Mass deletio of CRM Middleware request loads

I want to code a program to do a mass delete of crm middleware request loads. I don't want delete all of them, just ones with certaijn prefixes. I'm able to make the program work if I do direct deletes of the tables smofrqhd and smofrqdt but, I know its a bad practice. I've tried to have the program execute function modle VIEWCLUSTER_DELETE_DEPENDENT but I am having difficulties formating the export parameter WORKAREA to where the program won't bomb. Any thoughts? should I stick to the direct table deletes?
Thanks in advance Tony Dagnillo

Answered

Similar Messages

Request Load status Done but customer not replicated

Hi,
Please help. We are trying to replicate customer from ECC to CRM using request load mechanism. The status of the request is done. It's not stuck in inbound nor outbound queue and did not create a bdoc error. However, when we try to check in transaction bp, still it did not exist.
Thanks!
Warm regards,
Mike

Hi Mike,
Was any BDoc created? If so, did it contain classic and/or extended data?
One thing to check is the filter settings in accordance with note 788822. (Missing leading zeroes is a common cause of problems.) Please also bear in mind that the filter settngs defined for the objec tin R3AC1 are always applied in addtion to the fitlers defined for the request itself.
I hope this helps.
Brian.

Request for cookbook for internet sales and CRM middleware

Hi
can anybody send cookbook for internet sales and CRM middleware. Your response will be rewarded.
please send to : [email protected]
thanks and regards
bhaskar

Hi Bhaskar,
I have sent you the required docs for Middlware and Internet Sales.
Reward points if it helps.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left.

Using SAP PI instead of CRM Middleware

Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AM

Hi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware.

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Version Compatibility of SAP R/3 4.6 C with SAP CRM 5.2 + CRM middleware

Dear SDN team,
We are trying to Integrate SAP R/3 4.6c with SAP CRM 5.2 using CRM middleware.
We wanted to know the following :
1.Technical and Functional feasibility in integration of CRM 5.2 and R/3 4.6c. What are problems for these versions ? ( In Brief )
2.We are trying to move the Objects BP , Quotes and Products from R/3 to CRM 5.2. Has anyone done this and can someone give us a brief description of the problems while doing the same
3.Any other useful suggestions would be very helpful regarding CRM middleware.
Kindly reply on this post . Points would be awarded.
Thanks and Regards
Dinesh and Ritvij
Email : [email protected]

Hello Ritvij,
Regarding middleware ,are you down loading plants? bacause down load object objects DNL_PLANT is obsolete.
Unusable middleware objects :
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
and the master data objects
MATERIAL
SERVICE_MASTER..
Find composite note for middleware at 872533..
What is the leading system for Order creation?
Please refer notes 490932 for more info about transactional doc replication between the two systems.
Please assign points.
regards,
Muralidhar Prasad Chatna

Is CRM Middleware Expertise Required if no R/3 Is In Scope?

Hello CRM Community,
I'm an XI developer, and I'm trying to get a handle on exactly when CRM Middleware (& thus a Middleware Resource) is required, and when it is not.
If a customer is implementing CRM 5.0 (with IC Web)in a landscape with non-SAP applications, would they necessarily require a Middleware consultant?
And if so, to what extent would that requirement be reduced in comparison to an implementation which interfaces to R/3?
Thanks in advance,
Jimmy

Hi,
CRM middleware is used in CRM whether or not the system is linked to other systems (SAP or non-SAP). CRM is based on it. Eg. whenever you create or change an object in CRM, a bdoc is created which contains the data.
The question is whether you'll need to use, influence or change the middleware in your project:
Image having integration with R/3: then you'll need the middleware for setting up the distribution (initial/delta load) between CRM & R/3. But as long as you stick to the standard solution, this will be very easy to setup.
Imagine having integration to other systems: then you'll need the middleware to interface to them (which can be done using idocs or XML).
Imagine having a CRM-MSA implementation: then the middleware is used to send data to the MSA client. This means setting up the data-distribution to the clients, which can be quite complicated.
Imagine having a stand-alone CRM system with an IC webclient and flows limited to the CRM system: then a middleware consultant won't have to much work.
Michael.

CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT

Hello All,
I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
Can anyone please tell me how much time it takes to download these objects because I had started the Initial Load for 4 Objects out of which the 1st object took 4 hrs to be downloaded!Please help.
Thanks & regards,
Disha D

Also I got an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
The main program was "BBP_PRODUCT_SETTINGS_MW ".
The termination occurred in line 44 of the source code of the (Include)
program "LSMSGU02"
of the source code of program "LSMSGU02" (when calling the editor 440).
What customizatuon/configuration settings are required for this report to be executed succesfully????
Disha

CRM Middleware -XI-SAP-ISU

Hi all,
1) In connecting between SAP-ISU and SAP-CRM we have CRM Middleware. People are having second thought that it can be done by XI bcz of volume of data from SAP-ISU to SAP-CRM
Can anybody suggest me which one we can suggest?
2) In connecting with telephone system to CRM they have already some in built mechanism to connect with CRM , now they are having second thought that we can use XI between
Can anybody suggest me which one we can suggest?

Hi venu,
I hope the following documents ll be useful to u.
For XI
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
BW WITH SD, FI, CRM:
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
CRM to BW extraction:
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
check threads for possible 'error' happened
CRM Data source issue with Delta Load( For BW Gurus only)
Re: Activities : 0CRM_SALES_ACT_1
Re: CRM Service Contracts : no records with 0CRM_SRV_CONTRACT_H
Hope it helps...let me know
Regards,
R.Ravi

CRM Middleware document needed

Hi everybody... If you have any helping documents or tutorial documents on CRM Middleware, please send me.
Thanks.

Hi Ravi,
Please check the Middleware wiki page, especially the MW Survival Guide. This is a work in progress which I'm updating as I can. Theres also some documentation here on Conntrans and Groupware.
[http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Middleware]
Check also the BestPractice for BDoc Analysis gudie attached to note 768503.
You could also request training on CR500 course - but I'm not aloowd to send the relevant material to customers.
Hope htis helps.
Brian.

CRM Middleware Object extensions

Hi All -
Can someone send me the "CRM Middleware Object extensions for custom Bdoc developments/Bdoc Modeling" book and any stuff on Business Transaction Events (BTE)?
TIA,
Aarthi.

Hello Davy,
please do not request documents to be sent via Mail. Have you read Links to CRM Documentation.
Regards
Gregor

CRM Middleware R&R Queues CCMS

Hello,
In my solman, ALAERTDB (table used by CCMS alert) keeps feeling (11 alarms each 5 minutes),
with MTMCNAME=CRM Middleware R&R Queues.
How can I know the source of these alerts?
Thanks in advance for your answers.

Hi Madhu,
Contract Account on ISU is Business Agreement on CRM. Please refer the following path to get the load guide for contract account.
The SAP Service Marketplace, http://service.sap.com/utilities => Product Information => mySAP CRM for Utilities => Cookbooks & Guidelines => IS-U Specific Set-Up and Load Guide for Business Agreement / Contract Account.
Reward points if it helps.

ERROR(No text fould) for a request loaded into InfoProvider.

Dear Experts,
I'm facing a typical problem. The regular data loads used to be fine. Since past 2 days, when the loads happen through the regular PCs, in some DSOs I find in the Datasource Name column DataSource Name and (No text Found),. The Sourcesystem column shows ERROR and the source system description shows ERROR(No text found). Although, the status of request loaded is green and is available for reporting. But in the next load it throws error saying the previous load is incomplete or improper.
Any help would be highly appreciated.
Thankx and Regds,
Kaushik

Thankx Srinivas for the reply.
But there have been no changes whatsoever, in the source nor in the BI Models. And it is happening continuously for the 3rd day. When I delete and reload, it just works fine.
Regds,
Kaushik

SMOEAC - CRM Middleware

Hi guys,
I configured the CRM middleware component to replicate materials,services and config objects but in the SMOEAC trx, on site selection, there only appears the CRM site, but not the R/3 backend site.
Table SMOF_ERPSH shows the following:
RFC DEST    ERP RELEASE ERPLOGSYS SITETYPEID
none              --                       -                       CDB
SRP             700                    SRP                  CRM
SRP is the Destination RFC defined in SAP R/3 and also the logical system ID of our SRM 5.0 System
What went wrong? How to resolve it?
Thanks for any help.
Aart

Hi Consultoresvision,
Can you pl. tell me what configuration you need to maintain for CRM middleware components.
After client copy for SRM 4.0 from Production to QA, the SMOEAC is totally erased and there is no objects. I am aware of how to create sites for R/3 and SRM after the object of "Site" is available. But here the object "Site" itself is missing.
Any inputs would be appreciated.
Thanks
Venkatesh

How can I send an update to CRM Middleware after changing BUPA longtext

Hi folks,
I am looking for the easiest way to send an update/insert of BP longtext change to SAP CRM Middleware (& MobileSales). I have implemented save of the text with function save_text within of a CRM application for changing bp data.
Text is available to standard CRM transaction bp, but now updates have been send to subscribed Mobile Sales clients.
I have already checked the bapi_bupa* functions, but it seems that they contain no notes/longtext segment.
Thanks for any help.
Daniel

Hi Daniel,
just wondering if you had a solution for this as I have the same issue to solve as well.
thanks, regards.

Mass deletio of CRM Middleware request loads

Similar Messages

Maybe you are looking for