Manually Added Adhoc Approvers disappears when change the Schopping Cart

Hi All,
We are facing a problem in the Shopping Cart , whenever we are login in to the change mode of check status the manually added approver get disappears.Any point on this will be highly appreciated.
Regards,
Mahesh Mohan D

Hi,
We are manually adding the users , the system is not determining the approvers for some of the cost centers this is basically for giving the option for user to select his/her approver . Here we are manually adding the two levels of approvers .
For the manual approval case we are using Adhoc-Approval workflow.
We have a scenario for a particular account assignment category, the approvers are not determined through the n-step approval badi but are added manually in the approval preview.
In the case when requisitioner changes any data in the shopping cart which is in awaiting approval or which is rejected by any approver and present in requesitioner inbox, the manually added approvers are disappeared and no approvers are displayed in the approval preview and when the workflow is retriggered with no approvers.
Is there anyway we can store the manually added approvers in the case when the requisitioner changes the cart.
Thanks And Regards
Mahesh Mohan D
Edited by: Maheshmohan D on Nov 18, 2008 9:44 AM

Similar Messages

SPL block when changing the Address manually at Sales order level

Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVR

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

Video tracks disappear when changing between sequences in premiere CS6

Dear people, can you please help me find out why video tracks disappear when changing between sequences in premiere CS6.
All it shows is the audio track and it is maximized to the first frame of the sequence. Video tracks are there but hidden - although video IS showing up in the program monitor.
When I pull the tracks down in the timeline window using the dividing line between the video and audio tracks and set the sequence work area back it works fine, however it is a great annoyance having to do this every time when i swap between sequences.
Can anybody please suggest a solution to this?
I'd appreciate any help.
MD

This is the audio tracks problem i cannot overcome:
https://forums.adobe.com/thread/1586025
(basically every type of audio i drop/place onto the timeline becomes left channel only, regardless of it being music or camera-recorded audio.
In the source monitor everything plays back just fine, but when placed to the timeline - it becomes LEFT only.
Weird.... (or am I and not it)

Trouble with Slurs when Changing the Staff Style

Hello,
I'm exploring the LP8 score editor and find that it is VERY impressive!
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
One issue (and maybe I missed this in the manual) that I'm having is changing the staff style for my parts. The manual says that this is an ideal way to print parts because you can change the key, transposition, etc. Writing for full orchestra, this seems (forgive the unintended pun) "Logical."
This issue I'm having is that my slurs do not move with my notes when I change the staff style. For example: let's say I have a theme in a MIDI region that is using the "treble" staff style. I have dynamics and slurs everywhere. Then I want to give this to an Alto Sax so I select the MIDI region and change the staff style to "Alto Sax." While the key signature and the notes change in a very "correct" looking way. The slurs I put in remain in their original locations. This is a bit discouraging because it means a lot of work to fix them before I can print the part out.
I've tried "selecting equal" events in the edit drop down menu. This almost works, but it does not discriminate between slurs up and slurs down.
If someone could please let me know what they do with slurs in general, and especially what they do when creating parts with them that would be great.
Thanks in advance!

Composer_25 wrote:
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
I'm a HUGE advocate of Logic's score editor, but depending on the type of music you're writing you'll find that there are certain things that it just can't do. To this effect, there may be times when it will just be easier to send your music to a Finale/Sibelius copyist to put the finishing touches on your score/parts, i.e., those things that you must have in your score but which Logic can't do, such as wavy-line glissando markings for harp parts, tram marks (for separating systems on a conductor's score), alternative pedal markings for piano, etc. (up/down marks), and others.
Should you ever get to that point, check out a program called PDFtoMusicPro. It will take a PDF file from Logic and translate it into an XML file that can be read by Finale, etc., including slurs, key signatures, dynamic markings, etc. It's pretty fantastic!
This issue I'm having is that my slurs do not move with my notes when I change the staff style... \[snip]
Yup, it's a problem. The best approach is to use the transposing staff styles and do your markup on them. Of course, if you're preparing a C score then none of that matters.

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Locale Input changes on Mac OS X Lion when changing the view state

On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx">
 <fx:Script>
 <![CDATA[
 protected function gototest2(event:MouseEvent):void
 this.currentState = "test2";
 protected function gototest(event:MouseEvent):void
 this.currentState = "test";
 ]]>
 </fx:Script>
 <s:states>
 <s:State name="test" />
 <s:State name="test2" />
 </s:states>
 <s:Button label="go to test" includeIn="test2" click="gototest(event)" />
 <s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
 <s:TextInput includeIn="test2" />
</s:WindowedApplication>

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.

HT201303 For added security how do you change the iphone security number to stop hacking

For added security how do you change the iphone security number to stop hacking

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813

IMac freezes when changing the screen saver

Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)

I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew

Always assets links are missing when changing the location.

Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!

Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal

When changing the drive letter for the ipod itunes still wont come up

when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there

Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.

User Menu Image disappear when update the system menu

Hi all,
We created an user menu after the system menu Sales A/R, with an image as an icon.
And also we changed some of the system menu description.
But the problem is when you change some information from the Admistration menu, the system menu is updated and all the changes we made in the systems menu description and the image of our user menu, disappear.
The system menu description return to the oficial description and our image isn't showed after the system menu update.
Thanks,
Fran.

Dear Francislaine,
There is a very good example which might be helpful in this context; given by SAP which is installed while installing SDK. The sample project is stored in the followng default folder :
C:\Program Files\SAP\SAP Business One SDK\Samples\COM UI DI\VB.NET\UIDIBasicApp
In th above sample project the basic need for adding images to the menu has been addressed.
PS: Would it be possible to change the system menu description before adding the image to the custom menu?
Regards
Arshdeep

Adhoc agents disappear while changing SC upon rejection

When a shopping cart (SC) is rejected by an adhoc approver, the
requisitioner receives a "rejection" email.
When he/she goes to change the SC, the adhoc approver disappears in the
Approval Preview and after "re-ordering" the SC, it goes to the next
approver in-line but not to the ad-hoc approver who rejected the SC.
We are using WS 10000276 (Approval single level over limit).
-Bakulesh

Hi,
Manage BBP_WFL_SECURITY parameter (personalisation on user or role, or with BADI)
4 level possible:
Level 4 (High) - SC modification during approval possible + WF continues
Level 3 (medium) - SC modification during approval possible + WF restarts if starting condition targets a new WF
Level 2 (low) - SC modification during approval possible + WF restarts
Level 1 (no) - SC modification during approval not possible
As soon as your WF restarts or changes the adhoc agents are reset
Hope it helps.
Vadim

Error msg when changing the MRP type in ME22N

Hi,
When i change MRP type from MRP to Manual in ME22N, it will come out the error msg:Purchase request mandatory for MRP generated Purchase order (Application area: ME Message no. ME901)! My question is how to change this error msg to warning msg?
From SPRO-Material Management-Purchasing-Environment Data-Define Attributes of System Messages ,i can not find the entry regarding this issue.
Any suggestion!
Thanks!

Hi,
Sometimes end user want to add some item without PR under MRP PO.
As before system will only indicate the warning msg that we change to error msg three month ago, but i forgot how to change!
thanks!

Table number xrefs disappear when roundtripping the XML doc back to FM

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

Manually Added Adhoc Approvers disappears when change the Schopping Cart

Similar Messages

Maybe you are looking for