Mapping between ABAP and Java IPC structure
Hi all:
Somebody know how translate the following abap structure to java:
KOMK-KDUMMY = 'X'
KOMP-PSTYV = 'ZTAD'
KOMK-ZZNTGEW
Help me please!!!
David,
Open KOMK in se11 / data type and check the meaning.
Its a header bridge structure between pricing and other application.
You can find meaning of structure attributes there.
Only the names are different but meaning of them remains the same in CRM.
Nikhil Alulkar
Similar Messages
-
Error during VM container communication between ABAP and JAVA
Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul MandaleThanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 04
M sid CUS
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.52.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2. -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles -
Explicity mapping between ActionScript and Java objects for the BlazeDS Messaging Service
The BlazeDS documentation shows how to explicitly map between ActionScript and Java objects. For example, this works fine for RPC services, e.g.
import flash.utils.IExternalizable;
import flash.utils.IDataInput;
import flash.utils.IDataOutput;
[Bindable]
[RemoteClass(alias="javaclass.User")]
public class User implements IExternalizable {
public var id : String;
public var secret : String;
public function User() {
public function readExternal(input : IDataInput) : void {
id = input.readObject() as String;
public function writeExternal(output : IDataOutput) : void {
output.writeObject(id);
and
import java.io.Externalizable;
import java.io.IOException;
import java.io.ObjectInput;
import java.io.ObjectOutput;
import java.util.HashSet;
import java.util.Iterator;
import java.util.Set;
public class User implements Externalizable {
protected String id;
protected String secret;
public String getId() {
return id;
public void setId(String id) {
this.id = id;
public String getSecret() {
return secret;
public void setSecret(String secret) {
this.secret = secret;
public void readExternal(ObjectInput in) throws IOException,
ClassNotFoundException {
id = (String) in.readObject();
public void writeExternal(ObjectOutput out) throws IOException {
out.writeObject(id);
If I called an RPC service that returns a User, the secret is not sent over the wire. Is it also possible to do this for the messaging service? That is, if I create a custom messaging adapter and use the function below, can I also prevent secret from being sent?
MessageBroker messageBroker = MessageBroker.getMessageBroker(null);
AsyncMessage message = new AsyncMessage();
message.setDestination("MyMessagingService");
message.setClientId(UUIDUtils.createUUID());
message.setMessageId(UUIDUtils.createUUID());
User user = new User();
user.setId("id");
user.setSecret("secret");
message.setBody(user);
messageBroker.routeMessageToService(message, null);Hi Martin. The way that AMF serialization/deserialization works for BlazeDS is the same regardless of which service is being used, so yes that code will work for messaging as well. On the server, the serialization/deserialization of messages happens at the endpoint. For an incoming message for example, the endpoint deserializes the message and then hands it off to the MessageBroker which decides which service/destination to deliver the message to.
That was a good question. Thanks for asking it. Lots of people are used to doing custom serialization/deserialization with the RPC services (RemoteObject/RemotingService) but I'm not sure everyone realizes they can do this for messaging as well.
-Alex -
Communication between Abap and Java and Java to Abap
HI,
I have installed BI 7.0 and the user complaints that BEx WEB Application Designer Query results are not showing up in the WEB URL Link.
and the BI user suggests that communication between Abap to java and Java to Abap has to be done?
How to setup ABAP to JAVA and JAVA to ABAP communication?
Regards,
Magham.Hi,
Jco conn from ABAP to Java
=====================
You can use the JCO RFC Provider Service of the Web Application Server for your ABAP to Java calls.
The steps involved in that are
1. Configure destination in SM59 in SAP.
2. Create RFC Destination in Visual Admin.
3. Create a stateless session bean with JNDI name as the name of calling function module in SAP.
4. Add a business method public void processFunction(JCO.Funtion fn) which is called by the JCO RFC Provider Service. The name should be 'processFunction'.
5. Set library references in application-j2ee-engine.xml to type weak for the following
a. com.sap.mw.jco.
b. com.sap.tc.Logging (if you are using the logging api )
Here is the sample code for the EJB biz method
Business Method.
public void processFunction(JCO.Function function) {
try {
// Get the import parameters for the function module
JCO.ParameterList importList = function.getImportParameterList();
logger.infoT("The value sent is" +
(String)importList.getValue("USER_NAME"));
// Set the export parameter value for the function module
JCO.ParameterList export = function.getExportParameterList();
export.setValue("From EJB", "RETURN");
function.setExportParameterList(export);
catch (java.lang.Exception e) {
e.printStackTrace();
Jco conn from Java to others(ex:ABAP)
=====================-==========
Open Visual Admin(C:\usr\sap\SID\JCxx\j2ee\admin\go.bat) and connect to server
Go to Destinations service
Open HTTP Settings Tab
Add/Edit destination SLD_DataSupplier and type following values
URL http://xyz.corp:53000
Authentication - BASIC
User dynproxxx
Password - bp52st000
Press save and test (if you get response code 200 everything is o.k.)
Add/Edit other HTTP Destination named SLD_Client with the same values as SLD_DataSupplier:
URL http://xyz.corp:53000
Authentication - BASIC
User dynproxxx
Password - bp52st000
Press save and test (if you get response code 200 everything is o.k.)
Go to SLD Data Supplier service.
Press the button named: Send the Data to SLD and confirm triggering SLD Data transfer (if you receive successful message everything is o.k.).
===================
following blog might helpfull
=======================
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
for basic infor
==============
http://help.sap.com/saphelp_nw04s/helpdata/en/21/84570b3ae14e77b3047c82218974b9/frameset.htm
Award points if it helps -
Password inconsistencies on PI between ABAP and JAVA
Hi,
I have having a problem with the passwords between the ABAP and Java Stack. I have read SAP Note 999962 and reset the password of service user PILDUSER with Tx SU01 and made sure the user Id is not locked.
I then attempted to call the Exchange Profile with http://<PI Host>:<port>/dir/start/index.jsp but the link returns the error:
Internal Error
Internal error; contact your system administrator
Unable to read configuration data (ExchangeProfile/aii.properties)
SAP have aske me to use this liknk too:
http://<PIhost>:<Port>/webdynpro/dispatcher/sap.com/tcxiexprofui/XIProfileApp
and this returns with a 500 Internal Server Error
RegardsHi ViJaYaNt JhA ,
I did not know about the 8 character limit on the password SAP note 999962 doe not list this.
I can change the password in ABAP to 8 characters, but I am still not able to connect to the Exchange profile to change the password.
http://<PI Host>:<port>/dir/start/index.jsp or
http://<PIhost>:<Port>/webdynpro/dispatcher/sap.com/tcxiexprofui/XIProfileApp
Is there another workaround?
Regards -
Testing SSL Connections, differences between ABAP and JAVA stacks
Hello,
I am trying to test an outbound SSL connection to a partner. I already have multiple outbound connections to many partners, but this new one is causing an issue. Our firewalls between the two sites are opened as required, I verified that I can telnet to the 443 port of their sever. I then attempted to connect to their URL, via a Java SOAP message, and it is rejected. Some kind of error regarding our handshake.
In an attempt to troubleshoot the issue I entered their URL in SM59 as a HTTPS connection, tested it, it worked fine. Which indicates to me that the ABAP side works fine.
I do the same on the Java stack, via the SOA Manager: Destinations, and it fails.
"Error during ping operation: Error while silently connecting org.w3c.www.protocol.http.Http.Eception: Peer sent alert: Alert Fatal: unexpected message"
I was thinking that maybe the remote partner only allows specific types of SSL version connection, and the Java side is too low. i.e. the partner only allows TLS v1, and we are attempting to use SSL v2. Is there a place to set this on the Java side? I know I can set inbound parameters on ICM via SMICM.
Any help or assistance would be most appreciated.
Thanks,
Michael MontoneHi,
I suggest that you verify if you use the same release of the SAP Cryptolib for the ABAP and the Java stack.
This could explain a difference of support for SSL or TLS.
Regards,
Olivier -
Connectivity issue between ABAP and JAVA stack
Hi All
we are facing the following issue while running interface. message got failed while processing Graphical mapping in Java stack. Can any one please help us what could be the issue here? Is there anything we missed from Config / XI development.
This message was failed with not more than 200 MB file.
XIServer
JCO_SYSTEM_FAILURE
connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
"SYSTEM FAILURE" during JCo call. connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
A
Appreciate your quick response.Hi Yadagiri,
Please check the reply from Carlos in the below thread
Re: increasing heapsize of java on WINDOWS 2003
Also check your sm59 RFC destination, i guess there is some problem.
Delete AI_RUNTIME_JCOSERVER(RFC connection between the Java engine and the ABAP engine) and create it again.
Hope tht will resolve ur issue...
Regds,
Pinangshuk. -
Connectivity between ABAP and Java Stacks for BI
Dear all,
our BI developer have to use BW Analyser for showing and changing of BW reports in Java based NetWeaver Portal.
Initially just ABAP stack (SID DCE) was installed. In Februar 2014 I installed also an Java Stack (SID JCE) and got dokumentation for
connection to ABAP Stack from SAP Support, it is attached. Further help from SAP Support is not possible, they mean that this
case belong to consultion issues.
Follow activities were sucessfully done:
1. RFC connection DMSAPERP4DEV_PORTAL_JCE was created in J2EE engine
2. RFC connection DMSAPERP4DEV_PORTAL_JCE was created for Portal
3. Portal Server Settings were maintained for portal
4. Singe Sign-In in BI was maintained
5. BI Certificate was imported from BI
6. Portal Certificae was exported from Portal
7. Portal Certificate was imported into BI.
By processing of attached SAP guide it was a problem at step 7 "Create BI System in the Portal"with the
creatig of BW system name. Under "System Administration -> System Configuration -> System Landscape"
I found no systems which are maintained with the Portal Content Studio. I take a template "SAP_R3_Dedicated"
but can not change the system name to "SAP_BW", it is still "Dedicated Application Server for R/3 System". All other
properties was set fine.
At step 8 of mentioned guide I face the next problem - there is no system names under "SAP Reference System"
under "Administration -> System Configuration -> Configuration for User Management", because the system
name on the step 7 could be not set correct, so I can not choose any.
Please advice how to proceed here.
Thank you and best regards
Stan Oberberger
Technical ConsultantHi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points. -
The connectivity between ABAP and JAVA system is not working properly.
Hi,
I have Installed ECC5.0 ABAP system and Netweaver JAVA system with different SID's in single box. While Installing JAVA systen I have selected UME as ABAP system and Installation was success. Once I restart MMC the JAVA server process thowing an rc -11113.
I have pasted trace file for Server process. Please send me any suggestions ASAP.
[Thr 4500] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4500] JLaunchISetClusterId: set cluster id 31689350
[Thr 4500] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4500] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4180] Thu Apr 19 12:06:29 2007
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
[Thr 4748] Thu Apr 19 12:06:30 2007
[Thr 4748] JLaunchIExitJava: exit hook is called (rc=-11113)
[Thr 4748] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4748] JLaunchCloseProgram: good bye (exitcode=-11113)
Thanks,
SurajHi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points. -
Interesting comparison between ABAP and JAVA stacks
1) what is the equavalent of RZ70 in a JAVA only system?
2) what is the equavalent of $sync in a JAVA only system?
3) what is the equavalent of $tab in a JAVA only system?
Thx.hi Jennifer,
>>>>I know there but do not see how to schedule it periodically.
have a look at
"Send Type
Indicates whether the displayed transfer attempt was a manual attempt (Manual) or an automatic one (Automatic (Time Scheduled)) "
from this page:
http://help.sap.com/saphelp_nw04/helpdata/en/15/b4ba8f207a40ab8d28165cf3b04de4/frameset.htm
and you will know how to schedule it
Regards,
michal -
Hello,
We are having MI 7.0 at SPS15.Am trying to apply add to our system(we created SDA file from NWA as an addon).SDA addon getting deployed but its not getting sync between ABAP and Java stack even if is run reload sever time from NWA->Administrator->Mobile Infrastructure->Mobile Components.I can see add-on when i check from SDM but it cannot see when i search under Mobile component in NWA.Application logs shows below error.
#703543993#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##8e6d577024d511e1a299001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592001800000015000030100004B3E6C1311ED1#1323703575929#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##a19424a024d511e18ede001635730592#SAPEngine_Ap plication_Thread[impl:3]_9##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBea n#Plain####
#1.#001635730592000F00000016000030100004B3E6C662CEBE#1323703663073#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_ADMIN#47##n/a##d588777024d511e1c64a001635730592#SAPEngine_A pplication_Thread[impl:3]_18##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerB ean#Plain####
#1.#001635730592002000000015000030100004B3E6CDC2D7E4#1323703786809#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##1f482a9024d611e18dc1001635730592#SAPEngine_Ap plication_Thread[impl:3]_29##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200260000000C000030100004B3E6D02A2DDA#1323703827137#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##37527e6024d611e1a43c001635730592#SAPEngine_Ap plication_Thread[impl:3]_39##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200350000000B000030100004B3E6D1150767#1323703842528#/Applications #sap.com/tcwddispwda#com.sap.ip.mi.admin.wd.paramset.Details.Method-->wdDoModi fyView()#J2EE_ADMIN#56##uwsvt729.merck.com_VZ1_12609950#J2EE_ADMIN#2e05832024d61 1e1b753001635730592#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap .ip.mi.admin.wd.paramset.Details#Plain###Specify all parameters#
#1.#00163573059200250000007C000030100004B3E6F8460AEE#1323704500063#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##c86ab33024d711e185b5001635730592#SAPEngine_Ap plication_Thread[impl:3]_22##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592002F00000015000030100004B3E728C1AF02#1323705313486#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##ad1da59024d911e1a138001635730592#SAPEngine_Ap plication_Thread[impl:3]_37##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592000F0000000000002A400004B3E754A629F8#1323706045836#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#J2E E_GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[im pl:3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#Plain###CMS o rganizer proxy is waiting for requests#
#1.#001635730592000F0000000100002A400004B3E754A659EE#1323706045848#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#J2EE_ GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl :3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#Plain###CMS manag er proxy is waiting for requests#
#1.#001635730592000F0000000200002A400004B3E754A6715D#1323706045854#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.transport.proxy.CmsLogViewer#J2EE GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngineApplication_Thread[imp l:3]_26##0#0#Info#1#com.sap.cms.pcs.transport.proxy.CmsLogViewer#Plain###CMS Log Viewer is waiting for requests#
#1.#001635730592000F0000000300002A400004B3E754A67B77#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###CMS recovery servlet is wai ting for requests#
#1.#001635730592000F0000000400002A400004B3E754A67CE5#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###start recovery#
#1.#001635730592000F0000000500002A400004B3E754AA7F91#1323706046120#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Import running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000600002A400004B3E754AA8344#1323706046121#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Import running. Checked Items: 0; Recovered Items: 0; Re covery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000700002A400004B3E754AAACBA#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Assembly running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000800002A400004B3E754AAAEE5#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Assembly running. Checked Items: 0; Recovered Items: 0; Recovery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000900002A400004B3E754AAB68F#1323706046134#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###finished recovery#
#1.#00163573059200140000000300002A400004B3E7AA40154F#1323707482010#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##b9c439d024de11e1a4ee001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
ThanksHi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
How to connect separated ABAP and Java stacks ?
Hi,
I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
As per my understanding, only JCO RFC is the mean of communication between ABAP and Java stacks.
But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
J2EE stack's status from smicm (ABAP).
Would you please suggest me, if there is any more configuration to be done on abap or Java stack side.
Thanks,
Cheers !!!
AshishHi Sunny,
JCO RFC is tested and it is working fine. So no issues from JCO RFC side. Hope you would have read carefully.
>
Ashish Mishra wrote:
> But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
> J2EE stack's status from smicm (ABAP).
>
========================================================
Hi Anil ,
Thanks for your reply. but
>
Ashish Mishra wrote:
>
> I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
>
Hope I am able to clear your doubt. Java is completely separated stack and not add-on.
Suggest me how can I proceed further on this connectivity.
=========================================================
Hi Olivier,
I am grateful to you for your reply. I understood your point but now except a successful JCO RFC test,
is there any mean to check and ensure that both the stacks are connected properly and ready to use.
Regards,
Ashish -
Diff in web dynpro abap and Java
Hi Friends,
I am new to web dynpro ABAP and Java.
1) Please give me idea about about these two
2) In which Scenarios these are helpfull
3) From which version onwards these are existing
Thanks for your help.
Thanks,
AshaHi Ravi,
The following are basic differences between ABAP and JAVA WD.
1. ABAP WD can be developed in ABAP Workbench thru transaction SE80 whereas Java WD needs SAP NetWeaver Developer Studio.
2. Since ABAP WD is a part of the ABAP Workbench, it has direct access to ABAP dictionary. Hence access is faster.
3. In order to develop on ABAP WD, you will need basic knowledge of ABAP objects, whereas in Java WD, dev is using Java -
Users mapping between EP and ABAP system
Hello
I'd like to ask for some guidance in my quest
Current situation looks like this:
I've configured UME in AS Java to work with LDAP as read only data source. Then I've configured SPNego to run SSO - It works, users from MS AD can log into portal.
Now I have application in WD which authorizes via EP/AD - works fine.
And next step is users mapping between AD and ABAP backend (serving some BAPI's for WD app)
I've found a bunch of help pages starting from
http://help.sap.com/saphelp_nwce711/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm
But somehow it's quite complicated to achieve this mapping. I've tried to set RFC destinations logon type to user mapping but without succes.
Can anyone point me to some more clear example or give path to configure this scenario? Is there a way of configuring this with NWA or some XML file editing is required?
Any help will be appreciated.
BTW: whole environment is in version 7.11
Best regards
MaciejThere is no equivalent to SPNEGO on the ABAP side.
If your goal is to propagate the user, then possible options are:
-> Wait for SAML 2.0 or invest now in a SAML 1.0 provider.
-> Use the same kerberos ticket for the EP as what your ABAP system will accept: route = SNC and 3rd party libraries.
-> Issue SAP logon tickets for the ABAP system from the EP, and use these in your WDA.
Another option is to expose the service with saved logon data in the ICF. If the service is just a wrapper for the BAPI, then you can also consider using trusted RFC between the service and the backend, but this might not be acceptable for your service.
I have only done experimental stuff with this and some of the above is not released yet. Also consider the consequences, even if it "does work"...
Cheers,
Julius
Maybe you are looking for
-
How do I gift an itunes LIBRARY playlist to someone on itunes STORE?
I have an itunes playlist in my music library on my mac. I want to duplicate the playlist to my itunes store account so i can gift the playlist to another person. how do i do this without a) manually recreating the playlist (it's long) and b) not u
-
Workflow not completed, is this best practice for PR?
Hi SAP Workflow experts, I am new in workflow and now responsible to support existing PR release workflow. The workflow is quite simple and straightforward but the issue here is the workflow seems like will never be completed. If the user released th
-
Keyboard malfunction and shorted USB port
Hey all, I've got a question regarding my Apple USB keyboard. Just last night, I spilled a few drops of coffee onto my keyboard. Honestly, it was just a few drops...most spilled onto the desk itself. Now, the three top row of keys on the numeric keyp
-
IPhoto 11 pictures won't open in Photoshop Elements 10
In previous versions of Photoshop Elements a picture in iPhoto would open automatically when edit was selected. This doesn't happen in Photoshop Elements 10. The only solution offered by Photoshop Elements is to use the Organizer to "get photos from
-
I'M TRYING TO REALIZE A DOM PARSER WITH "XERCES V 2.8.1"(I HAVE UNZIPPED THE FOLDER "ORG" OF THE XERCES IN THE SAME DIR OF THE PROGRAM) BUT WHEN I RUN THE PROGRAM I HAVE MANY ERRORS..WHY?THANKS Exception in thread "main" org.apache.xerces.parsers.Obj