with a call to:
utl_file.fopen(Path, File, 'r');
What can I begin to do to try and solve this?
Thanks,
RyanOh - I think this is the problem:
http://www.lc.leidenuniv.nl/awcourse/oracle/appdev.920/a96621/adx20ppl.htm#1005695
Argument Description: 'dir'
"should be specified as a complete path name" - I was using a directory alias -
[SOLVED] /usr/bin/env: No such file or directory
Hi,
I've tried to install a couple packages from the AUR, but when I run "makepkg -s", I get this error:
/usr/bin/env: No such file or directory
make: *** [install] Error 127
==> ERROR: A failure occurred in package().
Aborting...
I'm sorry if this is something terribly simple, but I can't find any mention of /usr/bin/env anywhere.
I have coreutils installed, which I believe env is part of.
Thank you for any help!
Last edited by dluco (2013-09-24 01:37:11)The /usr/bin/env is provided by the coreutils package.
You didn't run into issues when there was the move from /bin, /sbin, /usr/sbin → /usr/bin ? This happened back in the beginning of June! You need to read the front page news.
If this is the case, I am venturing to guess that your system is probably not actually up to date, and even that you might have been doing partial updates for some time now…
Edit: Check /bin, /sbin, and /usr/sbin and see if they are symlinks pointing to /usr/bin. If they are, you apparently made it through that update unscathed. If they are not, well…
Last edited by WonderWoofy (2013-09-23 16:25:19) -
Hi,
I have a <af:inputFile> component which will upload only image file and render the corresponding image...
It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
And in BPM whenever i upload PNG file it throws this error.
Please help.For some files like Images with .png extensions it gives following error :
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1705)
at java.io.File.createTempFile0(File.java:1726)
at java.io.File.createTempFile(File.java:1803)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) -
Compile fail under linux ! oci.h: No such file or directory
I want to transplant an Win32 OCI program to Linux.When i compile the program under Linux, the gcc returns the error information 'oci.h: No such file or directory '.
Where can i find the OCI libs and includes under Linux/Unix?and I suggest you should use $ORACLE_HOME/rdbms/demo/demo_rdbms.mk to build oci applications. Instructions are there in the same file.
-
Operating system message: No such file or directory in DMS while archivng.
Dear Team,
While i am trying to make the archiving i am getting the error "
Operating system message: No such file or directory" in DMS. I cross checked all the forums and made the settings as suggested still i am not able to resolve this. In fact it is working fine in my development system but not executing in Quality server.
Please do the needful.
Regards,
BanuHi Bhanu,
Check with technical details like archive directory ,customising settings on sara . I think so u made transport archive setting TR into quality server ?. On some repository the changes won't happen with imported TR on target system. Please cross check and do manually on quality server. My guess problem with OAC0 , OACT .
Regards,
chandu -
Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb"
Maybe you are looking for
-
Duplicate software componentn in Integration Repository
Hi Experts, I have a scenario here in which I was trying to move my objects in Integration Repository from dev to prod by simply exporting it. I have done exporting all objects by choosing " All objects of Individual Namespaces ". Now, my problem is
-
How to remove the "Sign Out" in OBIEE 11g?
How to remove or hide the "Sign Out" option from Dashboard in OBIEE 11g? Edited by: Siva Prasad on Jul 6, 2011 6:20 AM
-
CS4 install- win32version.rc missing in CS4 AE SDK zip file
Hello, Copied down the CS4 AE SDK to Windows, and everything looks fine except CCU project is missing a "win32version.rc" file. Linker errors are telling me its missing About(), DoClickRect(), and DoClick() functions. Figured maybe I'd install CS3 an
-
Recomendations on how to deploy Adobe updates in a corporate enviroment
I am sure this has been asked but I couldn't find anything We have many computers on a corporate network that are running Adobe Acrobat (6, 7, 8, & 9). I am looking for an effective way to update all of my adobe versions with the latest patches on a
-
COR1/2/3 process header screen exit
Hi, The task is to add an additional tab strip with additional data in process order header - COR1, COR2, COR3 Is there a way to do that without modifying standard screen? Some screen exits? I wasnt able to find any regards, Jurijs