Mapping of Scenario in SAP

Hi Masters,
I would like to know how to map the scenario in SAP.
Client is 1000.
There are 3 companies 2000, 3000 and 4000.
Co 2000 is involved only in manufacturing. It receives raw material from Vendors and then manufactures in its own plant 2001.
Co.3000 is involved only in logistics. It takes delivery of the Fgoods from plant 2001. Ownership of the Fgoods transferred from 2000 to 4000. The Fgoods are stored in Warehouse (3001), which is owned by Co.3000.
Co.4000 is involved only in marketing of the Fgoods. It receives Orders from Customers and deliveries are made from Warehouse 3001. Bills are made by Co 4000 and payment collected.
Co.3000 owns Warehouse alone and acts like a C & F agent. Co.3000 gets paid by Co.4000 on the basis of the FGoods value that is stored and taken care.
How to map the scenario in SAP.
Thanks in advance.
Vaidee

Ok,
Then Configure CCode 2000 and make one Plant 2001 and assign it to 2000. Make one sales organization 2001 for this. And also some DC.
Then Configure 3000, and make one Plant ( for storing ) plant and assign warehouse number 3000 to that plant.
Then configure 4000. and make one plant ( for distrbution of goods) , make one sales org 4001, and DCs and divisions.
Now the process :
You wil create inter company STO between 2000 and 4000. And the Warehouse of 3000 ( may be ) assigned to the plant of 4000.
Make Company 3000 as C and F agent and assign as a partner.
Rest all functionality can be done as per standard.
This is my personal view, other experts comments are also welcome.
Thanks,
Raja

Similar Messages

Mapping export scenario in sap

Dear all,
My client is in saudi. They are doing export from their plant(saudi). They are having company's own place in saudi port from which they are exporting goods to all other country such as india, australia, usa.
1. First they need to send the goods from plant location(saudi) to saudi port location. Here they need to pay transport charges to forwarding agent.
2. Second they need to send their goods from saudi port location to all over the country.
3. If they send the goods to india, they are having one place at indian port from there only they will send the goods to all customer in india. same like usa and other country.
Can any one please help me, how to map this process in sap. how can i create that different location (saudi plant location, saudi port location and indian port location) in sap.
Thanks in advance,
Babu

Create Port as one plant and this should be delivering plant. Raise PO on manufacturing plant, so that via MB1B with movement type 351, materials can be stock transferred from manufacturing plant to port.
So the receiving plant (port) will have to do MIGO, PGI and invoice. Now from port plant, create a sale order on export customer, do delivery and billing.
thanks
G. Lakshmipathi

How do we map this scenario in SAP ECC

Hi Gurus,
I need a help from you, to get your perspective on how the below mentioned business scenario can be mapped in SAP ECC.
Scenario: The client is engaged in a business of supplying surgical kits to hospitals. The surgical kit is actually a case with two shelve in it. Tray 1 holds the equipments for surgery and the Tray 2 holds the implants for surgery. There are various different kits depending upon different surgeries. Depending upon the need/demand from the hospital appropriate kit is sent to the sales rep, who then delivers the kit to hospital. Now when the kit is supplied to the hospital, the surgeon uses the equipments from Tray 1 to perform the surgery and consumes some of the implants (as needed) from Tray 2. Once the surgery is done, the equipments are cleaned by the hospital and the kit is sent back to the sales rep.
At this point the sales rep need to raise an invoice to the hospital for the implants that were consumed from the Tray 2 and also need to charge for the service for using the equipments. Both the equipments and implants have serial numbers and each kit has a serial number.
Ask from the business
1.They should be able to track which kits are out in the field and should be able to see the inventory within the kit.
2.Should be able to consume the implants from inventory, which have been consumed during surgery and raise an invoice to the hospital for consumed implants.
3.Business should be able to charge for the equipments used
4.They should be able to track the inventory in the kits
5.They should be able to depreciate the equipments in the kits.

Hi,
You may please check in this forum
Also, please explore whether [IS-Healthcare|http://help.sap.com/content/documentation/industry/docu_is_health.htm] helps you finding a solution.
Regards,
P Gomatheeswaran

Back charges scenario in SAP

Hello friends,
I need help to map below scenario in SAP:
We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process .
Note:
We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
Seeking valuable inputs from experts.
Regards
Ravi

Hi Ravi,
Your scenario is similar to "warranty'.
You should not charge-reduce- V1's bill against V2's bill.Rather it should be against the V1's open item;
try " noted item" for V1's payment against V2's bill.This should solve your problem.
Regards
Ramesh

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

When to use which mapping in Scenario

Hi,
When to use
1. ABAP MAPPING
2. JAVA MAPPING
3. XSLT MAPPING
4. GRAPHICAL MAPPING
When to use these mapping at what type of interfaces we should use them.
Regards,
Nissi

Hi,
Hope the following link gives you an idea of use case of different mapping techniques
[Mapping Technique|http://wiki.sdn.sap.com/wiki/display/XI/Mapping+Techniques]
[ABAP mapping implementation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/a15a5f77-0c01-0010-cfa1-94ca75306537]
[XSLT mapping implementation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/0654b462-0c01-0010-4d9d-d2d5a7fee0d6]
[Java mapping implementation|http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm]
To give an example, Usually file content conversion feature of file communication channel does not support the content conversion of structures with deep hierarchy then in that case we can go for XSLT mapping as with graphical mapping we cannot create text file for structure with deep hierarchy.
You get more understanding on the use case when you develop different scenarios there are too many to list.
Hope this helps !!!
Regards,
Amit

No mapping property with name sap.bc.bmt.wfm.xi.interface.synch

Hi All,
I configured Sync/Async BPM scenario, but message is failing at "Call Adapteru201D while calling BPM.
Below is the PI trace :
<Trace level="1" type="B" name="SA_COMM">
<Trace level="1" type="T">Start Sync/Async Communication</Trace>
<Trace level="1" type="Timestamp">2009-11-10T17:57:36Z CET Starting Processing</Trace>
<Trace level="1" type="T">Pipeline Timeout: 10.11.2009 18:58:37 CET</Trace>
<Trace level="3" type="T">Calling BPE Adapter</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">Processing mode is</Trace>
<Trace level="1" type="T">No mapping property with name sap.bc.bmt.wfm.xi.interface.synch.http://***/OrdereateRequestConfirmation_Out</Trace>
<Trace level="1" type="T">OrdereateRequestConfirmation_Out really used in process?</Trace>
</Trace>
And the error message that I am getting is :
<SAP:AdditionalText />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
BPM start receive step has below properties:
Mode :Sync/async Bridge
Synchronous Interface: Synchronous interface of abstract type.
Message: Asynchronous abstract message, which had the same request message as out bound synchronous interface.
Additionally I checked BPM cache , which is fine with out error.
Please suggest.
Regards,
Venkat Tirumalasetti

Goutam,
MI_RecipeDownload_Abstract is my first recv step in BPM
It is also the recv interface for RFC sneder
>> for rec interface for RFC sender it should be with out abstract. only steps inside BPM must be abstract.
Regards
Sreeram.G.Reddy

Webinar: How to implement secure scenarios with SAP NW PI 7.1

SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, August 18, 2009:
How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
Makoto provides the following abstract:
In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
supported scenarios of secure SAP NetWeaver PI deployments.
SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
(no passcode needed)
Dial in:
For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
Kind regards,
Sarma Sishta
SAP Intelligence Platform & NetWeaver RIG APJ

hi,
I'm making this a sticky thread till August 18 so it will have better visibility
Regards,
Michal Krawczyk

Counting Integration scenario in SAP XI

Hi All,
Is it possible to count all message flow (Sender+receiver combination) available in system. I have one case where i want to find all message flow available in XI (not in SXMB_MONI).
I have following question:
1> Can I use Interface mapping for this purpose? ( but Interface mapping is not mandatory in many cases)
2> Is Receiver determination can be used?
3> Is there any other possible way by which I can identify message flow uniquely in Repository or Directory?
Any help will be appreciated.
Regards,
Gourav

Hi Michal,
Thanks for your prompt reply, but still some questions left un-answered.
3> Is there any other possible way by which I can identify message flow uniquely in Repository or Directory?
Should I use combination of Mapping, Integration scenario, split mapping to identify unique message flow because it is very important for me to identify unique message flow exist in system whether it is executed or not.
thanks again for your reply, ur answere really helpful.

How do we map this scenario

i have a scenario,
A material is booked by the customer, customer pays some down payment and then customer takes finance from bank. bank approves for finance and release letter to us saying they are responsible for the balance amount. on that basis material is released to the customer.
and then once invoice is generated bank pays to the company
how do we map this scenario
thanks

Dear varada rajan
You can map this scenario in easiest way:
1) Create different payment terms as per requirement.
i.e. 25% Advance balance after delivery, 10% Advance balance after invoice. etc.
2) Create Order with required payment terms.
3) Capture advance payment against this order no. in F.28.
4) Create Performa invoice to issue your customer to Banker.(Proof to Banker).
5) Do PGI
6) Create Invoice.
When your posting balance amount in FI it will give warning message that we have received advance of so and so.
I think this is sufficient to map your scenario instead of going for downpayment and all.
Reward if use full.
Regards,
Srikanthraj

How to deal these two scenarios in SAP.

Hi All,
My company is Software company.My company is having many clients.
1)Whenever we require some materials for client project he provides us required materials and our company uses them for job, there is no change in state/value of tool, we send back the tool after usage
2)Our vendor will place the material at our place and we will pay
the rent for every month or quarterly.
how to deal these two scenarios in SAP.
Regards,
Purush.

hi
create new material type for this
>1)Whenever we require some materials for client project he provides us required materials and our >company uses them for job, there is no change in state/value of tool, we send back the tool after usage
u can just tick for quantity update for that material type in OMS2
then u can take it using 501 Q
>2)Our vendor will place the material at our place and we will pay
>the rent for every month or quarterly.
for this u can make quantity update as above and give the rent payment from FI side using FB60
regards
kunal
updating

Plz Give me real time file to file scenarios in sap xi

Hello Experts,
Can any one give me the real time file2file scenarios in sap xi. And differnet file structures
and different 'File Content Conversion' objects. Explain me different approch for file2file with different scenarios.
Thanks in advance.
Arjun.

HI Arjun,
Go throgh the following links for File content conversion in the sender side as well as receiver side
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
NAB the TAB (File Adapter)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
Content Conversion ( The Key Field Problem )
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Regards
Sridhar Goli

To migrate SAP business connector scenario to SAP XI.

Hi,
I want to migrate my IDoc-http sap bc scenario to sap xi.
1:What the basic things do i need ?
2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?

Hi Shewta,
from a BI perspective, please check the HowTo-Papers available in this area.
You find them at:
<a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Map EDI messages to SAP iDocs

Hi all,
Is is possible to map EDI messages to SAP iDocs using Oracle Integration?
Thanks

Yes, OracleAS Integration has several components. One is called Integration B2B, which allow you to send and receive EDI messages. You can then pass this on either using Integration InterConnect or BPEL Process Manager to the SAP adapter which can talk to SAP systems using e.g. iDocs.

Mapping weigh bridge into sap

Hi Friends,
Is this possible to mapping waybridge machine to sap.
If possible plz tell me in datail
Thanks in advance.

yes this is possibble ,we need interface to connect waybridge with SAP

Mapping of Scenario in SAP

Similar Messages

Maybe you are looking for