Mass change in BOM status to inactive
Hi,
I want to change the status of BOM Alternate header to inactive. I want to do the same for some 1000 BOMs in one shot. Is there a way to do the same.
Please suggest
Hi,
You can use CEWB to make it inactive.
or
Create a BDC using CS02.
Regards,
Vishal
Similar Messages
-
Hi
I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
but system is not allowing me to do the same , pl tell me where is GAP.
Rgds
Pankaj Agarwal
Edited by: Csaba Szommer on Dec 28, 2011 10:43 PMHi Mario
For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
how it will be helpfull by the MPN-MRP Set function. i am also searching the same thing into Follow up Material . pl have a look on that.
yours reply will be highly appericiable...
Rgds
Pankaj Agarwal -
dear experts
how to add materials in mass change in BOM with CS20 or LSMW or BDC.
regds
princeHI
Check T code CS20 or thru workbench for CEWB you need to activate working area in OP77 select SAP_item .
check this thread
Mass changes for BOM Base Qty
Regards
Anupam Sharma -
Mass change in BOM - field "Relevant to sales"
Hi All,
How to do Mass change in BOM for the field "Relevant to sales" ?
Thanks.
MariannaHi,
Need to use CS02 recording in such a way that you can change every item in a particular BOM.
e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
Hope it will help.
Regards,
Anup -
Dear Experts....
I want to delets some items from all BOMs.Items are specially tools having a matrial type ERSA. How to delete same items from all BOMs.
RakeshHi,
You can carryout the Mass changes of BOM using the Tcode : MASS.
Where you need to select the object type related to BOM and perform the mass change.
It can be done through CS20 and CEWB also.
Hopwe this will help you.
regards
radhak mk -
Mass Change of Document Status
Hi.
We have hundreds of documents in Sol man under the project document tab with a status which we want to change.
Is there a report or similar that can do a mass change of these statuses?Hello,
there is no standard report for changing document status. We build a new abap for it.
kind regards,
Will -
Mass Change to activities status to complete
Hi All,
We have a requirment to Mass Change to CRM activities status to complete. How can we change status from open to complete?
Thanks in advance.Hi Mark,
In CRM , T code "MASS" is available in CRM GUI for mass changes to any field.
You will have to select the business transaction object.
Check if the status field is availble for changes. You will see two tabs one is Table & other is field.
Select the particular field & execute. Then add the list of transaction. And execute & save.
It will carry out mass change.
Please let me know if you need further details.
Regards,
Rahul -
Mass change of BOM item and BOM item catergory
Hello Everyone,
I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
Does anyone have an idea how to complete this task.
Kind Regards
FrankieHello,
Thankyou very much for your reply.
I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
Thanks again for your reply
Kind Regards
Frankie -
Mass change Tcode for status of multiple projects
Dear All,
Any SAP Standard t code for mass Status change for multiple Projects
(like TECO,AALK).
Thanks.
ArunHi
You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
So use this BAPI to Read the status of Project/WBSE
BAPI_BUS2001_GET_STATUS To get both the active system statuses and the user statuses for a project definition
use this BAPI to Change the status of Project/WBSE
BAPI_BUS2001_SET_STATUS
one system status and one user status can be revoked each time, and one system status and one user status can be set each time for a project definition
For Network order status change
BAPI_BUS2002_SET_STATUS
Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
Thanks
S.Murali
Edited by: S. Murali on Jul 24, 2009 3:43 PM -
Dear experts,
I want to change BOM for lot of material
For that I want some procedure
I tried CS20 but no use.
Plz give me some solution
Regards,
sameerHi,
Using discontinuation indicator also you can achieve this.
Need to define the simple discontinuation or parallel discontinuation. Need to define the follow up material also. By doing this automatically the system will replace the material.
Regards,
V. Suresh -
Material BOM mass change error
Hi gurus,
When doing mass change of BOM via tcode CS20, i'm getting below error result.
The following messages were displayed:
Material BOM 00016478 : Delete Item(s)
19760 STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
0130 L 01/01/2002 12/31/9999 1.00 PC > 1.00 PC
No batch input data for screen SAPLSDDT 0010
Folder created/extended
I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
Hope to hear advise from you all on how to deal with this.
Thanks and regards,
ChadDear,
Error message no is 00344 ?
Please refer the OSS note Note 493096 - CS20: No batch input data for screen SAPLCSDI and Note 180686 - For CS20
Regards,
R.Brahmankar -
Mass change of Production Orders status from TECO to CLSD
Hi All,
I want to do mass change of Production Orders status from TECO to CLSD. could you tell me is there any t-code by which i can mass change Production orders status from TECO to CLSD. I want Production Orders to be closed, so that further confirmation shouldn't be done for these Production Orders. please let me know the solution.
Regards,
RamHi Girish/Dogboy,
I can set the status 'Complete' if Order is fully confirmed/fully delivered. When ever i run COHV for partially confirmed/delivered Orders, i get error log saying 'Balance of ORD................ is not zero'. Actually we have lot of Production Orders, where there may be Production Orders released only, partially confirmed etc. so i want them to be closed once for all.
Regards,
Ram -
BOM Display in CS11/CS12 with BOM status "3"
Hi,
Just wanted to know if it is possible to display BOM using CS11/CS12 with BOM status "3"- Active with history requirement.
Your quick reply is appreciated.
Thanks
Nitin
Edited by: Nitin Pandhare on Jun 16, 2011 10:16 AMNo, it doesn't display the BOM in CS11/CS12 which has BOM status '3' (Active with history requirement). It always give an error message " The BOM is not effective on current date" though the BOM exists in the system and has the history within the validity period. If you try, it also gives the same error message even if the BOM status is Inactive (2'). I guess it works only for the BOM, which has status "1" (Active).
May I request you to try at your end as well and let me know.
Thanks for your help and sharing your views.
Regards,
Nitin -
How can I change the asset status in the Fixed Assets Addon?
Hi All,
I installed SAP Fixed assets addon in our customer, and I have imported the fixed assets.
There are assets which book values are 0, but the asset status is active.
How can I change this assets status to inactive?
I
My SBO version is SBO 2007A SP1 Patch 05.
Thanks: VeronikaDear All,
Thanks for your answers. I have managed to solve this problem.
Now I have another problem, but I will create a new message about it.
Thanks: Vera -
Dear gurus
We have 4 store locations under one plant each stores will prepare 57f4 challan and send the materials for subcontractor for further processing. We found that the status of all pending 57f4c's changed as completed instead of assigned. In se16 table j_1iexchdr table we found one particular user changed 13000 records on a single day. What went wrong? How to resolve this issue?.
Any mass change tcode available (other than j1if13) for changing the 57fc status
thanks & regards
senthilHi,
It is not possible for one user to change 13000 record in a single day.
please check with your SAP ABAP persons to check the program anything went wrong.
You can download the data from the table into excel ,change the status and you can upload the data
It am not quite sure .please check with your SAP ABAP Team
Regards
G.Ganesh Kumar
Maybe you are looking for
-
Unable to open scanned Kaiser Baas jpeg files in Photoshop Elements 6
I have scanned photos and negatives using Kaiser Baas Photo & Negative scanner. I am unable to open the jpeg files produced using Photoshop Elements 6, any advice on how to?
-
Using Oracle Text to search through WORD, EXCEL and PDF documents
Hello again, What I would like to know is if I have a WORD or PDF document stored in a table. Is it possible to use Oracle Text to search through the actual WORD or PDF document? Thanks Doug
-
Full Screen Videos in iTunes Don't Work in Leopard
Hi, I've upgraded my MacBook Pro from Tiger to Leopard and I do have a registered Quicktime Pro 7 license. The QuickTime tab shows me that it's a Pro version. However, if I am trying to play full screen videos in iTunes I just see the mini video in t
-
IORDER01 IDoc is sent without plant code from SAP ECC
Hi MEINT experts, Does anyone experience before on the service order integration between SAP ERP and SAP ME, somehow the IORDER01 IDoc is sent over with empty plant code embedded in the original document? (where we suppose to see <WERKS> data tag is
-
I have a problem in text field
Hi All I have a problem in text field. First time Text field is displaying correctly and looking good. When i will go to otherscreen and coming back to same screen text field is displaying as a normal text field and it is not appling and jquery