Mapi over HTTP issue

Hi all!
Hope somebody can help me out. In my test lab, where I`m experimenting with Exchange 2013 SP1 and Outlook 2013 SP1 I came across very annoying thing.
Let me explain a little bit more about config that worked.
Outlook 2013 connected to Exchange 2013 via RPC over HTTPS is working great actually really great. I have created my own certs and imported ROOT CA cert to all of my machines and things are working peachy. As part of my plans for 2014 I have to test and
deploy MAPI over HTTP sometime at the end of 2014 in our company (and migrate fromEX2007 but this is different story).
OK so I`ve enabled MAPI over HTTP on my test server and configured 5 virtual machines with different accounts to test things out. Started Outlooks, accepted "Your administrator has made change ....." prompts and here we go, I`m connected MAPI/HTTP
and all works really great.
Except for one thing. When it does connect, things are super fast and it works as it should. But sometimes it does not connect right away and it is sluggish in performance. Also Outlook is missing "Quick steps" menu, see attached image:
I restarted all servers, clients, clean Outlook install nothing helps.
When RPC/HTTPS I could quit and start Outlook 10 times and it worked 10/10 without problems.
When MAPI/HTTP I restart outlook and it works 6/10, so 4 times I get messed up Outlook and very poor performance.
Any idea where to start troubleshooting? Maybe Outlook has a bug or 2 with this mode?
Server is correctly sized and backed up by enough of memory and CPU, mailboxes have 100-3500 items in them.
Again, RPC/HTTPS works every time without any problem.
MAPI/HTTP works lets say 6 times without any prolem at all and really works great but 4 times out of 10 it makes me want to throw it away :)
If someone knows best way to troubleshoot this one, please let me know.
Regards,
G

Hi,
From your information, when Outlook hang on PC A, there was no problem to connect at the same time from computer B, so the client side related issue causing this problem is more likely. For
example, when Outlook was trying to connect to Exchange server, it fails due to the temporary Network issue, or it hang when loading something. As far as I know, it may also be caused by the local OST file. But it is difficult to do troubleshooting since there
could be many possible causes and more logs may be required to do troubleshooting.
Please try to run Outlook in safe mode by running "Outlook.exe /safe", see if we can reproduce this issue.
Thanks
Jessie

Similar Messages

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

Exchange 2013 SP1 - Unable to test Mapi-over-HTTP Outlook Connectivity

I've configured MAPI over HTTP in my testing environment. It is working fine. But i'm unable to test this configuration using the Powershell Test-OutlookConnectivity CMDlet.
Outlook is working fine and is using MAPI over HTTP, so i'm pretty sure there are no configuration problems. But the CMD-let gives me the following output:
[PS] C:\Windows\system32>Test-OutlookConnectivity -RunFromServerId <myserver> -ProbeIdentity OutlookMapiHttpSelfTestProbe
WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for
invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id 241.
Failed to find the probe result for invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id
241.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], InvalidOperationException
    + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Exchange.Management.Tasks.TestOutlookConnecti
   vity
    + PSComputerName        : <fqdn of my serer>
Does anyone have a sollution for this?

Hello @all,
I got the same issue. The configuration is functional (Outlook connects over http). But the test-cmdlet raises this error. Is there any solution?
Greetings from Germany

Troubleshooting for RPC over https (Outlook Anywhere) connection issue

RPC over https (ROH), well known as Outlook Anywhere, is more frequently used. Even in Exchange 2013, Outlook no longer connects CAS server via MAPI.
In this thread, we will discuss about the troubleshoot checklist about the RPC over https (Outlook Anywhere) connection issue. In order to make it more logical, I’d like to divide the whole troubleshooting to the following processes:
1. Client side to CAS side
2. CAS side to MBX side
[Issues between Client side to CAS side]
In Exchange 2013, Outlook Anywhere is enabled by default. Different from this, Outlook Anywhere in Exchange 2007 and 2010 need to be manually enabled. Thus, please firstly check if the RPC over HTTP component has been installed:
Click Start, and then click Control Panel.
Double-click Programs and Features.
In the left pane of Server Manager, click Features.
In the right pane, click Add Features.
Check if the RPC over HTTP component has been selected.
If the ROH connectivity issue only happens on certain users, the property MAPIBlockOutlookRpcHTTP can be checked:
Get-CASMailbox name | fl MAPIBlockOutlookRpcHttp
2. Confirm if Exchange server is blocked. Ping the Exchange server FQDN on client machine and confirm if it can return the proper IP address.
3. Check if the RPC Proxy server is responding correctly:
rpcping -t ncacn_http -s ExchServer -o RpcProxy=RPCProxyServer -P "user,domain,*" -I "user,domain,*" -H 2 -u 10 -a connect -F 3 -v 3 -E -R none
If 200 code returns, the test is successful.
4. Check if Outlook Anywhere host names are added in the certificate:
To get host names, the following command can be used: get-outlookanywhere |fl *hostname
5. To use the Shell to test Outlook Anywhere connectivity, use the
Test-OutlookConnectivity cmdlet.
[Issues between CAS side to Mailbox side][RZ1]
A. Check if it can connect to store’s port:
RpcPing –t ncacn_http –s ExchangeMBXServer -o RpcProxy=RpcProxyServer -P "user,domain,password" -I "user,domain,password" -H 1 –F 3 –a connect –u 10 –v 3 –e 6001
If it returns as following: Completed 1 calls in 60 ms 16 T/S or 60.000 ms/T, it means the RPC Ping Utility test succeeds.
B. Check if it can Connect to DsProxy Service:
RpcPing –t ncacn_http –s ExchangeMBXServer -o RpcProxy=RpcProxyServer -P "user,domain,password" -I "user,domain,password" -H 2 –F 2 –a connect –u 10 –v 3 –e 6004
If it returns as following: Completed 1 calls in 60 ms 16 T/S or 60.000 ms/T, it means the RPC Ping Utility test succeeds.
C. Check the following registries:
[Disable the auto update]
1).Open Regedit and navigate to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeServiceHost\RpcHttpConfigurator\RpcHttpConfigurator
2).Set the PeriodicPollingMinutes value to 0.
[Check the RpcProxy ValidPorts]
1).On the RPC proxy server, start Registry Editor (Regedit).
2). In the console tree, locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy
3). In the details pane, right-click the ValidPorts subkey, and then click Modify.
4). In Edit String, in the Value data box, type the following information:
ExchangeServer :6001-6002; ExchangeServerFQDN :6001-6002; ExchangeServer :6004; ExchangeServerFQDN :6004
Note:
ExchangeServer is the NetBIOS name of your Exchange server. ExchangeServerFQDN is the fully qualified domain name (FQDN) of your Exchange server. If the FQDN that is used to access the server from the Internet differs from the internal FQDN, you must use
the internal FQDN.
[Check the 6004 port settings in registry]
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeSA\Parameters
Value name: HTTP Port
Value type: REG_DWORD
Value data: 0x1772 (Decimal 6002)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeSA\Parameters
Value name: Rpc/HTTP NSPI Port
Value type: REG_DWORD
Value data: 0x1774 (Decimal 6004)
D. Check if the RPC ports are used by other applications instead of Exchange by using : netstat –o
Then it will return all active TCP connections and the process ID (PID) for each connection.
After that, please check the application based on the PID on the Processes tab in Windows Task Manager and confirm if it’s Exchange server.
Additionally, ExRCA is a perfect tool to test the whole connection between client side and Mailbox side:
https://testconnectivity.microsoft.com/
1. On the ExRCA website, under Microsoft Office Outlook Connectivity Tests, select Outlook connectivity, and then select Next at the bottom of the page.
2. Enter the required information on the next screen, including email address, domain and user name, and password.
3. Choose whether to use Autodiscover to detect server settings or to manually specify server settings.
4. Accept the disclaimer, enter the verification code, and then select Verify.
5. Select Perform Test.
<Resource for reference>
How does Outlook Anywhere work (and not work):
http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx
How to use the RPC Ping utility to troubleshoot connectivity issues with the Exchange over the Internet feature in Outlook 2007 and in Outlook 2003:
http://support.microsoft.com/kb/831051
Test Outlook Anywhere Connectivity:
http://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
[RZ1]It’s part, please re-layout
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I've just restored the M11 to Windows XP with the disks provided and Outlook Anywhere connected without issue. As strange as it sounds, this looks to be isolated to this particular model of laptop and Windows 7.
I've used the same Enterprise copy of Windows 7 and Office on a variety of laptops and pc's and none have come across this problem. The only commonality I can see is the hardware and OS.
Aftery trying to troubleshoot this unsuccessfully with Microsoft tech support for a few hours, they eluded to the fact that this +could+ be a hardware related problem. (driver, adapter properties, etc)

HTTPS with Applet over Proxy Issue

An applet using HttpURLConnection within a Java Applet. The Connection is formulated as follows:
HttpURLConnection urlConn = (HttpURLConnection)destURL
.openConnection( );
urlConn.setDoOutput( true );
urlConn.setDoInput( true );
urlConn.setUseCaches( false );
urlConn.setAllowUserInteraction( false );
urlConn.setRequestProperty( "Content-type","multipart/form-data" );
urlConn.setRequestProperty( "Content-length","" + parameters.length( );This works fine with numerous proxy servers and other network
topologies, except one. The issue I am told occurs when we are trying to
connect over https. For background, my understanding is this causes the Java Plug-in to :
* invoke the http CONNECT command
* wait for the 200 OK indicating that the secure tunnel is established
* then send the request securely.
Doing a packet trace shows that the headers set in the code are
actually being included with the CONNECT. However the Java Plug
(1.4.2_06) does not sent the body with the CONNECT. I am told this
causes the proxy to wait for an entity that never arrives, because, on
the other end, the plug-in is waiting for 200 OK. After 8 secs the
plug-in resets the connection and fails.
Packet traces on other proxies show the same content-length header being
included, but they decide ignore it. From Googling I note some folks
claim that this is expected, because CONNECT is non-entity enclosing.
Doc's are scant on the CONNECT command. In some cases they seem to imply
that no data should go with the CONNECT (making it non-entity
enclosing), but later they state it supports data-pipelining, making the
content-length relevant, as the CONNECT may well contain an entity.
Moreover, is the intent of Applet Framework to insulate the programmer
from having to worry about issues like this? For example this Applet can
and does connect to a myriad of HTTP/1.1 or 1.0 server through a proxy
or not; in the case of no proxy or non secure proxy, the content-length
header is valid as the request goes out in one go with associated
headers. So writing the code as above, does not seem to be inherently
flawed, IMO. <-- And that is a question too :).
I note there is an isProxy() method, but this can only be determined
after connection (obviously) and parameters cannot be changed once the
connection is made. So creating a dummy connection first is possible I
suppose, but it seems a slippery slope to start coding for exceptions
like this, unless absolutely necessary.
On the face of it, it could be argued that this appears to be a bug in
the plug-in but with very little hits in google I am doubtful. To that
end, does anyone have any thoughts or experience with either working
around the problem (it would seem to be a pity to have to have a setting
per client), or whether in fact this proxy server is being too draconian
in its interpretation.
Thanks in advance,
Gary
Refs:
RFC2616
http://www.web-cache.com/Writings/Internet-Drafts/draft-luotonen-web-proxy-tunneling-01.txt

Pardon my ignorance about proxies, but how do you tell the plug-in that there is a proxy in between you and the destination?
The reason I ask is because with the https protocol, the first thing that happens is that an SSL connection is set up between the endpoints, and only after, through this secure tunnel, is the GET request or whatever sent. The proxy never gets to see any of the HTTP headers.

Design Choices and is LiveCycle needed? best practices for using RTMP/AMF over HTTP/XML communicatio

Hi,
I am new to flex/RIA. I am exploring different design choices especially in client server communication. On client side we will be using Flash based RIA (using Actions scripts).
There will be some simple forms (like for login, registration, payments etc) and some simple reports including with several graphs and charts. Each chart might have 1000 to 1500 data points etc. There are not video or audio content as such. On server side we have Servlets, java API and some EJBs to provide the business logic and real time prices/content (price update is usually every 10 seconds) /data. Some of the content will be static as well.
I have following questions in my mind. Is it worth it to use RTMP/AMF channels for the followings?
1. For simple forms processing (Mapping Actions scripts classes to Java classes). Like to display/retrieve/update data for/from registration forms.
a. If yes, why? Am I going to be stuck with LCDS? Is it worth it? What could be the cons for heavy usage/traffic scenarios
b. If not what are the alternates? Should I create the web services? Or only servlets are sufficient (ie. Only HTTP+Java based server side with no LCDS+RTMP+AMF)? All forms need to communicate on secure channel.
2. For pushing the real time prices/content which we may need to update every 15 seconds on user interface using graphs and charts. Can I do it with some standard J2EE/JMS way with RIA (Flex) on front-end? i.e. Flash application will keep pulling data from some topic. Data can be updated after few secs or few minutes which cant be predicted.
3. Are there any scalability issues for using RTMP? What happens if concurrent users increase 10 times within a year?
4. What are the real advantages of using RTMP/AMF instead of simple HTTP/HTTPS probably using xml based objects
5. Do I need to use LCDS if I am using AMF only on client side? Basically I mean if I am sending an object in form of xml from a servlet. Can some technology in Flash (probably AMF) in client side map it an Action script object?
6. What are the primary advantages of using LCDS in a system? Is there any alternate solutions? Can I use some standard solutions for data push technologies?
I would like that my server side implementation can be used by multiple types of clients e.g. RIA browser based, mobile based, third party software (any technology) etc.
I appreciate if you can kindly refer me to some reading materials which can help me deciding the above. If this is not the right place to post this message then please do refer me to the place where I can post such questions.
Thanks and Kind regards,
Jalal

Hi Jalal,
Let me see if I can help with some of your questions
1. Yes, you can use LCDS for simple forms processing. Any time you want to
move data between the Flex client and the server, LCDS (or its free Open
source cousin BlazeDS) is going to help. I would expect you would use the
mx:RemoteObject MXML tag to invoke server side code, passing it the form
data input by the application user.
2. If you need to push near real-time data, LCDS gives you the RTMP channel
which can scale quite nicely. You can then use the mx:Consumer MXML tag to
subscribe the clients to the messages, which can come from almost anywhere,
include JMS topics or queues.
3. RTMP (included in LCDS) is the best option for scaling to tens of
thousands of users and the LCDS servers can be clustered to proved better
scaling.
4. The AMF3 protocol used over the RTMP channels performs much faster than
simple XML over HTTP. See this blog posting for some tests:
http://www.jamesward.org/census/.
5. If you are sending a Flex application XML, then I would recommend using
the E4X API to work with the XML. This is a pretty nice and powerful way to
work with XML. If you want Actionscript objects (and probably better
performance), then using AMF serialization to Actionscript objects is the
way to go.
6. Primary advantages? There are many, but mainly you can avoid thinking
about the plumbing and concentrate on solving your application and business
logic problems.
Hope this helps you a little
Tom Jordahl
Adobe

MapViewer 11g over https problem - how to solve ?!?

Hi,
anyone able to access mapviewer 11 g deployed on standalone OC4J 10.1.3.4 over Https ?
Namelly, the following link works:
https://localhost/mapviewer/
_but, going on the 'Demos' tab, and clicking on the 'maps and faces' link ( https://localhost/mapviewer/faces/fsmc/oraclemaps.jspx ) - produces the following javascript error:
[Exception... "Access to restricted URI denied" code: "1012" nsresult: "0x805303f4 (NS_ERROR_DOM_BAD_URI)" location: "https://localhost/mapviewer/fsmc/jslib/oraclemaps.js Line: 6497"]Anyone able to access mapviewer (deployed on any server) over https ?

MapViewer works over HTTPS with some minor configuration changes. First, you may need to tell MapViewer to return generated map image URLS in the form of "https://...", which is done in the config file mapViewerConfig.xml through the <save_images_at> element.
From the error message it does seem to indicate maybe the JavaScript API (oraclemaps.js) is being loaded from "http://" while the web page itself is accessed via "https://" and browser thinks they are two different domains. Maybe you can change how the JS library is loaded in your page and see if that fixes the issue?

RPC over HTTP trouble Exchange 2013/2007 coexistence, 2013 RPCProxy cannot ping GC.

I currently have an Exchange 2013/2007 coexistence scenario which gives me trouble with the RPC over HTTP part with users with a 2007 mailbox. the MS RCA website performs 2 tests with the MAPI address book endpoints, once against a 2007 mailbox server and
once a against a GC/DC, the last one fails. The logs are from our test domain, but the exact same happens in the production domain. running CU8 (recently upgraded, but problem was exactly the same with CU7)
Testing the MAPI Address Book endpoint on the Exchange server.
The address book endpoint was tested successfully.
Additional Details
Elapsed Time: 7872 ms.
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: exmb11.domain.test:6004.
The endpoint was pinged successfully.
Additional Details
The endpoint responded in 156 ms.
Elapsed Time: 4153 ms.
Testing the MAPI Address Book endpoint on the Exchange server.
An error occurred while testing the address book endpoint.
Additional Details
Elapsed Time: 3079 ms.
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: tdc01421.domain.test:6004.
The attempt to ping the endpoint failed.
<label for="testSelectWizard_ctl12_ctl06_ctl02_ctl09_ctl00_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 3079 ms.
texmb11 = ex2007 mailbox
texfr11 = ex2007 CAS
tdc01421 = DC/GC
texch31 = 2013 multirole
other symptoms :
Browser test
https://texch31.domain.test/rpc/rpcproxy.dll?texmb11:6004
--> 503 (which is correct)
https://texch31.domain.test/rpc/rpcproxy.dll?tdc01421:6004
--> 404.0 Not Found
RPCPing
rpcping -t ncacn_http -s texmb11 -o RpcProxy=texch31.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success
rpcping -t ncacn_http -s tdc01421 -o RpcProxy=texch31.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Fails!
so the Ex2013 RPCProxy doesn't proxy to the DC/GC, but the RPCProxy to an ex2007 mailbox server works fine, so the authentication methods configured are correct i'd say..
the same tests using the ex2007CAS server as RPC proxy all succeed!:
MS RCA is all green
https://texfr11.domain.test/rpc/rpcproxy.dll?texmb11:6004
--> 503
https://texfr11.domain.test/rpc/rpcproxy.dll?tdc01421:6004
--> 503
rpcping -t ncacn_http -s texmb11 -o RpcProxy=texfr11.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success
rpcping -t ncacn_http -s tdc01421 -o RpcProxy=texfr11.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success!!
Logs
all tries against the 2013 CAS server generate '404' log entries in several logs int the Logging directory, the most explicit being the one in Program Files\Microsoft\Exchange Server\V15\Logging\HttpProxy\RpcHttp : HttpProxy_xxxxxx.LOG
2015-04-30T19:58:00.153Z,895cdf07-f2eb-4beb-b787-da02ba11b0c2,15,0,1076,0,,RpcHttp,webmail.domain.test,/rpc/rpcproxy.dll,,Basic,true,DOM\user,,,MSRPC,10.10.142.132,TEXCH31,404,,MailboxGuidWithDomainNotFound,RPC_IN_DATA,,,,,,,,,4,,,,1,,,0,,0,,0,0,,0,2,0,,,,,,,,,1,1,0,,1,,2,2,,?TDC01422.domain.test:6004,,BeginRequest=2015-04-30T19:58:00.153Z;CorrelationID=<empty>;ProxyState-Run=None;ProxyState-Complete=CalculateBackEnd;EndRequest=2015-04-30T19:58:00.153Z;,HttpProxyException=Microsoft.Exchange.HttpProxy.HttpProxyException:
RPC server name passed in by client could not be resolved: TDC01422.domain.test at Microsoft.Exchange.HttpProxy.RpcHttpProxyRequestHandler.ResolveToDefaultAnchorMailbox(String originalRpcServerName String reason) at
Microsoft.Exchange.HttpProxy.RpcHttpProxyRequestHandler.ResolveAnchorMailbox() at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.InternalBeginCalculateTargetBackEnd(AnchorMailbox& anchorMailbox) at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.<BeginCalculateTargetBackEnd>b__3b();
the error suggests the name could not be resolved. but nslookup works fine. i can ping the tdc01421 correctly form texch31, it returns me the ipv4 address. i can telnet to port 6004 from texch31 server to tdc01421 giving me the correct 'ncacn_http' answer..
i look at the 'ValidPorts' and ValidPorts_Autoconfig_Exchange reg keys and filled them with the same i have on the 2007cas servers (all ex servers, all dc/gc's, all of them with netbios & fqdn ports 6001,6002 & 6004..) but also no success.
im out of ideas by now..

Hello togehter,
if anyone is using the Interim Update (Hotfix) "Exchange2013-KB2997209_2997847-x64-en.msp" please be aware of the following bug in this hotfix:
NOTE: Another issue that we have seen only from some E2013 On-Premises customers who installed
fixes for any of the above E2013 CU6 related issues is that “Using OWA, users cannot create new messages or reply to existing messages” – These are mostly installer issues where OWA files are not copying correctly in the new version directory. Ideally the
content of these two folders, i.e. “V15\ClientAccess\Owa\prem\15.0.995.31” and “V15\ClientAccess\Owa\prem\15.0.995.29” should be identical, now if for any reason, they are not then it can break the OWA experience like described above. Take these steps if you
run into related issues:
-Backup the contents of “15.0.995.31” folder to a different folder/directory
-Copy the files and folders from “15.0.995.29” to “15.0.995.31” folder – this should fix the issue …
Best,
Martin

Is it possible to call API over http(not on ssl) from inside a secure page which is on HTTPS

Hi Guys
We are running a httplistner on localhost exposing http based end point. can we call this url from a website which is exposed over https when it opens from the same machine.
Note: the site is being opened in browser is using HTTPS and is on SSL.
if possible can some one please help.
regards
Mukesh V

hjuarez wrote:
Please re-read my first post. I think it is clear.I disagree.
I want to import a dll It is not clear if you are aware that .dll files are a windows thing.
but I have to run the java code on a solaris box
in order to use its methods in java, It is not clear if you are aware using .dll files in a Solaris environment has nothing to do with Java.
My question was if there is a solution -or not- that faces this kind of issues.It is not clear if you are talking about Sun Solaris or x86 Solaris.
I don't know if it makes any difference, but it might.
Maybe your question is: why this guy wants to do something like this?No. I am not concerned with that.
Just trying to help you ask the right questions.
And maybe you will find the answers yourself once you have the right questions.
I'm integrating some biometric solutions on Sun Access Manager. But the biometrics vendor only provides windows ocx's and DLL's. And Access Manager is running in a Solaris box.
I want to know if I can do something by myself or just tell the biometrics vendor that they must provide a Java solution.
I have been trying to find something on the web, but I asked this forum because maybe someone has tried to do something similar.The suggestion by jschell is probably your most promising option.
Integrating the .dll files with Java on a Windows box
and communicating between Access Manager / Java on the Solaris box and your Java code on the Windows box
(possibly using RMI).

[solved] Owncloud over SSL: http works, but over https only apache

Hello,
I try to setup owncloud with SSL.
Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
(I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
How could I make the owncloud site available over https?
relevant files:
owncloud.conf:
<IfModule mod_alias.c>
Alias /owncloud /usr/share/webapps/owncloud/
</IfModule>
<Directory /usr/share/webapps/owncloud/>
Options FollowSymlinks
Require all granted
php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
</Directory>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /usr/share/webapps/owncloud
ServerName http://example.com/owncloud
</VirtualHost>
I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
<IfModule mod_ssl.c>
Listen 443
</IfModule>
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#own additions:
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
Options FollowSymLinks
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Include owncloud
Include /etc/httpd/conf/extra/owncloud.conf
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
thanks!
Last edited by Carl Karl (2014-05-06 07:40:53)

OK, solved.
What I made wrong:
https://localhost leads to the apache page
https://localhost/owncloud leads to the owncloud page.
(Just as an information if there are other apache noobs like me...)

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

Ftp over http authentication

Hi,
we have problem opening FTP sites that require authentication.
When I try to open a ftp site, example ftp://site.com, I get this message in the browser :
Authentication is required by the FTP server ( ftpserver.com ). A valid user ID and password must be entered when prompted.
In some cases, the FTP server may limit the number of anonymous connections. If you usually connect to this server as an anonymous user, please try again later.
But I didn't receive authentication prompt at all
I think we didn't have issues with the previous versions...

Are you using IE by chance? If yes, try accessing the FTP server using a different browser. IE has a known issue that such that it doesn't prompt end users to enter FTP server credentials when the user goes through any proxy (not just the WSA). We just decided to add this to the WSA release notes as a "known issue" with the different workarounds listed. You'll see it in the next version of the 7.5 release notes when that comes out someday. Here's what the bug write-up will say:
Defect ID 5463
Users cannot access FTP servers that require server authentication using FTP over HTTP with Internet Explorer. This is a known issue with Internet Explorer when communicating with web proxies. This is due to Internet Explorer never prompting users to enter the server authentication credentials.
Workaround: To access FTP servers that require server authentication, use one of the following workarounds:
Use a different browser, such as FireFox or Chrome, to access the FTP server.
Use an FTP client that uses native FTP to access the FTP server.
If users must use Internet Explorer, they can prepend the username and password into the URL. For example: ftp://USERNAME:[email protected]@ftp.example.com
54636

ACNS 5.5 / Troubleshooting bad quality VIDEO (MMS-over-http)

Hello community,
For an unexplanable reason I have to deal with an ACNS problem which is not my domain at all ! ACNS 5.5.15 is on a WAE-512-K9 working with CDM.
Please can someone advice me on how to start the basic troubleshooting steps on the following issue :
============================
- Users in Sydney are complaining of bad quality when they watch a video from an Intranet server in Frankfurt.
Video flow has bad quality (buffering ..) and/or stops before the end of the video.
- Users browsers are configured to use the WAE as local proxy on ports 3129 (.pac file). Requested Video on the intranet is in the Windows Media format and flows are MMS-over-http.
- No multicast distribution is used, neither content pre-positioning.
============================
We did a wireshark trace on the user PC watching a video which ends up unexpectidely with error code 500 => We follow the TCP stream, Time/Sequence graph is linear until ACNS sent [PSH,ACK] tcp flags to the user PC. Then PC answers with [FIN, ACK] etc...and the stream ends.
I have checked the show-tech (i have attached some commands from the sh tech) especially TCP statistics but I do not if the values are normal or not.
I am thinkink to open a TAC case but before contacting Cisco I prefer to try some basic tests if they can help.
Any recommendation on how to start a troubleshoot or any advice would be gretly appreciated.
Thanks.
Karim

Hi Defcom,
Thanks for the quick reply. I have tried changing and resetting the bandwidth limits at both ends last week at both ends but no joy!
I am going to try the solution on the Gerry's link above later but have to wait for my brother to be free as he has an airport as well(had a baby yesterday (hence why we are setting this up)).
Dave

InitialContext lookup over HTTP using a full PROVIDER_URL (including path)

Hi,
We have a standalone Java JMS client application that is sending messages to a queue on a WebLogic (WLS 9.2 MP3) server. It uses the WLInitialContextFactory (WebLogic implementation of InitialContextFactory) class to look up the initial context over HTTP when making the connection to send messages to the queue.
This all works fine when the client connects directly to the server - i.e. supplies the address of the server as the PROVIDER_URL. However, in our infrastructure, we cannot connect directly from this client to the server; we need to go via a HTTP proxy.
In a basic configuration HTTP proxy we set the provider URL to be the address of the proxy server, with the proxy is configured to route all requests straight through to the WebLogic server. This configuration also works fine - the JMS client can send messages successfully.
Unfortunately, this basic proxy configuration is still not sufficient for our Production environment. Our production proxy "fronts" multiple servers, each one identified by the first portion of the URL. So, the proxy is be configured such that requests to "http://proxy/server1/test_request" will be routed on to "http://server1/test_request", whereas a request to "http://proxy/server2/test_request" will be routed to "http://server2/test_request". This configuration works fine for basic HTTP requests, to webpages etc.
However, when we try we use this mechanism with our JMS client over HTTP, it is not working. We set the provider URL on the client to "http://proxy/server1" in order to send a message to server1. However, we find that the WLInitialContextFactory class seems to be ignoring the final part of the URL ("server1") and still sending requests directly to the root proxy address of "http://proxy", so it doesn't work.
I appreciate that this can be viewed as a WebLogic specific implementation issue for their WLInitialContextFactory, and I've raised a query with their support people on this. From my own research however, it seems the behaviour of their factory is not different to most other implementations - i.e. the major implementations would all have this issue.
I'm wondering if anyone is aware of any implementations that would handle the situation I've described. If not (or otherwise!) is there something crazy about our approach that noone has catered for it?! It seems a reasonable situation to me, but maybe I'm missing something!
Any comments, advice, etc. would be greatly appreciated, thanks.
Regards,
Adrian
Edited by: AdrianFitz on 08-Apr-2010 12:21

Hi,
Thanks for the quick response. Would you mind providing a bit more detail on your suggestion, as am not 100% sure I understand it fully.
If I see what you are getting at, are you talking about configuring proxy settings on my client side, similar to how I have to configure my internet browser with proxy settings when accessing the internet from within my companys LAN?
If I'm interpreting that right, then I guess my use of the word proxy might be a bit inaccurate or lead to some confusion. What my orginal post described as a proxy should have been more accurately describes as a reverse proxy (acting primarily as a load balancer).
Ideally, other than changing the URL slightly, the client should be 'unaware' that it is going through a proxy at all.
Hope that clarifies somewhat, any further comments would be great! Thanks.
Regards,
Adrian

Flat file over HTTP or SOAP

Hey Guys,
I need to post a Flat file over HTTP (or SOAP), is this possible without developing my own Adapter module?
I just need to get a Flat file from a FTP server and post to another server via HTTP,since there is no message mapping involved, i developed the scenario without any Integration Repository objects, it is just a pass-through scenario.
Now i am stuck on the receiver side since i am unable to post Flat file over HTTP.
Secondly i have Login URL, Logout URL and upload URL from the receiver system, i don't see any place in receiver HTTP adapter to put all these 3 URL's, can i use SOAP adapter to put all these URL anywhere?
Any help would be appreciated.
Thanks
Saif
Edited by: Saif Manzar on Jan 19, 2010 2:51 AM

Hey Guys,
I need to post a Flat file over HTTP (or SOAP), is this possible without developing my own Adapter module?
I just need to get a Flat file from a FTP server and post to another server via HTTP,since there is no message mapping involved, i developed the scenario without any Integration Repository objects, it is just a pass-through scenario.
Now i am stuck on the receiver side since i am unable to post Flat file over HTTP.
Secondly i have Login URL, Logout URL and upload URL from the receiver system, i don't see any place in receiver HTTP adapter to put all these 3 URL's, can i use SOAP adapter to put all these URL anywhere?
Any help would be appreciated.
Thanks
Saif
Edited by: Saif Manzar on Jan 19, 2010 2:51 AM

Mapi over HTTP issue

Similar Messages

Maybe you are looking for