Making sure page prints on page

Often times when I print from these forums, the right side of the page gets cut off and does not print on my printer. Is there a way to configure it so it prints the entire forum page on the paper?
Thanks.

To test it, I just printed this page and it printed fine.
I suppose your are using Safari, Under File I selected Print then when the printer window showed up
I choose "preview" then click "Print" and it printed all this page.

Similar Messages

  • When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application." Using OS X 10.6.8

    When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X."
    I've run the software update several times. Pages is located in my iWork '09 folder in Applications. Using OS X 10.6.8

    Delete and reinstall it.
    (104030)

  • Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    Buying more hard drive space is a very valid option, here.  Editing takes up lots of room, you should never discount the idea of adding more when you need it.
    Another possibility is exporting to MXF OP1a using the AVC-I codec.  It's not lossless, but it is Master quality.  Plus the file size is a LOT smaller, so it may suit your needs.

  • CS2 crash making web pages

    Whenever I launch the automated aspect for making web pages of photographs CS2 crashes. I have used this before using Tiger but with Leopard now it is a non performer. Any ideas

    Have You trashed the prefs yet or tried starting from a new user?

  • Besoin de laide sur pages

    J'ai un mac et j'ai besoin de l'aide.. comment on peu t'on faire pour que sur pages il corrige non seulement les erreurs mais les verbes aussi? (comme pour qu'il corrige le temps des verbes et tout?) merci

    Pardonnez mon mauvais français.
    Correction sur épreuves des documents (un pue!)
    Lire le Guide de l'utilisateur. Vous pouvez télécharger à partir du menu Aide dans Pages.
    Cordialement,
    Ian.

  • Un fichier texte crée sur Pages pourra il être lu par Word ou Open Office sur Pc?

    Un fichier texte crée sur Pages pourra il être lu par Word ou Open Office sur Pc?

    I hope Google translate is correct.
    Utilisez la commande Fichier -> Exporter pour enregistrer le fichier en tant que .txt ou .doc ou .rtf.
    Use File > Export to save the file as .txt or .doc or .rtf.

  • Making sure black is black

    My print shop requests that I check my document to make sure that anything black on the pages is black, not CMYK or RGB.
    I see the Black tile on the Color panel, but don't know how to see that when the black is indeed based on CMYK or RGB.  (As I recall, I changed a couple black text boxes to CMYK, thinking that was a good thing.  Now I know it's not.)
    Where do I adjust the color to make sure the text black is black?  And although this forum doesn't address Illustrator, the same issue may be there as well, so I hope this will help me fix anything over there.  (Ugh, and a few graphics are in Paint!  Bigger question than I thought!)
    Thanks!

    After making sure your InDesign document color space is CMYK, just open your Separations Preview.
    In the Separations Preview there should be plates for Cyan, Magenta, Yellow & Black, (also Spot Colors if any were used)
    Select "View Separations" and turn OFF the Black plate, and anything that is Black only should disappear. If it doesn't, then the object has some values in the other plates - C, M, Y
    While you have View Separations active you can move your cursor over any element in your document and the color values of the color will show up in the Separations Preview panel.
    Since CS4 Illustrator has finally gotten a Separations Preview, but it doesn't have as many features as the one in InDesign.
    Acrobat Pro has an Output Preview that is even more useful.

  • I am trying to print redplum coupons and I can't, help.  I have updated java, adobe flash, and made sure my printer was set on default.  I am not sure what I am doing wrong.  I have contacted redplum and no one will help.

    I am trying to print redplum coupons and I can't, help.  I have updated java, adobe flash, and made sure my printer was set on default.  I am not sure what I am doing wrong.  I have contacted redplum and no one will help.

    No Apple response???  Redplum/Valassis will not help either.  I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum.  What a pain to do anything with my Mac or find any help.  I honestly regret buying this buggy OS.
    Anyway, here is what I found, FYI:
    http://ubuntuforums.org/showthread.php?t=483415
    As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
    - altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
    - copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
    ..everything started working.
    It's still slower than windows, but I can live with that
    Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
    socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
    I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.      
    Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
    Posted on November 25, 2008
    Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
    sudo gedit /var/log/cups/error_log
    If you see anything like the following, the solution may be simple:
    [Job 201] Unable to write print data: Broken pipe
    PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
    System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
    If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
    Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
    Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
    Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
    If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
    Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
          http://ubuntuforums.org/showthread.php?t=483415

  • I got given a $100 gift card and when i enter the code (making sure it is correct) it says its invalid

    I recieved a $100 itunes giftcard for my birthday and when i try to enter it, it says its invaled!
    ive tried many times making sure everything is correct but it doesnt work????

    Was the gift card issued in the same country as your account is based ? They are only valid in their country of issue. If it was and this page doesn't help then you will need to try contacting iTunes support (you will need to give them the serial number and activation code from the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • After updating to 7.0.6 my iphone no longer shows in itunes. However it is recognised by my PC (windows 8) when click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date. Has anyone else had this problem?

    Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks

    Device not detected in iTunes for Windows

  • I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132.  Please help.

    I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132.  Please help.

    I had this exact issue.  Spent over an hour on the phone with apple support, they couldn't resolve.  Here is what I ended up doing, that worked.
    1.  Turned iTunes match off on all my iOS devices
    2.  Deleted the offending playlists from the iOS device they originated on
    3.  Started iTunes, let it run (literally) for an hour before it became responsive.  First thing I did, before clicking anywere else was disable iTunes match.  If I clicked anywhere, it would clock for another hour.
    4.  Let iTunes run overnight, by morning it had cleaned out the repeating play lists.  This got my Mac/iTunes back to an operable state.
    5.  Restore iPhones from backup in iTunes.
    What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone.  The culprit playlist did not, for some reason, duplicate itself on my two iPads.  Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices.  Seems like a reasonable theory.
    I have not yet re-enabled iTunes match.  So, no idea what will happen if I decide to go back down that rabbit hole.

  • I rcvd an AppleService emaiDue to recent updates we are asking many of our customers to confirm their information this is nothing to worry about. We are making sure we have the correct information on file..." Is this real or a scam?

    I rcvd an AppleService email
    Due to recent updates we are asking many of our customers to confirm their information this is nothing to worry about. We are making sure we have the correct information on file and that you are the rightful account holder. Failure to comply with this may result in your account being suspended.
    Is this real or a scam?

    If you changed your Apple ID, you will not  be able to update any of the content that you used in the past. The worse case scenario here would have been to change the password. Really all you needed to do was go on the Apple site and change the password, unless you provided them with information. This will make it difficult for you to deal with turning off Find My iPhone and other Apple ID related steps. All you really needed to do was delete the email.

  • My photos aren't being moved automatically from my iphone 5c to my laptop. i've tried making sure the email addresses match. how can i be sure? or is there another problem.

    my photos aren't being transferred from my iphone 5c to my laptop. this option had been working on my 4s until just before i changed over to the 5c. i have tried making sure the email address on the phone and the laptop agree. perhaps i haven't done that correctly. or is there another problem?

    Hi graylady66,
    Welcome to the Support Communities!
    Have you set up Photo Stream on your iPhone 5C?  I can't tell what computer you have from your post, so I'll include all of the Photo Stream information for you:
    iCloud: Photo Stream
    http://support.apple.com/kb/PH2596
    iCloud: Set up My Photo Stream
    http://support.apple.com/kb/PH13693
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989http://support.apple.com/kb/TS3989
    Cheers,
    - Judy

  • Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Well!
    If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
    This does not have to be huge just big enough to house your most current Jobs
    Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
    This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
    The Drobo would be relegated to Vaults and backups
    You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
    This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

  • When I attempt to scan a document to my computer I get the following message make sure the printer s

    I have an HP Photosmart 5514 printer.  When I try to scan a document to my computer I get the following message
    "Make sure the printer software is installed on your printer, and that 'Scan to computer is enabled via the pronter software"

    Hello Stevefried,
    Did you install the printer's software on your computer via CD or download?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • PS CC issue on a Surface Pro 2

    Howdy! So, everything is working great in PS CC on my Surface Pro 2, except if i rotate my tablet to portrait mode.. The main window stops with a bunch of empty space below it. It will not stretch any further down than what you see. Also, looks like

  • Adobe CS5.5 Installation problems on WinVista

    installing adobe cs5.5 on windows vista, bootstrapper error, missing installation files, adobe cleaner ran, but doesn't recognize cs5 installation. removed anti virus package(s), no effect. removed an problematic adobe reader X, no effect. adobe clea

  • Strange human task error in BPEL process

    When we call a human task in BPEL process we are facing following error . We can't reach any information about that? is there any one face before? Thanks. Exception Trace: javax.servlet.ServletException: Cannot find work items. An attempt to fetch th

  • WLSE 2.11 occasionally sends a P1 notification e-mail

    For some AP 1200's, WLSE sends a "P1 notification... Device was not reachable via SNMP" followed by a "OK notification ... Device was reachable via SNMP" after a few minutes (between 1 and 5 minutes). Current poll interval setting is 5 minutes and fr

  • Cannot sigh into sites in Safari

    I cannot sign into sites in Safari. I put in user name and password and the sites just cycle back to wanting the username and password. I got here through Firefox. I have removed all of the cookies and reset safari, neither of which worked. What now?