Mass download of condition records from ECC to CRM
Hi Team,
We need to download many condition records from ECC to CRM. We are doing a request download but it takes lot of time. Is there a way to do a mass download of condition records form ECC to CRM.
Regards,
Jan.
Hi Robert,
We have all the articles in CRM but the prices are not matching for 2000 articles. Kindly suggest us in doing a mass download of the condition records for those 2000 articles.
Regards,
Jan
Similar Messages
-
Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM
Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
RjHello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva. -
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components SAP Products Basic Settings Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management Transactions Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty -
Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3
Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
ShubhamHi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal -
How to replicate a customized condition table from ECC to CRM
Dear All,
We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that? What replication object should we use?
Thanks in advance!
ErinnHi,
Use DNL_CUST_CNDALL, this would create the database table in CRM. Also you might need to run other loads corresponding to your scenario like DNL_CUST_CND_PR, DNL_CUST_PRC etc
Regards
Prasenjit -
Object Class Invalid when downloading the pricing procedure from ECC to CRM
Hi,
I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
When I check in R3AM1 status is Red.
The following Error have been found in SLG1
Object class invalid
Error in inbound data check
Message no. CND_MAP120
Diagnosis
During the receiving inspection, serious errors were found in the consistency of the exchange object.
System Response
Data exchange is terminated
Data exchange terminated
Message no. CND_MAP122
Diagnosis
Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
The following Error has been found in SMQ1
R3AD_CONDITIONS STOP
Details of STOP
Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
I have checked the connection, everything is perfect.
What may be the problem?
ThanksHi,
Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
SMOGGEN
. After this, try re-running the load.
I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
SMQR
and then debugging the inbound queue from the same trx. after re-starting the load.
Reward if this helps!
Regards,
Sudipta. -
Mapping error while downloading the condition records (ECC to CRM)
Hello Experts,
We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
Error when carrying out delta download (Message class: CND_MAP)
I am a technical guy and dont have much idea in CRM Middleware.
I welcome your valuable thoughts and will award full points.
Regards,
JeoHi,
As you mentioned i checked for the followings:
>>In Maintain field catalog:
I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
>>Create condition tables:
I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
Please suggest me, now what i need to do?
Regards,
Jeo
Edited by: Jeo Denson on Dec 1, 2011 4:11 PM -
Downloading Pricing condition records for products from ECC to CRM
Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu -
Condition records not generated in CRM from ECC
Hi all,
I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully.
I got all the condition types, access sequence and tables.including CUSXXX tables.
I have also got few condition records for condition types SAPXXX . I am not able to get the condition records for the CUSXXX tables.
Suggest me how to proceed further.
Regards
Yaswanth.KYes I have checked the SLG1. There were one error..
"No Entries Determined for the A Tables (Block 1)"
I am not able to judge how to proceed with that error.
The detailed Text is diapleyed under..
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Regards
Yaswanth.K -
Error in BDOC while uploading the pricing condition record to ECC from CRM
Hi all,
I have created a condition record for ECC pricing condition type (I have maintained all settings required for maintaining ECC condition type in CRM 7.0) in CRM 7.0. But theis condition record is not uploaded to ECC. I have checked BDOC, it is showing with error status for BDOC type "CND_M_SUP". The errors are as below.
1. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
2. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
3. Service that caused the error: CND_MAST_INT_DEEP_MB_TO_SBDOC
Message no. SMO8047Diagnosis
A service caused/ reported an error.
Can some one help me in fixing this issue please.
Thanks in advance,
JM
Edited by: JM on Sep 7, 2010 4:46 PMHi,
sBDOCs are not used in ECC to CRM or CRM to ECC data replication scenario. You can either ignore the error or disable mobile bridge.
Regards
Prasenjit -
Unique data record means you can't update a record from ECC with same key.
Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
YorkHi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini -
Payment methods download from ECC to CRM
Hi Masters,
Due to some requirement, new Payment methods customised in ECC so have to download from ECC to CRM. How it download through delta download. Existing payment methods data updated with adapter object name # CUST_TSP_WRITE and table name # CRMC_BUAG_PAYM in crm. iam new to crm plz Could anyone tell me step by steps.
its urgent.......... plz........
thanks in advance.
Regards
SriHi Sri,
Payment methods maintained in ECC can be replicated to CRM via CRM download object DNL_CUST_PAYM in transaction R3AS in CRM. This updates the associated CRM table CRMC_BUAG_PAYM and CRMC_BUAG_PAYM_T.
If you wish to create payment methods directly in CRM, then you can do so via customizing in CRM through transaction SPRO >
Customer Relationship Management > Master Data > Business Partner > Business Agreement >Define parameters for Business Agreement > Define Payment Methods.
I hope this helps.
Best Regards
Gavin -
Download only selected record from ALV
Hi
I want to download only selected records from ALV output with button.
i hav to fix the button on ALV screen using &ZDL whenever user presses the button record should be downloaded.
Pl with coding
its very very urgent.Hi ,
i dont have the exact code which suits to your requirement
but declare the internal table
like
data: begin of itab occurs 0,
check type c,
fields
end of itab.
while filling the field catalog
fieldcatalog-checkbox = 'X'
for this check field.
and display the grid
now write this subroutine
*& Form USER_COMMAND
Called from within the ALV processes. Currently, '&IC1' is used
to process the hotspot and display the document 'picked' by the
user.
PV_UCOMM contains the sy-ucomm from ALV
SELFIELD is a structure that contains all the data required to
process a user selection. The following is an example
of the SELFIELD structure and sample values:
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE PV_UCOMM.
WHEN '&IC1'.
loop at itab where check = 'X'.
append all these records to another internal table itab1
endloop.
call function gui_download.
pass the internal table itab1 in the tables statement
and also you have to give the file path that may be static or dynamic
if dynamic you have to call the function module
f4_filename
and get the filename and pass the same value to gui_download
that will be download to the above said path
endcase.
end form.
reward points if helpful,
thanks & regards,
venkatesh -
FM FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE
Hello vikas,
I need to develop a interface program FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE.
Is there ay function module to update or create the condtion records,
if u have any example interface program to update conditions records please send me.
regards
ram.This must be your compiler output.
Basically, it is telling you two things that are wrong - in syntax.
1. On line number 11 of the file RationalCollection1.java, the compiler expects a type identifier - that would be the object or return type such as int, String, boolean, etc.
The reason it is doing this is probably due to your not ending a previous statement - like the "expected ';'" error statement. Check your code, make sure that methods (brackets) are closed correctly and there are no open statements (i.e. missing the semi-colen at the end).
2. On line number 33 of the file RationalCollection1.java, the compiler expected the closing bracket. Thus, you didn't put the bracket where the compiler wants it.
It appears that you have skipped some lines of code. Those lines are the problem, post them - post lines 30-36 and 9-15 so we can see what is happening around those error lines. -
Mass maintainance of condition records?
Hi
I want to know the concept of mass maintainance of condition records in SAP-SD-Pricing.
ThanksHi Subhash,
For Mass Maitenance or Loading of Pricing Condition records, you can use LSMW. Here you can choose either a Standard Batch Input or Recording, or BAPI
The easiest what I felt is Recording. here if you opted to change condition records (you can choose VK12 as the T code) else if you wished to mass load the condition records you can choose VK11 or VK15.
once the recording is complete, you need to give a name to your recording, and then assign a Data structure name to it. after which you can assign the source fields. for this first you will create a list of source fields which you can get by checking what you have recorded, and pick the fields. (as there is an option to see the object list of your recording thus you can identify the recorded fields).
once the source fields are created, you need to map the source field with the source Structure. you can select each field and click the assign button which will pop up a list of the recorded fileds, you can then assign each of them to the respective source fileds. (this is what we call source field mapping)
The Next task is to specify and assign an input file, for LSMW script to read and convert. This input file should have all the records that you wish to add or change as per the source field record structure. You can create the input file as an XL file with all the data, and then save it as a .CSV file. and then specify during the assign file as it is a comma seperated delimiter.
then Choose the convert option to do a data conversion, and then finally process the Batch session, to check your results.
LSMW will successfully change or create Mass data (whether master records for pricing codition or whether mass sales /purchase Transaction data )
Hope this may be what you are expecting.
cheers
Prasad
Singapore.
Maybe you are looking for
-
Cannot send emails from certain accounts
Gmail account sends and receives fine. Home email account receives fine but will not send unless I am home and connected to my wi-fi. Work email receives fine but will not send. All smtp servers for all accounts and AT&T smtp server are on. Suggestio
-
I need help with Actionscript 2.0
Ok so I am made a button using flash 9 and actionscript 3.0 then I sent it to someone and they told me to make it in flash 8 using actionscript 2.0 now everything works except for the button. The button keeps having errors so is there diffrent html I
-
Extracting data from an R/3 system to Xcelsius
Hi, Could you help me - what is involved in extracting data from an R/3 system (i.e. not BI) and getting it into XCelsius? My idea at the moment is to write an ABAP to extract the data to a Z table, and wrap it up in a web service, and access this fr
-
Process Monitoring match 4 Processes, but only one needed
Hello, i have a problem with the Process Monitoring Module in SMC 3.5. I will monitor one process with the name pmd, but 4 processes match on these chracters. How can i tell SMC that the Process Monitoring shows only the process who exactly Match the
-
Trouble with CS5 dreamweaver, spry, and lion
I just updated to lion. I was trying to insert spry code into a page and all that happens is dreamweaver quits. Am I missing something or need I simply need to wait for an upgrade to fix this issue?