Mass PO price change

Hi,
I want to change price of a number of PO's.
In mass maintenence T Code: MEMASSPO, net price NETPR is not available.
Any other ways to change price of a number PO's
Thanks NDS

Hi NDS,
Normally PO net price is derived trough condition values. It takes total value and then divide in the quantity. So it totally depends on the condition values.
So if the system allows to adjust values at line item level then it has different value when compared to condition values. so system wont allow to change it and that is the reason behind MASS hasn't NETWR field in it.
You can change it through a LSMW. Write a simple lsmw with "Batch Input Recording" and simply change the net price.
Hope this will helpful.
thanks & BR
sandun
Edited by: Sandun Sulakshana on Oct 9, 2009 7:24 AM

Similar Messages

BAPI_MATVAL_PRICE_CHANGE - Material price change - Error

Hello Friends,
I am using the BAPI function module ''BAPI_MATVAL_PRICE_CHANGE' ' for Mass
material Price changes. I am giving the following as input parameters
                   material
                   valuation area
                  price date
                  prices
I am not giving values for valuation type since we are not maintaining Valuation type
for any material in our company.
But the program is throwing Dump error " Valuation type need to be maintained".
What is the corrective action ?
In BDC for the same material price change in MR21, i am able to upload data even
without giving valuation type.
Hari Prasath.S

Hi,
check the material price changes made from MR21, it may have some default value set for valuation type if no it was not given.
You might have to pass this default value to the bapi!
Reagrds,
Sooness

Mass price change for inforecord

Hi All,
Can I do a mass price change for inforecords? We are in ECC 6.0....
I have checked transaction MEMASSIN but there is no field for price in this txn.
Regards,
V S

Yes it is Possible. But, not thru any Mass Transactions.
You need to Perform a BDC for ME12. Go to ME12 and Select Conditions Tab and Select the Gross Price Condition and Click on remove Line and Create New Gross Condition with New Price and Per Unit.
Hope it will Solve ur Query.

Mass price change

hi ,
Is there any Std T.code to do Mass price Change of Materials ?
regards
Mike

Hi,
You also have Tcode MASS for more mass modification.
Use object type BUS1001 and generate. Then you have to know the tables where the field you want to modify is.
Pick the fields in their folder and generate again. Then in selection pick the materials or use other selection criteria. Generate again.
In the upper side of the screen insert the data and click the button 'carry out a mass change'.
Follow the link for screen shots
http://www.sap123.com/showthread.php?t=172&goto=nextoldest

PO Mass price change

Hi all!
I want to change the net price for around 100 PO's. How to do this?
Thx in advance.
Yuvi.

Hi,
MEMASSPO is not ment for PO price change..can not be also
B'cos the Mass changing the price is so relevent..
It is generally useful for update the data like update Storage location..Deletion indicator, GR, IV update like that..
Try the BAPI
Thanks,
Kumar Arcot

Mass Price Change for Materials

Hi
How can I change the Mass Selling Price for Materials.
Thanks
Christine

hi,
you can update all the condition records for price using a BDC program. You need to take the help of an abaper to do this. Give him the table name and field name where the condition records are stored for the material selling price, and change it with the new value.
Hope it helps.
Thanks,
Sadhu Kishore

Price Change after Cancellation

Hi,
My skype with Philippine calls before was €35.99 for 800 mins. Then I cancelled it for a month and it gives me how many days to reactivate my account in its current settings. The only thing is when I reactivate it, there is a new price of €49.99 for 800 mins.
Has the price change for skype calls in the Philippines?
Can skype be able to change me to its orignal pricing before my cancellation?
Kindly please advise.
Thanks
Best,
Vincent

Hi Anya,
Other than using VA02 and make an Update of the conditions at item level which is a big work because you will have lots of open sales order after so many months.
Use VA05, select your Orders and on the result screen :-
click Edit- > Mass Change -> New Pricing (menu).
or
if you don't want to do that Online, write your own abap report and use Function SD_BULK_CHANGE (check where-Used at SE37, Trace VA05 on how to fill the parameters, Function MPRF => New Pricing)
regards
sadhu kishore

Purchase order price change report

Hello
How to retieve the purchase order price change report ? do we have any standard report for it or any table which gives these data?
kindl

HI
Have you activate version management at your end for PO,i think this will help you to track changes of PO for qty,price etc.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/Version+Management]
Regards
Kailas Ugale

Price change summary report & approach of price change on Sales Orders

Hi,
I have made the setups for updating the price on Sales Order via profile options (i update the list price field on SO line the SO line price gets updated). The Customer have manual price overide in their existing system in place so they want same in oracle system as well. Their price change doesn't have any serious logic,,it is quite erratic based on market condition on that day.
(1) How can I get the report fro the changed price wrt price on price list for all the items on Sales Orders (during a period). It seems, Audit trial functionality for changing list price is not available.
(2) For the system whether required price change as above is better approach or maintaining new price list all the time is preferable option. In case of new price list, do we have any standard report which fetches itemwise price change details on Sales Orders for a period.
Thanks.
With Best Regards,
Nirabh Nayan

Nirabh,
Did you say you update the List Price itself in the Order Lines? In my opinion you should never update List Price. Set the profile OM: Discounting Privilege to 'Unlimited' to allow update of Selling Price, but switch off 'OM: List Price Override Privilege' for the responsibilities so that List Price field is not Editable. So that List Price always reflect the price with which Order Line was created (From the price List). Now create a custom report wherever Unit Selling Price does not match Unit List Price.
If you really want to go a little further then create a modifier with Application method 'New Price' that should kick in everytime the Unit Selling Price is updated. Let me know if that helped.
Dipanjan
Edited by: Dipanjan Maitra on May 25, 2012 2:25 PM

Price Change in iTunesconnect doesn't show up in the library. why?

Hello,
We are to have a app price discount event in a limited time. (Like 5 days)
Our current app's price is 2.99 USD, tier3. Target price is 1.99.
There was no problem changing price in itunesconnect. ( I already asked iTunes about this problem. it says "Bud inside your DPS app. other then that, that cannot happen")
But it never showed up in our library or store. (I've waited for over 3 days and see if it changes. But still no change in our app library. So, waiting for more isn't a correct answer. )
What I need to do was delete the whole app and reinstall the app. Then, the price change showed up.
Why? I can't make our subsribers and customers erase our apps from their ipads and reinstall.
[ Conditions ]
- We have done our IAP service for a few years without any problem
- iTunes contract&payment information was all correct.
- We build our app with Adobe DPS.
- and yes. Or fourse, I have our local sales company (in S.Korea) to help us. But so slow that I won't be able to open our price discount event on schedule.
Any possible solution? Please help.

Finder>Preferences>General: make sure that External disks is checked

How to register price change

We bought product from vendor.
We created A/P Invoice;
After checking, we found that the goods is not the same quality as promised.
We negotiated with supplier and they agreed to reduce the price.
How I need to process in B1?
I found that Credit Memo is used when we need to return goods (It subtracts from the inventory). I do not want to return, just only the price change. How to do?
Please advice.
Thank you.

You should use A/P Correction Invoice

Moving average price changed drastically

Hi Experts,
i having one problem,
i having material of ' A ' 1392.5 Kg having moving average price of 6.52 $ per kg (as of 02.03.2009 ),
i issued goods to order on 17.03.2009 with movement type 261 of 233.60 Kg for 646.74 $
here new moving average which systems shows for material 'A' is 2.77
please explain why system shows new moving aveage price as 2.77, also why is not considering old values to calculate MAP(stock already present )
Also please explain what could be the possible reason for this error.
Thanks & Regards
Prashanth.

follow this discussion, I think it has all you need to get your problem solved
moving average price changed drastically

Price changes in Scheduling Agreement

Hi,
What is the best way to handle price changes in a Scheduling Agreement? From what I saw, the validity periods of the prices maintained in a scheduling Agreement is based on the GR date. Is there any way we can change this? The requirement is to make the validity price work on the delivery schedule date.
Right now, whenever a price change happens, we have to add a new line in the scheduling agreement. This doesn't seem right. Please advise.
Thanks
Ranjeet

Hi,
Your date for pricing is controlled by Pricing date category u maintain in Vendor master >Purchasing view
If you select delivery date as your pricing and if there are many delivery dates the first delivery date is taken as
the reference for pricing
But if there is no much price variation between delivery schedule date and Goods receipt you can keep that as
goods receipt date
Check out whatever suitable
BR
Diwakar

Unable to prevent Price change for Outline Agreement

Dear Experts,
Once Outline Agreement is generated in SAP, I do not want to allow users to change the price.
I have tried with " Field Selection at Document level" using ME32-Change outline agreement field selection.
I select "Quantity and Price" and select check box Display for "Price and Price Unit",Price Date", "Condition Group".
This will not allow price change at item details level (field grayed out) but user can still select Item condition (for Example PB00) and change the price there.
Is there any solution for this ?
Ideally I want to do this for a particular Document type of Outline Agreement only.
Thanks and Best Regards,
Raju

Hi Ramki,
Thnka s for you reply.
This is not the desired solution. I can not ask Client to change to create different uses for create and change .
In the buinsess process , mostly create an change users are same for outline agreements.
I do not wna to restrict by User Authorization either as this is also not a 100% solution.
Still looking at configuration level only to restrict changes in Pricing for outline agreements.
Regards,
Mitesh Desai

How to set default value for Price Change Indicator in Purchase order

Hi,
While creating the service purchase order with item category "D" the price change indicator in the services tab of the purchase order is getting checked by default. I want to uncheck this by default.Where can we set the default property for this.
Thanks in Advance!
Surya

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

Mass PO price change

Similar Messages

Maybe you are looking for