Map not recognized during runtime

While running a test (during runtime), the map is not being recognized
by the system. We have cleared SLD Cache in IR and ID, and using
SXI_CACHE several times and during runtime we still get the following
error about the map not being found. The error is as follows:
Runtime error Unable to find resource a1ebddd0-0d05-11dd-a1d7-
eecb0a0a3d7e in the following software component versions:
urn:ariba.com:xi:Procurement:CreatePurchaseOrdercom/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestM~-1
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace><Trace level="3" type="T">Mapping already defined in interface
determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping
15D05B740F5D39BCBACC32BCA4E1FCE7 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping
A1EBDDD00D0511DDA1D7EECB0A0A3D7E </Trace>
<Trace level="1" type="T">Interface Mapping
urn:ariba.com:xi:Procurement:CreatePurchaseOrder
IFM_TX_WSPurchaseOrderPush_2_Z_ARIBA_KT_PO_CREATE </Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_ </Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the
Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="2" type="T">Mode 0 </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class
(urn:ariba.com:xi:Procurement:CreatePurchaseOrder, -1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e. </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class (-1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
without namespace. </Trace>
<Trace level="1" type="T">Unable to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
Thrown:
com.sap.aii.ib.core.mapping.execution.ResourceNotFoundException: Unable
to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
at com.sap.aii.ib.server.mapping.execution.JavaMapping.load
(JavaMapping.java:148)
at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep
(JavaMapping.java:67)
at com.sap.aii.ib.server.mapping.execution.Mapping.execute
(Mapping.java:60)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:87)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:71)
at
com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:119)
at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest
(MappingRequestHandler.java:72)
at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction
(MappingServiceImpl.java:79)
at sun.reflect.GeneratedMethodAccessor511.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke
(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy279.processFunction(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183)
at
com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:182)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:280)
</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>

In which system you are facing this problem?
If it is Developement system then do the following steps and then try again.
1. In your interface mapping remove the message mapping first and then activate the interface mapping.
2. Do some dummy change in your message mapping or rename the message mapping by copying it and activate it.
3. Now use this message mapping in your interface mapping and activate IM.
If it doesn't work delete all objects and recreate them. (or may be rename them ).
One more important thing... Check your Interface Determination and make sure the outbound & inbound message interfaces are exactly same as used in Interface Mapping.

Similar Messages

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Enhancement not visible during runtime

Dear experts,
I have a problem with getting enhancements up and running in runtime.
I Changed 2 enhancements in FM J_1B_NF_VALUE_DETERMINATION and activated them. Activation goes fine, but for some reason during runtime (in debug mode), I can not see the code of the enhancement at all. My changes are not triggered, I can not even see the code in debug-mode. The complete code-block is missing. It seems that the enhancements are not active and are just not embedded during runtime. Do I have to activate something else? I guess CMOD and SMOD are not relevant in this case but if they are please let me know.
Thanks in advance
William

if you are usng enhancement framework then there is no need of CMOD/SMOD.
where have you created your enhancement spots? and what type have you given there?
goto SE19 and see what actually is the status of the enhancement .. if active, keep breakpoint directly inside your enhancement coding,
when FM starts executing, you will find a circular swirl(just on the left side of the code ), that mean it will goto your enhancement. it wont direcly show in the deugger, you press F5 and then it will go inside your code.

ABAP Mapping: No MESSAGE_OUT during runtime. test OK

Hi everybody,
I got a ABAP-Mapping.
During runtime I get noch MESSAGE_OUT (empty!)
But when I test the ABAP-Mapping, everything is fine!
Any ideas?
Regards Mario
Edited by: Mario Müller on Sep 11, 2008 9:09 AM

Thanks,
found it.
Regards Mario

Subclass instance not created during runtime

Hi Experts,
For an existing standard class a subclass was created and during runtime the me object reference points to the subclass name there by allowing the subclass additional/custom methods to be triggered.
We have done service pack upgrade in the system and during runtime I find the subclass does not exist in the me object reference due to which the custom code in the subclass is not being called.
How do I fix the above issue so that and subclass instance is created by the superclass during runtime?

Hello Srinivas,
I had put a breakpoint to debug in the subclass which was being invoked.
In the new system where the service pack has been applied I have put breakpoint in the same method but the subclass method is not being called.
The superclass method is being called. I'm sure after facing this problem(and solving it, of course) you'll have a better understanding of the 'polymorphic' behaviour of objects
if the subclass inherits superclass the instance will be created automatically?
NO!!!
You must understand none of us has a crystal ball where we can gaze & find out the solution. If you want valuable responses please provide as much info as possible.
BR,
Suhas

USB not recognized during restore

Trouble with upgrading software, the process hangs in the restore, keep getting error 1604, wondering if the USB is getting reset in the restore process? I have turned off the virus protections,etc. so that should not be the problem.

Here is an extract from the apple site dealing 1604. Hope it helps.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Here is the link to the full article
http://support.apple.com/kb/TS1275

Scsi controller not recognized during ftp install

Hi all,
As you can tell, this is my first post and my first attemp to install arch. I downloaded the latest ftp install floppies "Arch Linux 0.5 (Nova)" and I am trying to install arch on a PII system with and Adaptec 2940UW controller and no cdrom. I can boot from Tom's recue disk:
http://www.toms.net/rb/
and the controller is recognized and I can use fdisk to partition the drive.
However, when I boot from the arch install floppies, the controller is not recognized. When I manually load the module for the controller, ie. aic7xxx, lsmod shows it as unused.
After looking at the boot log using dmesg, I noticed the following, which I don't understand:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2
Is this a kernel issue and does anyone have any pointers for me?
Thanks
Kevin
PS: I tried my best to search for a related topic.

Thanks for the reply. It still doesn't work for me.
I noticed that the floppy images have been updated -- the md5sum's have changed. I will give them a try.
As an aside, the listed md5sum's for the new images don't match the downloads. I downloaded from several mirrors and I get the same sums, which don't match the sums listed.
$ md5sum *.img
99683b5a119e6332cd8f2185a24083cf boot.img
d2501030749fa2629582de1f02846056 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
$ cat md5sums
2d172ab879f1487f0a381cf432173c26 boot.img
ce6408f0e4051656ddf9c2df3356f1f8 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
Thanks
Kevin

Interface mapping not found at runtime.

Hi all,
For the idoc to idoc scenario i was getting an error
Runtime error
Unable to read the payload from the message object
I have cleared the sld cache and also checked in SXI_CACHE to check the mapping at runtime .I m unable to understand where the problem lies.
Can anyone help?
Regards,
Shrita.

Hi,
Please check you message first properly all conditions supporting or not.Is message is having any exceptional chars , and Check whether your are using Async or Synch communication , respectivly the sender and receiver communication mode supporting both sides. and check your J2EE is working fine or not, Check your interface is having the module processors in sender side/receiver side is yes , those are working fine or not , those are properly imported properly or not.
these diffects may not effect the activation of components.
Also check your receiver Business system is working fine or not
And also check your receiver agreement is configured,receiver determination and interface determination all are refered same business systems or not.
,please see the following threads
Error RCVR_DETERMINATION
No Receiver Determination
Re: NO_RECEIVER_CASE_ASYNC
XPATH and RECEIVER DETERMINATION
XI 3.0 No receiver could be determined
Regards
Chilla..

XSL newline not working during runtime

Hello,
I have this in my XSL to insert newline during transformation.
<xsl:variable name="break">
<xsl:text>
</xsl:text>
</xsl:variable>
It inserts newline when try "Test" from the XSL in JDeveloper.
However, when I deploy the application to the server and test it, the newline is not coming up in runtime. I am using Oracle JDeveloper 11g(11.1.1.4.0) to create the SOA application and Oracle SOA Suite 11g as my SOA domain server
Any one came across this, please suggest a solution or workaround.

Hi,
To add line breaks, you need to use '
' in the xsl:value-of. Try the below:
<xsl:variable name="Test">
<xsl:value-of select="concat('','
','')"/>
</xsl:variable>
-AR

Speakers not recognized during te

Hello, I have a X-Fi XtremeMusic soundcard and Klipsch 5. Promedia setup for my computer. I recently moved, and when I reassembled my computer & speaker system the rear speakers were not responding when I tested them in both the THX setup as well as the creative speaker connection wizard. Nonetheless, when I play music sound is emitted from all speakers. The speaker system works, but the problem with the testing still bothers me. I could rearrange the speakers and guess which ones are the front speakers by the amount of noise they emit during a song, but I would much rather determine which speakers are which by the proper software tests. I've reset my speaker system and have the latest drivers for the card. Any help/suggestions are appreciated. Thanks. -Dom

Dom,
Others have reported similar issue when they have certain logitech webcam installed in their system. If you do have these webcam, perhaps you can looking into this faq from logitech.
http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=527
Jason

WRT54g not recognized during setup

I am trying to setup the WRT54G wireless router but for some reason the computers will not recognize it.
I tried the routers page 192.168.1.1 and that did not work. I tried easy link and that could not detect the router. When i use the CD it give me a router error during the checking status state of the setup.
any ideas on what the problem could be?
thanks

To worm1028 ---
You need to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

[SOLVED (mysteriously)] Arch on USB not recognized during boot

Hi there,
I hope, someone can help me with my problem, I have been searching and trying different things for quite some time now, without success.
I treated myself a new Notebook, Acer Aspire S7 and wanted to run Arch on it. However I am new to Linux and want to try it out on an USB-Stick, to keep the factory install of Win8 intact. (Also, this notebook does not have such a great HDD capacity) Additionally I want to have full disk encryption.
So I followed the Beginner's Guide with modifications described here and here
When it came to install the bootloader I chose Grub for EFI.
I then removed the USB-Stick with the live-Arch, which I used for installation and rebooted and it worked!
However: As soon as I completely shut down and boot again, the USB-Stick with my installation is no longer recognized. If i boot the live-Arch again, reinstall Grub and then reboot, it again works.
Here is something, I found strange. This is the output of efibootmgr:
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,0003,0002,2002,2003
Boot0000* USB HDD: KingstonDataTraveler 2.0
Boot0001* Intel HDD0
Boot0002* Windows Boot Manager
Boot0003* arch_grub
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
BootCurrent is 0000, but that number does not appear in the Boot-Order list. Could that be something?
Well, I hope someone has an idea. I will happily share any information about my setup with you, just ask.
Thanks,
Max
Last edited by MaxT (2014-04-07 08:35:20)

Sorry for digging that threat up again. I just wanted to share with you the solution to the problem I was having. Perhaps it will save someone else some frustration.
The Acer Aspire S7 has a dongle that goes in the display port and provides an ethernet and an VGA port. It was that dongle that prevented the USB stick with the Arch installation from being recognized. Done attached -> USB stick was ignored, dongle detached -> it worked.
I have no idea, why that is the case, but maybe this info is helpful for someone.
Cheers,
Max

Menu Not Found during Runtime

Dear Colleague,
My customer attempted to run the new version of the Oracle 9i Forms application that I developed for him. He successfully started the initial form, but the referenced menu file within the initial form is not found. There is no path included in the reference to the menu module within the property sheet, only the file name of the menu.
Currently, the MMX-file is in the same directory as the initial FMX-file that references the MMX-file.
Which parameter or configuration file must one change for the menu file to be found and used within the context of Oracle 9i AS?
Best regards,
Randy

If you're running a Unix/Linux server; please keep in mind filenames are case-sensitive! So if in the FMB a menu is attached with the name "MyMenu" and you have MYMENU.MMX on the filesystem it will not be found! You can check what the filename is in the FMB by converting it to FMT.
Tim

SID not recognized during install

When installing the OID choice from the 8.1.7 NT installation disk, the OID installer will not recognize the SID of the existing database, variations of the TNSnames configuration have yeilded no result.
I cannot get OID installed at all under 2000.
Thanks
Rob

Is it possible that you have removed all or some of the
registries for the database instance you are trying to install
to?
Is there any reason why you can't install OID in a new instance
by itself. If you do a default installation of OID it will create
a new isntance for you.

Init context node during runtime

Hi together,
i have a question concerning initialization of a context node during runtime.
I designed my context like
Parent
Child1 Child2 Child3
The parent node is the only one where the attribute boldInitialization Lead Selectionbold s marked.
But now, its not possible to bind data to the child nodes, because they not existing during runtime.
Now my question. Which method is the best to init these child nodes when data are ready for them?
Regards,
Anton

Hi Abhi,
problem is, that the supply function are executed at the first time the context nodes are used. In my web dynpro application ist that during initializing the view.
So the supply functions are called at a moment where no data are available for them, because the tree view, to which they are binded, is also loaded at init method.
So in the supply methods are no data bind to the nodes and the application didn`t create them.
And when i want to fill data to the nodes they didn`t exist.
Regards,
Anton

Map not recognized during runtime

Similar Messages

Maybe you are looking for