Manual duplex times out on wireless connectivity only - D5560 printer

The printer is set for manual duplex. I use a Dell Insiron laptop (OSW7) with a wireless connection to Netgear Wireless-N 3000 Router. IP address is 192.168.1.5:3910 for the wireless printer.
The pages print on the one side and then simply stop printing on the last page just before the printer should be releasing it.
If I leave everything alone, approx 15 seconds later the page gets released and the print cancels.
If I manually tug the final page out of the printer and manually insert for the second side the page has a small area at the end unfinished. The first page of the second side may have this data printed on it.
I've reinstalled the software and all hardware has driver updates etc.
My PC is cable connected to the router and I've never had this happen. It is only on the wireless connection for the laptop.
Is there a solution?

Does the printer recover by power-cycling your switch or unplugging the LAN cable to the printer?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Similar Messages

504 PROXY TIME OUT. The connection time out

Hi
one of our users is facing 504 proxy time out. The connection time out
using our ITS link. what would be the possible solutions to reduce this kind of error.
Regards
MA.Sreenivasan

Hello,
If only a particular user is facing this problem, check with the user on what she/he is doing.
if everyone is facing, have a look at ITS timeout parameters.
~rfcTimeOut
~userTimeout
Regards,
Siddhesh

Both ethernet and wireless time-out trying to connect

I'm having a problem with getting my laptops' IP assigned by dhcp. Both over ethernet and wireless.
I have no problem connecting to my WPA connection at home, but now I'm at my parents for a week or two, it refuses to connect to their WEP network.
To connect to my WPA network I run this script from rc.local, which works fine on startup.
ifconfig ra0 up
iwconfig ra0 essid *********
iwconfig ra0 ap **:**:**:**:**:**
iwconfig ra0 rate auto
iwconfig ra0 channel auto
iwconfig ra0 mode Managed
iwconfig ra0 txpower auto
iwpriv ra0 set AuthMode=WPAPSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set WPAPSK=***************************************
iwpriv ra0 set TxRate=0
dhcpcd ra0
So for the WEP network, I have commented all that out and changed rc.conf like so:
lo="lo 127.0.0.1"
eth0="dhcp"
ra0="dhcp"
wlan_ra0="ra0 essid ***** key *******************"
WLAN_INTERFACES=(ra0)
INTERFACES=(lo eth0 ra0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
But when I try to connect it just returns "Error, ra0: timed out".
I have also tried modifying rc.local (appropriately i think), but that seems to time-out too.
This wouldn't be so bad if I had the option to connect by ethernet, but that doesnt work either! It also times out, just like the wireless. I don't think it is the router, as all the other computers in the house work fine, both wired and wireless. But I don't think it's a driver issue either, as I can see all the AP's in kismet, and also I used the ethernet port when I first installed Arch a couple of months ago. I assume it's dodgy config files or clashing commands or something, but I've looked in the wiki and other forums etc, and I can't see what I'm doing wrong.
Any help would be very appreciated.
Thank you.
Paul

Make sure about the addresses for the LAN the router at your parents is using - they are not necessarily the same.

Speedport time out fail wireless

I am connected to ethernet port, no problem.
AirPort fails to connect. Now Windows with two local machines connect ok. My previous Dell connected.
My AirPort works at home, a Bell Modem.
SpeedPort W 700 V seems to have some issues for Win.
The SpeedPort does not reply giving time out same as incorrect password.
I tried a manual connect with full name from my AirPort detection script.
Also problem with iTouch, but it failed to reconnect at home after upgrade to new software.

SpeedPort W 700 V is both wireless and wired. I am connected to wired now.
When disconnected, the wireless shows on AirPort and asks for password. Entering password gives a time out. I tried a manual connection with network name WLAN-4A7D03 selected security type and entered password. Again a time out. The SpeedPort fails to handshake on receiving the password. That is, I do not think the password accepted reply is connecting. My AirPort works on other wireless connection in Canada. I am in Germany and the SpeedPort modem is a few years old, but I had no trouble with my new Dell windows Vista last year.
This could be a SpeedPort issue. I know the SpeedPort wireless is working because two Windows computers are connected to the wireless. I did find reports of some Windows machines having difficulty connecting to SpeedPort but no comment on Apple problems.
By the way thank you for answering. I will be traveling in Italy where most hotels only have wireless connections. So I am trying to isolate problem to SpeedPort. If it is my use of AirPort then I have a problem. If necessary I could buy a USB port wireless.
I do know update of my iTouch has crashed its wireless connection. I tried reset to orignial but it then automatically upgrades and I am back where I started.
These are my first Apple products so I may be missing something. The more I use the Apple Interface the more I like it.

My iMac is printing duplexed documents on a wirelessly connected Epson printer extremely slowly (minutes), but prints fast from and IOS device using AirPrint. Settings don't offer any help. Can anyone advise, please?

I have a one-year old (intel) iMac, now running on Mountain Lion. I have a wireless network with an Epson Photo Stylus PX830FWD printer which has an auto-duplexer. My problem is that when I print a two-sided document, the print takes minutes rather than seconds. It prints at normal speed if I use the print facility on my iPad or iPhone (AirPrint), which suggests that the Mac settings are at fault. I have been through all the settings on System Preferences that I can find, but nothing makes any difference.
I didn't notice it prining at slow speed on Snow Leopard or Lion OSX!
Any suggestions, please?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Fms_adminConsole.htm remote login times out, won't connect

FlashMediaServer4.5_x64.tar.gz (fms 4.5.1 release)
linux instructions followed, success!
System Information, logs, etc.. Below.
uname -a
Linux poolhdz01.localdomain 3.0.0-16-generic #28-Ubuntu SMP x86_64 x86_64 x86_64 GNU/Linux
lsb_release -a
Distributor ID: Ubuntu
Description:    Ubuntu 11.10 x64
Release:        11.10
Codename:     oneiric
ps -A
PID TTY          TIME CMD
    1 ?        00:00:00 init
    2 ?        00:00:00 kthreadd
    3 ?        00:00:00 ksoftirqd/0
    6 ?        00:00:00 migration/0
    7 ?        00:00:00 migration/1
    9 ?        00:00:00 ksoftirqd/1
   10 ?        00:00:00 kworker/0:1
   11 ?        00:00:00 cpuset
   12 ?        00:00:00 khelper
   13 ?        00:00:00 netns
   15 ?        00:00:00 sync_supers
   16 ?        00:00:00 bdi-default
   17 ?        00:00:00 kintegrityd
   18 ?        00:00:00 kblockd
   19 ?        00:00:00 ata_sff
   20 ?        00:00:00 khubd
   21 ?        00:00:00 md
   22 ?        00:00:00 khungtaskd
   23 ?        00:00:00 kswapd0
   24 ?        00:00:00 ksmd
   25 ?        00:00:00 khugepaged
   26 ?        00:00:00 fsnotify_mark
   27 ?        00:00:00 ecryptfs-kthrea
   28 ?        00:00:00 crypto
   36 ?        00:00:00 kthrotld
   39 ?        00:00:00 scsi_eh_0
   40 ?        00:00:00 scsi_eh_1
   41 ?        00:00:00 kworker/u:2
   61 ?        00:00:00 kworker/0:2
189 ?        00:00:00 scsi_eh_2
196 ?        00:00:00 scsi_eh_3
216 ?        00:00:00 scsi_eh_4
217 ?        00:00:00 scsi_eh_5
218 ?        00:00:00 scsi_eh_6
219 ?        00:00:00 scsi_eh_7
220 ?        00:00:00 scsi_eh_8
221 ?        00:00:00 scsi_eh_9
225 ?        00:00:00 kworker/u:7
243 ?        00:00:00 kjournald
295 ?        00:00:00 upstart-udev-br
304 ?        00:00:00 udevd
339 ?        00:00:00 irq/16-mei
393 ?        00:00:00 udevd
394 ?        00:00:00 udevd
452 ?        00:00:00 kpsmoused
551 ?        00:00:00 upstart-socket-
570 ?        00:00:00 kjournald
578 ?        00:00:00 kjournald
602 ?        00:00:00 sshd
603 ?        00:00:00 rsyslogd
613 ?        00:00:00 dbus-daemon
658 tty4     00:00:00 getty
664 tty5     00:00:00 getty
668 tty2     00:00:00 getty
670 tty3     00:00:00 getty
676 tty6     00:00:00 getty
687 ?        00:00:00 irqbalance
697 ?        00:00:01 mysqld
705 ?        00:00:00 named
709 ?        00:00:00 cron
712 ?        00:00:00 atd
775 tty1     00:00:00 getty
839 ?        00:00:00 console-kit-dae
906 ?        00:00:00 polkitd
1052 ?        00:00:00 sshd
1071 pts/1    00:00:00 bash
1303 ?        00:00:01 fmsmaster
1324 ?        00:00:00 httpd
1325 ?        00:00:00 httpd
1326 ?        00:00:00 httpd
1327 ?        00:00:00 httpd
1410 ?        00:00:04 fmsedge
1489 ?        00:00:03 kworker/1:2
1506 ?        00:00:01 fmsadmin
1555 ?        00:00:00 httpd
1583 ?        00:00:09 fmscore
1736 ?        00:00:00 flush-8:0
1766 ?        00:00:00 kworker/1:1
1775 pts/1    00:00:00 ps
netstat --listen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 *:1935                  *:*                     LISTEN
tcp        0      0 *:www                   *:*                     LISTEN
tcp        0      0 *:2224                  *:*                     LISTEN
tcp        0      0 19.103-44-209.st:domain *:*                     LISTEN
tcp        0      0 poolhdz01.locald:domain *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:19350 *:*                     LISTEN
tcp        0      0 *:1111                  *:*                     LISTEN
tcp        0      0 poolhdz01.localdoma:953 *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:11110 *:*                     LISTEN
tcp        0      0 *:8134                  *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:mysql *:*                     LISTEN
tcp6       0      0 [::]:2224               [::]:*                  LISTEN
tcp6       0      0 [::]:domain             [::]:*                  LISTEN
tcp6       0      0 ip6-localhost:953       [::]:*                  LISTEN
/etc/hosts
127.0.0.1       poolhdz01.localdomain localhost
127.0.1.1       netelubuntuinstall.localdomain netelubuntuinstall
/etc/hostname
poolhdz01.localdomain
/opt/adobe/fms/logs/master.00.log
#Version: 1.0
#Start-Date: 2012-03-01 19:29:49
#Software: Adobe Flash Media Server 4.5.1 r484 x64
#Date: 2012-03-01
#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2012-03-01      19:29:44        1303    (i)2581173      FMS detected IPv6 proto
col stack!      -
2012-03-01      19:29:44        1303    (i)2581173      FMS config <NetworkingI
Pv6 enable=false>       -
2012-03-01      19:29:44        1303    (i)2581173      FMS running in IPv4 pro
tocol stack mode!       -
2012-03-01      19:29:44        1303    (i)2581173      Host: poolhdz01.localdo
main IPv4: 209.44.103.19        -
2012-03-01      19:29:44        1303    (i)2571011      Server starting...    -
2012-03-01      19:29:46        1303    (i)2581413      /opt/adobe/fms/Apache2.
2/bin/httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k start returne
d 0: [Thu Mar 01 19:29:44 2012] [info] mod_jithttp - FMS installation path: "/o
pt/adobe/fms/" -
2012-03-01      19:29:46        1303    (i)2581224      Edge (1410) started, ar
guments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms
/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgenam
e "edge1".      -
2012-03-01      19:29:46        1303    (i)2571111      Server started (/opt/ad
obe/fms/conf/Server.xml).       -
2012-03-01      19:31:07        1303    (i)2581221      Core (1583) started, ar
guments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_
1" -console -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defau
ltVHost_:::_1". -
/opt/adobe/fms/logs/edge.00.log
#Version: 1.0
#Start-Date: 2012-03-01 19:29:51
#Software: Adobe Flash Media Server 4.5.1 r484 x64
#Date: 2012-03-01
#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2012-03-01      19:29:46        1410    (i)2581173      FMS detected IPv6 proto
col stack!      -
2012-03-01      19:29:46        1410    (i)2581173      FMS config <NetworkingI
Pv6 enable=false>       -
2012-03-01      19:29:46        1410    (i)2581173      FMS running in IPv4 pro
tocol stack mode!       -
2012-03-01      19:29:46        1410    (i)2581173      Host: poolhdz01.localdo
main IPv4: 209.44.103.19        -
2012-03-01      19:29:46        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : localhost:19350/v4 -
2012-03-01      19:29:47        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 1935/v4     -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 127.0.0.1:19350 (rtmfp-core)/v4     -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 209.44.103.19:19350 (rtmfp-core)/v4 -
2012-03-01      19:29:48        1410    (i)2631509      Public rtmfp-core addre
sses for listener _defaultRoot__edge1 are: 127.0.0.1:19350;209.44.103.19:19350-
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 127.0.0.1:1935 (rtmfp)/v4   -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 209.44.103.19:1935 (rtmfp)/v4       -
2012-03-01      19:31:07        1410    (i)2581252      Registering core (1583)
/opt/adobe/fms/conf/fms.ini
SERVER.ADMIN_USERNAME = zach
SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.PROCESS_UID = 1001
SERVER.PROCESS_GID = 1001
SERVER.LICENSEINFO =
LIVE_DIR = /opt/adobe/fms/applications/live
VOD_COMMON_DIR = /opt/adobe/fms/webroot/vod
VOD_DIR = /opt/adobe/fms/applications/vod/media
SERVER.FLVCACHE_MAXSIZE=500
SERVER.HTTPD_ENABLED = true
ADAPTOR.HOSTPORT = :1935
HTTPPROXY.HOST = :8134
ADAPTOR.HTTPIDENT2 =
VHOST.APPSDIR = /opt/adobe/fms/applications
APP.JS_SCRIPTLIBPATH = /opt/adobe/fms/scriptlib
LOGGER.LOGDIR =
SERS.HTTPCOMMAND_ALLOW = true
/opt/adoble/fms/conf/Users.xml
<Root>
    <UserList>
           <User name="${SERVER.ADMIN_USERNAME}">
                    <Password>No Displayed</Password>
            <Allow></Allow>
            <Deny></Deny>
            <Order>Allow,Deny</Order>
        </User>
</UserList>
    <AdminServer>
        <HTTPCommands>
            <Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>
            <Allow>ping</Allow>
            <Deny>All</Deny>
            <Order>Deny,Allow</Order>
        </HTTPCommands>
    </AdminServer>
</Root>
FMS 4.5.1 is accessible here http://209.44.103.19/
Maybe out of this information it will be seen why the http:80 login will not accept my credentials.
Thanks in Advance.

I solved my own issue.. The default admin port on :1111 was not redirected via NAT, and instead used nmap to route open ports, and 2222 was available. Typically used for ssh terminal administration..
Edit /opt/adobe/fms/conf/fms.ini and change:
From SERVER.ADMINSERVER_HOSTPORT = :1111
To SERVER.ADMINSERVER_HOSTPORT = :2222 or port that is bi-directional via tcp
I would suggest Adobe to set SERVER.ADMINSERVER_HOSTPORT = :2222 by default to aleviate this common issue.

TS1702 app loading: keep on getting "application cannot be downloaded at this time" despite strong wireless connectivity. anyone any ideas on what i can do? many thanks. mike.

hello there
despite strong wireless connectivity, no matter what i do, i get the message "cannot be downloaded at thisntime" for any app that i have been sent an update for. i now have 23 updates waiting to be downloaded, according to my appnstore! can anyone advise? thank you very much.

Try the basics if you haven already done so.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Sign out of your account, then sign in again. Settings>Store>Apple ID. Tap your ID and sign out. Go back to Settings>Store>Sign in and then try to update again.

MII 12.1 time out for JCo Connection

I'm running this MII transaction that, is using a JCO connection to run a Function Module in SAP.
The problem we have is, that function module takes more than 60 seconds to run an return the values, that is correct because we are gathering a big amount of data, so if we run the function Module inside SAP it works ok, BUT, if we run the transaction from MII we receive a time out after exactly 60
seconds.
We have already modified several time out parameters inside MII
but those changes are not making any difference.
Do you know where that JCo time out parameter is inside MII 12.1?

Hi Salvador,
Try to increase the session timeout to 300 in SAP Menu --> System Properties. Initial it will be 60 sec only.
And increase MII workbench Read Timeout as well. Help --> Setting --> Read Timeout
If it doesn't solved your problem, go through below post
How to set timeout for each level in MII?
Regards,
Praveen Reddy

The connection to our airport express says it has time out and lost connection?

the connecton to airport express say it has timed out and lost connection. can not hear music from airport express speakers. only the computer

What is your overall network configuration with the AirPort Express? That is, is the Express configured to join a wireless network provided by another router or is it your main router? If it is joining another router, what is the make & model of this router? Which model of the Express do you have? Finally, if you have another router, where is the Express located related to this router? Same room, different room, different floor?

Blank screen and time out message when connecting to EC2 via Putty

successfully installed SP 09 trial version on EC2. when trying to connect to the instance via Putty following all the proper steps in the Guide, after upload of PPK file, all I get is a black screen with "the session time out" message in 10-15 sec.
HELP !!!!!- researched everything, trying using elastic fox to ovoid conversion of pem file into ppk . same story there.

Hello Vynga,
Thank you for your quick reply.
Yesterday, I went to the store and bought the exact same cable I used at my friend's place. And voilá, it works perfectly with my monitor. Nontheless, i am still concerned. Although the image and sound are both perfect at the moment, it doesn't seem right that my computer should only work with 1 out of 4 cables. I'm pretty sure something is wrong there.
And yes, I did check the HDMI port for damage. If something is wrong with it, I cant see it. Also, if the port is damaged, I don't understand why it would work perfectly with one of the cables.
Sincerely,
Sebastian

How to setup Time Capsule for wireless backup only

I have a new Time Capsule that I want to set up for wireless backups of both my Macbook Air (with Time Machine) and a Windows Vista laptop. I have an existing home wireless network with my Att/Uverse tv and internet service. I do not want to disturb that network/internet setup.
How do I set up the time capsule to use it for wireless backup only? When I start the Airport utility setup, the first thing it asks is do I want to 1) set up new network, 2) replace existing router, or 3) join existing network.

Thanks. That got me the green light and a message that everything was set up properly. It started it's first Time Machine backup and everything looked good for a while. But now I have a new problem.
The backup failed twice. The first time it had a message that it could no longer find the time capsule, so I had to reset it and go thru the setup procedures again. Started backup again overnight, and this morning it tells me that it failed again. But this time I still have my green light, and the message is "a network problem may have interfered with the backup.
I don't know what else to do with the setup to get it to work. Right now it has started backing up again on its own, so I'll leave it going one more time. (I should tell you that all of this is occurring on my Mac. I have not even started setting it up on the Vista machine. I want to make sure it works on the Mac first). Any advice from anyone who had the same problems with setup would be appreciated.

Itunes times out-cannot establish connection

attempting to download 2.0.1 from itunes, constantly states having trouble downloading iphone software, connection timed out.
Need help

Im downloading 2.0.1 for my ipod touch but it never lasts more than 2 minutes then the network connection times out. Ive paid for it but i cant use it?

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

Lost wireless connection with Lexmark Printer

MBPro with 10.8.1. Lost my wireless connection with X6675 Lexmark printer. How do I reestablish the connection. My router is a Time Machine.

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

Getting wireless connectivity on the printer.

The printer is a HP Photosmart 6510 series. Initial set up (6 months ago) was fine and the printer connected wirelessly to the PC fine. Today something has happened and the computer cannot connect to the printer. I have deinstalled the printer and have tried reinstalling with the original disc but the when the set up asks for the IP address of the printer the process stops.

Hello staffstp.
Please, check this document to know if your printer is still connected to the router.
1. Printing a Network Configuration Page with Photosmart 6510.
2. Getting the latest firmware and product updates.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Manual duplex times out on wireless connectivity only - D5560 printer

Similar Messages

Maybe you are looking for