Manager field in AD is not populating

Hi guys,
I have installed AD connector in OIM 11gR2 and provisioning is working fine.
But the manager field is not getting populated.
Please let me know how to populate manager field also in AD.

Please check how are you populating manager field in the process form.
Are you populating manager field as just the login-id of the manager? Make sure manager field is matching manager's distinguished name in active directory.
i.e, you need to populate manager field like cn=manager1,dc=example,dc=com
Please check.

Similar Messages

Field Profit Center is not populated while posting through T-Code F-02

Dear Sir / Madam,
While posting through T-code F-02 the field Profit center is in hidden mode
as a result I am getting the given below error.
"GLT2201 - Balancing field profit center in line item 001 not filled"
Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
I tried searching the same but could not find the solution.
Regards
Chirag Shah

Dear expert
Check following steps...
1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
2. Make sure Cost Center exists in the Asset Master..
3. Make sure profit center is entered into Cost Center master.
4.Check the steps where you assign the GL accounts to the splitting rules.
suggest you to go through the below mentioned links
Balancing Field "Profit Center" in line item 001 not filled
Balancing field "profit center" in line item 001 not filled
GLT2201 - Balancing field profit center in line item 001 not filled
Balancing field "Profit Center" in line item 001 not filled
F-51: Balancing field "Profit Center" in line item 001 not filled
Balancinf field profit center in line item 001 not filled
Regards,
Ajeesh.s

Fields not populated in cube

hi experts,
i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
header cube screen shot before loading to multiprovider.
item cube screen shot before loading to multiprovider.
regards
jaswanthi

How are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.

Account of the opportunity is not populated after the creation of a task

Hi,
In our project, we are using the Opportunity Object after the creation of a task. Our tasks are always related to an existing account.
I was wondering why when I create an opportunity from a task, the field "Account Name" is not populated by default with the account name related to the task.
Any ideas?
Regards,
Dara
Edited by: user6469826 on 2 août 2011 11:40

Contact an electronics repair shop.

Field CABN-ATVIE is not brought through to the Class-Chars

Hi,
we're upgrading from SAP4.5 to ERP6.
We're re-creating all the Classification in the new system.
Field (CABN-ATVIE) is not populated in Class-Characteristic.
In table CABN u2013 SAP4.5 field Hidden (CABN-ATVIE) and ERP6 field No Display (CABN-ATVIE) are both ticked (X).
In characteristic u2013 SAP4.5 field Hidden (CABN-ATVIE) and ERP6 field No Display (CABN-ATVIE) are both ticked (X).
In class-characteristic u2013 SAP4.5 field Hidden (CABN-ATVIE) is ticked (X) but ERP6 field No Display (CABN-ATVIE) is NOT ticked ( ). And we're unable to change at this level.
In material u2013 SAP4.5 characteristic is Hidden but ERP6 characteristic is Displayed.
Please advise if this is a bug and how to fix it.
Thanks and regards,
Thomas

I think EXTWG - External Material Group field may be supressed for input in Config . You need to activated it for required material type .
Are you able to maintain EXTWG field manually in MM02 for a given material ?
Thanking You ,
Sudhakar AL

Making Manager field in user details tab mandatory in GRC 10

While raising the GRC Access request, I would like to make the Manager field madatory to be filled. What is happening now,, the requestor is raising the request without manager field filled, and its not able to find the manager as per the route and the request get cancelled.
Is there a option to modify the field to make it mandatory by red asterik as its there for other fields in user details tab.
Response is appreciated.

Hi ,
Please Navigate to IMG > Governance, Risk and Compliance > Access Control > User Provisioning > Maintain End User Personalization.
There are four columns of fields that can be maintained:
- Default value
- Mandatory
- Editable
- Visible
By Choosing YES or NO from the dropdown list under the Mandatory field, any field on the Access Request screen can be made mandatory.
Hope this helps.
Vikas

Sharepoint 2013 Active Directory Import- Manager field not updating

Hi,
SharePoint 2013 Active directory import -Manager field not updating
Concern/Issue-
We are using SharePoint and configured the Active Directory Import .First import it seems everything is working fine and OOB Organization chart built using User profile data is coming out right.
Now the user is moved from one Organization Unit to Another.
Now our Manager field is not Updating .There is change in AD manager attribute but not reflecting in the SharePoint User profile.
Manger field is mapped to "manager" attribute in SharePoint.
We tried removing the user and Re-Import using Incremental import but no luck.
Thanks for help in advance
Sachin

Moving a user from one OU to another in AD won't normally change the Manager attribute in AD. You would need to edit the user's organization settings to change the manager value in AD. I've also seen these changes not be picked up unless something
other than just the manager field in AD changing. Try changing something like Office location and see if the manager change is picked up by AD Import.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Line Item Field "Assignment" not populating

I am posting a KR doc. The assignment field in the line item is not populating with the date on the document is being posted in either of the line items, posting key 31 posting to Vendor and posting key 40 posting to an expense G/L account. The assignment field remains empty. I have checked some documents in the other company codes where this field is being populated with the date in the yyyymmdd.
Please let me know what controls this and how can I make this field populate.

Th Sory key for the GL for that company code should have the document date as the sort key.... check in FS00

Field in Classification Datasource not getting populated

Hi all,
I created a classifiacation datasource 1CL_ODS_001 from the MCH1 Table. when checking this in RSA3, Data is not populating in classification datasource in the field LOBM_HSDAT, LOBM_LFDAT, LOBM_VFDAT etc.
How does data get populated in LOBM fields.
Do i have to make some changes for data to get populated in this field.
Help needed please.
Regards,
Mariadas

Hi Vishnu,
Thanks for your response.
I followed the procedure described in this article.
"Step by Step Guide to Extract Batch Master Data via Generic and Classification Datasource to BW" http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a8b9c1-dee5-2d10-feb5-9b0d54126782?quicklink=index&overridelayout=true
I created a datasource from the View and fromt that datasource i created a classification datasource.
I checked in RSA6, the hide field is not checked. Is there anything else that i can do to update the fields.

New COPA Value field not populating in BW

We created a NEW value field (VV0056) in SAP COPA that is NOT pulling manual journal entries into BW (document types AB and SA). All other value fields are pulling in all document types and balance to SAP u2013 itu2019s this new one that is not. We do not have any restrictions on selection of data coming into BW.
The manual journal entry is in our CE1* table in R/3.
We are still 3.x data loading in our BW 7 system.
Any ideas on what to look for? Your input is greatly appreciated.
Renee Mercede

Hi Renee
The new fields that has been added must be either in the COPA table or the corresponding datasource.
If it is added in the table
1) You need to enhance the corresponding datasource with a z-field that wiill represent the field added in the table.
2) This field will have to be populated through an ABAP routine.
3) Check the populated field values in RSA3.
4) Replicate the datasource in BW.
5) Create infoobject for the enhanced field.
6) Add infoobject in the corresponding BW data targets.
7) Change transformations / UR's - TR's.
8) Extract data.
If it is added in the datasource - which means you know from which base table this field needs to be populated.
Carry out steps (2) to (8) from above.
Cheers
Umesh

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

Amount field is not populating properly

Expert's,
Here is an issue where one of the amount field not populating properly.For some opportunities the amount field will be just displyed as'0' but for some opprtunities the amount field is displaying as'$0'.The data we are pulling is from CRM.
Thanks in advance.
vasu.

Hi,
looks like extenstion of your last thread
did you already have a look in data in cube?just to make sure,try to display cube's data using List cube transaction .Take this amount field,corresponding Currency Key,and you rmost impotant characteristics...and check whether all records are having entry in 'currency' column?

Issue: profit center field is not populated in FB03 vendor line

Dear Friends...
After invoice verification, in accounting document (FB03: data entry view) profit center filed is not populated for the vendor line (its blank). However itu2019s populated for other account like material valuation class.
Where as in G/L view the profit center is populated in all the line items of ..
Here, I want to populate the field of profit center with the same profit center as that of the materials valuation class g/l account, in data entry field only...
Thanks in Advance....
Regards
Shashidhar

Hi
Profit centre field is populated in accounting entres that are directly linked to material master. You enter profit centre in material master. So if you do MIRO or MIGO, the account postings related to material master contains profit centre (like stock, GR/IR etc) but not the vendor account (vendor line item). same is the case for purchase document not appearing in vendor line item (accounting document)
Thanks

PDF file opening with blank fields - the field values are not populated.

Recently, our users have been facing this issue, "data not populating in the PDF fields".
We are using FDF in PHP to load the PDF templates and apply the data to the PDF fields. This works fine on many adobe versions but showing empty fields in few adobe versions. For e.g It worked fine with Adobe Reader 10.1.3 but did not work in 11.0.
This has been critical now as it is showing empty fields in IE11. Can you please help me overcome this issue.
Thanks!

All I can suggest is to try the latest Reader versions, i.e. 10.1.11 or 11.0.8.

Table I_KOMP in PO Pricning Item User Exit is not populating CHARG field

Hi,
I have activated the user exit EXIT_SAPLMEKO_002 which is used for pricing.
But the while creating PO the structure I_KOMP is not getting populated with CHARG i.e BATCH field which I want to use for pricing calculations.
Is there any thing to do so that the CHARG field in I_KOMP strucure is populated
Please help me for the same
Regards
Sujit Sawant

Hi,
I have activated the user exit EXIT_SAPLMEKO_002 which is used for pricing.
But the while creating PO the structure I_KOMP is not getting populated with CHARG i.e BATCH field which I want to use for pricing calculations.
Is there any thing to do so that the CHARG field in I_KOMP strucure is populated
Please help me for the same
Regards
Sujit Sawant

Manager field in AD is not populating

Similar Messages

Maybe you are looking for