Mapping not showing up for Oracle Tables

I'm just getting started with OWB after attending a class and am using the textbooks received with the course. I've created a project with modules for different schemas each containing several Oracle tables. I don't get the Mapping for either of these modules nor can I use the configure option to create Mappings. Does anyone know what I can do?

For our OWB projects, we create all modules as target
modules. It is probably a good idea not to use
source modules since OMBPlus does not recognize them.Hi,
I think you may be missing the essential difference between source and warehouse modules. A source module is just that, a place where definitions of he source data is held, which is that data outside the scope of the warehouse project. As such, it makes no sense for OMBplus to reference this information.
As a practical example, it would make absolutely no sense to run OMBplus against your operational OLTP sytem from which you extract your source data.
The value of source modules is that you can reference this 'remote' data as though it is local data, and because you have its metadata, you can manipulate it and map from it as though it is 'yours', even though it isn't. Further, the Import Metadata Wizard can provide details on source system changes, and you can then analyse the impact.
But I'm still puzzled about automatic reconciliation. Please see "Metadata Import and Reconcile" for further details. (52 views and no replies? Surely someone knows how to do this!).
Cheers,
Donna

Similar Messages

Oracle Solaris SPARC(64bit) 12 release is not showing certified for Oracle DB 12c

While installation of 12c Database in Oracle Solaris SPARC(64bit) 12 , getting following error.
INS-13001 Environment does not meet minimum requirements.
Can we install the older version of Solaris SPARC (64bit) 11 ?, or is there any solution for this error, Thanks....

Oracle Solaris 12 doesn't exist outside Oracle.
You should in this case use either Solaris 10 Update 10 or 11, or Solaris 11.0.7.5.0 at least.

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

Ovi Map not showing railway lines on N8 (UK map)

Hi
I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
Thanks.
Regards, Brian.
Solved!
Go to Solution.

What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image. I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5
Attachments:
Scr000087.jpg ‏46 KB

Map not showing

Map not showing standard,hybrid and satellite only only location drop pin is visible

If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
They can both be found from:
http://europe.nokia.com/explore-services/maps/download
with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's

I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download. Who can I contact to find out why?

I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download. I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John. Who can I contact to find out why I'm not getting the rest of season 7 for download?
Thanks,
ChristyQ

Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale. However, Apple states all sales are final.
Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software. They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed. Apple is the cashier. You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin. Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains. Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Do not show dots for 'free' events in the calendar month view

I wish I could.... not show dots for 'free' events in the calendar month view. For an overview of when I have hard-scheduled events in the calendar it's pretty tedious and slow to go day -by day, and other views... Instead the dot in the month view... - why does it show even "free" events? Any ideas, tips?
Thanks!

Unfortunately there is no option to disable the dots.
<Edited by Host>

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

Acrobat XI Pro/Standard doesn't support MS Access 2010: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Third-party version/ Acrobat Version (ship date)
Acrobat 6
(April 2003)
Acrobat 7 (January 2005)
Acrobat 8
(November 2006)
Acrobat 9 (July 2008)
Acrobat X (November 2010)
Acrobat XI (October 2012)
MS Access
Office 97
x
x
x
x
x
x
Office 2000 (Office 9)
N/A
√
√
x
x
x
Office XP (Office 2002/Office 10)
N/A
√
√
√
x
x
Office 2003 (Office 11) (11/17/03)
N/A
√
√
√
√
x
Office 2007 (Office 12) (11/30/06)
N/A
N/A
√ (8.1)
√
√
x
Office 2010 (Office 14) 32 bit
x
x
x
x
√
x
Office 2013 (Office 15) 32 bit
x
x
x
x
x
x

Why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interfering?

why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interfering?@@

If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
Try checking that if you don't.

The DSLR sequence settings are not showing up for me. (I bought CS6)

Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

Did you buy ONLY PPro, or did you buy a suite?
Did you install the program AND the extra content?
Also... More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Newly Created Branches not showing up for Recruiter in the Requisition.

Hi,
We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
Thanks.

Hi,
the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
Kind regards
Roman

Reports 6.0 (not 6i) Intended for Oracle 8.0.3 to 8.0.6?

Was Reports Developer 6.0 (not 6i) released for Oracle 8.0.3 to 8.0.6 (not 8i)?
Thanks

As I remember it was supportet against 8.0.5 and beginning with Patch 7 against 8.0.6, but never against 8.0.4. But this can still be viewed in the certification matrix in metalink.
Regards
Rainer

Mapping not showing up for Oracle Tables

Similar Messages

Maybe you are looking for