Mandatory in material master with material type wise

Dear all
Is it possible to make a field mandatory in material master with material type wise?
kindly help

Hi
See the below config
Check in OMS2 for your material type for "field reference". then
Spro>logistics general>Material master-->field selection.
Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
If required take help from MM consultant
Regards
Antony

Similar Messages

  • Valuation Class according to Material Master but not Plant wise

    Hi,
    Is there way to find out the Valuation Class according to Material Master but not Plant wise...
    Plant wise, we can get into MBEW table, but I want to find valuation class directly...
    Plz guide..

    I need to change Valuation class against material number...
    We have 18 plant in our company and more than 2,50,000 material's.
    Which one easy task for change in material master, either 2,50,000 material's or 2,50,000 X 18 (45,00,000) material list.
    If I go with plant wise, we need to change 18 times...also this is time consuming process... As I know in all Plant's, valuation class must be same...
    please guide...

  • How to create a material master with referrence to exsisting material maste

    hi experts
    how to create the material master with reference to an existing material master ?
    please explain in steps
    regards
    jai

    Dear,
    It is very simple.
    Enter  MM01 t-code.
    Enter your existing material code in field of reference material code.
    If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
    After enter basic detail system ask you plant/storage location detail and view detail.
    Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
    Then click on all view, If you want to change some detail change it.
    Due to reference material all detail is come from reference material.
    Then click on save.
    NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
    Regards,
    Mahesh Wagh

  • Report For list of material Master with PO text

    Hi all,
    I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
    If any one can help, please reply to this theard.
    Regards,
    Kapil Kulkarni

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

  • Find Material Document with Movement type 103 for material document 105

    Hi experts,
    In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
    Regards,
    Abdullah

    Hi,
      you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
    But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
    Regards,
    Chaitanya

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

  • Materail recevice with referance to material document with mvt type 303

    Hi Guru:
    In MB1B we are creating mateiral document with movement type 303 from one plant to other plant.
    Now same material we need to receive in other plant with movement type 305 in same T code Mb1B.
    Now as per user requirement if there is number of item are coming in material document which is generate with movement type 303, why we need to give all material, qty, batch again in MB1B movement type 305,
    while we are receving same material in plant.
    In MB1B there is link to create material document with referance to material document but we can use this facility for creating new material document for movement type 303 of same mateiral, qty and batch.
    Please suggest is there any way to use this 303 movement type material document with movement type 305.
    Thanks.
    Virendra
    09887603301

    Hi
    In my opinion in MB1B you can not have Material Doc. as a ref. Doc. for M.Type: 305...
    But for MIGO transaction you can have Material doc. as a ref. doc. for M.Type: 305
    Goto ---> OLME ---> Settings for Enjoy Transaction ---> Settings for Goods Movements -
    > Settings for Transactions and Referance Documents ---> There...for MIGO_TR...Transfer Posting ---> Referance Documents ---> For your M.Type: 305 assign Material Document as a Referance Documnt...
    Reward if useful
    Regards
    S.Baskaran

  • Invoice (MIRO or FB60) with reference Material Master or Material Group

    Hi Gurus,
    I want to post invoice with reference to material master or material group.
    There is never purchase order, but i want to manages expenses on material categories,
    eventually have automatically the GL account after fullfilling material or material group.
    Thanks for your help,
    Denis

    Thanks,
    But when i post a material, i've an error message about the GL account. Have you used this process entirely ?
    Denis

  • I want validation while creating material master with profit center

    Dear Experts,
                           I want validation while creating material master with profit center.
    If 0001 plant having 100100 profit center
       0002 plant having  200200 profit center
    Material A cant be created for 0001 plant for with wrong profit center 200200.
    Kindly help & provide me solution clearly

    Hi,
    Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
    You should put in your validation control in the material master user exit. One of the exits you can use is
    MGA00001  Material Master (Industry): Checks and Enhancements
    Thanks & regards
    Hameed Parvez

  • Pending Routing or BOM material list with material in MARA table

    I want to tally the material codes in MARA table with the materials without routing and BOM . i.e. pending Routing or BOM material list with material in MARA table.
    Before MRP run How we will get this list ?
    Pl' give reply.
    Thanks .
    Regards.

    Hi Kishore,
    SAP does not have any standard reports to suite your requirement. What i would suggest is to take couple of data extract from table to validate.
    1. First dowload all materials which should have "BOM" and "Routing". This you can do by extracting "MARC" table data where field "BESKZ = 'E' or 'X' ".
    2. Now you can extract the data from "MAST" for BOM and "MAPL" for Routing details.
    Now do VLOOK up in excel to find the mismatch data.
    This can also be done by a customised program, which i dont think it is required since it is going to be used only once.
    You could also try SQVI with table joins
    Hope this helps...Reward your points if so,
    Regards,
    Prasobh

  • Difference between Material Master and Material ledger

    Can anyone tell me the difference if any between Material Master and Material ledger and its usage and interlink with SAP modules.
    Thanks for your time
    suresh arya

    Hi Suresh,
    The application component Actual Costing/Material Ledger fulfills two basic objectives: The ability to carry material prices in multiple currencies/valuations, and actual costing.
    The material master records are all information your company needs to manage a material is stored in a data record in the material aster, sorted by various different criteria.
    For more information regarding the functionality, you can see in path below, help SAP...
    Material Master data:
    http://help.sap.com/saphelp_47x200/helpdata/en/03/abb8f85fbe11d396a600a0c930e0da/frameset.htm....
    Material ledger:
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/5cd63835e211d38a710000e83234f3/frameset.htm..
    Regards,
    Paulo

  • Link of material movement with inspection type

    Hello Masters,
    I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
    But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
    Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
    I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
    One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
    I know query was too long to read and I think I was clear enough to explain what the requirement is.
    It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
    Thanks and regards,
    Devang

    Hi Devang,
    I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
    I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
    1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
    2.     Record defects and all other required information in notification.
    3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
    4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
    5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
    Here you need not create inspection lot, no need to use any user exit.
    Regards,
    Anand Rao

  • How to restrict material master by material type  t-code MM01

    Hi,
    how to restrict Materilal master by Material type in t-code MM01
    I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
    Amit

    >
    sapvinithbasis wrote:
    > hi
    > plz help me out in solving this issue
    > regards vinith
    Vinith,
    I have explained in great detail exactly what you need to do at every stage.  The steps I have outlined are the same that I follow every time that I want to apply material type restrictions. 
    I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you. 
    If you have done the following then it will work:
    1. Assign auth group to material type via OMS2
    2. Verified that check for M_MATE_MAR is active
    3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
    This is the last comment I will make on this topic.
    Cheers
    Alex

  • Upload Material master with long text using LSMW

    Hello,
    i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2,  purchasing, purchase order text, plant data 1,2.
    i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
    please help.

    ca u clarify how can i do it.
    suppos i have longtext   "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is  10 RMT.  A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping  of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire.  F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
    then what i have to do changes in lsmw.?

Maybe you are looking for

  • Error while deploying a process

    Hi, I am getting the following error when tried to deploy a simple bpel process from JDeveloper/BPEL Console. C:\BPEL\BPELEchoProject\build.xml:79: A problem occured while connecting to server "172.17.11.138" using port "80": org.apache.commons.fileu

  • How do I get rid of the 3D icon that is appearing on my screen?

    There is another post about this but it isn't helpful. There is an icon with a cube in it that is appearing in the upper left side of my screen. I can't find any way to turn it off. Every time I try to draw a square using the shape tool, it's in 3D.

  • Problem with Nested loop in Fox-Formula

    Dear Experts, Let s share the scenario : MaterialGroups with following Keys for Example AAAA, BBBB, CCCC..., Materialgroups are selected in the 1st input ready query, which is assigned to DataProvider DP_1 in a  webtemplate. every Materialgroup has s

  • Advance pricing for combined item rate

    Hi all, We are running oracle ebs 11i with database 10 , Our management introduce new rate list and this rate list depends on the other items quantity. You can say it combine price list. Suppose we have two items A and B. Normal price list : item qua

  • What could cause a server to be removed from the farm other than running PSConfig and removing it?

    Hi, We had a strange issue today.  One of our two production WFE servers in our SP2010 farm had become disconnected from the farm. I noticed it because I had created a new site collection within an existing web site last week but it was only availabl