Making a DVD from FCP X project

A few projects ago, I could render a movie for DVD from FCP X onto a DVD to burn. Then, it would be working for hours and hours and never finish.. a day later, it wasn't finished. Can't make one since.
What could be the problem? I s some part of the process too big for my hardware or software? Can I change something to allow it to work again?
Any ideas? Perhaps something is set wrong?
Thank you for any suggestions.

What version are you running?
Do you get a Publishing Error -29?
Russ

Similar Messages

Making master DVD from FCP Quicktime

Could someone please explain to me exactly what process, every step, I have to do to with my master FCP Quicktime movies in order to make a DVD master using iDVD? Its 4.8GB plus a second film of 2.4GB. Much appreciated!!!

Terry
You can start here:
http://www.apple.com/ilife/tutorials/#idvd
but, what do you mean with DVD master?
Besides that, the key factor is not the file size of your source movie but the total lenght in minutes. Why don't you uses DVDSP?
Hope that helps !
Alberto

Making a DVD from

I am making a DVD from final cut pro, it is about 1 hour 50 minutes. I am using idvd are there any suggestions on how or/if to compress this to make it fit on idvd. I thought I would try posting here first instead of the idvd board.
thanks!

iDVD has a limited number of (commonly used) file formats it can deal with, and uses its own DVD video encoder to format and build the DVD. The iDVD help system describes the kinds of files it can accept.
You would use Compressor to encode the separate video and Dolby surround audio files for DVD Studio Pro projects, and iDVD does not accept those file types. If you need more control over your encoding, you should use FCP and Compressor with DVDSP.
The iDVD forums will have more on that topic.
That being said, I love using iDVD because of it's ease and simplicity. I use it to make quick DVDs of my Final Cut Pro projects. Just feed iDVD the right files and it works beautifully.
Cheers

Publishing to DVD from FCP instead of printing to Tape

How would I be able to put my finished timeline to a DVD from FCP rather than print to tape? as I am new to FCP?

Export > Quicktime Movie (using sequence settings)
Open iDVD
Import > Video (locate your QT file)
Burn

Making a DVD from iPhone Video

Lifelong Windows user here seeking some Mac expertise:)
I am in the process of making a DVD from Iphone home videos that can be played on any DVD player.
I see that Mac's video format is .mov which from what I can tell is not the same format needed to make DVD's that can be played on all DVD players. I already have the files saved on my MacBook Pro as mov. files can anyone tell me how to get them converted in order to have them play on a DVD player? Can iMovie do the conversion for you or do I need another program to convert the files and then process them into a movie in the iMovie program or even Adobe Premiere Elements 12 which I also have installed on this MacBook Pro.
Any help would be greatly appreciated.

That is great information to have. Thank You for your quick response. Following your response I did some more research on video converters and found that Handbrake which I already have installed on the MacBook converts video files but only in the output formats of MP4 and MKV which does not help my cause; however, while doing that research I came across a program known as iMedia Converter Deluxe for Mac from Skysoft which from what I can tell supports output .avi video formats. Do you have any experience / advice on iMedia or any other recommended video converter program that works well with Mac and is preferably "free"?

How to make a self-playing DVD from FCP project of 75 minute film.

A Quicktime film has been made in Final Cut. It is about an hour and 15 minutes long. It needs to end up on a self-playing DVD.
Maybe this is a question for the FCP boards (or for DVD SP, which I don't know well): What's the approach to get this project to DVD?---having it look best on the DVD. Are there compression best practices?

Or you may be able to make a Kiosk mode DVD from a QT file / folder using iDVD. (btw ...I've done this successfully thru iDVD6 but I have not yet tried it under iDVD08):
http://discussions.apple.com/thread.jspa?messageID=4764361&#4764361
Please note that this approach is the only way I know of to make a DVD (w/in iDVD) that plays by itself and with no menu whatsoever. Hence the DVD will always play in a continuous loop until you press stop or eject on the remote. Or if you prefer you can also use Roxio Toast which has a similar feature.

Making the best quality DVD from FCP

Can anyone suggest how to make the highest quality DVD from an HDV FCP project?

It's a fun website that I've seen people use recently : http://lmgtfy.com/
It basically generates a url that you can post onto forums etc, and when you click on it, it takes you to the 'mock' google page, followed by the results. It's a polite but fun way of saying "Don't be so lazy, and do a search!". No offense intended to the OP.
The Bruce image is one i had uploaded to Tinypic.com ages ago.
Glad you like it!

Problems encoding a DVD from FCP project

I'm trying to create a DVD from a short 3min project I just cut in FCP 6. It is an HD project and when I do a straight QT export the file is about 1.2 gigs and looks great. However, when I try to use compressor to make an MPEG, it may come out looking fine on my computer, but when I burn the DVD it looks blockly and pixelated. I assumed I'd lose some quality going from HD to SD, but this isn't looking right. Even simple the white text supers come out looking bad. Any help would be greatly appreciated.
iMAC Mac OS X (10.4.10)

Judge the quality on a TV, not your Mac's display...
Use the high quality 90 minute preset for MPEG (DVD) production, but change the motion estimation to Better from Best... try that seems to me it looks better.
Jerry

Why is Color Washed Out after making DVD from FCP

I took a 3 minute corporate video from FCP (shot SD, NTSC DV) and compressed from the timeline in Compressor (3.01) to DVD best 90 minutes. When I burned the DVD in DVDSP (4.2) and played it in a stand alone DVD player with a JVC production monitor it looked washed out. It looks nothing like it does in FCP or DVDSP.
Any idea what is going on?

Yes to the monitor. I shot the video with a Panasonic HVX200 to P2 cards, downloaded and color corrected on Color. Viewed on two production monitors: A JVC CRT and a new Panasonic 26" LCD (LH2600W) production monitor which is fed from a Kona Card via SDI. My Apple 30" monitor, which I edit on is color calibrated with a Spyder calibrator.
I have played the DVD on the 30" and it looks washed out, even after comparing it to a QT movie from the timeline and played on the 30". Something seems to be happening when the DVD is burnt. The mpeg2 file when played in the inspector in Compression looks good too.
This is weird, since I have never had this problem before, but this is the first use of the new Compression.

Suggestions on making a DVD from AVCHD?

What would be the best way to get the best quality DVD from original Sony 1900x1080i AVCHD - M2ts files?
Is it better to:-
Convert (or import) the initial files to AVI with another program and make the project with the AVI files in PE9 and share to DVD using PE9 (what other program?)
or
Edit the original AVCHD files PE9 then
         Share to DVD from the edited AVCHD using only PE9
         or
         Share to a HD format file and use another program to reduce and burn the DVD (what other format and program)
         or
         Share to some other format file and burn the DVD with another program (what other format and program?)
         or
         Share to SD and use another program to burn the DVD (what other program?)
or some other better alternative?
I would be interested in hearing others experiences or nasties they might have encountered doing this.
I supppose it gets down to what does the best job of downsizing the original HD.
Some (but not all) of the copies of the DVD may be played on good quality Blue Ray players that upscale to full HD so I want the best possible DVD.
Also it's my grandaughters wedding so I HAVE to make it good! It is likely to be played many years in the future on probably super players on wall sized screens when unfortunately I won't be around to see them!.
In case you think I'm mad, I will also be making Blue Ray copies as well so I will have to use a second option anyway but I would be prepared to make the project again in low def if this would be better.

I am not worried about speed or ease of editing or work flow but rather ending up with the highest picture quality DVD with minimum artifacts and compression.
Are you sayng I will get better video quality using PE9 to pre-convert the HD to SD before editing, then burning the DVD from that as opposed to making the edit in original AVCHD and converting the final edited HD to SD and then burning the DVD?
I also wondered if another program that specialised in converting would be better to use rather than using PE9 which is primarily an editing program.
As an example PE9 does a bad job of resizing any AVCHD. Just a slight increase in size noticably degrades the resolution.

Best Output for DVD from FCP???

I'm a newbie and need help. I was outputting from FCP 6.0.4 using Export > QuickTime Movie, then importing that file into DVD Studio Pro. But, a college student who saw it recommended Exporting using Compressor 3.0.3 which I did using the DVD: Best Quality 90 Minutes. I noticed an improvement in my DVD quality, however, in every program I've tried and retried so far I get a little short segment (about a 10 second portion) in my half hour long program that all of the sudden goes crazy with distortion and pixelization and image irratic jumping movements. What can I do to create a totally smooth video when going from FCP to Compressor or is there a better way to finally get it into DVD Studio Pro? I want the highest quality solution as the video footage is originally HD. Thanks for your help, Desperate Russ

coyotegyrl333 wrote:
For some reason, I've always found this to work:
render your project and make sure you have only one
video track in the timeline. Drag existing sequences into
a new one so that you accomplish this. Render.
Restart the computer.
Export using compressor.
Maybe this is mumbo-jumbo, but it works every time for me.
good luck to you.
The advice is more or less sound but you have several unnecessary steps. Your idea is to consolidate all of the FCP timelines and their associated media into a single timeline; you are nesting the project.
Forcing everything to render is good.
Export the entire project as a self contained movie.
Import the self contained movie into DVDSP.
You would perform these steps with each of the individual movie clips you want to have as menu items in your DVD project. Maybe. You might be able to use one single large movie and set go-tos for each chapter. Whatever.
But there is no reason to restart your computer.
And there may be no good reason to use Compressor to create the MPEG2 files.
bogiesan

Making a DVD with 3 iMovie projects

I am fairly new at making a DVD. I have iMovie 9.0.4 and am on a Mac OS X version 10.6.8.
My question is: I would like to make a DVD with 3 chapters.
     Chapter #1 would be an iMovie project (13 minutes)
     Chapter #2 would be an iMovie project ( 8 minutes)
     Chapter #3 would be an iMovie project (14 minutes)
I have all three of the movie projects completed.
At this time they are all seperate projects in iMovie.
They are the only projects that I have in imovie.
I hope to combine all three projects on one DVD and provide the DVD to classmates for a 50 year reunion.
Thanks in advance for any help you can provide.

Good or bad info. To be honest - I never use the SlideShow way - but it's well described in this forum and I tested it to be sure that it works. Problem I came up on was
• Black framing - One must select to not scale photos in SlideShow
• Bad sound - as I had to high level it resulted in severe distortion - Lowering it helped
So the problems can be handled - but in reality I rather do
• One movie containing all parts and Chapter Marks set to match. This too has a built in problem as one can not set Chapter Marks in transitions or within 2 sec from them (OR IN VERY BEGINNING OF MOVIE). But there is a way around this too.
• Export the combined movie as Full Quality QuickTime .mov
• Import this QT.mov and now You can set the Chapter Marks (except at very beginning = no need to do this - iDVD does this by it self)
And then I add each Chapter as a free movie too
This works greatly - BUT the Con in this case is that it takes x2 space on DVD. For material less than 60 min this is no problem - but for longer movies one has to be even more elaborate to fix it.
Good Luck !
Yours Bengt W

Making Playable DVD From Disc Image

A friend of mine has an iDVD project but his mac cannot burn dvds. So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn. It does not play as a dvd in a player or in frontrow on my mac. When I double click on it the disc image is on the dvd. Did I make a data dvd instead? How do I make a playable dvd from a disc image?
Also, is going the disc image route the easiest way to transfer an iMovie or iDVD project to another mac. I did it this way because my mac does not have some of the music or photos on it that are linked to the project file. In Garage Band you can save as archive when transferring a file to another mac and it saves all the loops, etc in the file. There must be something similar in iDVD.
Thanks in advance for any help.
Paul

So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn.
Paul,
Video DVDs are written in the UDF format. That's why you must use Apple's Disk Utility to burn a disk image to writable media correctly.
In burning from the Finder, you have created a data DVD in Mac OS Extended format that will NOT play in set-top DVD players (as you have found out).
F Shippey

Making a DVD from Keynote

This should be a simple process, but I can't find out how to do it. (I get it to work after hours of trial and error, usually, but this time I'm stuck)
I make a Keynote show - beautiful photos, text, etc - but without the music since I've been told the best way to add the sound is to make a movie first and THEN use that to make the DVD.
I exported the Keynote presentation to Quicktime (iMovie wouldn't take the actual Keytime presentation), and then moved that to iMovie. But it won't let me move the clip below to actually make a movie and add sound.
And I tried moving the Quicktime presentation (of course no sound in this version, but the original has sound) directly to iDVD. It appears on the Media/Movie page but I can't figure where to go from there. Nothing happens.
Sigh. Any help would be appreciate.

This actually is an addendum to my own email since somehow half the message got dropped. Sorry.
Basically I've created a Keynote presentation (lovely photos, text, etc) with the intent of making a DVD to share with my mother who is bedridden.
(In the "olden days" I would just make a slide show in iPhoto, add sound, and burn. But I love whaat Keynote can do, it's just figuring out how to get THAT presentation to a DVD I can play in a regular DVD player.
I didn't include sound on the version I exported to Quicktime since I was told that the best way to make the DVD was to make a Movie first so I could better adjust the sound. So I exported the soundless one to Quicktime and then moved that to iMovie, but couldn't get it to let me move the clip below.
I also tried moving the Quicktime version directly to iDVD. It is there on the Media/Movie page, but I can't get anything to happen after that. (I could easily use the version of my Keynote presentation with sound, if it would let me,, but I understand there is a problem with that too....)
Again, any suggestions would be helpful.

Burned DVD from FCP on my iMac. Disk won't play on TV!

Anyone help with DVD not working in TV? This is my resume from FCP. May have exported to quicktime movie, then burned. Ideas?

Hello,
Try Burn to automatiacclly make it playable on TVs & DVD players...
http://burn-osx.sourceforge.net/Pages/English/home.html

Making a DVD from FCP X project

Similar Messages

Maybe you are looking for