Making a printed BANNER using cont. feed banner PAPER

does anyone have any idea if I can make a banner (8/12 x 36") using continous feed paper in my printer? I have the trial verison of Pages '08 which came with my new iMac. (I am a mac newbie) For years I easily made printed banners (using up to 5 sheets of cont. feed paper) using MS Publisher.
Thanks in advance.

Yes, I have tried Google, and the Apple.com downloads section, but to no avail as yet.
The Canon printer seems terrific and is a step up from an older HP all-in-one machine....however...i miss the easy HP banner printing dialog boxes...(HP sells banner paper that is perforated and made for this purpose as you probably know) and it is just so easy on a PC. I hope to be able to say the same thing about my new Mac soon.
I did try changing the paper size in Pages, FOLLOWING YOUR INSTRUCTIONS TO USE INSPECTOR...but must have done something wrong because I was not able to actually SEE on on my screem (and thus create) an ACTUAL banner for printing.
I will keep trying. Thanks for the suggestions. My banner making days may be on hold for now (others will be more disappointed about this than me!)
MANY thanks.
If anhyone reading is aware of Banner-Creation software for making actual BANNER PRINTS on an inkjet...please share ! Google searches ususally result in software for WEB-banner creation ..something quite different !

Similar Messages

  • Hp8600 use document feeder as paper source

    Print on envelopes is crooked.   Can i use the documemt feeder as a paper source rather than tray1?

    Hi,
    This is not possible, document feeder is only to feed the documents to be scanned/copied and faxed.
    paper source for printing will always be tray 1 or 2.
    you can make sure that the paper guides are adjusted correctly in the paper tray to avoid crooked p[rinting
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • How do I get the printer to use regular (not Colorlok) paper when printing what it considers photos?

    I get emails with attachments of a document that someone has taken a picture of with  their iphone (a bill, a receipt, etc). I finally got the HP software to give me a print option, but when I try to print, the printer gives the error message that you must use colorlok paper. I'm printing a receipt, not a glossy family photo! Is there a setting that can be adjusted?

    Welcome to the HP Community , I saw your post about the message you're seeing to select colorlok paper, and I will surely do my best to help! When you open up the email attachment that you need to print, which program are the attachments opening up in that are not allowing you to select a different paper type? Let me know which program it is, and I will look in to the options. In the meantime, try using another program to print the items from if that's an option to see if that helps! I hope to hear from you! Say thanks for my reply to help you today by clicking the "thumbs up" below!

  • HP LaserJet 400 MFP M425dn does not print 1/4" of the page when using the feeder

    Hello,
    When using the feeder to make a copy I lose about 1/4" of my copy along one side. 
    We copy a lot of full page sheets with little or no margins.
    Any suggestions on how to correct this?
    Thank you

    Most (if not all) commonly available laser printers have 'unprintable margins' on each edge.
    On most LaserJet printers, these margins are about 4 mm (0.167"), although on some devices I believe that smaller unprintable area margins (of about 2 mm) can be selected when printing (although possibly not when copying).
    When printing with PCL5 drivers, there is also the minimum logical page margin to be taken into account - this is about 6 mm (0.24") by default, although the printing options mentioned above (on some models) can reduce this slightly. 
    See also http://h30434.www3.hp.com/t5/Other-Printing-Questions/printable-area-cm6030/m-p/4863083/

  • Make a simple banner using Captivate 4

    I would like to make a simple banner using the animated text
    object in a single slide. How can I keep it playing? There is no
    way for me to disable the Display Time setting like Question slide.
    Pls advise. Thanks.
    Patrick Yip
    Website:
    http://www.chinese-way.com

    Hi Patrick
    I would think you could achieve this easily. Just configure
    your project to loop.
    Click Edit > Preferences > Project node > Start and
    End node. There you will see a drop-down where you choose the
    action when project ends. Choose Loop project.
    Cheers... Rick

  • Trying to use a Rotating Banner Script

    Hi All,
    I know that some of you are very well versed in iWeb '08 so I thought my question could be answered here.
    I would like to use a rotating banner script on each of the pages on my iWeb made website on the .mac server. I'm not sure how to do this. The script will rotate 5 pictures. When you load one of the pages a picture will appear on top of the page. When you reload the page, you'll see a different picture.
    What I need to know in order to accomplish this rotation is: 1) Where do I upload the pictures to be used 2)what will the link to the pictures be that I need to insert into the script and 3) How do I get the script onto my webpage?
    Thanks in advance for the help

    Hi iwr,
    I used a little application to make some banners because I cannot (or don't want to) learn code and you can see it here
    http://www.mireillegreen.com/Frenchresources/French_ResourcesMain.html
    the site is far from finished so there are many dead links but the banners work. what the app does is upload the banner on my .mac then I paste the code in the snippet. and the snippet looks for the banner. So if I guess right the important is that you place the banner where you tell your page to look for it regardless of where you place it. If you want to try this app (it's free to try) you can find it here, then you can see how it handles the upload.
    http://www.aquafadas.com/bannerzest/
    Good luck
    Mireille

  • I have an MX 510 printer. I want to scan multiple pages. Cannot use doc feed as scanning booklet.

    I have an MX 510 printer. I want to scan multiple pages. Cannot use doc feed as scanning booklet. How do I do this?

    use the MP Navigator application
    When it opens choose PDF and then select Multiple Pages.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Is anyone making good prints using Photoshop and 10.6.4?

    If you are making good photo quality prints, can you reply with your printer model and your Photoshop version? I'm especially interested in info on making good prints with an Epson printer, which I will be replacing if I can't resolve this.
    Thanks!
    Cindy
    <Edited by Host>

    I get beautiful prints from Photoshop, Illustrator, and InDesign on my ancient Canon i9900. I wouldn't own another brand of printer. I've never had a paper jam, never had a clogged print head, and never had a bad cartridge.

  • HP LaserJet 600 M601 doesn't want to use envelope feeder

    1. HP LaserJet 600 M601     
    2. Windows XP 32-bit
    3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print.  Then prints OK.
    4. New printer.
    5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
    Driver is configured with correct trays and printer with paper types.
    User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
    Tray configuration:
    Envelope Feeder:  Envelope #10, Envelope
    Tray 1:  Legal,  Plain
    Tray 2:  Letter, Any Type
    Tray 3:  Letter, Letterhead
    Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
    Firmware:  2131305_192069

    Just got off the phone with HP on the very same issue using a 602dn printer.  What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ).  You'll want the PS driver, not the PCL6 one.  When you exctract it, update your driver to the v5.4 driver.  I don't know why that would have fixed it, but it did.  Let me know if it works for you. 

  • Officejet 6500 Wireless Puts lines on page when using document feeder

    Hi,
    Only using the document feeder for either print or scan there are vertical lines down page sometimes in the middle and sometimes at the end and some horizontal lines as well.
    Scanning or printing direct from the glass - doesn't happen.
    I have to be able to feed more than one page for a fax or scan so its on one document.
    Does anyone know why this is happening when I use document feeder?
    any assistance greatly appreciated

    Hi,
    Plesae click the link for the solution..
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&cc=au&dlc=en&lc=en&product=4083977&tmp...
    Let me know whaty happened...thanks... =)
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Print Report using ASCII command through printer selection available on windows

    Hi,
    I'm using Labview 2009 to create a report using Report Generation Toolkit.
    Creating a report is not the problem, the problem is I need to print the report manually by sending an ASCII Code.
    I noticed that there are few example on send ASCII code command, but neither of them are related to printing.
    The printer I use is Panasonic dot matrix printer KX-P1121E with USB port. (Fanfold type of paper)
    I used "NI_report_lvclass: Print report.vi" from Report Generation before this to print my report, everything is okay and not receiving any error.
    But I noticed that after finish printing, the paper will automatically feed out as if that VI (Print report.vi) is sending out "Form Feed" (FF) Command to the printer. 
    My application cannot use this method because I need to print a set of data in every minute. If the data only have 2 rows, then it will be a wasting a lot of paper if everytime finished printing paper feeding out. I want the printer to continue standby on the same paper after finished printing previous data. In other words, maybe just manually send "Line Feed or Carriage Return" to the printer.
    So I have a few things need to be clarified step by step;
    1. How can I send an ASCII Code to my printer? Do you have any example for this? link below is the character of ASCII Codes that can be use :http://webpages.charter.net/dperr/links/esc_p83.ht​m
    2. Can I send a report created by report generation to be printed using this ASCII command method?
    3. If my printer is setup by using windows (Meaning: Available on "Printer and Faxes" list), How can I configure the printer setup in sending the ASCII Code? 
    Really appreciated your reply
    Thanks!

    Hi Zwired1,
    Just to make sure I fully understand the situation - I am assuming since you say you are printing to two different printers that when you are using the Print Report.vi you are using the printer name string to specify which printer you would like to print on. And if the printer that you specify is not functioning it automatically prints on the other printer, is that correct?
    From looking at the code in the Print Report.vi, it looks like if you specify a printer name in the input string, if there is a problem with that printer or if that printer is unavailable, the VI should not print anything, so please let me know if that is not the behavior you are seeing.
    For your question about checking the health of printers, there is a VI in the report gen toolkit called Query Available Printers. You can find it if you open up the Print Report.vi and choose the Standard Report instance, the Query Available Printers.vi is on the block diagram of that VI. It will return the list of available printers and the default printer.
    I hope that helps,

  • HP G85 All in one - Making the printer Wireless preferably with Airprint

    I am running XP on an HP towerand connecting the Printer using  a USB - USB cable.  I would like to make this excellent printer wireless to print from my HP laptop.
    But also to use it to print from my iPad2 without the hassel of emailing  an iPad document to myself to collect it on the Tower and then print. I believe It would be necessary to make the connection Airprint compatible 
    I wondered if anyone had solved this problem. 

    I fully agree with this complaint.  Curiously, I have faced similar problems like him.  Frequently, I have seen the messages like "paper jam ", "Cartridge missing" while there wasn't any paper jam and genuine brand new cartridges were already installed.  My experience is worse than his.  I could hardly use it for more than one week!  What is worse the wireless operation could never be achieved. Now this printer is lying discarded. 
    It really beats all logic that why should one not be able to scan a document (say -- to save the image on the hard disk for possible future use) even if there was so called paper jam or missing cartridge? 
    Also, it is virtually impossible to delete any job once you have clicked the button print.  The printer would keep on retaining the job, making the printing of other jobs impossible,  unless perhaps you uninstall it and then re-install!  Why can't HP find a solution to this problem?
    I join his sentiments that I would refrain from buying any HP product in future.

  • Can't use the feeder of a Officejet 6500a plus

    I just bought a new iMac (os x 10.9) and with the use of the os x 10.8 driver I could install my Officejet 6500A Plus. Now I want to use the feeder to scan some documents and I want to send it to my iMac but the following notification is shown: "you can start a scan from your computer or scan to your computer from the printer. make sure the HP printer software is installed. Windows only - Network connection in the hp printer software, enable the activate scan to computer function."
    Can someone tell me what I'm doing wrong?

    Hello Tim_Aelbrecht,
    Welcome to the HP Support Forums! I see you are using the new Mavericks 10.9 OS with your HP Officejet 6500A Plus, you would like to scan from the front panel, but you are not given the option. With the newer 10.9 OS, there were no full featrue software and drivers made, this is why you are getting the error message. To get a better understanding, continue below.
    Seeing as there are no full feature software and drivers you cannot scan from the printer control panel without a Full Feature driver, you can still scan without the Full Feature HP software installed on your computer by using a basic set of scanning drivers. These drivers enable scanning from Apple Preview or Apple Image Capture. You can also scan from the Print & Scan window. Find out how here: How to Scan: OS X v10.9
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Running a Mac G3, having been using a Laserwriter Select 360, but it and two others are now dead. What is the next best or better printer to use?

    I am running a desktop beige Mac G3 and have been using a Laserwriter Select 360, but it an two others are now dead.
    What is an equal or better printer to use with the Mac?

    Hey, BD, I looked at Brothers last night in connection to this questiona and it looks like their newest/current laser print-only units go back to 10.4 but no further.
    Brother is the best hope but the OP may need to look for an older model still in stock. For example, for our older Brother HL5250DN, they still show OS9 drivers:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?r eg=us&c=us&lang=en&prod=hl5250dn_all
    Gary, web-check for stores that still have older models on teh shelf. You can also look at "newer-but-not-new" and then use the Brother site to check for OS9 drivers.
    Founds some of my model on eBay:
    http://www.ebay.com/sch/i.html?_nkw=Brother+HL-5250DN
    We paid US$199 for ours new about seven years ago. It's been a real workhorse and trouble-free. Well, except for the time my wife tried to feed it a odd paper stock that was not on the printer's official diet!
    A Beige G3 consideration: The Big Beige doesn't come with USB ports. You must add a PCI USB adaptor card, and the ones that worked in the Beige are harder to find today.
    However, the Beige has built-in ethernet so if you get a printer with an ethernet connector, you will be in bisiness with neither the expense of an extra adaptor card nor the occasional buttheadedness of USB printing. The "N" in our Brother model designates it as a network printer so it has an ethernet port. Many others do also.

  • When I try to print a test page The printer feeds the paper through the printer without printing

    My printer is set up and Windows XP Home SP3 recognizes it. I have checked the Device Manager to see if I had any conflicts.
    I didn't so I opened the print spooler and typed Test in Windows Notebook and hit print. It showed up in the print spooler but
    the printer located the edge of the page then fed the paper through.  I uninstalled the printer and Printer driver and also the software. After I rebooted Windows found the printer and let me load the drivers and I printed a test page afterward and it printed fine. But then it went back to just feeding the paper through.
    I have the latest windows installer version 4.5 running. All of Windows updates are up to date. I'm lost can anyone Help me

    '''bold text'''I've tried several different virtual pdf printer applications including:
    Foxit pdf printer
    doPDF v 7
    Nitro PDF driver v5
    NovaPDF
    Simpo PDF Creator
    qvPDF
    Virtual PDF Printer
    I took screenshots of the same small section of a sample pdf file saved to pdf using the virtual pdf printer freeware doPDF v7.
    Both test screenshots were taken on the same computer, a laptop running Vista Home Premium.
    You can clearly see the problem!

Maybe you are looking for

  • Error while data loading

    Hi Gurus, I am getting error while data loading. At BI side when I  check the error it says Background Job Cancelled and when I check in R3 side I got the following error Job started Step 001 started (program SBIE0001, variant &0000000065503, user ID

  • Registering Item types

    Hi Experts, I am a workflow developer. When we try to add configuration about the action to be taken when user clicks a task, we dont see required task IDs in the XML file that is generated. It does list some of the custom developed tasks but not all

  • PC to Macbook user- Just purchased refurb - SLOW!!!!

    2 weeks ago I purchased a Refurbished MacBook Pro 2.3GHz dual-core Intel i5-- Im completely new to mac as I've been a pc user my whole life. (Last laptop was a lenovo thinkpad - was actually really happy with it, it was simple and did what I needed i

  • Unable to release item recieved with management method release only

    hey i received few quantity from good receipt which is serial managed and management method is release only so sap didn't asked for serial no but when i issue that item out of sap through good issue it ask for serial no but actually there is no seria

  • Turning 81/2 x 11 document into small book

    How do I take a document that is on 81/2 x 11 sheets of paper and turn it into side by side reading like a book so I guess the pages would now be 81/2 by 5 1/2 and have it print that way.  I can make it do it to read but not to print.