MAPPING ERROR with IDOC

Hi Friends,
       I am working on IDOC to JDBC scenario. Here i am using DEBMAS06 IDOC . when i tried to trigger an IDOC from BD12 T code its triggering an idoc but when i see it in MONI of XI, its giving mapping error. when i test my mapping program its executing successfully. even i tried to execute  with the incoming data in the sxmb_moni, i mean that i filles my mapping test with the same data coming into MONI  by filling all the segments coming into XI its executing successfully in mapping test.
   but  when i tried to trigger an idoc from we19 or from bd54 i am facing this error. can any one please let me know what else i can do for running  this scenario. let me know your comments.
Thanks
Ramana.

Hi friends, I am getting the following error. On the sender side we dont need to take care of the structure because we will be importing the IDOC from the application system directly. on the receiver side i have created the structure for the data base. the mapping is running  fine in my mapping test. still i am not getting what else i need to do. please comment on this.
  <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
  <SAP:P1>com/sap/xi/tf/_MessageMapping_</SAP:P1>
  <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
  <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MessageMapping_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>

Similar Messages

  • Mapping Error with Sender JDBC- Idoc scenario

    Hi Guru's,
    I've got a simple asyncronous sender JDBC to Idoc scenario, and I encounter a strange problem with the mapping.
    When I test the mapping it works fine, but when I run the scenario, only the first element (a constant) of the Idoc gets mapped, and mapping stops with no errors.
    Does someone know where to find the error?
    Thanks,
    Karst

    Hi Karst,
    There might be several reasons that you do not see the IDOC structures are not created/mapped:
    1. Most of the IDOC structures are optional (minOccrs = 0), so you have to make sure the structure itself (not just the fields within that structure) is mapped to something that does exist in the source data.
    2. Make sure your JDBC generated source data does have the right namespace as you used in your mapping. I once had a similar problem, but finally found the source data generated in run time is slightly different from the one used in mapping in terms of namespace.
    3. Test your mapping with the source data generated in runtime (you can copy it from SXMB_MONI). Then you may be able to find the problem.
    Hope this helps.
    Hart

  • Mapping Error- In IDoc to File scenario

    Hi Experts,
    Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
    Mapping is :
    TDLINE -- Exists --- Creatif --- Receiver field(in the file)
    But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
    Regards
    Mahesh

    Hi,
    After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
    With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line.  I have not THE solution, so do your own test.
    If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
    Regards.
    Mickael

  • Mapping Problem with IDOC HRMD_A05

    Hi All,
    When i am mapping source structure with IDOC HRMD_A05 i am getting Mapping not sufficiently defined...
    The idoc is used to change the address of employee(infotype 0006)..
    my source structure is
    EMPADDR_MT
       EmpAddr1
         Trans_INFTY *
        Address1
          AddressType *
          PERNR       *
          EFdate      *
          Addr1       *
          Addr2       *
          ADDR4       *
          City        *
          Country     *
          state       *
          Postalcode  *
    the fields to be mapped
    So can any one help me out what r fields to be maintained for <b>HRMD_A05</b>...
    Regards,
    Sridhar
    Message was edited by: sridhar reddy kondam

    All the required fields & segments(shown red in mapping editor or min occurence:1) of idoc need to be mapped.If any of the fields are not available in your source for mapping..map those fields with empty constants using constant option of the mapping editor.

  • BIC mapping error with Text as trasnfer mode & File type

    Hi guys,
    I am using ftp adapter in my sender channel and also using BIC mapping in the sender side.
    When i specify "Binary" as my transfer mode as well as File type, It is working fine.
    When i specify "Text" as my transfer mode as well as File type, i am getting the below BIC mapping error. According to client requirement i am supposed to use Binary. Can anyone help me on this.
    SEEBURGER BICXIADAPTER --- CONVERSION ERROR ---Error: [Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[12(read Segment : BILLINGHEADER)]: caught ReadingException: only whitespaces as fill characters allowed!, Trace: [com.seeburger.jucon.dochandler.util.WrongFormatException: only whitespaces as fill characters allowed! at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:384) at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:193) at com.seeburger.jucon.dochandler.InhouseDocReader.readNextSegment(InhouseDocReader.java:2399) at com.seeburger.jucon.dochandler.InhouseDocReader.moveNext(InhouseDocReader.java:1818) at com.seeburger.jucon.mapping.E2X_DT_BILLINGDATA_2.main(E2X_DT_BILLINGDATA_2.java:991) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2313) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1636) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2386) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1343) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1167) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:873) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:294) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:363) at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:102) at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292) at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3672) at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java:2408) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:630) at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:513) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) ] DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort

    Hi Pratichi,
    in my point of view having text as the file type,the file will be having characters that are used for Segment separators or Element separators ( like space ) in the standard EDI format message.  Hence it is throwing exception in X2E mapping. It is just my point of view but not sure.
    Thanks,
    Shabbir.

  • Mapping error with ModelNode

    Hi all,
    I have this error when I execute my application:
    com.sap.tc.webdynpro.progmodel.context.ContextException: NodeInfo(GetCostsView): cannot modify Userid because it is mapped and there is no active NodeElement to take the value
    I have a Custom controller with this structure:
    NodeGetCosts(ModelNode)
    -NodeOutput (ModelNode)
    -UserId (ModelAttribute)
    I have mapped it to context of View01:
    -NodeOutput(ModelNode)
    -UserId(ModelAttribute)
    In doInit method of custom controller I usu this code:
    NodeGetCosts input = new NodeGetCosts();
    wdContext.NodeGetCosts().bind(input);
    try {     wdContext.currentNodeGetCosts().modelObject().execute();
    wdContext.nodeOutput().invalidate();
    } catch (WDDynamicRFCExecuteException e) {          
    What can I do?
    Thanks
    Andrea

    Hello Andrea,
    Try to map the whole context structure from the CC to your view.
    I think you missed out mapping of the parent node <b>NodeGetCosts(ModelNode)</b>.
    If the RFC requires some input like <i>UserId</i> specify the value for that attribute as well. Also, try
    to execute the same code from the CC's init.
    This should solve your problem.
    <i>Please reward appropriate points</i>
    Bala

  • Catalog mapping error- with large entries

    Hello,
    When the catalog containing around 4000 items was uploaded, I received the error
    The exception occurred (program: /CCM/CL_MAPPING_MANAGER=======CP, include /CCM/CL_MAPPING_MANAGER=======CM00P, line: 465)
    However when the same catalog is getting uploaded when the catalog was split into two and then uploaded. Also the catalog with this large entries is getting uploaded in test system.
    Can anyone help me figure out the problem for mapping exception, and let me know if something can be done?
    Thanks!
    Swetha

    Hi Swetha,
    In my opinion this may be due to a timeout in mapping process. Which CCM SP level are you running?.
    Have you had a look to the SAP Note 926007?.
    I hope this help.
    Best Regards

  • Image maps error with IE 6

    Hallo!
    I have a problem with Internet Explorer 6 (Windows XP) and only 2 image maps with rollovers on a page with a total of 6 image maps.
    This is the page:
    http://www.eqmultimedia.it/paolobisi/home_2009f.html
    Everything is OK on Mac OS X (Safari and Firefox) and IE 7 on Windows XP and Vista.
    ONLY the 2 image maps named "ART FOR SALE" and "CONTACT" do not work with IE 6.
    This is my workflow:
    - Page design in Photoshop.
    - Slices, image maps, rollovers and remote rollovers with ImageReady
    - Save html page and images folder from ImageReady
    - Import html page and images folder in Golive CS
    - Check and correct ALL the links in the image-map code generated with ImageReady
    - Export site from Golive (with Flatten Script Library) and FTP transfer on Unix server.
    I suspect that the image-map code is not FULLY loaded by IE6 and for this reason only 2 image maps on the page do not works.
    Any suggestion will be very appreciated.
    Thank you and sorry for my English!
    ettore

    Correct link:
    www.eqmultimedia.it/paolobisi/home_2009f.html
    Sorry!
    ettore

  • Mapping error with respect to nodes

    hi,
    We have 5 fields in node1 with occurance(0:10) . If all the 5 fields exists then create the target node.
    We used 5 fields>exists>Createif-->target node
    Now we are facing an issue like. Node1 is repeated thirce on source side. Where in the third segment is not having all 5 required values, But as the same fields exists in above nodes the mapping is returning true and creating the target node.
    We dont want this to happen any solution please.
    TIA

    Prabhas,
    I feel the problem can be solved if the we create some blank value for the fields which does not occur under one occurence of the node. Try doing below and I feel the problem might get resolved.
    Use IF-ELSE function along with the existence of fields to create a NULL value for the occurences in which fields are absent for e.g IF Field1 Exists then pass Field1 ELSE pass constant "NULL" and from the output of this IF-ELSE check if it is NOT EQUALs to NULL and then as Raj suggested apply AND operations to the output of these EQUALS for all fields containing the same logic similar to Field1 and at last use CREATEIF.
    Also, no need to change the context of fields let them be at their original context.
    Hope this would resolve the issue.
    Regards,
    Amit
    Edited by: Amit valecha on Oct 17, 2011 12:10 PM

  • MultiMapping (Mapping Error)

    Hi Guys,
    Scenario : Idoc --> JDBC (Should Insert into two Oracle DBs)
    Used multimapping for this and configured the scenario (Enhanced Interface Determination)
    But i get a mapping error because : IDOC imported donot have the Element "message1"
    which got reflected when i said my Target Interface is Two Messages.
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>
          <ZIDOCPLANORDER>
             <IDOC BEGIN="">
                <EDI_DC40 SEGMENT="">
    Actual Should be
    <?xml version="1.0" encoding="UTF-8"?>
    <ZIDOCPLANORDER>
       <IDOC BEGIN="">
          <EDI_DC40 SEGMENT="">
             <TABNAM/>
             <MANDT/>
             <DOCNUM/>
             <DOCREL/>
    how to Achieve this advice please
    regards
    srinivas

    Hello,
    I'm guessing that you are getting mapping errors when using the test tab. You need to edit your IDOC (in XML form) in order to test it. Use notepad in editing the IDOC, add the following tags:
    1. after <?xml version="1.0" encoding="utf-8"?> add the tag <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"> <ns0:Message1>
    2. scroll down to the end of your message and add this tag: </ns0:Message1></ns0:Messages>
    Save the message as XML.
    This should work when you are testing your messages in Integration Repository only. When the actual scenario is needed (runtime), there is no need to add the tags in your IDOC.
    Hope this helps,
    Regards

  • Mapping ansix12 to idoc orders04

    hi ,
    I have created the data type in the integration repository and i bought the message type for message mapping, but i need to know how to map this with idoc  orders04 and im not sure with the loop concept in XI for mapping. like mapping for more than one line item.
    if any one have any idea idea abt it pls helpme.
    thankx.

    hi ,
    I have to map the ansi x12 file to idoc meta data and for mapping do i need to write a XML schema for the the ansix12 file .. i need help reagrding this .
    thankx .

  • File to IDOC scenario : Error with mapping due to Context handling

    Hi Experts.
    I have a file to IDOC scenario which need your advice.
    Source File structure as follows:
    Control_Header     <1:1>
    Invoice_Header     <1:unbounded)
    Invoice_Line          <1:unbounded)
    Trailer                    <1:1>
    Payload as follows capture from SXMB_MONI
    - <Control_Header>
            <Key>999</Key>
            <TransactionID>RCTV</TransactionID>
      </Control_Header>
    - <Invoice_Header>
        <Key>000</Key>
        <BusinessUnit>HDB05</BusinessUnit>
        <InvoiceNo>64471</InvoiceNo>  
    </Invoice_Header>
    - <Invoice_Line>
          <Key>001</Key>
          <UnitPrice>7.00000</UnitPrice>
          <Quantity>1.0000</Quantity>
          <GSTAmount>0.49</GSTAmount>
          <GSTRate>0.07</GSTRate>
      </Invoice_Line>
    - <Invoice_Line>
          <Key>001</Key>
          <UnitPrice>8.00000</UnitPrice>
          <Quantity>1.0000</Quantity>
          <GSTAmount>0.56</GSTAmount>
          <GSTRate>0.07</GSTRate>  
    </Invoice_Line>
    - <Invoice_Header>
          <Key>000</Key>
         <BusinessUnit>HDB21</BusinessUnit>
         <InvoiceNo>6Y0575</InvoiceNo>
    </Invoice_Header>
    - <Invoice_Line>
        <Key>001</Key>
        <UnitPrice>49.50000</UnitPrice>
        <Quantity>1.0000</Quantity>
        <GSTAmount>3.47</GSTAmount>
        <GSTRate>0.07</GSTRate>
    </Invoice_Line>
    - <Trailer>
         <Key>TRL</Key>
         <TransactionID>RCTV</TransactionID>
         <TotalFeedLine>96</TotalFeedLine>
         <HashTotalValue>212.00</HashTotalValue>
    </Trailer>
      </ns:MT_EINVOICE>
    Mapping as follow:
                                                   IDOC
    <Control_Header>   ->    <Control_Header>
    <Invoice_Header>   -->  <Header_Invoice>
    <Invoice_Line>      --->        removeContext  -->  <Line_Invoice>       this is the child node of <Header_Invoice>
    <Trailer>               -
    >    <Trailer>
    The result of the using the above Payload get the following result which not wht I seek
    <Control_Header>
    <Header_Invoice>
          <Line_Invoice>
          <Line_Invoice>
         <Line_Invoice>   *** This belong to the Invoice_Line of the second <Header_Invoice> at the payload
    <Header_Invoice>
         <Line_Invoice>   *** THis segment is empty
    <Trailer>
    I required the Line_Invoice to belong to the child of the second <Header_Invoice>, I have tried using
    removecontext with splitVaue and collaspeContext but to no avail.
    May I know what is my mistake on the mapping of the Invoice_Line to Line_Invoice>
    Rgds
    FNG

    Hello,
    There should be something that could correlate the Invoice_Header/Key and Invoice_Line/Key. In your example, both are the same for the first and data set. If the sample looks like the one below, it is possible to sort things by correlating the Invoice_Header key and Invoice_Line key
    <Invoice_Header>
      <Key>000<Key>
    </Invoice_Header>
    <Invoice_Line>
      <Key>000<Key>
    </Invoice_Line>
    <Invoice_Line>
      <Key>000<Key>
    </Invoice_Line>
    <Invoice_Header>
      <Key>001<Key>
    </Invoice_Header>
    <Invoice_Line>
      <Key>001<Key>
    </Invoice_Line>
    An example mapping could look like this
    For Header
    Invoice_Header --> Header_Invoice
    For Line
    /InvoiceLine/Key --> removeContext --> splitByValue:valueChanged --> Invoice_Line
    The subfields of the invoice line would also follow a similar logic, you just need to use formatByExample --> splitByValue:eachValue so that the context levels are the same.
    Hope this helps,
    Mark

  • Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi

    Hi,
    I have joined newly to the team.
    When I tried to open one message mapping it throwinf follwing error...
    "Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465..
    Check whether the software component version ID: 44423362454456485465 is in Enterprise Service Repository. Import this version if necessary"
    Is there any impact because of which in the message flow?
    In my case some of the messages are failing with mapping error "runtime exception occured during application mapping com/sap/xi/tf/_SUS2MMOrderResponse_; java.lang.NullPointerException: while trying to invoke the method java.util.Map.get(java.lang.Object) of an object loaded from field com.sap.aii.map`"
    And some of the messages are processed sucessfully and they also using the same mapping program 'SUS2MMOrderResponse'.
    Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
    Regards
    Baskaran K

    Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
    The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
    Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

  • IDOC Serialization(EOIO) using IDOC Adapter throwing Mapping error

    Hello SDN Gurus,
    The scenario I am working on is IDOC(PAYEXT & EUPEXR) --> XI (ABAP Mapping) --> Flat File (IDOC Structure).
    The IDOCS produced in Appl system may be in the following order
    PAYEXT
    PAYEXT
    EUPEXR
    PAYEXT
    PAYEXT
    PAYEXT
    EUPEXR
    I need them to be processed in the same order into flat file.
    The scenario is working good except for the serialization. So I did the following
    Created two entries in IDXQUEUE one for each message type with the same Queue name in XI system.
    Created a new rule for the queue and an associated function module. Used this rule in partner profile for both the message types.  I used the following link to create the above two steps.
    /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    The SAP system in based on WAS 6.4.
    I can see the queue name & EOIO in the inbound message header.
    I am getting a mapping error in ABAP program. If I inactivate the queue(in Appl system SAP ECC), I don't get any error.
    Does anybody had this problem earlier? Please advice.
    Thanks
    Srini Vaidyam

    I found an OSS note to resolve my issue. The note number is 1057573.
    Whenever the queue is activated, the sender system will not send the <TABNAM> field value in EDI_DC40 structure. This note addresses this problem.
    I found out this by comparing the results from SXI_MAPPING_TEST individually for the message that failed after queue is activated and the message that was successful if the queue is inactivated.
    Only thing I noticed now is even if you selected the radio button "Trasfer Immediately" in Partner profile of Appl. system, the messages are not sent. They are getting collected. So we need to manually push them out using WE14.
    This forum Rocks.
    Thanks. 
    Srini Vaidyam

  • Mapping with IDoc problem

    Hi All
    I am having a problem where if I get over about 30 records from my 3rd Party in a file. This data is mapped to the Materials Master IDoc(MATMAS05) and it gets a mapping error when trying to run thru the mapping.
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_MATCAT_MATMAS_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
    If I take this data from the Payload in SXMB_MONI and test in the Graphical Mapping tool in Integration Design it crashes with the above error. If I take this file and break into 2 parts and then send thru the mapping tool both files has no error. Does anyopne have any idea why this error occurs(could this be a memroy error - but for like 30 records) and how I can fix this as we would like to do a mass upload - about 9000 records(materials).
    Your help will be appreciated.
    Thanks
    Clinton

    Hi
    This is such a weird error.
    I have now started taking this file that I receive from the 3rd party with 200 records and tested it with the mapping tool. The results are as follow: From record 1-31 goes successful, 32-147 goes successfully and 148-200 goes successfully. So if I take the file as one file it crash, but if I break the file into the above 3 files it goes thru fine. for the first part it can only take 31 records, the 115, and then the rest. This does not make any sense, can someone please give me some advise.
    Thanks
    Clinton

Maybe you are looking for

  • Scanning into Photoshop CS6

    So I just finally updated my OS and my Photoshop and just encountered something I wasn't expecting.  I have an Epson GT15000 scanner(big one with a feeder) I installed all the drivers and everything and the scanner works fine, but I can't seem to ope

  • Login Page Only One administrators appears

    Hey Guys, Recently purchase a macbook air OS X Yosemite, Processor 1.4 Ghz Intel core i5. Memory 4gb 1600 MHZ DDR3. My girlfriend jumped the gun setting up herself before me as the administrators. So I open up the MB air I login into her Account. I g

  • IMac starts boot then cuts off

    My iMac was working fine.  I got a message that the memory was almost full then it just cut off.  Now when I try to turn it on, it goes to the white screen, The booting bar comes up, but as it starts to boot, everything just cuts off.

  • Wrong information in Spanish website

    I've been noticing errors in the Spanish Apple website for ages now, but this is just too much now. The day of the new MB and MBP laptops I checked to see if the errors in the "Compare specs" were corrected sense they would have to redo some info. Wr

  • I can't open the app store, Maps, or Ibooks.

    The apps when click on them just bounce once and then nothing???? I have repaired the disk and permission and I have also checked all the package contents...PLEASE HELP