Mapping fields for PIM Sync
Hi Everyone,
Does anyone know of a way to define field mappings in PIM Sync for Outlook? This is a tool our organisation would use except for the fact that the field mappings are somewhat useless. Due to the huge risk of importing orphaned records, we are only ever using PIM Sync to export from SoD into Outlook.
Cheers,
Cameron
Thanks Bob. I was pretty sure that was the case, but you never know!
Any idea if the ability to do this is on the horizon as far as PIM Sync is concerned?
Similar Messages
-
Mapping file for Password Sync
The directions are -
Synchronizing Passwords from Oracle Internet Directory to Microsoft Active Directory - Before Active Directory Connector can synchronize passwords in this direction, do the following:
Add a mapping rule that enables password synchronization. For example:
Userpassword: : :inetorgperson:unicodepwd: :user
Req -
Can some one share there mapping file which they would have used for password Sync . you can mail it to me on [email protected]
Regards,
RashidHi,
Below is the mapping I used :
DomainRules
cn=users,dc=test,dc=com:cn=users,dc=coreid,dc=test,dc=com
AttributeRules
# Organizational Unit Mapping
ou: : :organizationalunit:ou: : organizationalunit
# Container mapping
cn: : :orclcontainer: cn: :Container
#Domain cannot be exported
#name: : :domain: dc: :domain
cn:1: :inetorgperson:cn: :User
uid|cn: : :inetorgperson:SAMAccountName: :User
#orclSAMAccountName:1: :inetorgperson:SAMAccountName: :User: truncl(orclSAMAccountName,'$')
#cn:1: :inetortperson:SAMAccountName: :User
# attribute rule for mapping Active Directory LOGIN id
#mail: : :person:sn: :User:
mail: : :person:UserPrincipalName: :User:
# attribute rule for mapping entry and to create orclUserV2
# There should be a mapping rule with orcluserv2 objectclass
# without which the PORTAL may not function properly
sn: : :inetorgperson:sn: :person
givenname: : :inetorgperson:givenname: :person
cn: : :person:displayName: :person
# mail needs to be assigned valid value for default settings ing DAS
mail: : :inetorgperson:mail: :person
userpassword: : :inetorgperson:unicodepwd: :person:
cn: : :person:useraccountcontrol: :person:"512"
mobile: : :inetorgperson:mobile: :organizationalperson:
orclisenabled: : :inetorgperson:obuseraccountcontrol: :oblixOrgPerson:"ACTIVATED"
# GROUP ENTRY MAPPING RULES
cn: : :orclgroup:cn: :group:
# This will work successfully only when cn doesn't have any
# special characters associated with it.
cn: : :orclgroup:SAMAccountName: :group:
uniquemember: : :groupofuniquenames:member: :group: -
Missing multiple fields for contacts, synced to google
The contacts on my ipad3 show some phone numbers only for some of them. I sync with google contacts via my android phone. I can not add additional fields for some contacts and unable to customize the fields either.
Step 1.) Synchronize your Gmail contacts to your Mac by enabling the “Synchronize with Google” option within your Mac Address Book using the ‘On My Mac’ database. This will create a local copy on your Mac of all of your Gmail contacts.
Step 2.) Set up iCloud on your Mac. Synchronizing Contacts should then synchronize your local ‘On My Mac’ database into the iCloud Contacts database.
Step 3.) Set up your Gmail contacts via Exchange on your iPhone. http://www.google.com/support/mobile/bin/answer.py?answer=138740 . This is the only way I know of to actually synchronize your Gmail Contacts to your iPhone directly from Gmail’s servers over the Internet via Push.
Step 4.) Set up iCloud on your iPhone and have it synchronize your contacts as well. -
ELM mapping fields for Person details
Hi all,
I have added the person attributes (Eg. str_suppl2, str_suppl3, bprole, etc) in Person tab in tcode CRMD_MKTLIST_MAP by appending structure to CRMT_MKTLIST_PER_EXT.
Now, in badi CRM_MKTLIST_BADI i have created an implementation. In method CREATE_BUSINESS_PARTNERS i need to write the code to map the additional details. But i dont have nay idea how to do this. Please help. What code should be written there so that i can map the addtional fields for that BP?Hi Rushali,
Please click on the below link to get a detailed understanding of how to write the code for your requirement.
We have implemented the requirement by understanding the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/1c/11b37d0f6c1347b90e00888fb55a20/frameset.htm
For an example on how to append fields to structures and how to create an implementation of the Business Add-In,
see Example: Enhancements for Industry Sector and Industry System , which is displayed as a link at the bottom of the above mentioned linkpage.
Hope it will help you.
Do appreciate helpful answers with your reward points...
Thanks.
Sindhu. -
Mapping fields for REMADV EDI process
Does anybody know the fields we would need to map in our idoc that would allow us to have reference key 1, reference key 2, and the text field populated with data in the payment advice after running our bd87 for our REMADV edi process? Currently we have the other fields necessary filled in to get most data to our payment advice, but our users are asking that these 3 fields are updated as well from our idoc.
Hi Tony,
- The part that is painfully slow is when you need to
map the fields of the aggregated attribute to the DB
fields. It takes 30 seconds to open a drop-down box
for the DB field selection. Sometimes freezes
altogether (or maybe I was not patient enough)This is definitely not good and I haven't seen this problem before. It would be great if we could fix this before the final 10.1.3 release. Could you send me your project at [email protected] ? I shouldn't need the class files, just all of the workbench xml files. You can just send the 9.0.4.5 project if that is easier.
One additional thought. When I was recreating my
project in 9.0.4.5 it complained untill I have
included all of the jar files into my project
classpath. 10.1.3 was less demanding in that respect.
Could it me that those unresolved references were
slowing the mapping?What exactly do you mean by it complaining? Do you mean that it wouldn't let you generate deployment xml? In 10.1.3 there is no longer a requirement to have class files on the classpath when generating deployment xml. You will only need them to import or refresh classes.
Karen Moore -
Idoc Type ORDERS04 Mapping field for VBAK-LANDTX
Hi Experts,
Can anyone guide me how to find an IDOC field in Idoc Type ORDERS04
related to the field VBAK-LANDTX (Country of departure) in Sales order
Header?
Thanks in advance.
ChristinaCrisitna,
Is this for inbound order or outbound order.
I am assuming inbound and in that case, please use ZXVEDU04.
Please reward f answer useful.
Thanks
Ganesh.S -
Hy Guy
In order to do download of pricing from erp to crm i have used the sap note 514952 - Download of customer-specific tables
I have a problem with a field MATKL that in CRM is ZMATKL; when i run the condition objet to update the custom table with this field, I don't have the complete field. In SAP the field is more long (mp00001).
I have other custom fields and I don't have this problem; the others fields are copied correctly.
Please, have you any advice to give me?
thanks in advanceHi Valentina,
Not sure but the step 2 in the note says that the field name entered for remote field should be the field in structure CND_MAPT_ACS_REM , which you have set as MATKL and in structure you added ZMATKL which is wrong. Anyhow I think the field in the structure CND_MAPT_ACS_REM should be named as MATKL( note specifically speaks, the field name be the same as R/3 field name ) because in CRM field catalog you must have already created a new field as ZMATKL which is on CRM side.
component: R/3 field name.
component type : R/3 equivalent data element.
LFld: Field name you entered into field catalogue in step 2 .
FFld: R/3 field name you entered into structure CND_MAPT_ACS_REM_CUST in step 1.
May be this suggestion be helpful to you.
/Hasan -
Reading Micrologix I/O and Mapped Fields
Just beginning to get familiar with Lookout. I am trying to read/write to mapped fields (B and N) in a Micrologix 1500 PLC. What is the syntax for Lookout to read/write to a channel such as B3:1/0? B3:1/0 is a mapped field for I:1.0/0. Any help is appreciated. I have included my fields list for reference. Thanks.
Sudhi
Attachments:
Micrologix1500.xls 53 KBI will hopefully clarify the knowledgebase document.
I'll use your example to try to clarify:
If the AB PLC is I:4/0, and you are trying to read the first bit of the fourth module (assuming the fourth module is the 2nd input module), then the correct Lookout syntax would be: I:1_0 (second input module I:1 and the first bit 0).
Remember begin counting modules with 0 and number them with respect to their type.
With regard to your other examples, I assume these are registers or cards (input or output). Again depending on the type of card and the order in the plc, your examples would be:
B3:0/1 = B3:0_1
C5:0 = C5:0
assuming these last two are registers and not i/o cards. -
BB Desktop Manger v5 with 9500 unable to sync Calendar with categories map fields
BB Desktop Manger v5 with BB Storm 9500
Two laptops one with XP sp3 with office/outlook 2003 and the other vista 64bit with office/outlook 2007
The sync of both the Address book and Tasks are great as I can use the catergories "map field" in both of these options.
The device and the application "outlook 2007/2003" both have the catergories field.
The problem is I am unable to sync The Calendar with categories map fields.
The device side of the map field does'nt have the catergories option but the application side "outlook 2007/2003" does.
From the main menu on the BB Desktop manager / Synchronization / Synchronization tab / Advanced Tab / Calendar / Map Fields Tab
The left side of the screen is the Device listing and the right side is Microsoft outlook.
Is their a way I can add this field to the map fields option for the device?
ThanksHi damlandberg,
Welcome to the BlackBerry Support Community.
This KB article should provide more information on the synchronization error you are receiving as well as a workaround to enable your synchronization. ""The organizer module could not load and will be turned off" when configuring synchronization in BlackBerry Desktop Software 7.1" http://bbry.lv/SdDLCO
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
How to set/get the values thru Wedbynpro coding for User mapping fields
Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha RaniHi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani -
Message Mapping UDF for lookuping of a value inside field's list of values
Hey everyone,
For a FI mapping I'm working on, I was wondering if somebody has some Java UDF which lookups for a value inside the whole list of values which the mapping gathered for a specific field?
Thanks,
Bensource code --
//write your code here
JCO.Repository myRepository;
// Change the logon information to your own system/user
JCO.Client myConnection = JCO.createClient(
// all the client information namely client ,user id pwd etc
myConnection.connect();
// create repository
myRepository = new JCO.Repository( "SAPLookup", myConnection );
// Create function
JCO.Function function = null;
IFunctionTemplate ft = mRepository.getFunctionTemplate("xxxxx"); //Name of RFC
function = ft.getFunction();
// Obtain parameter list for function
JCO.ParameterList input = function.getImportParameterList();
// Pass function parameters
input.setValue( a , "xxxxx" ); //import parameter of RFC, a is input argument.
myConnection.execute( function );
String ret = function.getExportParameterList().getString( "XXXX" ); //export param
myConnection.disconnect();
return ret;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
File Lookup in UDF
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file%2blookup%2bin%2budf
Lookupu2019s in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
SAP XI Lookup API: the Killer
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Webservice Calls From a User Defined Function.
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function -
Mandatory fields for mapping in ORDERS idoc.
Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojibHI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
· MESCOD
· MESCFT
· TEST
· EXPRSS
· STD
· STDVRS
· STDMES
· SNDSAD
· SNDLAD
· RCVSAD
· RCVLAD
· REFINT
· REFGRP
· REFMES
· STATUS
· DIRECT
· OUTMOD
· CREDAT
· CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag -
Sending Request Mapping errors back to a consumer for a sync scenario
Hello Experts,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
I also want to communicated back to the consumer, if there are any connection failures between PI and CRM.
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Your suggestions are highly appreciated.
Warm Regards,
AnshulHello,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
You can use the XI alerting framework for that, here are some references:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
XI: Alerts - Step by step (Step-by-Step blog by Michal)
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Fault Mapping is for application errors only, it will not handle system errors.
Hope this helps,
Mark -
Table name in Oracle for the User Mapping field?
Does anyone know the table name for the user Mapping field in EP6.0?
ThanksHi Alan,
why do you want to access the DB directly?! You can access the information via the Java API, which is in general the most secure way for the DB scheme is always "subject to change without notice"...
Best regards
Detlev -
Mapping the IDOC fields for Inbound PO
Hi,
I am trying to map the fields for PO for IDOC type ORDER05, but unable to do so for the following IDOC fields in segments.
Document Date
Vendor
Account Assignment Category
Delivery Date
Requirement No.
Requisitioner
Purchase Requisition
Preq Item No.
Outline Agreement
Outline Agreement No.
What fields in the IDOC match these in SAP R/3.
Thanks,
Randy.Hi Did you manage to get this IDoc working? I'm having the same problem with the mapping and the documentation is really bad.
Thanks.
Maybe you are looking for
-
How to find change in customer reconciliation account
Hi Experts We have an issue where total customer balance is not tallying with the balance as per Reconciliation account. We feel this could be because reconciliation account of a customer would have been changed. Can you please let me know a) If ther
-
Error while creating manual planned order in apo
Dear expert While I am creating manual planned order i am getting error as message /sapapo/rrp251 Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO But whi
-
If you don't like MISSION CONTROL, here's my FREE fix.
I stumbled on some free software called ISOLATOR. It isolates every open program by itsellf, essentially placing each open app you have alone in a 'space'. It's so simple and elegant it's almost impossible to describe. http://willmore.eu/software/i
-
How to make a button show AND hide a field?
In an interactive form (with Adobe Acrobat X Pro), how can I purpose one button to: 1.) Show a field when clicked the first time 2.) Hide a field when clicked a second time I seem to only be able to make a button do one or the other, but not both wit
-
Unable to Share PDF using the Share Documents feature
Getting a "The selected document could not be retrieved please try uploading the document again" message. Is this a known issue or do we need to look at our SWF configuration?