Management on 4507R+E with dual SUP7L-E setup

Hello,
I help manage the devices at the company I work for.  We bought and setup two 4507s, per the title, about a year ago.  I notice that when the first card fails over (testing, not actual failure) I cannot get management from the 'Fa1' port that is on the 2nd SUP (4th slot).  I have read some things saying to go into ROMMON for each card and set the IP for the interface that way, but this did nothing.  I think it may have to do with licensing, as we only use 'lanbase', which is also why we cannot run it in SSO mode.  Does anyone have any ideas as to the trick to get a single management IP to work on both SUPs?
Info:
System image file is "bootflash:cat4500e-universalk9.SPA.03.05.01.E.152-1.E1.bin"
License Information for 'WS-X45-SUP7L-E'
    License Level: lanbase   Type: Permanent
    Next reboot license Level: lanbase
cisco WS-C4507R+E (MPC8572) processor (revision 6) with 2097152K bytes of physical memory.
Processor board ID FXS1740Q0DK
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from Reload
2 Virtual Ethernet interfaces
248 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

I still have not found anything on this matter. Anyone?

Similar Messages

  • Use of business partner functionality in combination with dual control

    Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
    So is there a way to make this work or a procedure to do this?
    Niels Vanwingh

    Thanks Masa,
    I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
    Let me explain the requirement and scenario here in SRM 7.
    We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
    Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
    Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
    Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
    Is there any way we can achieve this?
    In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
    Regards
    Sandeep

  • New IMac 27"with dual internal hard drives

    How do I manage Data on my new IMac 27"with dual internal hard drives?  I have just migrated my data to my new computer.  Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog.  My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps.  Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue.  Can Anyone help me?

    Install OS X on the SSD:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
          the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
            Data option to one-pass. Click on the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
    Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

  • H67MA-E45 doesn't start with dual memory channel

    I have just bought an H67MA-E45 motherboard and a brand  new intel i5-2300 processor.
    The pc works fine with a DDR3 1333 memory module on slot DIMM1 (as suggested in the manual),
    but does not seem to work with dual memory channel at all.
    When I install two same memory modules on DIMM1 and DIMM3 (dual channel configuration), I get the following problem: When I power on the computer, it turns on and instantly turns off. Then it powers on again on its own, but does nothing else. I get no beep error codes and the display doesn't show anything.
    I use he on-board display adapter and I have only a sata II hard disk connected, nothing else.
    Any suggestion what the problem might be?
    Is there a way to check if there is a problem with the second memory channel?
    PC details
    Intel(R) Core(TM) I5-2300 CPU@280 GHz
    MSI H67MA-E45 (ms-7678, Lga1155),  Click BIOS, E7678IMS V1.2
    KINGSTON KVR1333D3N9K2/4G DDR3 4GB (2X2GB) PC10666 1333MHZ
    Intel HD Graphics (on board display adapter)
    Seagate Baracuda 7200.9 ST3160811AS 160 GB SATA 2.0
    Windows 7 Ultimate 32 bit
    FSP AX500-A Blue Storm, +3.3V~30 A  +5~28A  +12~15A

    My computer is now working only on one channel memory.
    Every time I power the computer on, I get three short beeps, the third one is of slightly different tone. However, the manual does not have the beep codes written down, nor can I find them somewhere for the EFI BIOS (E7678IMS V1.2). Is there any link for the beep codes?
    I tried mounting a single memory slot (KINGSTON KVR1333D3N9K2/2G DDR3 (1X2GB) PC10666 1333MHZ ) on DIMM 3 slot, for the second channel to work on its own. When I powered the computer on, I got the same problem, as if both slots DIMM 1 and DIMM 3 were populated. The mainboard turned on (without any beep code or display on screen) only to instantly turn off. Every while (about every four seconds) it tries to power on again on its own, without any intervention, but instantly turn off again. It may manage to stay turned on at one of the following iterations, without giving any beep code, displaying or loading anything.

  • Gnome Crashes on Login after messing with dual monitor settings

    Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
    Here's my xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 285.05.09  ([email protected])  Fri Sep 23 19:18:19 PDT 2011
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Unknown"
        HorizSync       28.0 - 33.0
        VertRefresh     43.0 - 72.0
        Option         "DPMS"
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
       #Option         "TwinView" "True"
       #Option         "MetaModes" "nvidia-auto-select, nvidia-auto-select"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
      #Option         "TwinView" "True"
       #Option         "MetaModes" "nvidia-auto-select, nvidia-auto-select"
    Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
    I installed awesome around the same time as configuring the dual monitor setup.
    Thanks.

    Update.
    The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
    I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
    Is there a way to just reset the Gnome settings?

  • Installing CCM on DL 380 G3/G2 with dual PIII or Dual Xeon

    Hi NetPros,
    I am planning to buy and install CCM 4.X or higher version on HP/Compaq DL 380 or DL 320. when i looked at the Cisco Approved Hardware requirements sheet i found the model that i am planning to buy... with dual PIII or dual Xeon on DL 380 G3. The Cisco document says
    "DL380-G2 is a robust server solution designed for Cisco Unified Communications software
    applications. Up to 7500 IP phones can be supported on a single server running Cisco
    CallManager 3.3 or later. The required processors are dual Intel Pentium III 1.4-GHz processors. No specific memory configuration is required as long as 2 GB of memory is achieved".
    Just wanted to make sure with NetPro's before buying the server that i am able to install and practice myself on CCM 4.X or higher versions.
    Also, wondering.. Is DL 360 is also on the approved list ??? and is it possible to install CCM on it
    Thanks in advance....

    here you have the HW compatibility matrix
    Supported Cisco Unified Communications Manager Releases by Server
    http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
    make sure the server meets the EXACT specs from
    www.cisco.com/go/swonly
    if the parts numbers are not a perfect match it won't do
    HTH
    java
    if this helps, please rate

  • ADF mobile: how to create graph with dual Y axis?

    Hi,
    Jdev 11.1.2.3.0 + mobile extension.
    I try to figure out how to create a dvtm:comboGraph with dual Y axis but without success.
    All series are rendered on the Y1 axis. Y2 axis even does not appear in the graph.
    here my code:
        <dvtm:comboChart var="row" value="#{bindings.lmrgGraph1.collectionModel}"
                         id="cc1" timeAxisType="enabled">
          <amx:facet name="dataStamp">
            <chartDataItem group="#{row.timeStamp}" value="#{row.acetat}"
                           series="#{lmrgGraphBundle.ACETAT}">
              <!--dvtm:referenceObject color="ff0000" displayInLegend="on"
                                    lineValue="#{bindings.graphTresholdAcetat.inputValue}"
                                    lineWidth="2"/-->
            </chartDataItem>
            <chartDataItem group="#{row.timeStamp}" value="#{row.plannedMachines}"
                           series="#{lmrgGraphBundle.BMPLAN}"/>
            <chartDataItem group="#{row.timeStamp}" value="#{row.actualMachines}"
                           series="#{lmrgGraphBundle.BMACTUAL}"/>
          </amx:facet>
          <dvtm:legend position="end" id="l1">
            <dvtm:legendSection id="ls1" title="Legend"/>
          </dvtm:legend>
          <dvtm:yAxis axisMaxValue="#{bindings.maxYAxisValueAcetat.inputValue}"
                      title="#{lmrgGraphBundle.MENGE}">
            <dvtm:majorTick/>
          </dvtm:yAxis>
                <!--dvtm:y2Axis majorIncrement="1.0"
                       title="#{lmrgGraphBundle.BETRIEBSMITTEL}"
                       axisMaxValue="#{bindings.maxYAxisValueMachines.inputValue}"-->
          <dvtm:y2Axis majorIncrement="1.0"
                       title="#{lmrgGraphBundle.BETRIEBSMITTEL}"
                       axisMaxValue="10">
            <dvtm:majorTick/>
          </dvtm:y2Axis>
          <amx:facet name="seriesStamp">
            <dvtm:seriesStyle assignedToY2="false" color="0052ff" lineWidth="2"
                              rendered="#{(row.series eq lmrgGraphBundle.ACETAT)}"
                              series="#{row.series}"/>
            <dvtm:seriesStyle assignedToY2="true" color="e7e700" lineWidth="10"
                              rendered="#{(row.series eq lmrgGraphBundle.BMPLAN)}"
                              type="bar" series="#{row.series}"/>
            <dvtm:seriesStyle assignedToY2="true" color="94f700" lineWidth="10"
                              rendered="#{(row.series eq lmrgGraphBundle.BMACTUAL)}"
                              type="bar" series="#{row.series}"/>
          </amx:facet>
        </dvtm:comboChart>kr
    Peter

    Hi Jan,
    meanwhile I have managed to display the second Y axix corret.
    Here my code:
                <dvtm:comboChart var="row"
                                 value="#{bindings.lmrgGraph.collectionModel}"
                                 id="cc1" animationOnDisplay="alphaFade"
                                 hideAndShowBehavior="withRescale"
                                 rolloverBehavior="dim" inlineStyle="height:50%;">
                    <amx:facet name="dataStamp">
                        <dvtm:chartDataItem group="#{row.timeStamp}"
                                            value="#{row.acetat}"
                                            series="#{bindings.lmrgGraph.hints.acetat.label}"/>
                        <dvtm:chartDataItem group="#{row.timeStamp}"
                                            value="#{row.plannedMachines}"
                                            series="#{bindings.lmrgGraph.hints.plannedMachines.label}"/>
                        <dvtm:chartDataItem group="#{row.timeStamp}"
                                            value="#{row.actualMachines}"
                                            series="#{bindings.lmrgGraph.hints.actualMachines.label}"/>
                    </amx:facet>
                    <amx:facet name="seriesStamp">
                        <dvtm:seriesStyle series="#{bindings.lmrgGraph.hints.acetat.label}"
                                          color="0052ff" type="line"/>
                        <dvtm:seriesStyle assignedToY2="true" color="e7e700"
                                          type="line"
                                          series="#{bindings.lmrgGraph.hints.plannedMachines.label}"/>
                        <dvtm:seriesStyle assignedToY2="true" color="94f700"
                                          type="line"
                                          series="#{bindings.lmrgGraph.hints.actualMachines.label}"/>
                    </amx:facet>
                    <dvtm:xAxis/>
                </dvtm:comboChart>
    /code]
    There are still some issues if x-axis is timestamp enables but I have already created an SR for this.
    regards
    Peter                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Trouble with Neo4 Platnum and AMD X2 with dual channel memory

    I just installed an X2 3800+ in my Neo4 Platnum board.  The board had a 3500 in it and ran fine.  When I installed the X2, the machine will no longer POST if the memory is in the dual channel mode.  I flashed to the latest BIOS (1.8) and it still does not work.  I am using 2 Corsair XMS 2-2-2-5 Dimms each at 512MB.  The PC POSTs fine if I place both modules in the Green slots.  It does not work with 1 in green and 1 in purple (with either Dimms1-2 or 3-4).  Has anyone else seen this?

    Todd,
    Your last post help me understand your situation a bit better.  Here are some questions for you:
    1- On your old system did these memory sticks work fine has a dual channel pair? Were these 2 memory sticks bought has a dual channel rated matched pair?
    2- In your own words give me your definition of POST?
    3- In your own words give me your exact detailed rendition of what happens when you try to post with dual setup. (How far do you get? Where does it hang up?)
    4- Can you access your BIOS if booting with only one memory stick? If so, this is only for testing purposes, set your memory as 2.5,3,3,8, and 2T and add 0.05 volts to both your CPU and memory recommended voltages. Save, exit, and then shut down your system. Re-install the second stick of RAM in a proper dual channel slot. Re-boot and see what happens. If successful posting and booting in dual channel with this BIOS config go back to your BIOS and tighten your board and memory timings one at a time until you ID the perfect BIOS config for your CPU and RAM. Do the same with your CPU & RAM voltages.
    AMD CPUs encompass their own memory control devices. There might just be enough variance between your older & newer AMD chips to reject dual configuration. If this is the case you may be able to correct it by using step for above. If this does not work, you sould borrow some suitable and proven dual channel memory sticks from a friend to see if the will work in your rig as dual channel?
    Just keep on trucking & you'll solve it

  • Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    try xxx - may work
    _may_ work.

  • BB Desktop Manager no longer works with Mac Maverick - Need Help Urgently

    I have been a loyal Blackberry user since the Government of Canada officially began using these cell phones. I feel, however, abandoned by Blackberry (they obviously don't believe that it is easier to retain an existing customer than acquire a new one). I'm using a Blackberry Bold (9900) with a Macbook Pro. Everything was fine until I upgraded my Mac operating system to Maverick; my Blackberry Desktop Manager no longer works, so I cannot sync the content (contacts, calendar) of my phone with my Mac, but that's not the worst of it.
    I recently had a momentary lapse and exceeded the 10 password attempts to access my phone... this accidentally wiped my phone clean... and because Desktop Manager does not work with Mac, I do not have a way to recover my data. Rogers was of no help and had Blackberry updated its desktop software months ago, as it should have, this issue would have been moot. I do not know how or why, but I was able to recover most of my data, but I'm not sure just how up-to-date tha data is and am still going through it, but I'm having issues with some functionality.
    I'm in the US for several months and have suspended my Canadian services. Prior to the wipe, I was able to use wifi on my phone to send and receive emails with no problem.  After the wipe, I can't send emails or bbms.  I checked my blackberry internet service and all email accounts are good to go. BBMs are another issue.  I need help.  Suggestions please. 

    Apple has ceased synchronization with Mavericks. The issue lies with Apple, not with the desktop software. To mitigate the lack of sync capabilities in Mavericks you can sync your contacts and calender on your Mac with the usual suspects (Yahoo, Google). Create a backup (archive) for Contacts and Calender on your Mac first, then create one of those email accouonts that allow syncing. On your 9900 and with BlackBerry provisioning enabled create the new or existing email account. See which email accounts can sync with BB, I know Yahoo is working fine. For Yahoo, get the Yahoo Calender sync (a few bucks one-off payment required), Contacts sync works off the shelf within BB. If you reset the 9900 you should be able to restore all data with BB DTM. Please note that emails you received during the 9900 reset and the date of restore will not be available on the device. You will still not be able to sync contacts/calender over BB DTM. I hope that helps.
    BlackBerry Bold 9900, Blackberry Z10 and BlackBerry PlayBook.

  • Dual-DMVPN Design with Dual Hubs on a single router ??

    Hi All,
    In DMVPN, in Dual-DMVPN Design with Dual Hubs , can a single router perform the role of dual hubs.
    The router has two different internet links. It is intended that when one link goes down, spokes shud connect to the same router onto the other active internet connection. Is this possible ?

    Since no one has answered yet, I'll give you the practical answer.
    You'll have issues with IPSec and static routing. "DMVPN" itself probably wouldn't have an issue, but it would depend on IPSec and routing to work.
    It is easier, by far, to put in a second router. And when you factor in your time to try to make it work (and it may not work), the second router is less expensive.
    Rob

  • "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    Do take a look out there. It is a third party applications so better check out Papers site.

  • How to Connect SQL Server enterprises Manager Version 8.0 with Form 6i

    Dear experts
    I want to know that How can I connect SQL server Enterprise Manager Version 8.0 with Forms/reprots 6i.
    currently I have oracle 9i database at server windows 2003 and I also connected with client (my PC) I work on server.
    I also have SQL server in that server 2003 machine and this SQL Server also work with other clients that have VB program.
    I want to know that can I connect with this SQL server with Form 6i?

    You can't. The closest thing would be to create links in an oracle database to the SQL Server database using Heteregeneous Services and connect forms to the that.
    This forum is for the SQLDeveloper tool. You will get more complete answers in the "Database General", or "Heterogeneous Services" forums

  • Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

    Can't get  windows 8.1 with  dual boot for fedora (linux) . system is UEFI .

    Hi,
    Any update here?
    We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
    In addition, please also check the information in the similar thread:
    Dual Boot Windows 8 and Linux?
    Best regards
    Michael Shao
    TechNet Community Support

  • Receiving multiple files with dual extension using file adapter

    Hi,
    The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters.  Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
    Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
    Thanks in Advance
    Manmadha

    Hi,
    Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
    Reference links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
    <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
    Regards,
    S.Santhosh Kumar

Maybe you are looking for