Mass change in Vendor & Customer Master
Hi All,
Is there any Mass change available in Vendor & Customer Master?
Thanks
Pankaj Garg
Hi,
Enter t-code MASS.
Enter object as per below mention detail
KNA1: -Customers
LFA1: - Vendors
Then click on execute button, You can see the list of fields for vendor & customer master.
Select field as per your requirement and click on execute button then change data as per your requirement.
Regards,
Mahesh Wagh
Similar Messages
-
Change account groups in vendor/ customer master data
Hi,
Do you think is possible to change account groups in vendor/ customer master data?
ThanksHi,
Good evening and greetings,
Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Dual Control for Vendor/Customer Master Data
We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?
Dear,
No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
I hope this helps.
Mauri -
Reconciliation Account in Vendor/Customer Master
What is the function of reconciliation account in Vendor/Customer Master?
Regards
KailashHi
The reconciliation account in the master record records all postings made to a subsidiary ledger.When you post items to a subsidiary ledger, the SAP system automatically posts the same data to the general ledger at the same time. Each subsidiary ledger has one or more reconciliation accounts in the general ledger. These reconciliation accounts ensure that the balance of G/L accounts is always zero. This means that you can draw up financial statements at any time without having to transfer totals from the subledgers to the general ledger.
You can use the reconciliation accounts to make settings:
You can use the reconciliation account to configure the screens for posting items to customer or vendor accounts. Using the reconciliation account you could, for example, suppress the fields for entering exchange rate hedges if these types of transaction are not made.
You can also use the reconciliation account to specify which currencies you can use when posting to the corresponding customer or vendor accounts.
You usually enter the local currency in the master record. Postings can then be made in all currencies to the customer and vendor accounts that the reconciliation account is assigned to. However, you can also enter a foreign currency key in the master record of the reconciliation account. If you do this, you can only post to the relevant customer and vendor accounts in the foreign currency specified.
Thanks & Regards
Sanil K Bhandari -
Change Logs for customer master data in 3.1 H version
Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K -
Enhancements vendor/customer master data
Hi,
Are enhancements aboutvendor/customer master data there to allow to insert 55 digit into field 'Name' (ADDR1_DATA-NAME1) ?
Now the ADDR1_DATA-NAME1 is 40 char.
Any assistance would be greatly appreciated.
Best Regards.
Helen.Moderator message - Welcome to SCN
This question seems closely related to your other question Enhancements vendor/customer master data. Please expand on that one if you want. This one is locked.
Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob -
CATT - vendor/customer master address field length over
Dear all,
when use CATT to record vendor/customer master,the address some fields length are over recorded field length(ex. ADDR1_DATA-NAME4,ADDR1_DATA-STR_SUPPL3...etc)
is there any config in CATT to solve this kind of problem?When you are doing your LSMW batch input recording, on selection screen (where you specify the sales org, distribution channel, division, account group, etc) please put a flag on "Use central address management" checkbox (SAPMF02D 0100 > USE_ZAV).
In this case you should be able to see and fill the desired fields. -
Mass Change Of Vendor Code in Purchasing Info Records
Hi All,
I have one query and I already search a lot for it but didn't find any specific solutions.
I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
Is there any other way to mass change of Vendor in Purchasing Info Records.
Why vendor field is showing me as a grey Field?
Thanks In advance
With Regards,
Patanjali BhagatHi Govardhan,
Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
Still i think that we can not change the vendor id's once it is created for Info record...
Pl correct me if am wrong.
Uts -
Mass change to vendor master records
Hello,
We have implemented classic extended scenario with SRM5 and will be outputting our Purchase Orders, i.e. email,fax,print from SRM as this is out leading PO.
How do we mass change vendor master (BP) records in SRM as we have not set the output medium in the Business Partner (BP) records and would like to do so with a transaction simalar to the R/3 XK99 Vendor Mass Maintanance transaction. Is their an equivalent one avaiable for BP records?
Thanks. Steve.Hi Steve,
The send Medium is stored in table "BBPM_BUT_FRG0061" in SRM.
You may try to add the send_medium to the vendor mass maintenance tcode. But, I am not sure whether this is a good practice. Pls try this first in a sandbox...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Execute transaction "MASSOBJ", select BussObj BUS1006 & double click Application tables. Add the table "BBPM_BUT_FRG0061" for BUS1006.
Then double click the field list for this table & add the SEND_MEDIUM & any other key field over which you would want to maintain this field.
Then execute tcode "MASS" for BUS1006 to mass change the send_medium field.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I would always prefer the LSMW mode rather. Let me know how it goes.
Cheers,
Akash -
Mass change of vendor master data
I need to change the "payment term" for over 1500 vendors of a particular account grp and company code.
How do i do it??hit execute button and it will take you to the selection screen here
you can enter all your vendor which needs to be change and than execute
here you will see all the vendor payment term will show
enter your new payment term at the tope filed and hit carry mass change button and once it's done than save
First try with few vendors -
Validation not working during Mass Change of Vendor Line Items
Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeepHello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi. -
Mass change to vendor bank details
Hi,
I configured the system for payment through their new House Bank JP Morgan. I also created a test ACH file which the bank approved.
The old bank(National City) used CTX(reference details) format for their ACH payments. This CTX entry is made in bank details of vendors. The new Bank wants CCD(reference details field in payment transaction section Vendor general master data) instead of CTX. I made these changes to 3 vendors and ran the Autopay program. It worked. Now I need to update the whole vendor master for the CCD transaction for new bank and also retain the old CTX for old bank. How do I do this. Should use the T-code MASS for this ?. after I need to create an LSMW script to update the vendors in PROD with all necessary testing.
Please give me some suggestions how to approach to this problem.
Thanks!How do you do mass changes with LSMW..
I just want to change bank data details in all the vendor records...
I think the vendors in the production dont even have the any entries in theor bank details section
so for the vendors I have enter the same bank details and change transport them to production
How do I do it with LSMW
thank you -
Vendor/customer Master data
Dear Experts
If existing vendor inform as with the letter, company name is change form July 2009 ,what are the steps to be followed in sap
If i change the Vendor Master from FK02 Transaction code, vendor master data will be changed. If i see the vendor master data /balance for DEC 2008 the vendor master data name is what i changed as of july 2009
Is their any way to enter the period in master data as we change the cost center ( example:we define period in cost center)
Does SAP has this Feature, if not any alternate solutions
Your Responce will be appreciated
Regards
ShamulheqHi,
Vendor Name is stored centrally in the Vendor Master Data only and all the SAP Reports/Transaction would refer to this central information only, and hence if you would change the Name then the new name would only be visible everywhere......but yes the change history would always be available in the Vendor Master data.
Your required logic can be implemented in a custom developed report by a ABAP programmer but in Standard it is not possible.
Refer:
Vendor name Changes -
Mass Change for Vendor CIN (excise) Details.
Dear Masters,
I have an issue to Mass change the Excise data in Vendors master (CIN) details.
The concerned table is (J_1IMOVEND) and the fields are 1) J_1IEXCD 2) J_1IEXRN 3) J_1IEXRG 4) J_1IEXDI
Kindly let me know how can this issue be resolved.
Thankx in Advance.
MANOJHi,
if mentioned tables are not included in MASS for B.Object LFA1, alternatively you can use SAP LSMW functionality for this. The simplest way is to make recording of the simple transaction for changing VENDOR CIN Details.
Hope it helps.
regards,
w. -
Maintain Change Pointer for Customer Master?(change in Master data)
Hello everyone,
i want to capture change in master data .whenever a change happen to required field in customer master an idoc should be create for that and the entry should e made in table CDHDR and CDPOS.
Please tell me the entire process how can i achieve this .Hi,
Tables / Functions:
The change pointers are stored in tables BDCP and BDCPS.
With release ECC 6.0 SAP delivered a new table BDCP2 for increased performance. Which table shall be used is defined in transaction BD50 (see below). There is a function to migrate “old” change pointers to the new table.
The function group BD01 contains function modules for reading and updating the new change pointers in table BDCP2.
BDCP
Change pointer
BDCP2
Aggregated Change Pointers (BDCP, BDCPS)
BDCPS
Change pointer: Status
Prerequisites:
There has to exist a Change Document Object (CDO) for the SAP-object we change. For standard objects like material masters, vendors or customers these objects already exist. For own business objects we have to define a change document object with transaction SCDO .
In the corresponding data element for the database field the flag „Change document“ has to be active. check the details in the transaction
The usage of change pointers has to be actived generally for the system
Transaction BD61
Maybe you are looking for
-
If I open too many Bookmarked pages into tabs my browser will hang and then sometimes crash or close unexpectedly. If I bring up task manager or use the Alt + Tab I can navigate to the window and right-click and choose restore to allow me to see the
-
ITunes 11.4.0.18 - iPhone 5s no longer recognized
Hi, I downloaded iTunes 11.4.0.18 this morning. Now my iPhone 5s is no longer recognized. It won't even charge from the computer's USB. I have Windows 7 on my PC. Apple Mobile Device Support 8.0.0.23 is installed. I even did a "repair" of it, and
-
Help problem opening dart for publishers in firefox and safari
I work with the banner software Dart for publishers at work on my pc but have a mac at home. Dart doesn't work with firefox on my pc so I would assume it would not work on my mac as well. My problem is it isn't working in safari either.. I can not ge
-
Powers on when I plug in headphones
How do I keep my iPod from turning on when I plug in the headphones? It does this even when I have the hold switch on, and it's really irritating. Love the iPod, but it turns itself on way too often.
-
ITunes Producer error - "This playlist has already been submitted"
Hi, I'm quite clueless here, and would be glad for any help or reference with this error. I'm an iTunes content publisher, and wanted to start working with Producer to upload new stuff. I created a new entry, will all details - but when i'm trying to