Mass change for material master data

Dear all,
Previously my company had marked some storage location for MRP indicator to exclude the storage location stock from MRP run.
Now I need to reactive back those storage location, where should I go?
I know a way which can active back material by material (tcode: MM02), but that is too slow for me, because I need to active back around hundrreds of materials.
Anyone know where can I modify the storage location indicator and active back it? I had test MM17, MASS, LSMW.. but it seems like not supported for SAP version 4.0B.
Hope will get reply soon, this issue was quite urgent.
Thanks!
Best Regards,
PC

Dear Peai,
check with this steps SPRO - SAP Reference IMG - Production - Material
Requirement Planning - Planning - Define Storage location MRP per plant - Enter
the plant - Check for which Storage locations has got the indicator 1 - Storage
Location stock excluded from MRP - Now remove that or choose the values.
Check with & revert.
Regards
Mangal

Similar Messages

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Mass Change for Service master

Dear Experts,
I've tried to do Mass change for service master.. in transaction MASS, i couldnot able to find the object for service master there..
Is there any possiblity to do mass change for Service Master
thanks

Hi,
I have tried ur scenario. Mass change for service master was possible using the TCode: MASS. But if u go to the Tcode:MASS, system asks object type. object type for service is not available in the match code/input help(F4).
At any time, if u want to know the object type for any transaction , goto the Tcode: SW02.(path: SAP Easy access: SAP Menu->tools-> ABAP work bench->overview->business object overview( SW02).
click on materials mgmt.-> external services mgmt.-> service master ( in the tree list).
Object type for service master: BUS1005
this business object is useful for list display for service master records(get list), read detail data for a service master record, create& change service, display object, check existance of object.
object type for attributes in service master: IFSAP
reference table: ASMD
goto SW02, to find object type for any transaction.
i think this information is very useful to u.
reward me according to ur uasge of this information.

Problem with mass IDoc for Material Master

Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
Pooja

Hello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.

Mass change of Asset Master data

Hi!
Is there any transaction code for mass change of asset master data. I need to change Depreciaiton start date for all assets?
regs,
Ramesh

Use OA02 - Mass change, create a substitution. Add in all prerequisites and save it.
Go to AR01, execute it for the list of assets to be changed and create a worklist for the same.
Execute the worklist in AR31 and refresh it till all changes are completed.

Mass change of customer master data

Hi,
I would like to do a mass change of customer master data.
I need to remove the international VAT register number for local Polish customers, as we will use the local NIP number for these customers.
Which transaction code do I need to use?
Are there any things I should keep in mind?
Thank you.
Kind regards,
Linda

Hi,
You haev a Transaction called MASS. Please check whether you have the authorization for the same. If you have then it is very much easy for you to maintain the same. If you dont have the MASS authorization then you have to create a LSMW and then make the change.
Steps:
1. Enter MASS
2. Object type - Select KNA1 (avaialble in the drop down) and execute
3. You should have an option "Customer master (VAT registration numbers general section) " with table KNAS. Execute
You will be able to choose those customers whom you want and make the changes.
Hope this should help you.

LSMW for Material master data

Hi,
Anybody can help me, how to make LSMW for Material master data.
Thanks in Advance
Arjun

pls follow the thread:
http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm
regards,
indranil

User Exist for Material master data changes like standard cost, master pric

Hello,
Could anyone please provide the user exit name for the following requirement.
The trigger to transfer data from SAP to Unix directory should be whenever one of the SAP field values change (standard cost, master price, Type Of Sales) or whenever a new item is added to SAP. The data will be interfaced out of SAP NIGHTLY using the certain data format.
thanks
kumar

Hi Lakshminarayanan
thanks for your information.
i have tested by changing the Type of Sales in material master(MM02) but the FM - EXIT_SAPLMGMU_001(MGA00001) did NOT get trigger. i did not write any code in side the INCLUDE program.i just tried wether the User Exit is getting trigger or not while changing the material master.
Please advise me how to test it.
Thanks
Kumar

Mass Change in Material Master

How to do mass Change of material group (say from 1HA TO 1HB) in material master in basic data 1 tab.
Plz explain steps.

Hi Rohit,
Follow the Steps SPRO - SAP Reference IMG - Production - Material
Requirement Planning - Planning - Define Storage location MRP per plant - Enter
the plant - Check for which Storage locations has got the indicator 1 - Storage
Location stock excluded from MRP - Now remove that or choose the values.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

Creating MDM repository for Material Master Data

Hello MDM Gurus,
I am new to SAP MDM. I want to create MDM repository for Material Master. What I unddertand is, I can create repository using Bussiness Content shiped with MDM software. I will copy *.a2a file to archive folder of MDM server and unarchive repository. I have following question for you.
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
4. What is the use of *.xsd files and how can I use them?
Thanks,
Bhupesh

Hi Bhupesh
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
save all the map files on your loacl machine. open import manager and select file-> Import, browse to the .map file and save the map with a meaningful name. now next time connect to the source file you want to import and OPEN the map saved.
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
Businees content contains the standard ECC refernce tables like countries, regions etc which can be refreshed from ECC. for this you have to configure MDMGX, defining all the ports in MDM and in ECC the tables from which data has to be refreshed. refer to below threads for details.
Extract Data usnig MDMGX
How to Export Materials from ERP to MDM 7.1 via MDMGX?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
This helps us in configuring the table extraction from ECC, refer to thread-> Extract Data usnig MDMGX
4. What is the use of *.xsd files and how can I use them?
Schema files are used for syndicating the records from MDM to source system. Say we want to syndicate material master from MDM to ECC and in ECC they will be posted via MATMAS05 IDoc. these schemas are the structure of IDoc which will contain the values which will be syndicated from MDM.
Let me know if you know some more details.
regards
Ravi

Problems with new fields added for tc MASS for material master data.

Hello to all.
We created new fields in MARA table and added to the process of the tc MASS. We made the following steps and it almost works correctly:
1-Add new fields to the object ZBUS1001, copy of bus BUS1001.
2-Add new fields to table T130F
3-Add new field to structure E1MARAM.
4-Add new fields to structure CL_MMH1.
5-Add new fields to structure MARA_TMP.
6-Created a function module to control that the new fields not filled in MASS have a "/" value.
If we run the mass for our objetct ZBUS1001 and put a new value or modify the value of new fields, the tc MASS works correctly.If we want to delete a value leaving the value empty,click to the carry out a mass change button and save the change, the system don´t delete the value and keep the first value.
Do you know what the problem is , and what step we didn´t make it.
Thanks in advance.
Edited by: tonnetti pablo on Feb 6, 2008 7:45 PM

Hi,
Check ZTERMDT is checked under Attribute list as below.
Hope it helps..
regards,
Raju

Mass change of material master

Hi Experts,
I have a query regarding mass change to be done in material master. I need to update one value in the Material group 4 field in sales org view 2 in MM02 transaction for nearly 300000 materials. One option i find is LSMW and the other i saw is transaction MM17. Please let me know how feasible is this MM17 transaction? Is it possible to upload all the 30000 materials through MM17 transaction in one go and update the field? Will there be any performance issue if MM17 transaction is used?
Please give your suggestion.
Thanks
Dinakar

Hi,
Use MM17,
Goto the Transaction code MM17 and in the table check the MVKE- sales org data for material
and select the Fields tab and choose the field MVKE-MVGR4 and execute
Now enter all the materials in the next screen for which you want to change and execute
In the next screen you can maintain the new values for the old
Please check and revert
thanks,
santosh

Best practice UOM changes for one master data

Hello ALL,
What are the best practices must be followed while changing one master data UOM data.
for eg i have two UOMs respectively,
basic UOM = EA another one ia Alternative UOM CAR . 1 car = 10 EA.
now my master data team deleting this CAR via MM02 .
what are the follow up actions we should follow.
(1) for eg i have contract existed for thi smaterial as CAR
(2) I have many POs without doing GR
like wise can you list what are the impacts in the system.
how we can go ahead.
What are the best practices followed while this UOM changes for your customer.
br
muthu

Hi Ravi / tao
Yes . I am deleting alternate UOM CAR in mm02 .
I created a contract for that material in CAR .
my contarct also refered in source list.
share your views.
what happen to my open documents.
What happen to open documents ? .. System may not allow me to do GR right?
br
muthu

Mass maint for material master

Dear All
can any one tell me how can i change profit center of material master without removing existing stock?
as on today i am getting error, that stock exists...
i am tried thru MM17 but unable to do it. plz help my to resolve this issue..
rgds
sumit

Hi dear,
This can be done by yet another method.Following steps to be followed.
1) Issue all stock first to a cost center with 201 movement,
2) Change the profit center, then get the material back with 202 movement.
You need to make MM335 message an error message in OMT4 to allow a change only if there is no stock
If you dont follow this way, then you create inconsistencies in profit center accounting.
Because...you received your stock without profit center (actually it is a certain default profit center), if you then change the PC in your material, then each issue will be posted to the new PC, while it never had a receipt.

Mass change for material master data

Similar Messages

Maybe you are looking for