Mapping Problem for header

Hi experts,
I have one sender message as below :
Header
Idoc 1
idoc 2
idoc 3
receiver message is as below :
idoc
- header
- item
idoc 1 is mapped with idoc of receiver, header is mapped with header of idoc.
For idoc 1 one idoc is generated, for idoc 2 and idoc 3 different idocs are generated.
My query is for header data, it is coming only with idoc 1 when it is mapped with header, it should come with all the idoc data.
Please help,
Regards,
Study SAP

Hi,
Use
You require the function useOneAsMany() if a field that only occurs once needs to be replicated as often as another field occurs in the outbound message so that the fields can be written to the target structure in pairs as a record.
Go through this link...
http://help.sap.com/saphelp_nw04/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm
Thanks,
Satya Kumar

Similar Messages

Output channel mapping problem for surround encoder

vista 64 bit
sound blaster titanium x-fi sound card
logitech 5.1 speaker set up
hello, i am trying to mix a movie i made into 5.1. when i open the surround encoder, go to the audio hardware setup and try to set my output channel mapping i only get two speakers. i have a card that supports 5.1, 5.1 speakers, and get surround sound when i play a DVD. yet audition only recognizes my left and right speaker. any help on how i get my output channel mapping set correctly?
thanks in advance!

Thank you for the info, though I admit I'm still a bit confused.
My card is a creative x-fi extreme gamer. It has 3 line out jacks and one line in jack. T Oh, here it is in the manual...thats just not good enough.
But what is the surround encoder dialog box doing, if not encoding surround mixes? The manual says I can exportsurround sound from a multitrack session.
Date: Mon, 1 Jun 2009 21:58:08 -0600
From: [email protected]
To: [email protected]
Subject: output channel mapping problem for surround encoder

Problem for Header text of Contracts

Hi guys,
a suggest:I have created in customizing a new header text and I want display and manage it on header of contract but when I create the contract see always the standard header texts 'release order text', 'header text','header note' 'pricing type' 'deadlines' but my own header text number 17 there is not.
i have simply entered in customizing Contract>Texts for Contracts>Define Text Types for Header Texts and I have created the text with sequence numeber 17...how can I display it in header of contract?
I have seeked for in this forum but in all messages on text I don't find this problem
Thanks in advance
Bye

Hi,
am adding up...........
Please refer the below link......
http://www.sap-advisor.com/abap-coding/sap-text-administration-and-info-records-for-purchase-orders/
Hope it may help you...
Venkat.

Mapping problem for date field

Hi XI Friends..
In my file to idoc scenario..
i have field date value :2006-10-10T14:10:10
i have convert the above field into two fields idate :20061010
itime:141010
i used substring datetransfer functions..
but in static test of message mapping ..i am getting value for itime as 021010
if we give before 12:00:00 its converting properly..after 12.:00:00 its taking 12hr format only..
please guide me..
regards
ram

Hi Ram,
Is this still a problem?
I think the hint will also work in this case:
sourcefield --> replaceString(sourceField/constant[T]/constant[]) --> TransformDate(yyyy-mm-ddHH:MM:SS --> HH:MM:SS) --> targetFieldTime
sourcefield --> replaceString(sourceField/constant[T]/constant[]) --> TransformDate(yyyy-mm-ddHH:MM:SS --> YYYYMMDD) --> targetFieldDATE
Daniel

Mapping problem for IDOC Type DESADV

Dear all
I need to change Segment E1EDP07 in the message type DESADV.
I should concatenate VBELN and VGPOS into BSTNK.
I tried to do this with BD79 (Rules for Data Converting). This seems not to work as I can get only 1 sender Field.
So I tried to use the userexit EXIT_SAPLBD11_001, but it seems that this is not used. I have set a break-point for debugging and treated the IDOC with RSNAT00 without any stop.
Do you have any ideas how I can do this?
Herbert

>
Herbert Schlup wrote:
> I have 2 entries for my DWSADV01
>
> 1 with FM IDOC_INPUT_DESADV and the other with IDOC_INPUT_DESADV1
With the first one, you cannot do much, as there is no user exit in it. But in the second one, there is a user exit when the idoc data is parsed the exit name is EXIT_SAPLV55K_004 and is called in the subroutine DESADV_IDOC_PARSE in the function.
But please note that the function IDOC_INPUT_DESADV1 is used with process code DELS for message type DESADV and Idoc type DELVRY01 and IDOC_INPUT_DESADV is used with process code DESA and message type DESADV with IDoc type DESADV01. So you might be using IDOC_INPUT_DESADV function and unfortunately there are no user exits to handle your requirement.
My advice would be to check with the source system or the middleware to define the mapping of these fields according to your requirement. But if that is not possible, then you need to first check which message type and IDoc type you are receiving and proceed accordingly
KR,
Advait

Key mapping problem for web forms !!!

Hi all,
I have implemented forms 6 on the web using OAS 4.0.7 on WinNT SP 3 workstation. I have modified FMRWEB.RES file for activating F9 - LOV. We have a customized toolbar for our application. There are also shortcut keys defined for the same. For example, if the user presses ALT+S, then 'Save' button gets pressed. But when i run the form on the web, if the focus is on any list box, and if the user presses 'S', then 'Save' button gets pressed. I figured that if i deactivate 'ALT+S' key on the web, then it will work. How can i make the changes in FMRWEB.RES file ??
Please advise urgently...Thanks
Best Regards,
Saumin
null

Hi Hector,
Please ensure that in your Payment Terms code, no such special character has been used that are reserved by XML.This may cause conflict with the XML format and may lead to this issue.
Moreover, for analysis, you may provide with the list of common Payment Terms across your Intercompany participating companies.
Regards,
Agneesh Jain
SAP Intercompany Team

Server 2008R2 mapping to shared folders fails users of Windows 8.1 but seems OK on Windos 8.0 and no problems for Windows 7

Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justify

Hi，
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support

BIZTALK bts action mapping problem with Message Schemas for the Composite Operation

Hi,
I have a message schema made with the composite operation.
now, I have re-deployed my biztalk project and in the send port for this Oracle composite message the SOAP action header hasn't updated the correct action.
now I tried several verations for this soap action mapping and this is what I got:
><BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >xmlns:xsd="http://www.w3.org/2001/XMLSchema">
> <Operation Name="Select" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> <Operation Name="SQLEXECUTE" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> </BtsActionMapping>
Now as you can see the Composite schema has 2 operations one is from an Oracle VIEW and the second one is an Oracle SQL querry.
please if someone could assist me with this issue?
Message Schemas for the Composite Operation
Message Schemas for the Composite Operation

For Composite Operations you don't use the Action Mapping Xml for both the SQL Server and Oracle bindings.
The Action for Oracle Composite Operations is:
http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation
by itself. No Xml or anything.

Problem Editing HEAD tag for Facebook Open Graph

In order for pages to play nice with some of the new Facebook features they can add meta tag content to identify the page as a specific "object" in the Facebook Graph.
The problem is they ask you to add some namespace information as an attribute in the head tag and when I try to put anything in the actual tag itself I get an error:
Header must contain <head> and </head> tags.
I'm attempting to make the head tag look something like this:
<head prefix="og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# my_fb_app: http://ogp.me/ns/fb/my_fb_app#">
I have an end tag for head, I just thing the validation fails if you put anything in the head tag itself.
Any ideas?
Thanks,
Greg

<tt>prefix</tt> is not an HTML atttribute: it is part of RDF (which I haven't got my head round at all). However I get the same error on apex.oracle.com using
<head class="foo"><tt>class</tt> is one of the HTML global attributes permitted on the <a href="<tt>head</tt> element, so this is definitely a parsing bug in APEX.
Couple of possible workarounds:
<li>In the examples in RDFa spec the <tt>prefix</tt> occurs in the <tt>html</tt> element, which APEX 4.1 will permit.
<li>Add the <tt>prefix</tt> to the <tt>head</tt> element using a Dynamic Action/JavaScript on page load.
You might try these and see whether they are compatible with whatever Facebook is doing.
Please include the following information when posting a question (especially if it might be a bug):
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used

Header text update problem for BAPI_CONTRACT_CREATE

Hi,
We are in the process of converting the BDC for Contract creation ME31 into BAPI.
For the purpose we had identified the BAPI,
BAPI_CONTRACT_CREATE.
The bapi works fine , except it doest not update the Header Text.
The parameters passed for header text are
Text ID : K01.
Text Form : *
Text line : ( Header text content).
We are working on ECC6.0.
Pls advice me how to proceed.
Regards
harish

Hi Harish,
Can you please give me a brief idea on how you are using this BAPI?
1) What would be the format of excel file?
2) Does the BAPI work for both create and update ?
3) Any know limitation ?
4) Any documentation you have or you can point me to on the web regarding this BAPI?
Thanks
AK

Alert for mapping problem

Hi,
I am trying to raise an alert based on a condition in message mapping.
For that I am using FM SALERT_CREATE, But I dont know how to pass alert category name to parameter IP_CAT.
Could you please provide me input to connect to alertcategory throgh RFC lookup.
Regards
Shivanjali

Hi Abhishek,
I read this blog but in this IP_CAT contains the alert category name as import parameter.
I am using RFC lookup,I am confused with Export parameters.
I have passed alert category name to IP_CAT but what should be the export parameter for RFC lookup?
Regards
Shivanjali

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping Problem for header

Similar Messages

Maybe you are looking for