Making podcasts show as "speech" when changing the genre; not working

I download a lot of podcasts that I want to keep. I have gone into "get info" and changed the genre to "speech" to be consistent with some other similar info I have in my collection. It appears to change the status to "speech" but the episodes still so in the "podcast" list rather than moving over to "speech" in the music category.
I'd like to avoid converting all of them to AAC (or other music format) each day.
Is there a way to have a podcast change genre so that it shows with my other stuff categorized as speech?
Thanks

It doesn't say anything about "Other iTunes Store Features" but it does have "iTunes U & Podcasts". However, in whatever way I get to the Express Lane, it keeps on asking for an order number (presumably from the store), and won't let me continue.
For now I guess I'll have to try just changing the name and hope I can change it back. Until I can get a hold of someone at Apple, anyway.
Thanks Roger!

Similar Messages

When changing the drive letter for the ipod itunes still wont come up

when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there

Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.

SPL block when changing the Address manually at Sales order level

Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVR

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Locale Input changes on Mac OS X Lion when changing the view state

On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
        <![CDATA[
            protected function gototest2(event:MouseEvent):void
                this.currentState = "test2";
            protected function gototest(event:MouseEvent):void
                this.currentState = "test";
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="test" />
        <s:State name="test2" />
    </s:states>
    <s:Button label="go to test" includeIn="test2" click="gototest(event)" />
    <s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
    <s:TextInput includeIn="test2" />
</s:WindowedApplication>

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.

IMac freezes when changing the screen saver

Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)

I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew

Always assets links are missing when changing the location.

Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!

Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal

Why does it take up 100MB/track when I change the genre?

Right so I have all my songs on my itunes library and identical on my 60gb ipod photo.
My itunes were quite disorganised so I decided to change the genres and make everything nice and neat. When I plug my ipod in to automaticlly update all track and playlists it fills up the ipod remarkabley quick, at the rate of a gig every 100 tracks or so. I updated 700 songs and it filled up my ipod by 6.5 gig!!!!
this is with songs that were already in the library, I had simply reorganised them.
Someone please help.

Adam hello,
you do not say what operating system you have on your computer but judging from what is happening it would have to be Tiger 10.4.x as it now has the ability to read music files in iTunes and make changes to any that do not conform to the latest technological advances in file formats and management each time they are accessed, until they meet the latest standards... simply playing these files will improve them ... as each time a song is played the playcount is updated and the new rules applied to the file.
TP

ITunes 11 - how can I change the genre of a movie now?

So I've had iTunes 11 for about 3 hours now and so far it *****. One of my main problems is I can't find how I can change the genre of a movie anymore. I used to do this from Get Info so I could organise all my movies in to my own genres that make sense to me which helps me find what I want to watch when using Apple TV.
It will still let me do that for movies I bought before I "upgraded" to 11 but for the movies I bought this evening, after upgrading, the genre drop down is locked down.
Am I just looking in the wrong place? Or have Apple somehow got the idea that pointlessly preventing your customers from organising their content in their own way is somehow an improvement and I'm stuck with their nonsensical genre classifications?
Same thing goes for movie titles now I think of it - I've edited movie titles after purchase (e.g. I've put HP1 in front of the title of Harry Potter and the Philosopher's Stone and HP2 in front of Chamber of Secrets) so that series list in watching order, rather than alphabetical order, on my Apple TV. It's not letting me do that from Get Info either
Please someone tell me I'm just doing it wrong - I don't think I've the patience to jump through the hoops necessary to get 10.7 back!

I had the same bug in songs. It was directly related to tracks purchased in the iTunes store, they wouldn't allow any changes, it was all grayed out.
Here's how I got around it. When I selected more than one item and any other item was not from the iTunes store it would allow me to Get Info and change everything with no problems.
My suggestion is that if you need to, add in a movie from your hard drive (anything at all, it will be a dummy placeholder) that you can you use to select along with the one you need to change. Use command click to select non-contiguous files (even works in different genres), then get info (or command i) and then change your info. You can keep using the same dummy file for as long as you need to to fix the files with incorrect info, then delete it when done.

I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4?

I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.

1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

ITunes won't allow me to change the genre

I have a cd on iTunes and it says that it is Pop, with the exception of one song that I downloaded from iTunes that says it's country. The cd is supposed to be country and so I've tried to change it by going into Get Info and change the genre. It doesn't change no matter how many times I've tried. Any suggestions?
Windows Vista

Hi Chris,
I too am having the same problem as mentioned previously. When I try to edit the genre, and info for my songs, all I get is a greyed-out screen. You mentioned that the songs could be read only, or the folder might not be selected for write permission. Could you please explain further how I can make this adjustment?
Thanks!!

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works. I can CREATE the list but, the songs that I have played don't accumulate in the list. I haven't changed the steps that worked for me previous to the upgrade. I have no idea

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
I can CREATE the list but, the songs that I have played don't accumulate in the list.
I haven't changed the steps that worked for me previous to the upgrade.
I have no idea how to fix this and can't find mention of anyone else having a similar problem.
Any suggestions?

Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
tt2

I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank

Making podcasts show as "speech" when changing the genre; not working

Similar Messages

Maybe you are looking for