Manged Property based on calculated column

Hi,
I set a refiner based on a managed property.
the managed property is mapped to the crawled property which is based on a document library calculated column with a formula:
="In Process" .
In refinement panel i see
string;#In Process
instead of just display:
In Process
why is it so?
keren tsur

Hi keren,
According to your description, my understanding is that you want to know why the value showed as “string;#In Process” of calculated column in Refinement Panel.
Per my knowledge, it may be due to how the calculated column stores the value.
Please take a look at the article below, from which we can know that the calculated column values show with string;# as the prefix in the lookup column:
http://sympmarc.com/2009/10/09/sharepoint-lookup-column-based-on-a-calculated-column-woes/
As its value has string;# as the prefix in calculated column, so the value shows in the Refinement Panel is string;#In Progress.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

How to set the read only property for dynamic ALV column

Hi All,
I have built one dynamiv ALV and I have one name column inside that ALV for which I have to set read only property based on two column fields that exist in the same ALV,say IS_SP and IS_CORP of type boolean.
If any one of the flag is 'X',i have to make that name column as display only and
If both flag are not set,it should be displayed as ediatable column.
I have written one method as INIT_ALV which gets called when ALV is loaded.
Code is as follows:
lr_column_settings ?= wd_this->alv_all_roles.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
   WHEN <NAMECOLUMN>. "name column which should be editable/display
Create Input Field
        CREATE OBJECT lr_uie_input_field_ro
          EXPORTING
            value_fieldname = ls_column-id.
     ls_column-r_column->set_cell_editor( lr_uie_input_field_ro ).
    After this,I have to set the read only property based on IS_SP and IS_CORP values,
          CALL METHOD lr_uie_input_field_ro->set_read_only_fieldname
          EXPORTING
            *value = 'IS_SP' or 'IS_CORP'
ENDLOOP.
I dont want to use cell variants also.
Help me to achieve this.
Thanks and Regards,
Divya

Divya - I have done it in the past following these documents. Please read it and try it it will work.
Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
thanks!
Jason PV

Need to show the images in calculated column based on the condition in sharepoint 2013.

Hi ,
I'm working in sharepoint 2013, In this i want to show an image in calculated column based on the condition, but image is not showing .
In sharepoint 2010 its working with help of javascript in content editor on the same page. Same thing i tried in SP 2013. but doesn't work.
Could any one please give proper solution for this?
Thanks in advance.
by,
Siva.

Hi please provide the JS you have used in the content editor as well as the calculation for the column so we can better understand what's maybe differs?
Blog: chrisstahl.wordpress.com Twitter:
@Cstahl

How to create new calculated column based on filtered columns?

Dear All,
I'm using Oracle Analysis.
I have two column, each one have different formula.
My Formula based on filter.
Column1
FILTER("DW"."SUM_PLAN_MONTH_AMOUNT" USING ("DW"."PLAN_YEAR" BETWEEN YEAR(DATE'@{P_BEGIN_DATE}') and YEAR(DATE'@{P_END_DATE}')))Column2
FILTER("PAYMENTS"."SUM_PAY_AMOUNT" / 1000 USING ("PAYMENTS"."PAY_DATE_PAID" BETWEEN DATE'@{P_BEGIN_DATE}' AND DATE'@{P_END_DATE}'))How to add new calculated column based on those two column?
For example:
Column1 | Column2 | NewColumn
5 | 10 | 10 / 5 * 100
7 | 12 | 12 / 7 * 100
Regards,
Eba
Edited by: Erdenebayar on Apr 19, 2012 1:42 PM
Edited by: Erdenebayar on Apr 19, 2012 3:37 PM

Hello MK,
I have a tried following formula. It is working, but result is not filtered.
I filtered "PAYMENTS"."SUM_PAY_AMOUNT" and "DW"."SUM_PLAN_MONTH_AMOUNT" columns.
"PAYMENTS"."SUM_PAY_AMOUNT" / "DW"."SUM_PLAN_MONTH_AMOUNT" * 100Can you share me some tutorial?
BR,
Eba
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM

SharePoint 2013 Make Calculated Column based on Custom Column

In SharePoint 2013, I am trying to create a Calculated Column that is a shortened display of another Custom Column. The Calculated Column would just show the first 100 characters concatenated with "..." like in the following formula:
=LEFT([CustomColumn],100)&"..."
However, every time that I go to create this calculated column, SharePoint doesn't provide my [CustomColumn] in the "Insert Column:" list. If I type it in anyway, SharePoint throws an error.
Details on my Column, List, and Site below:
Col. Type: Multiple lines of text
Col. Group: Custom Columns
Col. Text Type: Enhanced rich text
List Content Type: Custom Type Inherits from Event
Site Type: Publishing
Also, to no avail, I found this similar post (link below), but creating the Site Column and Calculated Column
before adding it to the Content Type did not work for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/26a7517e-ba43-4c49-95aa-3e6f7f4207ba/calculated-field-in-content-type-not-working
Anyone out there know how to coax SharePoint into submission?!

Multi lines of text are one of the types of columns which can't be used by calculated columns/fields. Among such unusable columns are also Lookup columns, People columns, External Columns, MMS columns, etc.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

DAX Dynamic Banding | Calculated Member based on Calculated Field

Good morning,
I've created a Power Pivot model that measures the blood glucose levels of clinical patients at specific times of the day. The requirement is that this metric, let's call it GlucoseLevel, is always averaged as it wouldn't make sense to sum up the values.
To meet this first requirement, I set the "Summarize By" property of the GlucoseLevel column to "Average".
The second requirement is to band the GlucoseLevel values so that groups of people can be measured by this band rather than by the individual measure values. I created a banding table in Excel and then imported it into the Power Pivot model. The banding table
has three columns (BandName, MinValue and MaxValue) and has the following values:
VERYLOW: Min Value = 0; Max Value = 3.99
OK: Min Value = 4; Max Value = 6.99
WARNING: Min Value = 7; Max Value = 10.99CRITICAL: Min Value = 11; Max Value = 30.00
It is at this point where I face my challenge. I have a GlucoseLevel measure and I have a banding table. Great. The challenge is: How do I create a calculated, dynamic
member that will look at my GlucoseLevel measure (at whatever level), do a lookup to my banding table, and then return the "BandName" column from the Banding table at that specific level? So to clarify what I mean by level: I want to be able
to view the bandings at Year level, or a Month level, or even at a week level. Then depending on what level I am at, my measure should have a Band associated to it.
I've tried to solve this issue in a couple of ways:
Attempt 1
Create a calculated column in my fact table that contains a nested IF statement to manually band my GlucoseLevel values. This works fine if I view my data at the lowest level of granularity, however
it does not work if I start looking at my data at the day, week, month etc. levels
Attempt 2
1.) Create a calculated field (not a calculated column) that averages my GlucoseLevel measure. This is cool because it will average my measure at whatever level I am viewing it at. Let's call
this field Bob...
2.) Band my measure Bob by creating another calculated field (called PatientBand). This field uses my banding table (described earlier) in conjunction with my calculated field Bob. This works perfectly, except for one big flaw: Excel sees this banding field
as a measure, and not as something that I can use as a column / row...
So my question is: Can I trick Excel into viewing my PatientBand calculated field as an attribute, and not as a measure? And if not, how do I get around this challenge? Here is the DAX formula that I used to create my second calculated field "PatientBand":
PatientBand:=CALCULATE(
VALUES (Bandings[BandName]);
FILTER (
Bandings;
Test[Bob] >= Bandings[MinValue]
&& Test[Bob] <= Bandings[MaxValue]
Thanks!

So there are 2 ways that I can think of for doing that.
1) if you are only using MDX clients like Excel or Reporting services you can create a text based measure that returns the banding name. (Note that this sort of approach does not work at the moment with PowerView as it only displays numeric measures). This
would effectively let you show a label next to a reading as opposed to moving the reading under a given banding column.
Banding Name :=
CALCULATE (
VALUES ( Bands[BandName] ),
FILTER (
Bands,
[Average of GlucoseReading] >= Bands[BandMin]
&& [Average of GlucoseReading] <= Bands[BandMax]
&& NOT ( ISBLANK ( [Average of GlucoseReading] ) )
2) This next approach will show the results exactly as you had them in your sample screenshots. It just takes a slight bending of the DAX. I'm using a SUMX here, not because I want to sum anything, but because the "X" version of SUMX basically loops over
every row in the specified table and sums the expression in the second parameter. I have setup the second parameter so that it only returns a single value for the average if it is in the appropriate banding.
Banded Average:=IF (
HASONEVALUE ( Bands[BandName] ),
SUMX(
'Bands',
IF (
NOT ( ISBLANK ( [Average of GlucoseReading] ) )
&& [Average of GlucoseReading] >= MIN ( Bands[BandMin] )
&& [Average of GlucoseReading] <= MIN ( Bands[BandMax] ),
AVERAGE(Readings[GlucoseReading]),
BLANK()
,AVERAGE(Readings[GlucoseReading])
http://darren.gosbell.com - please mark correct answers

Problem with binding value on the UI from a calculated column in the view

I have calculated field "Readiness" in my db view, which gets calculated based on other columns in the same table. I have added new column to my EO using "Add from table" option and added the same column from to VO using "Add from EO" option. In my application, I will update a particular date field in the UI and this calculated column "Readiness" in the db will be set to yes or no and this logic is working fine, both date date field and calculated field are in same view object. I have added a attribute binding to this "Readiness" column in my view page. The problem is the calculated column value does not reflect the new value in the db, it shows the old value. I have tried different refresh option for the iterator and ppr option for the field binding. Even after reloading the page, the value shown on the UI page is different from the value in db, other bindings on the UI page works fine, not sure any special settings are required for the Calculated columns. any ideas are appreciated.
Thanks for your help,
Surya

I tried to add soms debugging statements in the EO and getters method, the calcaulated column is not picking the value in db view. I'm not any special iterator/field settings are required at BC level. I'm a newbie, any help is appreciated.
Thanks,
Surya

Getting an error while using if statement in calculated column.can anyone please help me with this issue

I am trying to learn HANA on my own.i have product id,product name,delivery date and Grossamount in my calculated view.i am trying to create calculated column where i need Grossamount in two columns based on delivery date.I have 2012 and 2013 as values for my delivery date.so i have created two column as grossamount_2012 and grossamount_2013.if i have delivery date as 4thdec,2012 i want the grossamount value to be in coloumn grossamount_2012 and the grossamount_2013 should be blank.i have written an expression like this
if("Deliverydate" <= longdate(2012-12-04),"Grossamount","0")
and it looks like this is wrong.i am getting the text Grossamount rather than values for that field in my output.so can anyone help me please?

Hi chandra
i am trying to get the same result by using sql script and CE functions.i have written the following code
select A."PRODUCTID",
       E."TEXT" as "PRODUCTNAME",
       C."COUNTRY",
       D."DELIVERYDATE",
       Sum(D."GROSSAMOUNT") as "GROSSAMOUNT"
       from "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Products" as A
       inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.BusinessPartner" as B
       on A."SUPPLIERID" = B."PARTNERID"
       inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Addresses" as C
       on B."ADDRESSID" = C."ADDRESSID"
       inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Purchase.Item" as D
       on A."PRODUCTID" = D."PRODUCTID"
       inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Util.Texts" as E
       on A."NAMEID" = E."TEXTID"
       GROUP BY A."PRODUCTID",E."TEXT",C."COUNTRY",D."DELIVERYDATE";
this is working fine but i want to split the grossamount based on current year and last year.Any idea how to do this
In calculation view using script can we use if and case statements?

Calculated Column using IF statement with DATEIF formula

I have a dated column that includes a date when a position is vacated otherwise the field is blank if the position is still filled. I want a calculated column to return the number of days the position has been vancant from the date that is listed to today.
So the following was entered & works.....
=DATEDIF([Vacancy Date],Today,"d")
The delima is that it is also returning a value when there is no date in the dated column but it returns a funky number 42,069. What I want it to return when the dated column is blank is blank or zero would work too. I don't know how to incorporate that
into this formula.

You are correct it no longer reads that column as Today.... So is there anyway to make this a calculated column for my purposes?
I'm going to use SharePoint list for a Position Pool & managing positions within a large department. What I'm attempting to do with this column is have a current count of the number of days since a position has been vacant. Our system that I pull the
position data from will give me the vacancy date for those positions & where the position is filled the date field will be blank. So I'm wanting this column to return a 0 when the position is listed as filled & the number of days vacant based on the
vacancy date column I have. Is there any way to make this work in SharePoint? Obviously I can make that work in Excel however my task was to load raw data into SharePoint & have SharePoint do the work if possible with little to no human intervention prior
to loading to SharePoint.
Thank you,
MMHagman

Creating a Status column (IF statement/calculated column)

I'm developing list for managing a project with 11 columns each representing a project milestone.
We'll call them A,B,C...K.
"A" representing a status of "Project Started" and K representing "Project Complete" with various statuses in between.
When a milestone has been reached, the date is input into the appropriate column. So when the project is complete, there will be dates in all columns A-K
I wish to incorporate a new column that indicates the current status depending on if columns A-K have been filled in.
So if all columns are blank, a status of "Awaiting start" is indicated.
If column A is filled in with a date, a status of "A" is indicated.
If columns A and column B are filled in then a status of "B" is indicated.
If columns A, B and C are filled in then a status of "C" is indicated. * * If all the columns are filled in with dates, a status of "K" is indicated.
Any ideas? Some form of If statement in a calculated Status column?

Hello,
You can use nested if statement something like below.
For example, I have one column named as 'Score' and the requirement is to perform quartile breakup based on score so for that I can use below calculated formula in my calculated column.
=IF(INT(Score)>85,"85 Above"
,IF(AND(85>=INT(Score),INT(Score)>=80),"85-80"
,IF(AND(79>=INT(Score),INT(Score)>=75),"79-75"
,IF(INT(Score)<75,"Below 75","0"))))
Have below links for more details.
Calculated Field Formulas
Examples of common formulas
Thanks. Please mark it as an answer if it helped.

Get the month from a date column with the calculated column

I am trying to get the month from a date field with the help of calculated column. However I get this syntax error whenever I want to submit the formula:
Error
The formula contains a syntax error or is not supported.
the default language of our site is German and [datum, von] is a date field.

Hi,
I have created two columns
Current MM-YY
Calculated (calculation based on other columns)
Today
Date and Time
Current MM-YY is calculated value with formula as
=TEXT(Today,"mmmm")
But the output shows as December instead of May.
I have tried =TEXT([Datum, von];"mmmm") but no help.
I am trying to populated the column automatically with current month..ex: if its May the field should show May, next month it should show June an so on.
Any kind help is grateful.
Regards,
Pradeep

Named Calculation Column in DSV - SSAS Cube (2012)

Hi,
I have a question on creating named calculation (derived column) in data source view of SSAS 2012 Cube. Below scenario :
If i am writing an expression in Fact table (say, creating named calculation column, "X" in this fact table) then is it possible to have a case statement based on the condition from one of the dimension data ?
For ex., one my dimension "KC_Dim" contains column "KC_Code" on which i want to have a condition something like below:
Case
When KC_DIM.KC_Code = "-"
Then 0
Else FactTable.Measure
End
how to achieve this specially because i am writing it in fact table but the condition mentions dimension columns which it is giving error "could not find the dimension column"
any idea ?
Thanks

Hi UltraDev,
For the first questions "is it possible to have a case statement based on the condition from one of the dimension data ?"the answer is yes. The expresion for the named calculation should be a valid SQL expresion. So just the Case statement should be specified,
like:
Case [Month]
When 1 Then 'January'
When 2 Then 'February'
End
Then the SQL expression can refer to other tables in the data source view. You can refer to the link below to see the detail information.
Define Named Calculations in a Data Source View (Analysis Services)
Introduction to Named Calculations in SQL Server Analysis Services
Regards,
Charlie Liao
TechNet Community Support

How to create a calculated column in sharepoint

I created the custom list in share point. In that list i renamed the title as
Name.
I created the WindowsID as person or group column in share point list.
In the same list, I want to create a new calculated column as EmpName as hyperlink with the below formula
="<a href='"&WindowsID &"'>"&Name&"</a>"
But I am unable to create a new column by using above formula.
Could you please let me know what i missed in the above formula.
Please note that i am unable to see the WindowsID in the insert column.
Thanks for ur support.

Hello
Sorry for the delay replay.
Based on your guidance,i followed the below steps
1.created the loginname column of type person or group
2.Added the contentquery webpart
3.crated the custom xslt template
4.Please find the below template
<xsl:template name="ListingItem" match="Row[@Style='ListingItem']" mode="itemstyle">
<xsl:variable name="DisplayTitle">
<xsl:call-template name="OuterTemplate.GetTitle">
<xsl:with-param name="Title" select="@Title"/>
<xsl:with-param name="UrlColumnName" select="'LinkUrl'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="LoginID">
<xsl:value-of select="ddwrt:UserLookup(string(@DomainID) ,'User')" />
</xsl:variable>
<div id="membersdiv" class="members">

<xsl:if test="$LoginID != ''">
<a href="{$LoginID}">
<xsl:value-of select="@Title" disable-output-escaping="yes"/>
</a>
</script>
</xsl:if>
</div>
</xsl:template>
if user is having the login id then i need display the title.on click of that title i need to redirect to user settings page like http://url/_layouts/15/userdisp.aspx?ID=1 .How can i redirect to
the sharepoint personal settings page based on person click

How to use a calculated column in the same query

Hi All,
I need some help with using a calculated column in the same query.
For eq
I am joining a couple of tables and some of the select columns are calculated based on the columns of the tables and i want a new column in the same query to use this calculated feild in some other calcualtion.
something like this...
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
Thanks

user548171 wrote:
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
ThanksWhat about just repeating the column values:
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( (12+3) / (12-3) * 100 > 0 ) THEN 'Yes' ELSE 'No' END FROM DUAL

How to refer a column in a calculated column in Answers Criteria

Hi All,
I have a set of columns (which contains column level filters).
I also have 2 more calculated columns whose formula is based on the earlier columns (like (col1-col2)/col1 ).
Presently, i'm using the col1 and col2 formulas and placed them in the calculated cols.
Instead, is there any way to refer to the columns(col1, col2) without placing its col formula, in the calculated column.
is there any such thing like.. ({c1} - {c2}) / {c1}
Thank you,
Raghu

Hi,
Thank you for the replies.
actually i have a huge formula in 'col 1' and 'col 2' as well
and in the new calculated col, i'm again using that huge formula to implement the logic col1-col2/col1.
so, will this affect the performance.?
or the performance will be the same?
Thank you,
Raghu

Manged Property based on calculated column

Similar Messages

Maybe you are looking for