Mass BP creation of category Corp account

Dear Peers,
I have to create mass BP - role "Prospect " from an excel along with the Contact person and the Employee responsible.
Do i need to create mass BP-Prospect first and then create mass BP- role "Contact person"?
1. If it is so how to link the BP-prospect and BP-contact?
2. How to link the employee responsible to the BP-Prsopect? all the employees are available in CRM with id EM001*****.
or Which is the best way to create mass BP's shall I use any BDC / LSMW / BAPI / ELM ?
Thanks in advance,
K
Edited by: kesava9 on Aug 25, 2011 6:39 AM

Hi K,
You can use ELM for the same. In ELM , you can create BPs and link them with the contact person as well.
In ELM , you can create BP in two role general and consumer, but there is also a note availble for Prospect, so u can use that note and create mass BPs in prospect role as well.
In ELM BP creation mapping format , there are two variables present for contact.
Regards
Vishal

Similar Messages

  • Query relating to the creation of Managed Service Accounts

    Hi Folks
    I am studying for my 70-411 exam and have a query relating to the creation of Managed Service Accounts.
    I have successfully created an MSA account named 'MSATest' on a DC  using:
     new-adserviceaccount -name msatest –dnshostname home-dc-01 -passthru
    and
     add-AdcomputerServiceAccount -identity home-ap-01 -serviceaccount msatest -passthru
    However the guide that I am using now says that I now need to run:  Install-ADServiceAccount on the host computer in the domain to install the MSA in order to make available it available for use by services.
    So on my member server (home-ap-01) I have installed the Active Directory Module for powershell and ran:
    PS C:\Users\administrator.PCECORP> Install-ADServiceAccount -Identity msatest
    Install-ADServiceAccount : Cannot install service account. Error Message: 'An
    unspecified error has occurred'.
    At line:1 char:1
    + Install-ADServiceAccount -Identity msatest
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : WriteError: (msatest:String) [Install-ADServiceA
       ccount], ADException
        + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:Install
       ServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.Insta
      llADServiceAccount
    PS C:\Users\administrator.PCECORP>
    However this errors, Have I misunderstood the purpose of the Install-ADServiceAccount ?  or am I doing something wrong?
    Thanks in advance for you help.

    Try using  -RestrictToSingleComputer parameter when creating service account with New-ADServiceAccount.
    Gleb.
    Hi Gleb
    Thank you for your help, it is appreciated.  That did the trick.
    All the best.

  • Mass update of Item category in Sale order

    Hi all,
       Kindly guide me to do the mass updating of item category in a sale order.
       I want to update the item category of all the items in a sale order.
       User will be giving large number of sale orders as an input.
       How to proceed to achieve the same?
    Thanks in Advance,
    Regards,
    shaju

    Hi,
         We can write a function module for this by getting an input it want to change this..For eachinput we can activate this in a loop
        Is they gave a file of inputs means we can go BDC or LSMW..If before transferring we want to make only little changes means we can do this by LSMW  otherwise we can go for BDC...

  • Restrict creation new e-mail accounts on Ipad2 4.3 does not work..

    Hello everybody
    For business use i have to secure the Ipad2. I am using the Iphone configuration utility 3.3 to block some features.
    It´s not possible to block the creation of E-mail accounts with this utility. I found out it is possible to restrict on the Ipad itselve using the restrictions option >General>Restrictions...So i have activated this option.
    However clicking the envelop on the homescreen it´s still possible to bypass and to add an e-mail account for example gmail on the Ipad ?? I was rather suprised this was still working but perhaps i am doing something wrong.
    Do you have any idea what is causing this issue or is it maybe a bug?
    Thanks for your feedback.
    Br. Dirk
    Leiden, The Netherlands

    Hi. Does anyone know the answer to this? I found this out as well, though my hardening requires me to actually seal off email usage.

  • After the iOS 8.0 update, our iPads with profile to restrict the modification of account settings, allows the creation of new email accounts!

    We have hundreds of iPads 4 rollout to external sales forces. We used Apple Configurator to supervised them and on the top we deployed thru a MDM system the restriction profile to Disallow modifying account settings.
    After updating some iPads to iOS 8.0 we found out that the restriction "Disallow/Allow modifying account setting" works different compared to iOS 7. Now in iOS 8 it is posible to create new email accounts.
    Behavior in iOS7 (with supervised mode) :
    - This restrictions profile disabled the possibility to add, modify or delete email accounts from the Setting menu.
    - The EMAIL app is blocked popping up a warning message that a creation of an email account is restricted.
    Behavior in iOS8.0 (with supervised mode) :
    - This restrictions profile disabled the possibility to add, modify or delete email accounts from the Setting menu.
    - Using the EMAIL app shows the standard options to create a email account: iCloud, Exchange, Google, etc. and let the user store the account.
    - In Settings the new Email account ist available, but without the permissions to modify or delete them
    Does somebody experienced the same issue? Did you find a workaround?
    Do anybody knows, if their is a fix on this issue in iOS 8.0.1?

    Today we updated to the device to iOS 8.0.2, but we have see the same behavior: EMAIL app is not protected to create new email accounts.

  • Item category and Account assignment category field grayed out in PR/PO

    Hello all,
    While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
    Is there anyway the fields can be made modifiable in ME22N/ME52N ?
    Please help!
    regards,
    Soumyadeep.

    Hi,
    Well, actually you can control the Field settings in customization of Document Type. Check the following :
    Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
    Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
    Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
    Hope this helps,
    Best regards
    Amit Bakshi

  • Define G/L Account for Product Category and Account Assignment Category

    Hello Experts,
    I got a requirment to make a new entry in below SPRO path.
    Define G/L Account for Product Category and Account Assignment Category
    *Individual entries cannot be put into the change request*
    *Message no. SV141*
    *Diagnosis*
    *For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:*
    *1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.*
    *2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.*
    *all entries whose keys match up to character 26 are copied into the change request, rather than a single entry.*
    *System Response*
    *The selected entry is copied into the change request correctly, but other entries may be copied as well.*
    My question is, If I make one entry and move to Quality and production system will it move only one entry or whole table will move?
    Kindly help me.
    Thanking you
    Regards
    Sharan

    I got the same message trying to make an entry in SPRO:
    Define Backend System for Product Category
    I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
    I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
    Best regards,
    Toni

  • Defining G/L Account for product category and account assignment category

    We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination.  This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we have a problem with this logic in the carry out sourcing transction BBPSOCO01.  Our users are creating describe requirements which are then delivered to BBPSOCO01, however the user is not assigning the correct product category, so the sourcing department updates the cart with the correct product category.  Upon doing so, the G/L account gets changed to whatever the V_BBP_DET_ACCT table determines is correct for that given product category/account assignment combination.  We would like to know if their is a way to not fire the "default G/L account determination" when the shopping cart is changed in transaction BBPSOCO01.  I already know about the BBP_DETERMINE_ACCT BADI but thought there might be a less expensive alternative.  Our business treats the G/L account provided by the configuration as a guideline, therefore when the buyer changes the product category they also want to retain the account assignment information.  Any suggesstions on how this might be accomplished outside of creating my own logic in the BADI?
    Best regards,
    Shawn O'Connor

    I got the same message trying to make an entry in SPRO:
    Define Backend System for Product Category
    I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
    I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
    Best regards,
    Toni

  • Creation part of Customer Account Group

    hi...
    When we have going to create customer account group why we have to start with Y & Z why dont we start with numbers, can any one explain plz...
    Regards.
    Santosh

    Hi
    We use a prefix of Y or Z only when we are defining our own object like sales doc. or item category likewise account group.
    they will not be overwritten while upgrading the system also sap recommends to use Z for modifications done in a standard program. Copying the standard one and naming it with Z.
    regards
    Prashanth

  • Mass users creation in BI

    Dear experts,
    I would like to create users in BI massively.
    Could I do a mass upload from a flat file such as using USERS_GEN in others system? What are the available options?
    In fact, I have all my users created in SRM.
    How can I do to have them created in BI as well? Any synchronization tools?
    Please note that we are not going to use CUA.
    Thanks for your feedback.
    chris b.

    Hi
    See the below link and also the threads
    http://www.*********************/tutorials/scat.htm
    Mass user creation in NW 2004s
    Creation of MASS USERS
    Hope this will help.
    Regards,
    Prema

  • Mass user creation error

    Hi all,
    I want to do mass user creation using ecatt.
    After I run the test script I am getting the following error
    uslogond-ustyp input value is longer than screen field.
    Please provide solution to solve this error.
    Regards,
    R.Suganya.

    Hi
    In your script, you need to edit the part where you select Dialog user type and replace it with User Type = A
    You may need to re-record your script but this is what is causing the problem.  It is expecting the single character, not the word Dialog.  It's just a "feature" of CATTS/eCATTS
    Cheers
    Alex
    p.s. I also found this thread which covers the same:  Dropdown box value in the seCatt script
    Edited by: Alex Ayers on Jul 17, 2008 12:19 PM

  • Mass vendor creation through LSMW

    Hi,
    Could you please let me know the mass vendor creation through LSMW also let me know the text file format?
    Regards
    Nama

    Hi Chandrashekar
    It is very easy to create the LSMW structure for the Vendor load, First thing you have to do is to get all the fields that the business wants to be inputed when you are XK01. Than create a LSMW recording and assign the recording to the structure.
    I can guide you with the creation. I do have a PDF for LSMW which will be very helpful for guidance, But how do i share?

  • IPhone not allowed with Corp accounts...Huh?

    I was on my way to the AT&T store when I noticed this discussion forum mentioning that Apple and AT&T are not supporting iPhones on corporate ATT account...
    http://www.everythingiphone.com/forum/iphone/corp-account-activation-eligibility -2207.html
    I'm very disappointed with this decision. What gives ? Seems like a large market being seeded to Samsung, Nokia, et al.

    Mythbusters isn't always correct. GPS is very easy to overwhelm, for example.
    It is impossible to test every situation. Just because someone doesn't find a problem in their test, doesn't mean it won't exist. The proof of a radiation problem is often empirical (and sometimes catastrophic) in nature.
    If you keep up with the anonymous [NASA ASRS reports volunteered by pilots|http://asrs.arc.nasa.gov> you'll find many cases where airliners have experienced problems with onboard personal devices.
    My favorite submittal is the jumbo jet that several times tried to land on autopilot in near zero-zero conditions. Twice they got near the runway and each time the autopilot suddenly dropped them fifty feet or so and they had to do a go around. Finally they figured out that someone in first class was using her cell phone each time they got close to call her friends to say they were landing. The third attempt succeeded after they took it away from her. There are lots of other examples.
    As for cell / wifi in the sky, they use a thousandth of the normal power and are tested per aircraft.
    But as the OP stated, this is not about whether it's a problem or not. It's known that about 15% of passengers are too stupid or lazy to turn off their phone on each flight. It's about the perception that the airplane mode doesn't work on the iPhone.
    This sounds like something Apple should take up with each major airline. [Read more|http://abcnews.go.com/Business/BusinessTravel/story?id=2073047&page=1&Busi ness=true].

  • Mass roles creation

    Hi all,
    I am supposed to create 2000 roles in our system.
    Is there any way to create roles in mass.
    If there please provide me the details to do the mass roles creation.
    Thanks in advance.
    Regards,
    Suganya

    > I am supposed to create 2000 roles in our system.
    > Is there any way to create roles in mass.
    How do you mean 'in mass'? Do you want 2000 identical copies of one role, are you talking about derived roles or do you need to create 2000 completely different roles?
    Please give us some more information. (And prepare for the fact that some tasks do not have shortcuts...)
    Jurjen

  • Mass Content Creation

    Hi All,
    Can you tell me What is Mass Content Creation ?
    Thanks,
    kiran.

    Where did you see the expression?
    You can create PCD content from XML. Maybe this is what was meant.

Maybe you are looking for

  • IWeb SEO Tool Help

    I have added new title tags, meta tags and image attributes using iWeb SEO Tool, I did the whole process, saved my iWeb site to a folder on my desktop, opened it in SEO Tool, made the changes I wanted to make, and published to MobileMe using SEO Tool

  • Flash paper swf

    I have used Adobe Fash Paper to convert Word and Excel files to sfw files. Next I insert these swf files as animation into Captivate (both versions). Sometimes this works fine and other times i get three or four rapidly flashing green boxes at the to

  • Can scripting elements be intermixed with JSTL?

    For example can you have a statement like <% pageContext.setAttribute("value",row.get(key.toString())); %> within a <c:forEach> loop? One page where I needed it, it worked. On another page, however, I got the error "Scripting elements are disallowed

  • Youtube on MacBook Pro.

    I installed adobe flash player twice, and youtube still says I don't have it, but everything else says I do

  • Icon in web address bar?

    I find those little icons helpful when quickly looking in my bookmarks to click on one. Ever since leopard they are not there (just little blue globes). Sometimes one or two will pop up, then they are gone the next time... How do I make them all show