Making episode based DVD in Premiere Elements?

Sorry, but this isn't a Photoshop Elements question, but there's no Premiere Elements section.
I notice all the DVD templates are for movies, that is they have a play movie button that plays ALL scenes, and then a scene menu separate scene menue that allows you to start the movie from specific scenes.
I want a way of making an episode based DVD, where there is no single play button on the main menu, nor is there a scene menu, but intead is a series of buttons on the main menu each of which plays a separate video, and each video played stops at the end of that video, and does not procede to play any of the others. I would actually like to make it replay a given video when it gets to the end (allowing for indefinite running of a particular video), instead of stopping and going back to the main menu.
If it is possible to do this in Adobe Premiere Elements, please let me know. Thanks.

Thanks guys for your help. However I discovered that I don't need to buy new software to accomplish this. I found that there a powerful customization technique I can use for fully editing the DVD menus in an Adobe Premier Elements DVD menu template/preset.
I discovered that the DVD menu templates, while not editable in Premiere Elements, can in fact be edited in Photoshop or Photoshop Elements, as they are just PSD files. The names of the buttons are layer groups and the specific naming conventions of the layers tell Premiere Elements how to handle them. For example, any button who's graphics are in a layer group who's name starts with "(+^)" is a button that takes you back to the first page of the Main Menu (the quotes aren't actually part of the layer name, so remember when customizing the buttons in Photoshop, to not use those quotes, I just used them to demark the text that appears in the layer name). Any layer group with a name that starts with "(+*)" corresponds to a button that starts playing a video at a Main Menu Marker on the timeline. Any layer group who's name starts with "(+-)" corresponds to a button that causes playing of the movie starting at the first frame (and removal of this makes the DVD behave just like a DVD with a series of TV episodes). Any layer group who's name starts with "(++)" corresponds to a button that goes to the scenes menu (which of course contains buttons that start playing a movie starting at a Scene Marker. And "(+>)" and "(+<)" correspond to buttons on the main menu that navigate go forward and backward through pages of the main menu (or if they appear in the Scenes Menu then they navigate forward and backward through pages of the scenes menu).

Similar Messages

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • When I try to burn a DVD in Premiere Elements 12 I get an Internal software error%0, line %

    When I try to burn a DVD in Premiere Elements 12, I get an Internal software error %0, line %1. This is the first time that I have tried to use this program.

    As suggested in the original reply in January, you will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • Unknown error 2130906112 while burning DVD in Premiere Elements

    Hi am trying to burn a DVD using Premiere Elements 3.0. My computer will go through the lengthy process of attempting to burn the CD. At the very end, the drive pops the DVD out and I get a message that states: Unknown error 2130906112. I have burned successfully in the past, but am unable to now. I have tried to do this about 7 times with this specific project and have had no success. I have used two different types of DVD+R (Memorex and Verbatim). My project is approximately 56 minutes long. Any help and/or advice is greatly appreciated!!!!

    Great news!
    I just can't see which is highlighted while doing so. I think it has to do with the template I chose in Premiere Elements while designing the movie.
    The lack of the Sub-picture Highlights (the official name for the indicators of which Button one has navigated to), could be caused by several things:
    1.) the inability of the PS3 to adequately display them. Like I said earlier, most people, that I know, use the PS3's for BD playing. The specs. are different for those, as opposed to the DVD-specs. I just do not know about the PS3.
    2.) could be a problem with the Template. Which one did you choose? I'll be glad to check it out (if PrE4 has it) and report any issues that I find. Did you modify this Template, say in Photoshop/PSElements? Could be that one of those modifications turned ON all Sub-picture Highlights.
    3.) could be a problem with the "authoring" phase of the Project. This is after the editing, and is where one assembles the Assets (Menus, etc.) and does the navigation. As PrE is semi-automatic, it does most of this for the user, with little intervention. Still, there could be ways to accidently mess something up here, though it's highly unlikely. Now, in my authoring program, all is done by hand, so I have hundreds of opportunities to make a mess of a Project - PrE shields the user from most of these.
    Now, to your questions:
    Can I use the Img software for all burning projects including CDs?
    Yes. You can do most forms of burning, including CD's (Audio, Video or Data), so long as you have the right types of files.
    What is the best way to organize and store my video files?
    This is the $64,000 question. So much depends on what one has, how they are likely to need to access them and what equipment they either own, or wish to purchase. I'll give you my scheme, though it might be overkill for you. Still, you can get an idea and are free to adapt any part of it for your needs.
    I work with several types of Assets: original (or stock) still images, Captured (stock, or client-supplied) motion, Audio (original, stock or extracted from the previously mentioned motion Assets, Menus (Templates and original creations), Titles (same) and then my Projects.
    I keep the originals on both a NAS (Networked Attached Storage) drive that is networked to all of my computers, and also on external storage HDD's. I also back up to DVD-Data discs. For Captured, original Video, I also store all tapes and do NOT overwrite/reuse any. I only work with Copies of any of the Assets (the Captures are probably the exception, as I have the tapes, should I need to re-Capture).
    I use several media browsers to organize my Assets. I then locate those necessary for a Project, and create a folder structure for that Project. Copies of the Assets are placed in that folder structure, beneath the Project name. Again - these are Copies, in case something happens.
    Depending on what I need to do, the Scratch Disks (set with Edit>Preferences) are usually kept within the Project's folder structure too. Same for Exports. As I use a different program to author DVD's (Adobe Encore), I create my Encore Project within this structure too. The files that I Export from PrPro (my NLE of choice), are the ones that I then Import into Encore for authoring the Project.
    When done, I Archive the editing Project and also the Encore Project, to another external drive. I will always make one additional copy of my output DVD as a backup, as I can use ImgBurn, or another utility, to Copy DVD.
    After all of this, I can then safely Delete my entire Project folder from the system. Remember, it contains no origianl Assets (other than Captured materail), as I have everything on the NAS, plus an external, plus the backup DVD-Data disc. Right now, I have about 30 1 - 2TB external HDD's that I use. Some are for backup, and some are to allow me to move my Projects between my laptop or my workstation.
    Hope that this helps. As I said, it's probably overkill, but much of the work that I do is for clients. If they come back with a change, or a problem, I want to be able to help them immediately.
    Good luck and good questions,
    Hunt

  • Burning dvd with premiere elements 11

    I burn video files on to dvds.  I always key NTSC widescreen.  Sometimes, the image fills the tv screen.  Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen.  How do I get the image to fill the tv screen?

    Thank you for responding to my problem.  I'm afraid the reading didn't help.  All of my 20 files were created with the same camera, the same project settings, the same equipment, etc.  But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall.  Most however, have a 2" black border around the image.  It makes no sense to me. 
    Date: Sun, 10 Mar 2013 10:32:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Burning dvd with premiere elements 11
    Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
    Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Import Billingual DVD to Premiere Element 10

    i tried to import a billingual (Cantonese/Mandarin) DVD into Premiere Element 10.  However, it only shows with Mandarin channel instead of Cantonese.  How could I import it with Cantonese?

    Welcome to the forum.
    To extract the supplemental Audio Stream (Cantonese, in your case), you will likely need to completely rip the VOB's, outside of PrE.
    Not sure which current ripping software is good for this, but this old Encore FAQ lists some that were pretty good, in their day: http://forums.adobe.com/thread/423743?tstart=0
    Others will likely have some favorites, and might know which ones do the best with supplemental Audio Streams, but I do not. I see recs. for VideoRedo, ReJig, and others, but have zero experience with them, and do not know their capabilities.
    Good luck,
    Hunt

  • Can't burn a DVD on Premiere Elements 12

    At 98% media encoding the DVD is spit out and I get the following:  internal software error:/premiere/elements/molecules/pre-mediacore/External/AuthorScript/Source
    Any suggestions? I need the video for a class this week!

    ATR,
    Thank you for the reply and suggestions. I did some more researching and found a suggestion to remove the stop marker at the end of my video....and it worked! Apparently the stop marker causes an internal error. Mystery solved.
    Thank you again for the ideas. I'm going to keep them on file for the next burn hic-up.
    ibed
    Date: Sat, 11 Jan 2014 22:12:58 -0800
    From: [email protected]
    To: [email protected]
    Subject: Can't burn a DVD on Premiere Elements 12
        Re: Can't burn a DVD on Premiere Elements 12
        created by A.T. Romano in Premiere Elements - View the full discussion
    ibed
    What computer operating system is your Premiere Elements 12 running on?
    Is this an external or internal burner?
    Would you say that this is a case of "it worked before but not now" or "it never worked before"?
    Although you cannot burn to disc DVD, can you burn your Timeline to folder. If so, the VIDEO_TS Folder from the burn to folder + ImgBurn to get your DVD-VIDEO on DVD disc may be your answer to this time crunch.
    Let us start here and then decide what next depending on your answers.
    Next step may be getting more information about your project settings and properties of your source media.
    Could you post a screenshot of the error message that you are getting?
    More details in the morning when we will be watch for your follow up.
    Thanks.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6004504#6004504
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6004504#6004504
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6004504#6004504. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

    I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC.  In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:".  I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive.  I disabled the virtual CD and rebooted.  This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn.  I tried the burn again and the DVD burner was no longer recognized.
    I then removed PE13 and reinstalled it - no errors during the install.  Tried again and same result - no DLLs.
    Any help would be greatly appreciated.
    Thanks for your time,
    Mark

    PRE_help
    For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
    a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
    24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
    preset?
    For Premiere Elements
    If the burn to is to DVD disc for DVD-VIDEO, the user is
    confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
    within the preset.
    If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
    Premiere Elements 13
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
    with any oversized stills.
    ATR

  • Issue burning DVD in premiere elements 13

    To shortly summerize my problem:
    When I try to burn a DVD premere elements is not really working like it should imho:
    At 98% it first gave an error that there were no plugin DLL's. Disk was ejected but useless.
    Second and third go it gave an error at 98% indicating that the writespeed was incorrect. Error message was wider then the container showing the message.
    Tried burning an DVD ISO to harddisk instead: no errors but also no file. Doublechecked file location, reburned, same issue
    Tried to encode to MP4 to harddisk: no issues
    Tried reinstalling premiere elements: same issues
    Does anyone have a good idea on what to try next?
    My computerspecs are as follows:
    win8.1 x64
    4790Ti
    8gb ram
    No dedicated video card: intel hd graphics 4600
    simple 8 speed usb DVD burner (keep in mind it also won't burn ISO files to harddrive...)
    Computer fully patched and up to date, including latest quicktime
    Obviously premiere elements 13, but the Dutch version.

    Petter01
    Juergen may have hit on a critical matter as it relates to the success or failure of Premiere Elements 13 and its Burn To: Blu-ray ISO Image (25 GB).
    Other ISO Image opportunities (for DVD and AVCHD) in Premiere Elements 13 have not yet been brought into the matter.
    For many posts, Juergen has been reporting that he can generate a  Premiere Elements 13.iso image for Blu-ray, but when the .iso is taken to disc, the player does not recognize
    the disc content. Only recently has he mentioned that the issue seems to be related to the file size of the .iso image produced. He said that if the Premiere Elements 13 iso file exceeded about 1.1 GB, the Blu-ray disc format on Blu-ray disc produced in ImgBurn could not be read by the players.
    Last night, I checked into that to see if I could confirm Juergen's observation. I have. This is a serious setback for Premiere Elements 13 which finally offers an Blu-ray ISO Image as an alternative to the Burn To: Disc product.
    So, for you to confirm.....
    1. Are you doing Publish+Share/Disc/DVD with Burn To: = ISO Image?
    2. If so, are you actually seeing an .iso image generated and saved to your computer hard drive?
    If so, what is the file size of the .iso file produced?
    3. What is the file size for the DVD .iso file that you take into ImgBurn for burn to DVD disc to the correct disc files system,
    is the disc content recognized by your player? If so, what player.
    Thanks.
    ATR

  • How to burn my Video to a DVD in Premiere Elements 7?

    I have a
    video of my son's Basketball team and I save it
    on my Hard Drive thru Premiere Elements.I did make it a
    project. I now want to burn it onto a DVD and don't want
    anything more such as timelines and or screen lines.
    Can someone step me thru the process?
    Thank You

    THEVIDEOKID
    We have a lot of details to sort through systematically to get your the DVD-VIDEO that you want, but let us try some preliminary questions and answers to get started:
    a. The file that you clicked on to open your video in the Premiere Elements 7 Timeline...did it have a file extension of .prel? That is the file extension of a Premiere Elements project.
    b. When you started that project, did you set it up for NTSC DV Standard or Widescreen or the PAL counterpart?
    c. If you are working with the project.prel, when you open the project.prel, do you see your video on the Timeline? Does it play back in the Edit Mode Monitor if you hit the Play button of the Edit Mode Monitor?
    d. When you get to Share/Disc/Disc, what preset did you set...NTSC Standard or Widescreen or the PAL counterpart?
    e. After you have hit Burn in the Burn Dialog and during the encoding burn, the image in the Monitor stays at the image where you left the Timeline indicator back in the Edit Mode....nothing changes there, except maybe the image will dim during the encoding/burning process.
    f. IMPORTANT...do you get a message saying the the burn to disc has been successfully completed, followed by the DVD burner tray opening?
    g. If so, put the DVD back in the burner tray, go to My Computer/DVD drive. Right click the DVD drive and select Explore. Do you find content of two folders, one named OpenDVD and the other VIDEO_TS?
    Where are you trying to play back the DVD-VIDEO that you believe that you created?
    ATR

  • Burning dvd on premiere elements 11

    when i try to burn a dvd project it hangs on the indexing screen and doesnt index

    mwcsheff
    What computer operating system is your Premiere Elements 11 running on?
    Is this "it worked before but not now" or "it never worked before" situation?
    What are the properties of your source media and what are you or the project setting as the project preset?
    (please refer to Edit Menu/Project Settings/General and the readouts for Editing Mode, Timebase, Frame Size,
    and Pixel Aspect Ratio)
    Where are the source media for this project stored?
    Where are the Scratch Disks located and how much free space is at the locations?
    Let us start here and then plan troubleshooting strategy.
    Thanks.
    ATR

  • How to burn to DVD in Premiere Elements 8 to play on DVD recorder.

    I'm using Premiere Elements 8 with Windows 7, quad core i760 and 8 GB RAM. When I burn a project to disc, it will play on this PC but the disc is not recognised on my XP PC nor by my DVD recorder. My guess is that I'm burning as an HD DVD but can't see any way of changing this. Can anybody point me in the right direction please?

    Geoff, I think you're chasing the wrong issues. The least likely problem is that Premiere Elements is producing unreadable discs.
    Have you burned your DVD files to a folder on a hard drive rather than directly to a disc?
    Have you tried using DVD-Rs or DVD+Rs rather than DVD-RWs (which many DVD players can't read)?
    Your source files -- no matter where they come from -- will have no effect in how your DVD plays. Once it's all been transcoded, it's a matter of your disc player reading your disc. If that's not happening, you need to troubleshoot whether this issue is a problem with the discs themselves, a problem with your DVD player or a problem or a problem with your burner.
    Burning to a folder on your hard drive will eliminate Premiere Elements as the cause of the problem. If the program can produce a VIDEO_TS folder full of VOB files, then you know the problem is either in your discs or your hardware.

  • Cannot burn DVD from Premiere Elements 4

    I have Premiere Elements 4.  I am trying to burn a DVD of a slideshow I created in Photoshop Elements 6.  I have burned many copies of this DVD in the past month successfully, in PE4.  Now today all of a sudden it won't burn them any more.  When I click on "Share" and "DVD", a message says the program has encountered a problem and needs to close, and the program locks up.  Here is the detail of the error message:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Adobe Premiere Elements.exe
    Application Version: 4.0.0.0
    Application Timestamp: 46df9114
    Fault Module Name: StackHash_a34a
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Code: c0000005
    Exception Offset: 00000000
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: a34a
    Additional Information 2: c9c5f4fd744690d388ab9d5b3eb051a7
    Additional Information 3: cb2e
    Additional Information 4: 650bb5690556a17e911375b94d3e16f0
    Can anyone help?
    Thanks,
      Teresa

    Hi Thresa,
    Forget about Premiere Elements 6 and use Premiere Elements 4, we still do on a new 64 bit Quad Core i7 Work Station Windows Professional and it runs better than ever. We have been doing HD 1920 x 1080 slide shows for 3 years, no problems burn to Blu -Ray or Export to Pro Tape.
    I did have a problem with a Pentium 4 3.2Ghz and hyperthreading , but, discovered I had 1,440 temp files slowing the system down. Try %temp% in Search and delete files if you have any ?

  • Pixelation/Horizontal Lines burning DVD in Premiere Elements 10

    I am trying to burn a DVD in Adobe Premiere Elements 10.  The original footage is in 1920x1080 from a Canon HD camcorder.  I just burned a project last week that burned fine.  This one is burning with horizontal lines that appear to be "pixelating" the faces of people in the video.  I've tried interlacing, reversing field dominance, and exporting to an mpeg first, but all with the same result.  When I make the footage into an mpeg, it is crystal clear on the screen.  As soon as I burn it to DVD, it messes up.  I have a feeling it has to do with the program not appropriately converting it to the correct format for DVD, but appear to be missing something.  Any suggestions?

    Are you judging this DVD quality when played on a TV and standalone DVD player? It should look fine there.
    If you're playing it on your computer, a number of issues could be at work. Most computer playback software doesn't de-interlace well. (DVDs are interlaced, most TVs are interlaced and computers are not.)
    So try it on your TV/DVD player. And, if you want to give it a test run on your computer, play it with a program like VLC Media Player, which does a better than average job of de-interlacing. But don't play it at full-screen. DVDs are only the equivalent of 640x480 in size, while computer monitors are usually at least 4 times that resolution and can exaggerate issues.
    All of this would expain why you're not seeing this interlacing issue when you output a WMV.

  • Importar dvd a premiere elements 2.0

    hola...al importar un dvd a elements crea varios tramos de audio y video, al reproducirlos entre un tramo y otro hay negro y un pequeño salto de audio...existe algun plugin o forma para que no ocurra esto...seria de gran ayuda ub aporte..gracias

    Hallo Thomas,
    in meinen PE 1 Zeiten hab ich das so gemacht, dass ich die Originalvorlage umbenannt habe und einer nach meinen Vorstellungen bearbeiteten Kopie den Originalnamen überlassen habe. Dann lädt das Programm meine Datei als Original.
    Sorry, quick and dirty, aber funktioniert.
    Grüße
    Matthias
    www.wertvolleswissen.de

Maybe you are looking for

  • Attachment in mail from Application

    Hi all,     i want to send some result to higher persons as mail from my program.the result should be send as Excel Attachement. Is it posssible to do.If so kindly givme your suggestion..

  • Error mzm.whodaifs.pkg cannot get past this to install

    I'm having the an issue and can't seem to resolve it. I tried deleting the com.apple.store folder to clear out the apple store cache and still no luck. Cannot figure out how to fix this. It seems to download but does not transition from the download

  • I am trying to extend my existing wireless network

    I am trying to extend my existing wireless network beyiond an extreme and an express by adding a further express. Is this possible?

  • Oracle Sequence migration during an upgrade

    Hi, Firt of all Iam not a DBA, But we have a problem which I would like to know more about , we are planning on migrating to Oracle 8.1.7 from an older version and new Oracle Databases were created from the DUMP taken from old database..and when I wa

  • Allowing Static IP Addresses for Clients

    When I setup my two 8510 WLC's, I think I may have not allowed static IP's for clients. How can I see on the CLI or GUI if that setting is enabled or disabled? I can't find this anywhere.