Mapping between Sync sender and Async Receiver

Hi Experts,
How to do mapping between Sync sender and Async Receiver?
Flow: Sync SOAP Sender Client -> First Async webservice call -> Second Sync webservice call
1. I have to send some input/request details to first webservice call. It will just update the database.If I do mapping with SOAP Sender client and first Async webservice.. I am getting timeout, because it expects response mapping too.
2. Only Second webservice call return the response back to SOAP Sender client.Here mapping between SOAP Sender client and Second Sync webservice call. I don't have any problem here.
I have to pass the same request info to both webservice calls, Please tell me how to do the async mapping in BPM?

Hello Sara,
Hope these blogs are useful to you..
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in
ccBPM [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in
Satya Kumar

Similar Messages

  • Problem between SOAP Sender and JDBC Receiver

    I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
    The idea is sending an ID for updating one register.
    Table structure is:
        (P_RUT                         VARCHAR2(10) NOT NULL,
        P_NOMBRE                       VARCHAR2(50),
        P_APELLIDO                     VARCHAR2(50))
    The ID is the P_RUT field.
    The structure of message that I send by SOAP, is the following:
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="" xmlns:SOAP-ENC="" xmlns:xsi="" xmlns:xsd="">
              <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
    The JDBC receiver structure is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
              <AS_PERSONA action="UPDATE">
    When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
    I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
    This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
    I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
    Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?

    Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..

  • RFC Sender and RFC Receiver Sync Scenario . Help required.

    I need to make RFC Sender and RFC Receiver Sync Scenario.
    Any docs/links for it.

    I have CRM (r/3) and DM (r/3)system.
    Data from differnent tables of CRM system needs to go to
    DM system different tables , data will be saved there and then return response back to CRM system.
    For this I have given one RFC for CRM system
    For this I have given one RFC for DM system
    So I have to make Sync Outbound Interface
    and Sync Inbound Interface.
    So I think so no BPM is required.I am correct?
    Adapter -- RFC Sender and RFC Receiver Adapter.
    Edited by: Henry H on Jan 29, 2008 11:20 AM

  • Integrtion Scenario using BPM with two sender and multiple receiver

    integrtion Scenario using BPM with two sender and multiple receiver
    How many Application Components are required?

    Hi Vinod,
    1) In integration repository you can have one or many software components it depends on your landscape orchestration
    2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
    also each connection between systems and bpm must have receiver determination and so on.
    Advice: Please treat BPM as a separate system.

  • My sender and the receiver message types structures are I need to m

    Hi all,
    My sender and the receiver message types structures are I need to mapping in this case.
    If it is not required .Let me know in detail,How to proceed.

    If is just to pass the message (as the sender source is the same as the receiver source),
    first you should have the Message Interface of you message
    then you should configure the Receiver determination, as the sender interface use your message interface and in the interface determination you can use the same message interface (same name). You dont have to add any mapping, just let empty and save. Just use one message interface for sender a receive.
    Any questins let me know.

  • One sender and two receiver

    Hi All,
    I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.

    Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:

  • Group Policy won't apply, No mapping between account names and security IDs was done.

    I am using Group Policy Preferences to remove users from the local admin group and add a local admin account.  This GPO is working on 90% of the Win7 machines on the network, but three laptops are not accepting the GPO.  I get the following error:
    Log Name:      Application
    Source:        Group Policy Local Users and Groups
    Date:          6/24/2014 8:49:28 AM
    Event ID:      4098
    Task Category: (2)
    Level:         Warning
    Keywords:      Classic
    User:          SYSTEM
    The user 'Administrators' preference item in the 'Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}' Group Policy object did not apply because it failed with error code '0x80070534 No mapping between account names and security
    IDs was done.' This error was suppressed.
    Event Xml:
    <Event xmlns="">
        <Provider Name="Group Policy Local Users and Groups" />
        <EventID Qualifiers="34305">4098</EventID>
        <TimeCreated SystemTime="2014-06-24T13:49:28.000000000Z" />
        <Security UserID="S-1-5-18" />
        <Data>Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}</Data>
        <Data>0x80070534 No mapping between account names and security IDs was done.</Data>
    I've searched high and low for an answer and nothing I find on-line seems to apply.  I also notice that the option to 'Run as Administrator' does not work.  If I right-click on cmd.exe and select 'run as administrator', the command box opens but
    I am not prompted for credentials and the command box does not have admin rights.  Not sure if this is related or not.
    Any help on this would be greatly appreciated.

    Delete your  remove action from the GPP and push it again, does this issue still occur?
    If it still exists, let’s collect the GPP log for analysis:
    Group policy Preference debug logging policy settings are located under:
    Computer Configuration\Administrative Templates\System\Group Policy
    Click Logging and tracing, select local users and group preference logging and trace.
    Meanwhile, just a similar issue, but it is worth trying:
    A user is added to the wrong group on a client computer that is running Windows 7 or Windows Server 2008 R2
    If you have any feedback on our support, please click
    Alex Zhao
    TechNet Community Support

  • A table mapping between country code and currency code

    Hi experts,
    I want to know whether there is a table mapping between country code and currency code.I have found the table T005(Countries).But I don't why the filed of WAERS(Country currency) hasn't maintained in talbe T005?Whether country code and currency code hasn't direct relation?

    Dear Kelvin
    The said field (WAERS) can be fetched from many tables.  To name a few, below are some of the tables in which, you can see the field for currency.
    1)  BKKI4
    2)  BKKI5
    3)  BWPOS
    4)  KNKA
    5)  KNVV
    6)  MSEG
    G. Lakshmipathi

  • No mapping between account IDs and security was done

    I upgraded to Windows 8.1, it blew up my SQL Server Developer installation. So I traveled 400 miles to get my DVD and reinstall SQl Server. I saw on th eforum that several people had similar problems and they said selecting the repair option of the installation
    would fix it. So I tried but I can't get past the "No mapping between account names and security IDs was done" error.
    I suspected the login to be the issue from the beginning because the *&$%^$ Windows 8.1 update forced me to enter a new password as it didn't find my old one acceptable. Problem is, it didn't update it everywhere and I can't find where to change it for
    SQL Server in this worthless version of an operating system.
    I can't find the login for SQL Server in the the computer services anymore, it's gone from there. I used to be able to go in and manually start the service and change the password. But that great 8.1 update wiped all of that out and left me sitting high
    and dry.
    Does anyone know of a solution? I need to finish this project and my hands are tied at this point.

    Unless you used your own Windows user as the service account for SQL Server, the password change should not matter.
    You talk about "Computer services". The place where to make changes to the SQL Server services is the SQL Server Configuration Manager.
    You say that the SQL Server installation blew up. Is SQL Server not running (you can check this in the Configuration Manager) at all, or is the problem that you cannot log in?
    I was considering to update a small netbook that has Windows 8 to 8.1 the other day, but to get the "free" update, I was told to go the Microsoft Store. I did that the other day from my Surface RT and that was highly unpleasant as it hi-jacked
    by user id and replaced with a Microsoft account. So I am not making that mistake again. I looked at getting Windows 8.1 from MSDN, but then decided it's not worth it for a machine I only use for vacation trips. (All machines that I use for serious work
    do of course run Windows 7.)
    Erland Sommarskog, SQL Server MVP, [email protected]

  • No mapping  between account names and security IDs was done

    I've to give access rights to some folders of server from client machine.
    But using prompt
    ECHO Y|CACLS S:\END /E /P 15dsd1s.DBSERVER\Administrator:F
    its showing me the error
    "No mapping between account names and security IDs was done."
    Kindly suggest some solution.

    I suggest that you post this question in a forum relevant to your operating system rather than a forum for Oracle Database management and usage questions.

  • No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)

    We are getting below error message in MOSS 2007 server, every few minutes.
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (9daf0827-7c85-41c7-82c5-89f93ecd652a).
    Reason: No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)
    Techinal Support Details:
    System.Runtime.InteropServices.COMException (0x80070534): No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)
    at Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherApplication2.SetUsersPermittedToQuery(String[] psaAccountNames, Int32 fForce)
    at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
    at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    For more information, see Help and Support Center at

    Hi Baskaran,
    For this issue, I think the main reason may be the original account is removed or changed from AD.
    In the following there is an article about this to reset the service account, you can refer to it for more information:
    Additionally, as you already tried to reset the service accounts, you could try to clear SharePoint configuration caches in case the caches were not updated, to clear SharePoint configuration caches, you can see the below article:
    More information:
    Qiao Wei
    TechNet Community Support

  • Mapping between Business Partner and BDoc type BUPA_MAIN

    Hi Experts,
    When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
    Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
    I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
    Maximum points will be rewarded.
    Thanks in advance

    Hi Nadh,
    This is done in SMOEAC transaction where you assign the subscription and replication objects.
    You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
    Hope this helps and if so please reward points.

  • Windows 8.1 "No mapping between account names and security IDs was done"

    A week ago, I had a problem with my laptop in which the explorer.exe was restarting itself, when I was trying to fix it, I ran the Sfc/scannow, and it turns out, there were some files broken, then, following the instructions here of how to replace the files
    manually, I get to the Command prompt, and used the command "takeown", but when continued to the "icacls" command, it shows the message:
    "No mapping between account names and security IDs was done. Successfully processed 0 files; Failed processing 1 files."
    I didn't understand what was that, and in the page didn't said anything about that message, I thought that the explorer.exe problem also corrupted this solution, in the end, turns out, it was a third party program which was incorrectly un-installed, I fixed
    and forget about the other problem, until today when I was trying to open Word, when it turns out, that Office was "installing", something that doesn't make sense as I already had it installed and worked on it in the past. But when it's close to
    the finish, it shows, Error 1920, and that I don't have the requeriment grants, later looking on the internet, there was this "solution" (since I couldn't test it, I don't know if it works) saying that I have to user the command "icacls",
    but any time that I try, it says "No mapping between accounts..." therefore, I couldn't solve it that way.
    I don't know what exactly to do, since I don't understand exactly what I broke, hope you can help me, and thanks in advance.

    According to your description, the current problem is your Office program.
    If I am right, there is no any other problem on your system. It narrows down to the Microsoft Office program issue.
    Please run with safe mode to troubleshoot:
    1.Click WIN+R;
    2.Type Winword.exe /safe;
    3.Press Enter.
    If the issue would be gone in safe mode, it indicates the issue is caused by add-ons, please disable the add-ons one by one to clarify which one is culprit.
    If the issue still persists, go Office forum for further help:
    Meanwhile, I would like to suggest you use System Restore to roll back to a previous time when everything worked fine.
    How to  refresh, reset, or restore your PC
    If I misunderstanding, please correct me.
    Karen Hu
    TechNet Community Support

  • Since OS 6 upgrade unable to sync contacts and calendar, receive the following error message: Help Apple improve its products by sending us diagnostic and usage information about iCloud.  By sending this message, you agree that Apple will collect and use

    Unable to sync contacts and calendar with HP Laptop using MS Outlook 2010 and I-phone 4gs since OS 6 upgrade

    The activation server is gone for AA7, but not AA8 as understand it. You will need to do the updates for AA8 to be effective on Win7. It is questionable that it will run on WIn8 (I have no clue for a MAC).
    Your conversation is an example of how many of us got here in the first place. It is fantastic that you were able to hold on and get the problem resolved. Not exactly sure of the solution, but there does seem to be light at the end of the tunnel for folks. Normally, with activation problems like yours, we recommend calling Adobe Support for them to reset the activations. I was just wanting to get a heads up about AA8 on the newer systems. Folks have been successrul on Win7 with the updates, but the results for Win8 are still not known in general. There have been some suggestions, but nothing more. As long as it works for you that is great. For our info, what OS are you running?

  • How can I view The date, time, sender and/or receiver of a text message online?

    I would like to view the date and time sender and receiver of my text messages I read it can be done. I can't find where. If somone one could point me out in the right direction I would appreciate it. Thanks

    Log into your account and to the right of the phone photo you will see usage details in blue then on the next screen pick the phone on the account you want to see the details for and under that you can click to see eveyrthing in detail.  Mary

Maybe you are looking for

  • Discontinuation data

    Hi, I have one error getting during setting discontinuation indicator and follow-up material in MM. I need to discontinue one material with other material as follow-up material. But when i am putting the other material as follow-up material it is giv

  • Delivery not created in Merchandise distribution - WF30

    Hi Experts, I am came accross an issue wherein delivery not created for merchandise distribution. It is automatically created at the time of goods receipt. We are using flow through process. On same day, three PO created via allocation table. Each PO

  • Dynamic Paypal button for PDF fill-in form

    Hi there, I need help with adding a Paypal button to a PDF fill-in form. The Paypal button should feed through the Invoice Number field (a text field) and the invoice total amount (also a text field) to Paypal and add this to the Paypal cart (not 'bu

  • "Logon Failed" Exception with CR2008 SP1/SP2 on WIN2008 Server

    Hi, we have a problem running our .NET Application on a WIN2008 SP2 server. The code which works fine with all VISTA / WIN-XP / WIN7 or WIN 2003 OS. producese an exception when running on WIN2008: CrystalDecisions.CrystalReports.Engine.LogOnException

  • Runtime exception -message mappin in (sxi_monitor)

    hi i have done a simplw bpm scenario by following walk through bpm i get the error(red flag) in sxi_monitor as runtime exception -message mappin in (sxi_monitor) i checked the syntax of message mapping and also checkd every step of mesage mapping sti