Making Your Own Map Component in crystal xcelsius
Post Author: sunbrain
CA Forum: Xcelsius and Live Office
http://www.liwaili.com.cn support
http://www.liwaili.com.cn support
http://www.liwaili.com.cn support
Making Your Own Map Component in crystal xcelsius
Although the Map components in Crystal Xcelsius are cool, your choice ofmaps is severely limited. This might leave you wondering how you can createyour own Map components in Crystal Xcelsius. Although there is no way totechnically make a Map component, you do have a workaround that you canuse to create interactivity based on your own maps.As an example, I created the dashboard in Figure 13-25 to report on popula-tion data for the five counties in Rhode Island. In this dashboard, movingyour mouse from county to county changes the data that displays.
Take a closer look at this dashboard to see that the map is nothing more thanan Image component that has a few Icon Selector components on top. Hereu2019show it works:1. Import an image of the map by adding an Image component onto yourdashboard and selecting the image using the Filename property, asshown in Figure 13-26.
2. Add Icon Selectors on each point in the map where you want interactivity.These icon selectors provide the hot spot areas on your map (seeFigure 13-27): that is, the areas that give you interactivity at run-time.
3. Expand the selectors to ensure that you optimize the hot spots on yourmap. (See Figure 13-28.)You can expand the Icon selectors by clicking on the bounding box han-dles and dragging them until the selector is the appropriate size andshape. Expanding the size of the selectors reduces the chance of hittingdead spots that donu2019t have interactivity at run-time.
At this point, the icon selectors can be given some functionality basedon some scenario, but thatu2019s not your focus here. The point is that afteryou configure the icon selectors with some functionality, you haveessentially added interactivity to your map.Time for smoke and mirrors.4. Make the icon selectors invisible so that only the map is showing bygoing to the Appearance tab and adjusting the Transparency propertyto 0, as shown in Figure 13-29.The final effect is a custom map that has interactivity.
Keep in mind that you can use this technique with any image; it doesnu2019t have tobe a map per se. For instance, you can use this technique with organizationalcharts, floor plans, park maps, and various types of diagrams. Incorporatingpictures into your dashboards in this way can help you add something extrato your dashboards.
liwaili.com.cn
http://www.liwaili.com.cn support
Post Author: sam pewgo
CA Forum: Xcelsius and Live Office
Hiit is rather disappointing that one can not import maps into crystal xcelsius as this is my main operation, the alternative approach that you so in great detail, whilst it works is not sutable for the tasks I carryout. I have access to all the maps for our operations and some are quite detailed, however I cannot use them? becuase your programme cannot import them. Is there a tool or method that you guys use to get the maps in to crystal xcelsius that you would be willing to share, as I would hate to have to find an alternative product to do that job Thnx Sam
Similar Messages
-
Making Your Own Map Component in crystal xcelsius 2008
Post Author: sam pewgo
CA Forum: Xcelsius and Live Office
It was disappointing that one could not make or import users own maps into CX 4.5has this issue been resolved in CX 2008?? Thanks in advanceSamPost Author: sam pewgo
CA Forum: Xcelsius and Live Office
Thanks DHAGIts a shame that we have hundreds of our own maps that we cannot use in Xcelsius and we are reluctant to buy any more, especially when they are none proprietory types, we need to use maps such as ESRI, MAPINFO or DWG types. Business Objects already know this of course as their Crystal Reports communicates with ESRI Arcview/ArcGis mapping products.Please update this product to use these, or make piece of software that will allow us to make our own map components and import them into XcelsiusAPART from my little blast! that said its a great productSam -
Can we have our own map component in Xcelsius 2008 ?
Can anyone help me how to use our own MAP in Xcelsius 2008.
For an example, i would like to use the map of India duly marked for its states also.
Thanks in advance.
BaaRaa.Hi,
You can download the Add-On from this link and use it.
http://www.reportex.co.uk/xc_maps.html
Regards,
Senthil k -
Help with making your own theme... (question)
I have a Imovie HD 6.0.3, I wanted to make my own theme. The other themes are great, but i want to create my own, so I could show to make friends. I cant find anything related with making a new theme. PLEASE, PLEASE, PLEASE help me...
Hi
As Klaus1 writes - or taking the full step over to FinalCut.
Here there is no themes in Express and a few title themes in FC Pro.
BUT - When You master it - You can make nearly anything You like.
Except themes - ready to be imported into iMovie - This require even more skill
and very special tools eg to make the drop zones etc.
Your - Using FCE/P and loving it Bengt W -
The uploader that allows me to uplaod my photos from Iphoto is no longer working consistantly. WHen I have a sight that where I am supposed to " CLICK HERE TO ADD PHOTOS" and I click, nothing happens. Sometimes after 45 seconds it might open up the IPhoto page but then the page is frozen and the cursor can't activate any thing on the page. I cannot scroll down the photos , make a selection or close the page. Another 60 seconds may goby and then the IPhoto site will close.
I use it for Ebay and also things like uploading photos for making photobooks and playing cards. I have done quite a bit to try and sort this out and I am at a loss. Not really very computer smart either! Emptied cache,restarted,checked security,looked at Java....and called Ebay for help. I really do not want to add another browser, like FireFox, as I didi that before and it interferred with the MAIL account. Any suggestions?
I have a 3 year old MAcBook Pro...and of course my telephone assistance has expired.
Thanks for any response.The uploader that allows me to uplaod my photos from Iphoto is no longer working consistantly. WHen I have a sight that where I am supposed to " CLICK HERE TO ADD PHOTOS" and I click, nothing happens. Sometimes after 45 seconds it might open up the IPhoto page but then the page is frozen and the cursor can't activate any thing on the page. I cannot scroll down the photos , make a selection or close the page. Another 60 seconds may goby and then the IPhoto site will close.
I use it for Ebay and also things like uploading photos for making photobooks and playing cards. I have done quite a bit to try and sort this out and I am at a loss. Not really very computer smart either! Emptied cache,restarted,checked security,looked at Java....and called Ebay for help. I really do not want to add another browser, like FireFox, as I didi that before and it interferred with the MAIL account. Any suggestions?
I have a 3 year old MAcBook Pro...and of course my telephone assistance has expired.
Thanks for any response. -
Dimensions of a lens hood - making your own
I want to make my own lens hoods. How do I figure out the appropriate dimensions for the hood? I assume there are different formulas for petal, round, and rectangle hoods.
MY EQUIPMENT:
EOS Rebel T4i
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
(2) B+W 5.8 010 UV - Haze 1x MRC (F - PRO Series filter)
HOYA 58mm HMC Multi-Coated ND8 FilterWell you could do all of that but unless you already own the materials I think it's going to cost more than ready made ones that fit properly & can be reversed for storage / lens cap installation. I say this as someone with a lot of experience working with fiberglass and who has fabricated many things using it. Here's the link to a DIY project for my underwater camera.
http://plus.google.com/photos/116179596240613012497/albums/5161077059071628785?banner=pwa
And this is a slightly bigger project I'm working on (it's my day job).
http://plus.google.com/photos/116179596240613012497/albums/5352917643688876417?banner=pwa
"A skill is developed through constant practice with a passion to improve, not bought." -
Thailand Map component in Xcelsius
Hi all
I want to make Dashboard by use Xcelsius tool. It have some problem about Thailand map component.
In Xcelsius map component there are only 72 provinces but nowadays there are 76 provinces in Thailand.
What should I do?? If all developer help me to fix this problem ,I can work more easily.
Thank you very much.
Yenzaa form ThailandHi Yenzaa,
you have two options, take a look at following thread:
Re: World Map
Regards from Germany
Victor -
Making a component to view my Own Map !!
Dear all,
I am developing a website with jsf and richfaces, but now, I'm in a state that I need to show a detailed map of my city to the user. I looked around to find a component that make it work, but I couldn't find one!
Is there anyway to show my own detailed map (except google map) in a jsf component and what is it?!?
or, if there is not one, how can I make a component that gives an image as input map, and makes available zooming in and out on the map, and selecting a point.
my second question is, how can I visualize addressing??! I mean that, how can I let user to make an area selection on the map and I write the address with the user's selection ?
please help me! a component for viewing my own map that is an image ?!?!Such a JSF component doesn't exist yet. Look at the Google map API and integrate it. Basically JSF components does nothing much else than taking some variables and outputting some plain vanilla HTML, so it shouldn't be that hard to put all the HTML/JS of the Google API together in a JSF component.
-
XCelsius Map component - how to hide mouse over region value?
Hi guys,
I have one problem with a map component:
Please open standard Xcelsius map sample: File -> Samples -> Map
If you turn your mouse to state, for example Alabama you will see "Alabama 31.66"
I need only "Alabama", how to hide this "31.66"?
I created colored map but user should not see the value, he should see just name of the map region
Any ideas?
Thanks in advanceQuestion answered
Option is on the Apperance - Text tab -
How can i add a new regional map component in xcelsius 2008 ?
hi,
we need to add a new regional map component in xcelsius 2008 , how can i do it ?
Where do I find any examples ?
ThanksYou might want to check out the Any Map Component found on the Marketplace: http://www.ondemand.com/information/xcelsius.asp. Then click on Visit the Marketplace to view all add-ons.
This is one of the cool components that the users created using the Xcelsius 2008 Component SDK. -
Component integration: Control framework / create your own gui controls
Hi,
Does anyone know where to find documentation about creating your own gui controls, like cl_gui_picture.
For example we would like to make a zcl_gui_movie !!!
Kind regards
Keld GregersenHi Keld,
Check out /people/thomas.jung3/blog/2004/09/01/using-net-windows-controls-in-the-abap-control-framework
And
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
I have been able to create and use my own control in the SAP GUI - but I'm still trying to figure out how to handle any events raised by that control.
If all you need to do is use the control to display something (like a movie!) it should work...
If you can get some form of event processing working PLEASE let me know!!!
Cheers,
N -
Post Author: jezbraker
CA Forum: Xcelsius and Live Office
Anyone else having problems getting 4.5 files to open in 2008? I create a nice simple new xlf with a simple xls behind it and a just a grid component in 4.5, then try open the file in 2008 and i get... Crystal Xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of Crystal Xcelsius.im on the following versions...Version 4.5Application Version 4.2.4.3File Version 1.1.0.2Version 2008Application Version 5.0.0.99Build Number 12,0,0,121 I'm hoping that this is just a version issue with what was on ESD... the help file seem to suggest upgrade is simple so would but good to here of folks having sucess - and if so what versions your on thanks!jez.Post Author: jezbraker
CA Forum: Xcelsius and Live Office
well i hope thats the case... but its a bit strange that neither the beta versions i tested or this ESD version (its not very clear as to if its pre-release - nothing on the splashscreen/about to indicate its not the full thing) can open 4.5 files... suggests that the beta did not cover backward compatability which is a bit concerning :(hopefully im just missing something simple!from the help file in the '08 version i have here...Xcelsius supports the ability to import a visualization created
with Xcelsius 4.5. This import ability lets Xcelsius 4.5 customers upgrade their
existing visualizations to take advantage of the new features of Xcelsius 2008.
Backup your current XLF, JPEG, and external SWF files before upgrading your
visualization.
Note: Xcelsius 3.0, 3.5, and 4.0 files cannot be
imported into Xcelsius 2008. To use these files in Xcelsius 2008 you must first
import them into Xcelsius 4.5, then import the files into Xcelsius 2008. -
Interfaces for your own classes - do you bother?
Hi All,
before anyone gets upset, I did post a shorter version this to the Java Prog forum a couple of days ago. I'm reposting here because the thread was pushed down the list just as comments were getting interesting, and I was tossing up which forum was most appropriate anyway...
OK, I'd like to pose a general question on the use of interfaces with your own classes. I am totally behind the concept of using appropriate interfaces for declaration of vars, parameters etc (i.e. use "List" rather than "Vector"), but what about your own classes?
If I have a class in my application that doesn't fit into any kind of framework or class hierarchy, subclass of object basically, should I write an interface with all the same method sigs and use that rather than the class for my vars, params etc? This would make things more flexible in future, enabling you to swap classes in and out of your app more easily.
Taking it a step further, how's this for a design methodology: For every class you write (once again classes that don't fit into your own or somebody else�s hierarchy or framework) do the following
1. Create an interface (MyInterface) that maps 1 to 1 to that class (MyClass), with all the same method sigs.
2. Make the constructor private and manage all the creation of instances of MyClass through a factory that returns objects of type MyInterface.
If you do this there will be no mention of any of your concrete classes anywhere in your app except the factories, making it easier to refactor etc. Do this for all your classes.
A little sketchy but I hope you get idea. Is this complete overkill? Is there a down side to this? Does anyone do anything like this?
Cheers
MattAlthough the pattern you describes adds flexibility, it also adds complexety.
Imagine somebody is looking at your code and from what he sees he deducts that the next thing to look at is the concrete class which is used at a given place.
If you used an interface, he must find out which implementing class is actually used at this place. It's not a big thing, but if every single class has its seperate interface and factory I would consider it overkill ... after all you have to write all the boring code for this.
In the case of doubt I'd agree it's better to throw in an interface and a factory instead of refactoring thousand lines of codes afterwards. But if nothing hints toward a second implementation of the interface, or another reason for using an interface don't bother to write one.
As a general rule I use something like: Don't use a general rule. ;-)
Spieler -
Roll Your Own - APEX 4.0 and JQuery-UI Application
For those with a apex.oracle.com account and want to see jQeury tabs running via 4.0 in your own Workspace, use following this script to create your own version of Shijesh's (Apex_Noob) application.
Credit also goes out to Alistair Laing for his hard work in investigating why 4.0 is requiring the use of the googleapis jquery.js... libraries.
Application Builder - Create
Application Type - Database
Create Application - From Scratch
Name - jQuery Application
Add Page - keep default and Click Add Page
Click CreateMy application defaulted to Theme 2, you will need to switch the theme to one of the following: If you don't the tabs will not render properly.
8 Orange
10 Sand
13 Classic Blue
14 Simple Green
15 Light Blue
16 Dark Blue
18 Simple Gray
19 Red Gray
Message - Application created successfully.
Click Shared ComponentsUnder User Interface Click - ThemesIf you don't see one of the above Themes, you will need to Create and switch your Theme.
Click - CreateFrom the Repository selected Click - Next and select one of the above Themes
Click - Switch ThemeSelect one of the above Themes and Click - Next
Click -NextClick - Switch ThemeReturn to your newly created Application by Clicking on Application xxxxxxx Breadcrumb
Click - Create PageSelect - Blank PageClick - NextAssign the page a name
Click - NextAccept defaults and Click - NextClick - FinishClick - Edit PageI still work in Component View, to toggle to this View, click on the control adjacent to Page number and Go button. Hover over the ones on the far right and you will see both Component View and Tree View
From Component View
Click on the Page Edit Control
In the Text Area labeled Javascript/Execute when Page Loads - paste in the following code:
$x("tabs").appendChild( $x("tabs-1"));
$x("tabs").appendChild( $x("tabs-2"));
jQuery("#tabs").tabs();In the Text Area labeled HTML Header and Body Attribute/HTML Header - paste in the following code:
<link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css" type="text/css" />
<script src= "http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/jquery-ui.js"> </script>Click - Apply ChangesRequired use of the Google jqueryui libraries is being questioned by recent threads created by Alistair Laing since it appears that 4.0 does not currently support jQeury tabs
{thread:id=1083507}
{thread:id=1083540}
Create a Region
Type HTML Text - accept defaults
Provide a Title like "Tabs" and accept defaults
Template - Reports Region
Sequence 10
Click - NextIn the Enter HTML Text Region Source: Text Area - paste in the following code:
<div id="tabs">
<ul>
<li><a href="#tabs-1">Employees</a></li>
<li><a href="#tabs-2">Departments</a></li>
</ul>
</div>Click - Create RegionCreate a second Region
Type Report/Sql Report
Provide a Title like "Employees" and accept defaults
Template Reports Region
Sequence 20
Click - NextIn the Enter SQL Query or PL/SQL function returning a SQL Query: Text Area - paste in the following code:
SELECT empno,
ename,
job,
mgr,
hiredate,
sal,
comm,
deptno
FROM empClick - Create RegionEdit the newly created Report Region
Under Attributes/Static ID - paste in the following code:
tabs-1Click - Apply ChangesCreate a third Region
Type Report/Sql Report
Provide a Title like "Departments" and accept defaults
Template Reports Region
Sequence 30
Click - NextIn the Enter SQL Query or PL/SQL function returning a SQL Query: Text Area - paste in the following code:
SELECT deptno,
dname,
loc
FROM deptClick - Create RegionEdit the newly created Report Region
Under Attributes/Static ID - paste in the following code:
tabs-2Click - Apply ChangesRun you page and you should see you tabs.
JeffGreat post Jeff,
With regard to Jquery UI and tabs I've contacted the Apex dev team and received a reply from them.
All the jQueryUI files are included in the APEX 4.0 distribution, but not all jQueryUI components
are loaded by default to avoid a huge initial download. It's not necessary to load your own version of jQueryUI, just load the missing component.
For the "Tabs" you have to add
<link href="IMAGE_PREFIX#libraries/jquery-ui/1.8/themes/base/jquery.ui.tabs.css" rel="stylesheet" type="text/css" />
<script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8/ui/minified/jquery.ui.tabs.min.js" type="text/javascript"></script>
to your page template or the header attribute of your page where you want to use it.They did not mention which other Jquery UI widgets were not included so people need to check to see if they get any JS errors Like "$('#tabs').tabs() is not a function" this would suggest that tabs is not being loaded. To included it in you page header directly after #HEAD# you need to place the css and js as stated above.
If you need jquery help just post you queries here or the is some other jquery links that maybe of some use
jQuery
http://jquery.com/ - Official jQuery Website
http://api.jquery.com/ - jQuery API Library
http://plugins.jquery.com/ - jQuery Plugins (Not APEX related)|
http://yayquery.com/ - yayQuery - jQuery Podcast
http://jqueryui.com/ - Official jQuery UI Website
http://jqueryui.com/demos/ - jQuery UI Demos
Edited by: Alistair Laing on Jun 9, 2010 4:04 PM
Add more links
Edited by: Alistair Laing on Jun 9, 2010 4:09 PM -
Error while importing swf file in to Crystal Xcelsius Designer 4.5
help me...., Error while importing swf file in to Crystal Xcelsius Designer 4.5
I read in the book called "CRYSTAL XCELSIUS for DUMMIES" on page 243 under topic called Nesting a Dashboard within another Dashboard.
sorry i used the wrong word embed, here i am importing the swf using image component.
My requirement is somethis like this parent child dependency menu.
eg: i have to two tabs 1)alphabets 2) Numerics First levet menu
if you click alphabets tab then the following menu A/B/C/D/..... Z i have diff charts.. under each alphabet.
If you click numberic tab then the follwing menu should one/two/three/.......ten here also i have diff charts under number
in over to avoid complexity in dynamic visibility i divided the into 3 dashboards. 1- alphabets 2- number and 3 -importing both swfs.. everything works fine except first tab and last tab under alphabets and numerics.
If some one help me with some alernative ... would be great.
Thanks
Maybe you are looking for
-
Errors, including ae.blitpipe
In the studio I work in, one or more artists get the following issue: When starting AFX an error is shown on screen: After Effects error: Crash in progress. Last logged message was:<11156> <ae.blitpipe><2> Making new context This is followed by a sec
-
I used mini display port to connect my macbook to my HD tv.. when i connected it worked perfectly with sound via the hdmi cable.. but when i changed the channel and than changed back the audio stoped working... now only video is working no audio.. my
-
Can't get onto iPad asking for passcode never set one up
I download ISO 7 yesterday and now can't get onto my iPad as it's asking for a passcode ...I haven't ever had a pass code or been asked.. Help?
-
DHCP - Cannot add text option for VOIP phones in OES Linux
While working through this, I solved the issue, but decided to post this anyway as it may help others to find these sorts of errors. I'm working on migrating from NetWare 6.5sp8 to OES11sp2. Client has Shoretel VOIP phones. Existing NetWare-based DHC
-
WHile I am able to get the INBOX of my Yahoo a/c, after opening the mail I am not finding the body of the msg. Everything else is there. What's the problem? How to avoid all the jazzy graphics when downloading say mai.yahoo.com as it takes too much o