Management Services and Repository pending state?

I just rebuilt the repository for my EMGC(10.1.0) and everything is working fine except under unknown availability in the alert tab I have the entry "Management Services and Repository" - "Target is Temporarily in status pending state. Does anyone know what or how to get this out of the pending state? I shutdown EMGC and restarted it. I have rebooted the box, nothing seems to fix it, it has been this way for 4 days now.
thanks
Larry

4 days? tried metalink yet?
to get you started see note:
290856.1
If that doesn't help or you can't get anything else out of metalink, post again...

Similar Messages

  • Error in Grid Control: Setup - Management Services and Repository - error

    Hi, sometimes , in our grid control, we could see in
    Setup -> Management Services and Repository -> errors, the following error
    OMS failover: Error in OMS status collection. ORA-20233: Invalid Target=Management Services and Repository or Metric=Management_Servlet_Status (validate_target_metric)
    How can I correct this ?
    We are in 10.2.0.5 ( with 3 management servers )
    thanks for your help
    regards,

    See the metalink note 388280.1,4487966 for solution.
    Hope this helps,
    Regards
    Click here to [ Restore and recover OCR|http://www.oracleracexpert.com/2009/08/restore-and-recover-ocr-from-backup.html]
    Click here to [Replace and repair OCR|http://www.oracleracexpert.com/2009/09/how-to-move-or-replace-and-repair-ocr.html]
    Click here to [Backup and Recover VOTE|http://www.oracleracexpert.com/2009/08/voting-disk-backup-and-recovery.htmll]
    http://www.oracleracexpert.com

  • Setting Users for my managed services and application pools

    I setup my SharePoint 2013 test environment and I developed an intranet site. Now inside my test environment I set all the application pool & managed services to use Farm user account for simplicity. Now I want to setup my UAT environment and I want
    to follow the best practice for managing users and service accounts.
    I have read the “Core Solutions Of MS SharePoint 2013” book, and it have listed the following table:-
    First question. What is the difference when saying that the user “Must be a member of the Farm Administrators group” Or must be “Domain user account”?
    Second question , when I first install SharePoint 2013 a lot of applications pools and managed services such as excel services , access services, Performance Point Service Application, business
    data connectivity and Machine Translation Service  will be automatically created , so which account they will be using and should I define separate accounts for each managed service ?
    Third question. What is the recommendation for SharePoint 2013 regarding service accounts?, to use separate account for each manage service, for example one user for excel services , second user
    for access services ,etc?
    Fourth question. For example the documentation mentioned that the Required roles for the excel services is “Domain user account.”, but what permissions this domain user need to have ?
    thanks for any help, and sorry so adding multiple questions inside the same post.

    Q #1: This means the user must be part of the Farm Admins group. Every user is a Domain User.
    Q #2: Generally those should be using a single Domain User account in a single Application Pool to minimize memory usage and reduce unnecessary complexity.
    Q #3: The less Application Pools the better. E.g. One account/App Pool for all Web Applications, one account/App Pool for all Service Applications, and then Central Administration is obviously separate.
    Q #4: You don't need to specifically give this type of user any sort of rights
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Does EM 12.1.0.3 support Oracle DB 12c as managed target and repository database?

    Oracle released EM cloud control 12.1.0.3 last week.  The certification matrix on My Oracle Support does not list Oracle database 12c as a supported managed target or repository database.  Is the cert matrix wrong, or does Oracle have no version of cloud control that supports the 12c database?
    Thanks

    Oracle database 12c is supported as a managed target - but not as repository. MOS is being updated to reflect this shortly.

  • Capital Management Services

    I lost my job back in 2011 and was not able to pay some of my cards and 3 went into collections: 1. Capital one (limit 1200) with Portfolio Recovery Services2. Orchard (HSBC $300) with Portfolio Recovery Services3. Citi ($6800 with Capital Management Services) I could not get pay for delete with any of them, so I went ahead and paid almost the full amount with PRS and settled for around $3000 with Capital Management Services and paid it in 3 installments. The last one was June 1st and the credit reports have been updated yesterday. The card still doesn't report 0 balance, but reports balance minus 3 payments. I received the letter from CMS stating that I paid the settlement. I really need to have zero balance showing because I want to start rebuilding my credit. Right now, my FICO scores are around 550 and I am hoping to raise them to around 650 at least within the next 1 year. What should I do? Order all the reports and dispute? Contact CMS?

    floweryu wrote:
    I lost my job back in 2011 and was not able to pay some of my cards and 3 went into collections: 1. Capital one (limit 1200) with Portfolio Recovery Services2. Orchard (HSBC $300) with Portfolio Recovery Services3. Citi ($6800 with Capital Management Services) I could not get pay for delete with any of them, so I went ahead and paid almost the full amount with PRS and settled for around $3000 with Capital Management Services and paid it in 3 installments. The last one was June 1st and the credit reports have been updated yesterday. The card still doesn't report 0 balance, but reports balance minus 3 payments. I received the letter from CMS stating that I paid the settlement. I really need to have zero balance showing because I want to start rebuilding my credit. Right now, my FICO scores are around 550 and I am hoping to raise them to around 650 at least within the next 1 year. What should I do? Order all the reports and dispute? Contact CMS?They typically update first to the remaining balance and then update to 0 balance, they have to report 0 balance even if they settle for less. Allow 60 days for it to complete

  • [SOLVED] systemd display-manager.service problem

    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    Last edited by nierro (2012-07-15 17:13:42)

    nierro wrote:
    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    There has been a change regarding display managers. up until now they were WantedBy graphical.target, which was kind of stupid because this allowed you to enable multiple display managers.
    Instead graphical.target now Wants display-manager.service and all display managers are supposed to install the appropriate Alias. Afaik all display manager service files have been updated ragarding this and a "systemctl reenable slim.service" should fix it.

  • WS-Management service MaxEnvelopeSize quota

    Hi there!
    We ran this command ni powershell on exchange 2010 SP3:
    Get-Mailbox | Set-Mailbox –ArchiveQuota 10GB -ArchiveWarningQuota 9GB
    We recieve error:
    Sending data to a remote command failed with the following error message: The WinRM client sent a request to the remote
     WS-Management service and was notified that the request size exceeded the configured MaxEnvelopeSize quota. For more i
    nformation, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OperationStopped: (System.Manageme...pressionSyncJob:PSInvokeExpressionSyncJob) [], PSRe
       motingTransportException
        + FullyQualifiedErrorId : JobFailure
        + PSComputerName        : server
    Invoke-Command : Cannot write input as there are no more running pipelines
    At C:\Users\administrator\AppData\Roaming\Microsoft\Exchange\RemotePowerShell\server\server
    .psm1:50244 char:29
    +             $scriptCmd = { & <<<<  $script:InvokeCommand `
        + CategoryInfo          : InvalidOperation: (:) [Invoke-Command], PSInvalidOperationException
        + FullyQualifiedErrorId : NoMoreInputWrite,Microsoft.PowerShell.Commands.InvokeCommandCommand
    Then we have opened command prompt as administrator and ran:
    winrm set winrm/config @{MaxEnvelopeSizekb="5000"}
    and rerun the powershell command, but the error is the same...
    please help
    bostjanc

    Hi,
    Usually, we configure archive quotas for a personal (On-Premises) Archive.
    Please refer to this article for more information:
    http://technet.microsoft.com/en-us/library/ee633489(v=exchg.141).aspx
    Similar thread:
    http://social.technet.microsoft.com/Forums/exchange/en-US/32221af0-0355-4385-b3fe-915bf7c41984/winrm-error-after-upgrading-to-wmf-30?forum=exchangesvrunifiedmessaginglegacy
    If this issue still exists, please let me know.
    Best Regards.

  • Oracle Bpel + Content management services

    Hello,
    is there any tutorial that explain how to work with content management services and bpel together, in order to build a process that manage documents?
    thanks Nicolas Fonnegra

    Just published today .. :-)
    http://www.oracle.com/technology/products/ias/portal/pdf/portal_cmef_bpel_integration_technote.pdf
    /clemens

  • In cluster Manager there are no services and application listed on a node.. what does this mean?

    In Cluster Manager I can see two nodes listed.
    When I click on the first it lists the two SQL Server instances.
    On the other node there are no services and application listed....what does this mean?
    Mr Shaw

    Yes Instance A and Instance B will also be installed in the second node.
    Just go to configuration manager in the other node, you will see those instances in stopped state.
    Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
    the same instance.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
    Oh I get you.. 
    The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
    Thanks,
    Ben
    Mr Shaw

  • Operations Manager Failed to Access the Windows Event Log and management server is showing warning state

    Hi,
    I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
    again and again i.e.  Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
    The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
    The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
    Most recent error details: The RPC server is unavailable.
    Please suggest me how to resolve this so that my management server will again come back in healthy state.
    Thanks
    Abhishek

    Hi Abhishek,
    As i mentioned earlier the Alert resolution says the same points.
    Can you give details on the below ?
    Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
    Did you recently configure any new alert where you mentioned "Dhcpadminevents"
    as a event log location ?
    If yes then what is the target you selected for the rule / monitor there ?
    Can you post the results for analysis ?
    Gautam.75801

  • Solution Manager Service Desk - Segregation and Customization of HR Tickets

    All -
    The Solution Manager Service Desk is a great tool for incident management in a system landscape that includes SAP, as well as other technologies.
    I wanted to find out whether tickets that contain sensitive information (HR-related) can be segregated and "hidden" from support team members that are not supporting any HR functions.
    Also, is there a way, assuming tickets can be segregated by function or support team, that the email message users receive upon the creation of the ticket can be custom tailored?
    Thank you in advance!
    Scott Watson

    Hi Scott,
    Yes it is possible and there are various ways to achieve it
    for e.g you can use the security concept below to hide from non relevant team members using
    authorization object CRM_ORD_LP
    check this link
    http://wiki.sdn.sap.com/wiki/display/SMAUTH/CRM_ORD_LP
    also this one
    http://wiki.sdn.sap.com/wiki/display/SMAUTH/UC00035
    hope this resolves issue
    Regards
    Prakhar

  • HT4796 When I run migration assistant on my PC, I get a message saying windows mail is running and won't let me proceed.  Windows Mail is not running. I checked Task Manager's applications, services and processes and found no references to Window's Mail.

    Got a new iMac 27" for Christmas (well a little after) and tried using Migration Assistant to transfer some files.  I can't get past a window on the PC that pops up indicating Quit Other Programs  Before you can transfer your information, the following programs must be shutdown:  Windows Mail  Close these programs and run Migration Assistant again.  If these programs do not appear to be running, restart your computer and try again.
    I've rebooted.  I've searched Task Manager - Applications, Processes and Services and there are no references to WMail.  I don't or haven't knowingly used Windows Mail and Outlook isn't even installed on my PC.  Does anybody know how to get around this without using external drives, USB flashdrives, etc.

    Lots of fun.... The superdrive in my Macbook seems to have gone off kilter since my install. Now the CD-R won't work regardless of which operating system I use. Normal CD's and DVD's are fine, but any CD-R is taken as a blank disk.
    Using an external CD drive solved this problem.

  • Services in SAP management console and related window services and process

    hai
    can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
    thanks in advance.
    Naga Laxmi

    Hi Naga,
    Please refer to this article for the processes relevant to the Java Instance:
    http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
    Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
    You can easily find the relevant services by their SAP prefix.
    Hope this helps.
    Best Regards
    Vyara

  • SAP Management Console and Services

    Good morning everyone,
    I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
    First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
    At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
    SAPOsCol, SAPPRD_00 & SAPPRD_01
    SAPCCMSR.01 & SAPCCMSR.11 are set to manual
    Has anyone got an explanation on why different info are displayed in both console?
    Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
    Finally,
    In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
    Thank you
    Corinne

    Corinne,
    The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
    SAPCCMSR.01 & SAPCCMSR.11 are set to manual --  These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
    SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
    Hope this helps!
    Reward points if useful!!!
    Cheers!
    Bidwan

  • Workflow Manager service in Error state after Dec14 CU install

    After installing Dec 14 CU and updating the WF farm to CU2 I tried to run the cmdlets as per here -
    https://technet.microsoft.com/en-us/library/dn133867.aspx?f=255&MSPPError=-2147217396
    $credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
    $site = Get-SPSite https://teams.sharepoint.com
    $proxy = Get-SPWorkflowServiceApplicationProxy
    $svcAddress = $proxy.GetWorkflowServiceAddress($site)
    Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
    This errors:
    Copy-SPActivitiesToWorkflowService : An internal error occured. For more details, please see the server logs. Client
    ActivityId : cb2a40af-2c50-4e5c-8ac2-c5436c351b89.
    At line:1 char:1
    + Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credenti ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidData: (Microsoft.Share...WorkflowService:CopySPActivitiesToWorkflowService) [Copy
       -SPActivitiesToWorkflowService], InternalServerException
        + FullyQualifiedErrorId : Microsoft.SharePoint.WorkflowServices.PowerShell.CopySPActivitiesToWorkflowService
    I then ran get-WFFarmstatus on the WF server (3 in the farm) and see that the service is stopped on all the WF servers with a warning:
    WFserver1      WorkflowServiceBackend                                                 
    Stopped
    WARNING: Endpoint https://WFserver1:12290/ is not responding: The remote server returned anerror: (500) Internal Server Error.
    WFserver1      WorkflowServiceFrontEnd                                                
    Stopped
    Checked the underlying services and IIS on the 3 WF servers and these are all now started but the WF service cannot be started:
    net start WorkflowServiceBackend
    The Workflow Manager Backend service is starting.
    The Workflow Manager Backend service could not be started.
    A system error has occurred.
    System error 1067 has occurred.
    The process terminated unexpectedly.
    The WF operational logs show this:
    Unhandled exception in AppDomain:
    Microsoft.Workflow.Common.FatalException: An unrecoverable error occurred. For
    diagnostic purposes, this English message is associated with the failure: 'A
    required Workflow Manager configuration
    'WorkflowServiceScopeSnapshotProcessBatchSize' is not present. Please add this
    configuration value.'. ---> System.IO.InvalidDataException: A required
    Workflow Manager configuration 'WorkflowServiceScopeSnapshotProcessBatchSize'
    is not present. Please add this configuration value. <o:p></o:p>
    at
    Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) <o:p></o:p>
    at
    Microsoft.Workflow.Service.WorkflowServiceBackendHost.OnStartCompleted(IAsyncResult
    result) <o:p></o:p>
    There is a suggested fix for this here -
    http://www.guideushow.com/sharepoint/solved-workflowservicescopesnapshotprocessbatchsize-is-not-present/
    (http://www.guideushow.com/sharepoint/solved-workflowservicescopesnapshotprocessbatchsize-is-not-present/)
    <o:p></o:p>
    I’d like to at least get some feedback as to whether this is safe/supported (MS doesn’t like
    any tinkering with the DBs…) – or whether we should go down the uninstall/reinstall
    the Workflow farm route  - thanks
    J

    Hi,
    For your issue, try to provid EXECUTE permission for role "WFServiceOperators".
    Add Workflow service account as “WFServiceOperators” into the database. Here are the steps to apply permissions:
    Open the Query Window and Select the database “WFInstanceManagementDB”
    Write the following line of script:
    GRANT EXECUTE TO WFServiceoperators
    Hit Execute.
    Repeat the steps for database “WFResourceManagementDB”
    Here are similar issue posts, you can use as a reference:
    https://social.msdn.microsoft.com/Forums/office/en-US/351b72e1-1664-43c5-8c2b-ffb307bef38e/cant-access-workflow-status-page-after-workflow-manager-cu2?forum=sharepointadmin
    https://social.msdn.microsoft.com/forums/azure/en-US/054d2a58-8847-4a6a-b1ab-05a79f49fe65/workflow-manager-cumulative-update-february-error?forum=wflmgr
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for