Management Console Fails

When I open our Exchange 2010 Management Console I get the error below.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'lifedev03.devdomain.lifetimeinc.com'. Error: 'Active directory response: The LDAP server is unavailable.'"
Some background, we had a 2003 Exchange Server that was not being used and the sever was decommissioned.  Not sure how I can get AD to remove that 2003 server as it is too late to re-create it.  Any ideas?

Sorry, just reread your post and now understand that the ghost server is an Exchange server, not a DC.
If you have a machine with the Exchange 2003 System Manager installed, or can find a machine on which you can install it, that's the best way to remove the server.  Just navigate to it and delete it.
You can also use ADSI Edit.  Connect to the Configuration naming context.  Navigate to CN=Servers,CN=<Exchange 2003 administrative grou>,CN=Administrative Groups,CN=<organization name>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<domain>,DC=<com>,
select the server that no longer exists and delete the object and all its child objects.
The ESM method is the best because it'll help ensure that other dependent objects are removed, so I recommend trying to use that one.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

  • Exchange 2010 SP1 management console fail

    Exchange 2010 SP1 management console fail on local exchange servers.
    The following error occurred while attempting to connect to the specified Exchange server CAS123.domain.co.za
    The attempt to connect to
    http://cas123.domain.co.za/PowerShell using “kerberos” authentication failed: Connecting to remote server failed with following error message: The WS-Management service cannot process the request because IP address cas123.domain.co.za is invalid. For more
    information, see the about_Remote_Troubleshooting Help topic.
    However do note that the Exchange Management Shell also fails with the exact same error on both my CAS and Mailbox servers.
    Though I am still able to open both tools via my backup server.
    All ells works fine.
    nslookup resolves the exchange servers as they should be. Frankly I am stumped as to the invalid IP address.
    My exchange environment have been running problem free for years and this problem only occurred last week Thursday after some .NET updates.

    Hi,
    As per the information and details provided by you, the only thing that I can figure out is that: -
    You receive an error: Exchange 2010 SP1 management console fail.
    There are two methods to resolve this problem: -
    Method 1: -
    Close all MMC/EMC instances before proceeding.
    Open the Registry editor (regedit) as the user you run the EMC under.
    Go to
    HKEY_CURRENT_USER\SOFTWARE\Microsoft\ExchangeServer\v14\AdminTools
    Look for value, Node structure setting.
    If it is there, back it up and then remove it.
    Method 2: -
    Close all MMC/EMC instance before proceeding.
    Open powershell or powershell IDE as the user you run the EMC under and execute the following command:
    Remove-Item Property- Path
    HKCU:\Software\Microsoft\ExchangeServer\v14\AdminTools\ -Name NodeStructureSettings
    Close Powershell
    I hope this information will be helpful for you. Correct me if the information that I am having is wrong.
    Thanks and regards
    Ashish@V

  • Management console fails connecting to Management server.

    I have installed Oracle 9.2 on Red Hat Advanced Server V2.1.
    Also installed Management server and client software on the system.
    Started everything up: oemctl start oms, agentctl start agent, apachectl start...
    Run Manager Console on Linux machine (i.e. locally)
    Runs successfully - connecting stand-alone
    Runs successfully - connecting to management sever
    Installed client software on a Windows NT PC.
    Runs successfully - connecting stand-alone
    FAILS - connecting to Management server
    On another NT PC, try running web interface to Management server
    FAILS - Same error as when using thick client.
    Failure is the same in both cases: The exception (java.lang.NullPointerException) occured.
    Failure of both of these suggested a server issue...
    Don't know where to find management server logs?
    Looking at $ORACLE_HOME/Apache/Apache/logs/error_log seems unable to find files, e.g.:
    [Mon Nov 25 10:01:46 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/readme/emreadme.htm
    [Mon Nov 25 10:01:57 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/java/awt/KeyboardFocusManager.class
    [Mon Nov 25 10:02:11 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/oracle/ewt/alert/resource/AlertBundle_en
    _GB.class
    [Mon Nov 25 10:02:11 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/oracle/ewt/alert/resource/AlertBundle_en
    _GB.properties
    [Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/oracle/sysman/vt/console/app/ConsoleBean
    Info.class
    [Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/sun/beans/infos/ConsoleBeanInfo.class
    [Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
    1/app/oracle/product/9.2.0/oem_webstage/oracle/sysman/emSDK/client/appContainer/
    WebApplicationBeanInfo.class
    I have tried reinstalling Oracle website, however this made no difference.

    Can you ping the server which is running OEM from the client NT machine?
    Are you trying to connect using DNS or IP?
    Verify that this works first.

  • Installation of Management Console fails

    I'm trying to install the OpsMgr Management Console on our management server, but it fails:
    Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Console. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    All requirements, as stated
    here, are there. So I reboot the server and executed msiexec directly:
    msiexec /i Z:\Setup\AMD64\Console\OMConsole.msi OM_INSTALLDIR="
    C:\Program Files\Microsoft System Center 2012 R2\Operations Manager" SEND_CEIP_R
    EPORTS=0 MU_SETTING=0 /l*v c:\temp\msi.log
    When I open the verbose log I get some more detail but I still don't understand what is happening:
    Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.AddFullTrustForAssembly
    Exception thrown by custom action:
    System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NotSupportedException: This method explicitly uses CAS policy, which has been obsoleted by the .NET Framework. In order to enable CAS policy for compatibility reasons, please use the NetFx40_LegacySecurityPolicy configuration switch. Please see http://go.microsoft.com/fwlink/?LinkID=155570 for more information.
    at System.Security.SecurityManager.PolicyHierarchy()
    at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.GetPolicyLevel(String policyLevelName)
    at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.AddFullTrustForAssembly(Session session)
    --- End of inner exception stack trace ---
    at System.RuntimeMethodHandle.InvokeMethod(Object target, Object arguments, Signature sig, Boolean constructor)
    at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object parameters, Object arguments)
    at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
    at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
    CustomAction _AddCodeGroup.6C283D0A_50A8_439C_BDF9_0BA55C19F3FE returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (98:A4) [08:01:43:402]: NOTE: custom action _AddCodeGroup.6C283D0A_50A8_439C_BDF9_0BA55C19F3FE unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    Action ended 8:01:43: InstallFinalize. Return value 3.
    What is going on and why is the installation failing?

    I suggest uninstalling both .Net frameworks (3.5 & 4.5), reboot server and then install them back, if not 4.5, try installing 4.0 and try installing SCOM, hopefully this should work
    Else, as per your exception there seems some problem with CAS policy which was obsoleted by the .Net framework
    Exception has been thrown by the target of an invocation. ---> System.NotSupportedException:
    This method explicitly uses CAS policy, which has been obsoleted by the .NET Framework. In order to enable CAS policy for compatibility reasons, please use the NetFx40_LegacySecurityPolicy configuration switch
    plz refer below links and do let us know if this helped
    http://services.businessanalyze.com/community/node/169
    http://msdn.microsoft.com/en-us/library/ee191568(VS.100).aspx
    Faizan

  • Group Policy Management Console Failes to open when one Domain Controller is powered down

    Hi All,
    This was an accidental discovery, but here's my dilemma. I have a site with 2 domain controllers(Windows 2008 R2), and if I shut down my second domain controller, when I try to open the Group Policy Management  Console on the 1st domain controller,
    it fails to open and I get the following error, "The specified domain either does not exist or could not be contacted" with 3 options to "retry", "choose another domain controller", or remove.   If I go to chose another domain
    controller and select the 1st domain controller it still fails.  Unless the 2nd DC is turned on, I have no issues opening the GP management console. Not sure, why this is happening, I've done it in the pass without issue.
    Any help would be appreciated.
    Thanks

    Well it seems that some how the PDC emulator is set to be the 2nd DC instead of the 1st DC on the 1st DC which explains why the failure after the 2nd DC went down. Why or should I say how could the PDC get switched from the primary DC without human intervention.
    Does the PDC automatically switch for any reason?

  • Package Manager console failed to load

    Last night I installed update 3 for Visual Studio 2012 professional (version 11.0.60610.01).  This morning when I started the package manager console I received the following errors.  I did a repair of VS but other than taking a long time
    it did not fix anything.  I also installed all the extension updates, no help either.  The file mention below is where it should be and I can open it.  Tried running in administrator mode, again no help.  All three versions of power shell
    seem to run just fine (64, 86, ISE).  I am running Windows 8 on a 64 bit machine, all updates are installed.
    Any suggestions on how to fix this one?
    The following error occurred while loading the extended type data file: Microsoft.PowerShell.Core, C:\Windows\SysWOW64\WindowsPowerShell\v1.0\types.ps1xml(2977) : Error in type "System.Security.AccessControl.ObjectSecurity": Exception: The getter method should be public, non void, static, and have one parameter of type PSObject.
    The following error occurred while loading the extended type data file: Microsoft.PowerShell.Core, C:\Windows\SysWOW64\WindowsPowerShell\v1.0\types.ps1xml(2984) : Error in type "System.Security.AccessControl.ObjectSecurity": Exception: The getter method should be public, non void, static, and have one parameter of type PSObject.
    The following error occurred while loading the extended type data file: Microsoft.PowerShell.Core, C:\Windows\SysWOW64\WindowsPowerShell\v1.0\types.ps1xml(2991) : Error in type "System.Security.AccessControl.ObjectSecurity": Exception: The getter method should be public, non void, static, and have one parameter of type PSObject.
    The following error occurred while loading the extended type data file: Microsoft.PowerShell.Core, C:\Windows\SysWOW64\WindowsPowerShell\v1.0\types.ps1xml(2998) : Error in type "System.Security.AccessControl.ObjectSecurity": Exception: The getter method should be public, non void, static, and have one parameter of type PSObject.
    The following error occurred while loading the extended type data file: Microsoft.PowerShell.Core, C:\Windows\SysWOW64\WindowsPowerShell\v1.0\types.ps1xml(3005) : Error in type "System.Security.AccessControl.ObjectSecurity": Exception: The getter method should be public, non void, static, and have one parameter of type PSObject.
    The term 'Get-ExecutionPolicy' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    John J. Hughes II
    Ran Get-ExecutionPolicy from PowerShell (x86) it returns Restricted
    Also looking around... I have on add-in installed or running
    Also tried uninstalling nugget and reinstalling
    I noticed on the NuGet website it calls for PowerShell 2.0. It seems I have PowerShell 3.0, could that be a problem? Can I install PowerShell 2.0/3.0 side by side, is there an update to NuGet?

    Found the following link in stack overflow, added the suggested items to the VS exe config file and it works now without error.
    http://stackoverflow.com/questions/12638289/embedding-powershell-v2-0-in-net-app-on-windows-8-rtm
    Added the following to the devenv.exe.config file in the runtime section
    <dependentAssembly>
    <assemblyIdentity name="System.Management.Automation" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.PowerShell.Commands.Utility" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.PowerShell.ConsoleHost" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.PowerShell.Commands.Management" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.PowerShell.Security" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.PowerShell.Commands.Diagnostics" publicKeyToken="31bf3856ad364e35" />
    <publisherPolicy apply="no" />
    </dependentAssembly>
    John J. Hughes II

  • Exchange management console - fail to initialise - emt shooter contains unrecognised commands

    running on Windows SBS 2011:
    - possible due to tweaking system rights in order to get my backup working since the problem started after solving my backup issue in: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/d21be14c-de84-479c-951d-751f5d47e857/#1128cda3-0a0d-4859-96cb-30fb4eff121e
    I tried the EMTshooter, maybe its because I'm using sbs 2011 and not all script commands are recognised any more?see output underneath this:
    Sorry Microsoft, getting pretty fed up, troubleshooting days on end. Is Windows SBS2011 standard, open source? Don't think so. Bought 50 user license, bad user experience, debugging your stuff on my account, thank you.
    EMT shooter:
    PS D:\installaties\EMTshooter> C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -com "d:\EMTshooter\EMT
    shooter.ps1"
    Security Warning
    Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your
    computer. Do you want to run D:\EMTshooter\EMTshooter.ps1?
    [D] Do not run  [R] Run once  [S] Suspend  [?] Help (default is "D"): r
    Security Warning
    Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your
    computer. Do you want to run D:\EMTshooter\EMTConnectFunctions.ps1?
    [D] Do not run  [R] Run once  [S] Suspend  [?] Help (default is "D"):
    File D:\EMTshooter\EMTConnectFunctions.ps1 cannot be loaded because you have elected to not run this software now.
    At D:\EMTshooter\EMTshooter.ps1:175 char:2
    + . <<<<  $loadpath
        + CategoryInfo          : NotSpecified: (:) [], PSSecurityException
        + FullyQualifiedErrorId : RuntimeException
    Welcome to the Exchange Management Troubleshooter!
    We recommend that you run the troubleshooter after making changes to
    IIS to ensure that connectivity to Exchange Powershell is unaffected.
    The term 'logevent' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the sp
    elling of the name, or if a path was included, verify that the path is correct and try again.
    At D:\EMTshooter\EMTshooter.ps1:189 char:9
    + logevent <<<<  $eventID $MessageAndParams $Type
        + CategoryInfo          : ObjectNotFound: (logevent:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    Checking IIS Service...
    The term '_CheckServicesStarted' is not recognized as the name of a cmdlet, function, script file, or operable program.
     Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At D:\EMTshooter\EMTshooter.ps1:195 char:31
    + $noIIS = _CheckServicesStarted <<<<
        + CategoryInfo          : ObjectNotFound: (_CheckServicesStarted:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    The term 'resetWindow' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
     spelling of the name, or if a path was included, verify that the path is correct and try again.
    At D:\EMTshooter\EMTshooter.ps1:198 char:13
    +     resetWindow <<<<
        + CategoryInfo          : ObjectNotFound: (resetWindow:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS D:\installaties\EMTshooter>
    Regards, Chris.

    I recommend that you post your question to the SBS forum because wizards used in that product might best solve your problem.
    http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Root password fails on auth to Solaris Management Console Server

    I've setup Solaris 10 x86 on a VA linux 1220 server, all is good so far except when I try to create additional users. I am logged in as root, and the root password logs in to the CDE, but fails on authentication to Solaris Management Console Server when I try to use any of the management apps like computers and networks or Users. So I'm stalled at the point where I should be configuring the system. I have been very careful about typing in the password exactly as I use it in the login screen, but it never works in the System Management tools for This Computer. The password I'm using is 26 characters long, is it too long? Or is there a step I'm missing?
    Thanks,
    Brian

    One of my famous guesses, but unless you changed the default password algorithm the maximum length of your password is 8 characters, when logging in on the console or desktop, anything typed after those eight characters will be ignored (unless this behaviour changed very recently).
    Its possibly that SMC, and its server component WBEM does not ignore the extra characters, which could cause this behavior.
    What happens if you try and login to SMC with the root user and only the first eight characters of your password?
    Btw, if this was the problem i think there is a way to change the default crypto algorithm to something that supports more characters.
    .7/M.

  • Fail in loading Exchange Management Console

    Please help:After Opening the Exchange Management Console and Clicking on "Microsoft Exchange On-Premises" ,I encountered the following error:
    <The following error occurred when setting up Remote Powershell session to 'ServerName.MyDomain.net':
    Closing remote server shell instance failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about Remote Troubleshooting Help topic. >

    1. Remove the WinrmIIS Extension from "Programs and Features"
    2. Reboot the server
    3. Execute the cmd "winrm quickconfig". This adds an exception for the remote management in the Windows firewall.
    4. Install "Winrm IIS extension
    5. Try open Exchange Management Console
    Let me know what happens :)
    Thanks for your guide;
     "WinRM IIS Extension" is not installed.and firewall is off.
    When I open up the Exchange Management Console ,after these message : 
    <Initializing ...
    Setting up Remote Powershell session to: ServerName.MyDomain.net ...>
     I'm seeing these errors:
    <The following error occurred when setting up Remote Powershell session to 'ServerName.MyDomain.net':
    Closing remote server shell instance failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about Remote Troubleshooting Help topic. >
    also When I open up the Exchange Management Shell,After several hours the below message remain:
    <VERBOSE:Connecting to  ServerName.MyDomain.net >

  • Exchange 2010 Management Console Initialization failed

    Hi.
    I have a server running 2008R2 as a domain controller with Exchange 2010 aswell.
    This is a fairly new migration from a sbs2003 server, which went very well, in regards to exchange and AD.
    The management console has worked since the migration, but suddenly today it stopped working, with the following message (the message is actually from the management shell, which isn't working either.):
    [dc.domain.local] Connecting to remote server failed with the following error message : The WS-Management service cannot
    process the request. The system load quota of 1000 requests per 2 seconds has been exceeded. Send future requests at
    a slower rate or raise the system quota. The next request from this user will not be approved for at least 975630592 milliseconds.
    For more information, see the about_Remote_Troubleshooting Help topic.
    IIS is working, and listening on ports 80 and 443.
    All services are running. I have tride to restart IIS, Windows Remote Management, informationstore and system attendant, but still no luck.
    I hope you can help me figure this out.
    Anders

    I got it. I had to open IIS7 and create the Default Web Site, as I'd deleted it sometime ago.
    Once I did that, everything worked great! Frustrating the things we do that come back and kick us in the face for hours, months later....

  • Exchange Management Console couldn't start with Kerberos authentication failed

    When I was making changes to Client Access\owa settings, chaning from Basic authentication to Form authentication (upn name) then changed to Basic again. It was ok after changing to Form authentication but moment after changing back to Basic, I couldn't
    no longer access owa (blank page when one vertical line) and in Exchange Management Console, I got "Initialization failed" - The following error occured while attempting to connect to the specified Exchange server 'sgp-ex1.mydomain.com':
    The attempt to connect to http://sgp-ex1.mydomain.com/powershell using "Kerberos" authentication failed: Connecting to the remote server failed with the following error message: The WinRM client cannto process
    the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help topic.
    I tried the troubleshooting tool from Exchange team blog:
    http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx. It give 3 possible causes for this error: 1. WSMan module entry is missing from global module section of c:\Windows\System32\InetSrv\Config\ApplicationHost.config; 2. Kerbauth module shows
    up as Managed module or has been loaded in the Default Web Site Level; 3. The Path of the Powershell virtual directory has been modified.
    I checked carefully, all the 3 causes do not apply to my situation as WSman entry is in order, the Kerbauth is native and local and the path of Powershell virtual directory is correct.
    I find that in Application log, there are Event 2297 and 2307 dumped at the time of failure:
    The worker process for application pool 'MSExchangeSyncAppPool' encountered an error 'Confiugration file in not well-formed XML' trying to read configuration data from file '\\?\C:\inetpubl\temp\apppools\MSExchangeSyncAppPool\MSExchangeSyncAppPool.config',
    line number '2'. The data field contains the error code.
    Help is very much appreciated.
    Valuable skills are not learned, learned skills aren't valuable.

    Unfortunately, all the links you provided didn't help.
    The first link contains 3 methods:1 Removing WinRM feature and reinstalling. 2 Rename the web.config file in location C:\inetpub\wwwroot 3 Have you installed Microsoft Dynamics CRM 4. I?
    As my server is Windows 2008 R2, the first method does not apply. I couldn't find any web.config in c:\Inetpub\wwwroot. The web.config however is found in many times in .netframework and winsxs directories. The 3rd method doesn't apply as I don't have CRM.
    The 2nd link contains 3 possible causes. The first 2 are the same as the ones I mentioned in my initial post. I couldn't verify the last cause because when open Exchange Management Shell, I got this error: [sgp.ex1.mydomain.com] connecting to remote server
    failed with the following server failed with the following error message: The WinRM client cannot process the request, it cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalide. For more
    information, see the about_Remote_Troubleshooting Help topic.
    I do not think the user is not remote powershell enabled because the problem happened suddenly, while I was making changes to Authentication settings of OWA(default) in Client Access in Exchange Management Console. If the user account is not remote powershell
    enabled, then I couldn't event connect to EMC in the first place.
    The last link didn't help because I could open up modules under PowerShell virtual directory in IIS.
    I think since the event log is saying MSExchangeSyncAppPool.config and DefaultAppPool.config not well-formed XML, that might be a clue.
    In the event id 2307 this is the message:
    The worker process for application pool 'DefaultAppPool' encountered an error 'Configuration file is not well-formed XML
    ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\DefaultAppPool\DefaultAppPool.config', line number '2'.  The data field contains the error code.
    Valuable skills are not learned, learned skills aren't valuable.

  • Data is not getting displayed in Management Console.

    Hi Experts,
    I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
    I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking  "Who's Online" link under WebServer section of management console.
    Do I need to do some more settings for getting the records display in Management Console.
    Please Advice.
    Thanks & Regards,
    Rohit

    Hi Roberto,
    I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
    LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
    Please Advice.
    Thanks & Regards,
    Rohit

  • Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

    I'm trying to stop the Enterprise Manager Console by issuing the command:
    ${ORACLE_HOME}/bin/emctl stop dbconsole
    Unfortunately, the command fails to stop the EM Console. Here's the output I get:
    TZ set to US/Pacific
    Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
    Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
    http://<hostname>:5505/em/console/aboutApplication
    Stopping Oracle Enterprise Manager 10g Database Control ...
    --- Failed to shutdown DBConsole Gracefully ---
    failed.
    The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
    Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
    Has anyone else encountered the same condition? If so, what was the solution?
    Here's my operating environment:
    SuSE 9.1 (Kernel 2.6.5-7.108-default)
    Oracle 10g
    Thanks in advance for any help/insight.

    Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
    Sorry, no better clues,
    Toni

  • Installation problem with Enterprise Manager Console

    When i am installing 10G database installation was failed at configuring DBConsole. later from OUI(Oracle Universal Installer) i uninstalled Enterprise Manager Console. my Question was how to reinstall the Enterprise Manager Console alone?
    When i am trying to install from OUI. it is not allowing me to install Enterprise Mager Alone (stating Database is mandatory) .
    for more information on dbconsole failure you can refer following log file
    Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log.
    Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: DBSNMP
    Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: Embarq
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 1923985629
    Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
    Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:39 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:40 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
    WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: Embarq
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
    Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 agentHome: null isCentral: false
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
    Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_Embarq.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_Embarq.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to D:\oracle1\product\10.2.0\db_1\oui
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [D:\oracle1\product\10.2.0\db_1]
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle1\product\10.2.0\db_1
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file D:\oracle1\product\10.2.0\db_1\install\staticports.ini
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.PortManager getFreePorts
    CONFIG: D:\oracle1\product\10.2.0\db_1:H1B-6F175-9JVJ.GDNINDIA.COM:null:Embarq:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: AGENT_PORT_Embarq value: 3938
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBCONTROL_HTTP_PORT_Embarq value: 1158
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_Embarq.
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: JMS_PORT_Embarq value: 5540
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_Embarq.
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: RMI_PORT_Embarq value: 5520
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
    CONFIG: Ports assigned for SID: Embarq : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig invoke
    CONFIG: Successfully granted priviliges to dbsnmp.
    Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
    Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
    CONFIG: Unlocking dbsnmp and sysman
    Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
    CONFIG: Unlocked mgmt_view account
    Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig invoke
    CONFIG: Successfully unlocked relevant accounts
    Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
    Sep 27, 2007 3:22:49 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
    CONFIG: Finished executing emreposoutofbox.sql
    Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig updateEmomsProps
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties ...
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
    CONFIG: Copying OC4J config files from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
    CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\application.xml
    Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\data-sources.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\data-sources.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\global-web-application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\global-web-application.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\internal-settings.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\internal-settings.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\java2.policy to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\java2.policy
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn-data.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn-data.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\mime.types to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\mime.types
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\oc4j-connectors.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\oc4j-connectors.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\principals.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\principals.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\server.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
    CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\META-INF\MANIFEST.MF to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF\MANIFEST.MF
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
    CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\application-deployments\default\defaultWebApp\orion-web.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp\orion-web.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
    CONFIG: Finished copying OC4J config files
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateEmdProps
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
    Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getLocalListener
    CONFIG: Using specified listener name: LISTENER
    Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml ...
    Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
    CONFIG: Local host name: H1B-6F175-9JVJ.GDNINDIA.COM
    Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
    CONFIG: New Env List: [COMPUTERNAME=H1B-6F175-9JVJ, NEED_EXIT_CODE=1, ORACLE_SID=Embarq, PATH=D:\oracle1\product\10.2.0\db_1\jdk\jre\bin\server;D:\oracle1\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;d:\data\notes;c:\program files\notes, SystemRoot=C:\WINDOWS, TZ=, WINDIR=C:\WINDOWS]
    Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Starting execution: CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Exit value of 0
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Execution of CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Creating shared install...
    Source location: D:\oracle1\product\10.2.0\db_1
    Destination (shared install) : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
    DeployMode : dbconsole
    Creating directories...
    Setting console properties ...
    Setting log and trace files locations for Console ...
    Setting log and trace files locations for Agent ...
    Service "OracleDBConsoleEmbarq" create SUCCESS
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
    CONFIG: New Env List: [LD_LIBRARY_PATH=D:\oracle1\product\10.2.0\db_1\lib32;D:\oracle1\product\10.2.0\db_1\lib;D:\oracle1\product\10.2.0\db_1\perl\lib;null, PERL5LIB=D:\oracle1\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle1\product\10.2.0\db_1\bin;]
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Starting execution: D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Exit value of 0
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Execution of D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
    CONFIG: Creating targets.xml in state directories...
    Source location: D:/oracle1/product/10.2.0/db_1
    Destination : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
    Creating directories...
    Creating targets.xml...
    Done.
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
    CONFIG: Successfully deployed state dirs for H1B-6F175-9JVJ.GDNINDIA.COM
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig performConfiguration
    CONFIG: Successfully updated agent config files
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: Writing the selected ports to portlist.ini
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: Writing the selected ports to portlist.ini
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
    CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.DBControlUtil startOMS
    INFO: Starting Database Control (this may take a while) ...
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: cmdType: 0
    Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Starting Windows service...OracleDBConsoleEmbarq
    Sep 27, 2007 3:23:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:23:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:23:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:23:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:23:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:24:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:25:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:26:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:27:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:28:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
    Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error starting Database Control
    Refer to the log file at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details.
    Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
         at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
         at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
         at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
         at java.lang.Thread.run(Thread.java:534)

    There is a log file referred at Refer to the log file at "D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details."
    Check the contents of this file.
    Out from the log you posted I can see it is a windows platform. One common issue with windows and EM is the lack of a fixed IP Address. If this is the case configure a loopback adapter.
    In the mean time, you don't need to have checked the configure EM DB Control from install time, you can skip this configuration and perform it later, so at least you have a working database just to start.
    ~ Madrid

  • Getting error while opening Sun access manager console

    We are facing problem while accessing console of Sun Access Manager. We got No Page Found error whenever we try to access the Sun Access Manager console. We have tried restarting the directory server and web server but even that doesn�t help us. Following are the error that gets recorded in log files:-
    ERROR: AuthD init() com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
    ERROR: Error creating service session java.lang.NullPointerException

    The ns-slapd.exe process belongs to the Directory Server. You should therefore check if your DS instance is set up properly.
    Michael

Maybe you are looking for

  • Insert webpages in to Word Doc.

    There must be an easy way to copy a complete webpage from DreamWeaver into a Word Document - but I can't find it. I want to send someone who knows very little about computers an idea of what my website looks like but have not come up with a perfect s

  • Cisco ECDS & SNS "internal and external"

    Hello I need an urgent help please , i have Cisco ECDS solution which will be integrates with Cisco SNS. I have two Cisco SNS (one will be internal and other will be for external).Based on the design and Cisco documents , i will have Cisco ECDS solua

  • 'Preview' app not supported on this type of Mac

    When I'm trying to launch the 'Preview' app (either from Launchpad, or by clicking any image/pdf file twice), the following message appears: You can't open the application "Preview" because it is not supported on this type of Mac. The last time it wo

  • Web Dynpro metadata API

    Hi, I'm currently working with web dynpro for java metadata api to create a simple web dynpro application consisting of one component defining a model, component controller and a view. I found an example how to create controllers and views, but I don

  • The data Form is invalid. Check log for details.

    Hi All, I am getting the following error, when I try to open a form. The data form 1. Current Year Forecast Input Form is invalid. Check log for details. Could you please let us know the path of the log file. Thanks & Regards, Sravan Kumar.