Many Sales Order one Production Order

Respected Members,
   I have a small requirement.
         Our Functional consultants make a scenario that many sales order club to give one production order depending on some parameter.
Problem is that at table level ,i am not able to see that how many sales order are clubbed to a specific production order.
I had seen pegged requirements report (tcode MD09) ,in this mrp element no is nothing but sales order no only but this records can be only seen upto u have not done the confirmation.
Once the confirmation  has done it will show no records.
So please tell me in which tables i can see that how many sales orders are clubbed to a specific production order even the confirmation is also over.This is needed to built one report.
Thanks a Lot.
Manish

Hi,
If you are in MTO environment there should be direct connection between your SO and PrdOrd.
But it seems there's a N:1 relation (or N:M relation) between your SOs and PrdOrds. It means that you are in MTS environment...I'm not sure you can create such report - but it's only my opinion...
BR
Csaba

Similar Messages

  • Delevery(Sales invoice) against Production Order

    Dear  All
    In COOIS report can we check the Sales  according to Production order.
    Within a month  can we check the booked sales of that particular order. (Not 1 by 1)
    It should be commulative.
    Rgds
    Pankaj Agarwal

    Pankaj,
    You cannot see these informations in one report
    i.e. sales order qty/delivered qty/production order target qty/GR qty/WIP qty. input being sales order creation date.
    You need to refer to sales order VA05 to get sales order for a perticular month.
    take this sales orders ifrom this report(click on the column and CONTROL C)
    goto COOIS
    in the sales order field, click multiple selection icon click on the green button(import from text file)
    you will get import from local file screen, you click on "upload from clip board" icon...you will get the sasles orders and then you can get the details of thoses production orders for the saales order in that month.

  • Sales order and Production order status

    Hi Colleagues,
    We need to use sales order status functionality, so that when sales manager set status , for example, "dont produce" a production order can not be released.
    Has any one dealt with that?
    Thank you.

    Dear,
    You can give the reason for cancellation  of Sales Order item & block the sales order. When the sales order will get block it will get disappear from MD04 so in next MRP run if there is any planned order it will get deleted. But suppose by that time you had converted the Planned order in Production Order you will get Exception message no. 20 in MD04 list. So this means that there is no requirement & order should be cancel.
    Still you want to have restriction of checking the Sales order is open or not, then i hope you are working in MTO scenario & every production order is created w.r.t SO. You can use following Exit in such case.
    PPCO0021 Enhancement for Order Release
    Exit - EXIT_SAPLCOZR_003.

  • Copy from Sales Order to Production Order

    Hi all,
    Is there a way to copy direct a Sales Order to Production Order (probably for item with BOM).I am using SAP B1 2005
    Thanks in Advance

    Hello,
    Currently you can choose relevant Sales Order from Production Order but only for information purpose.
    I think you can try to use SDK to implement it.
    Hope this helps.
    Regards,
    Maggie An
    SAP Business One Forums Team

  • Any stanard BAPI have both sales order and production order

    hi Experts,
    i need to Identify any standard BAPI have both sales order and production order. If such BAPI is not available, create 'Z' BAPI to do the same.it's my require ment?plz give me suggestion it's useful for my project. i will give good points.
    thanks and regards,
    bbm

    hi eswar,
    can you give me how to do? and what i can use import,export,table and sourcecode bcz i am new in BAPI side even now i am working in SAP XMII project.
    so plz guide me.
    thanks and regards,
    bbm

  • Assign batch number from sale order to production order automatic

    Dear all, I have a question for all. Please help me in this case
    My scenario is make to order
    I have a sale order, when i create sale order, i have assigned batch number at each line item.
    When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
    So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
    So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
    Thanks all

    Hi,
    To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
    In fact , you are following wrong practice for generating batch no.
    Follow procedure like this :
    Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
    While creation / releasing of Production order, you have option to generate batch automatically by following way :
    Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
    > Automatic Batch creation in the order maintain this field as
    1     Automatic batch creation at order creation
    or
    2     Autom. batch creation at order release
    This will generate batch number automatically at the time of creation or release of order.
    Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
    So you will get sales order stock in the form of batch managed.
    Check & revert if any issue in above flow.
    Regards,
    Tejas

  • Collective conversion of planned order to one production order

    Dear all,
    1. I have N number of pld ord for same material so i need to convert as production order with cumulative quantity.
    Because to reduce  Issing and confirming and receiving of number of production orders.
    2. I need to create Number of production order with diffferent material numbers  in one screen with different production order number.
    Because per day i need to create more number of production order with different material number. If i create one by one it will consume more time as well as its not practical possible for our business scenario.
    Pls let me know any standards are available in SAP.
    Regards,
    S.Suresh.

    Dear Suresh,
    You can convert Planned Orders into Production order collectively as a mass maintanance in CO41 Tcode.
    Revert if any doubt in case using above tcode.
    Further if you wish to have one production order against multiple planned orders it is not possible as per Standard SAP.
    You can convert to each planned order into individual production order not to single production order.
    If you wish clubbed production order then better you use Individual / Collective Indicator  as
    2     Collective requirements only
    Then you will get cumulative planned orders only against each material and you can convert all of them cumulatively to production orders in CO41 as a mass maintanance.
    Hope your problem resolves.
    Regards,
    Tejas
    Regards,
    Tejas

  • Rescheduling Sales Order vs Production Order (Components)

    Hi gurus,
    Transaction V_RA rescheduling sales order with different filters.
    We need a transaction similar to V_RA that rescheduling sales order and production order (for availability check of components). Does it exist??
    I will reward points to all answers!
    Thank you!

    Daniel,
    It all depends on the business policy of each client. In our case, it was decided that in case Production orders and Sales orders compete for the same material, we will give priority to sales orders. Hence, we changed the timings of the nightly jobs. The backorder job was run first, so that stock was committed there first. Balance if any could go to Prod orders.
    But again, that depends on the strategy of your company.
    Ashutosh

  • Relation between Sales order and Production order

    Hi,
    In Make to stock scenario how the relation between Sales order and production order are related.In which table we will get the related fields (expect AUFK,VBAK,AUFO).
    warm regards,
    Surendar reddy.

    The relation between sales order and prodution order  is as follows.
    Pass AUFNR to AFKO/AFPO  Get AUFPL.
    Pass AUFPL to AFVC Get BANFN.
    Pass BANFn to EBAN Get EBELN.
    Hope this works .
    Cheers,
    Lakshmi Prasanna Gandham

  • List of Sales order and production order

    I need the list of sales order and production order for the period 01.04.2006 to 31.12.2006

    Dear Nau,
    VA05 for list of sales orders and put Document date in Sales Order Data
    COIO Process order information System
    Regards,
    Rakesh
    Pls award points if you find the solution

  • Transfer addition information from Sales Order to Production Order

    Hi,
    In MTO we need to transfer addition information from sales order to production order, such as OUTER DIAMETER and INNER DIAMETER of the product.
    Regards,
    Ahmed

    Hi Ahmed,
    Specific information from sales order in MTO process if you want to pass onto the production order then as suggested by expert production memo can be used.
    Follow below steps.
    Select the item in the sales order and  Goto -> Item -> Text as displayed below
      Create a production memo by specifying the language key as displayed below.
    Once you create production order against the sales order - In production order you can see the text maintained. CO02-Menu Bar - Header -Production Memo
    Thanks & Regards,
    Ramagiri

  • Overhead rate maintained sales order aswellas production order

    Hi Guru,s
    My Client using overhead rates in a particular costsheet for SD and PP.The overhead rate maintained a particular profit center.these particular profit center maintained sales order aswellas production order.In this case we need to calculate costing for sales order only for this profit center not production order.Any setting required to ovecome this problem.Could you plz help on this regards,
    Thanks&Regards,
    Prakash.

    Hi,
    There is no specific setting is reqd. If u want to calculate the overheads for production, then u need to define the base % and the overhead key. But in sales order you need to maintain the condition type. This will take care of your reqmt.
    Regards,
    V. Suresh

  • How can we tell the client that use process order or production order (proc

    Dear guru,
    My question on what reason we can tell the client that u have to use process order or production order .
    On what scenario we suggest client that use process order or production order

    Hi,
    Process manufacturing is primarily designed for the chemical, pharmaceutical, food and beverage industries as well as the batch-oriented electronics industry
    Discrete manufacturing is u201Cthe production of distinct items such as automobiles, appliances, or computers,u201D whereas process manufacturing covers u201Cproduction that adds value by mixing, separating, forming, and/or performing chemical reactions. It may be done in either batch or continuous mode.u201D
    Letu2019s think about what your company manufactures. Does it require mixing chemicals? If so, you may need an ERP system that does things like calculate ingredient quantities.
    If your company assembles products from many component parts, youu2019ll require discrete manufacturing functionality
    Other approach:
    If the finish good cannot return back to its basic components, your manufacturing is Process. For instance, the finish good is a can of soda. It cannot return back to its basic components such as carbonated water, potassium benzoate, aspartame, citric acid, and other ingredients. But if the finish good is car or computer, your manufacturing process is Discrete because it can be disassembled and the parts, to a large extent, can be returned to stock. Therefore Bill of Material (BOM) of discrete manufacturing consists of component parts for assembly while Process manufacturing consist of formulas, recipes and other ingredients
    Process manufacturing is scalable. If a formula calls for 1,000 pounds of cake flour, but you only have 500 pounds, you can still bake cakesu2014just not as many. Conversely, in discrete manufacturing, one missing part means waiting for it before the finished assembly unit can start rolling off the production line
    The obligatory requisite for process manufacturing is Lot Potency and Shelf Life where as discrete manufacturing values Serial Numbers, ECNu2019s and assembles.
    If it is discrete manufacturing ---go for Production order
    If it is process manufacturing ---go for process order
    thanks and regards
    Venkat V

  • Open planned orders and production orders

    Hi friends,
    I have one issue with my client.
    Client has 1 lac materials in sap .Now he wants extract all materials open planned orders and open production orders with quantity and dates.
    Please tell me the process how i can extract the data from sap for above requirement.
    Thanks,
    Manoj

    Hi Manoj,
    For open planned order and production order select the respective box.
    But one suggestion. Try to convince client that this report will take a lot of time as you have mentioned 1 lac materials are there.
    You can exclude system status and get it with below screen as mentioned already.
    But my suggestion is to run the report at night when the system load is very less. Please create a background job one for planned order and another for production order. Then run it in midnight as per the customer requirement in background. You can automate the process by sending automatic mail to customer. Please refer the below link to trigger mail.
    Mail Trigger with TEXT file via JOB run
    Regards,
    Krishnendu.

  • Error while converting planned order to production order for config materia

    Hi experts,
    While converting a planned order to production order for a configurable material.I am getting the following error meassage. Message No.CO684,
    "You cannot make an assignment to make-to-order stock"
    ( DiagnosisThe component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
    A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistant.
    System ResponseThe following responses are possible:
    Order processing is cancelled.
    The system resets the special stock indicator back to the original value.
    Procedure
    Choose another order type).
    I have checked some of the threads related to this error. But no where there is any solution.Please tell me if there is any settings to make so as to work on this scenario.
    Thanks,
    Sham

    Hi,
    This will be a MTO scenario. Please check your requirement type,Requirement class and strategy type config along with your Item category and schedule line category from SD.
    Also check your Production order type config and settlement profiles.
    I mean to say that you need new production order type to be configured for specific above mentioned combination.
    Are you working on a production system..?? is it the first time you are creating the order for this config material..??
    Regards,

Maybe you are looking for