Mass Screening in GTS

Hi ,
We are performing a Mass Re-screening of our business Partners against a Master SPL files in GTS system.
Currently the SPL Match percentage for Name, City, Street and Country are configured according to business needs.
Can some one please advise what are the standard proposed by SAP for the match term percentage.
Thanks in advance,
Sreekanth
Moderator message: apparently not related to ABAP development.
Edited by: Thomas Zloch on Apr 13, 2011 9:38 AM

hi,
where is this field? Is it transferred to GTS? If yes, I think you can add it to the SPL check in customizing similar to address fields. Nevertheless SPL list entries have no citizenship entries as far as I know (most of tham have only a name and a country), so this check would not make much sense.
Best regards,
Balazs

Similar Messages

  • Letter of Credit SPL Screening in GTS

    Hi,
    I want to perform SPL screening of banks on the letter of credit documents created in ECC.
    What document type in ECC to corresponding doc type in GTS
    How can I achieve that? Can anybody throw some light on this?
    Thanks,

    Please refer to the topic 'Integrating SPL Screening with Financial Accounting' in the customizing documents for details.

  • Automatic - SPL Screening in GTS

    Hello:
    Is there any specific setting in GTS for automatic screening of vendors and customers against SPL list.
    I mean whenever business partners are passed from ECC to GTS. The business partners are screened against SPL. how is this is being done? Is it this screening
    automatic implicitly
    I know that for the documents (sales orders, etc) there is a setting "SPL check when document saved/updated". But, how about vendors and customers, how they will scanned initially & later. Can anybody explain on this
    Thanks,
    Regards
    Chakri

    Hi Chakri,
    Seeing your note here reminded me that I owe you an email reply from a question you asked me in September.  Apologies for the delay - I just rolled off a project.  I'll reply to your email asap.
    In the GTS IMG, go to
    SAP Global Trade Services --> SAP Compliance Management --> “Sanctioned Party List Screening” Service --> Activate Business Partner at Business Partner Function Level. 
    This allows you to set the screening to 'synchronous' which means the screening happens automatically upon transfer to GTS for the master data.  If you still have questions, I suggest reading the documentation in the Performance Assistant.  If all else fails, set the config one way, then test it, then set it a different way and test it again to see for yourself how this functions.
    Cheers,
    - Greg Futrelle

  • Payment Document Screening for SPL

    Hi Guys
    I am facing some issues in doing Synchronous payment document screening in GTS.
    1) Is there anyway to recheck financial documents - Same which we do for Logistics documents via /sapsll/cuhd_mr_spl
    2) Is synchronous checks possible? Like the Purchasing docments where system will let you know as soon as you create a PO.
    While i am checking the Log its showing unable to determine active Legal regulations, this is only being shown for Payment documents.
    The scenario here is we create proposals and instantly do a Payment run, so synchronous check is very essential for us.
    Thanks
    Carl

    Hello Carl,
    1) You can use /SAPSLL/SPL_BLRL_FI --> Manually Release Blocked Payments, which enables you to perform again SPL screening.
    2) Synchronous screening can be set in IMG --> Global Trade Services --> Compliance Management --> Sanctioned Party List Screening --> Activate Business Partner at Business Partner Function Level
    Here you can set MKK (contract partner)  or SLLBNK (Banks) for synchronous. Response form GTS you will seen in Proposal Log (F110 transaction in feeder).
    3) For activation of Legal regulation check whether your legal regulation is active for your relevant country.
    Cheers,
    Gabriel.

  • GTS Stop delivery creation for blocked sales orders

    We implemented Note 579357 to stop the creation of deliveries when sales orders are blocked and everything works correctly except for rush orders (order type SO).
    After the note was applied, deliveries are not automatically created for rush orders even though the orders have gone thru screening in GTS and have been released.  Any solution to this problem???

    Dear GTS experts,
    I'm facing exactly the same problem with rush orders that Sammy Chan describes in his original post.
    I checked all replies but I have still no idea to solve this issue. The problem is that when creating the delivery during a rush order creation at the time the system reaches the copy condition with the implemented coding there is no order number available to check against in GTS.
    As the whole thread is marked as answered I hope someone can help me.
    Best regards,
    Ulrich

  • Scenario in GTS Compliance

    Hi
    Can anyone clarify me that, I have configured the Compliance sub-module in GTS for our business process. When I create a transaction in feeder system it goes to GTS then the screening process will start right... so my doubt is what is the sequence that the system will screen the GTS Sub modules if the Customer is under blocked list, Ship to party's Country (Importer country) is under Embargoed situation and the line item is having insufficient license.
    Thanking you
    Srikanth

    Hi Srikanth,
    The sequence is:
    Embargo check
    SPL screening
    Licence determination
    Dangerous Goods check
    Restitution determination
    Letter of Credit check
    Preference determination
    Hope that helps.
    Regards,
    Dave

  • Connection Between SAP GTS and Legacy systems

    Hi GTS Experts,
    Could you please let me know how to connect between SAP GTS and Legacy systems.
    This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
    Could you please provide any documentation on this and is it PI team will do or functional guy.
    One more question:
    Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
    Then it will be sent to SPL screening in GTS.
    Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
    Regards,
    Murali

    Hi Murali,
    Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
    Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
    Here, I would like to know if your legacy system had already some SAP system connected to it?.
    Regards,
    Aman

  • Initial load of material classification

    Hi,
    We want to start using GTS to maintain tariff codes and to assign materials to tariff codes. We will start off with loading tariff codes in GTS from a dataprovider. However, we do not want to start from scratch with assigning materials to tariff codes. This information is already available in our SAP system. Does GTS provide a way to import the existing SAP material master data and load it into the material classification in GTS? If not, what is the best way to start this effort?
    Regards,
    Ed

    Hi,
    There is standard transaction where you can do mass classifications in GTS but i think there is a limitation to 3000 products at a time and in my view, it is not very effective if you have hundreds of codes to be assigned to products and it is very time consuming..
    Alternatively, you will have to build a customised program and get all classifications saved in text file and load them up which is what i have done.
    In my view, after implementation of GTS, tariff and commodity codes ( Include Classifications ) are supposed to be maintained in GTS by ITC and transferred over to Feeder system ( Commodity code is the only master data to be transferred over from GTS to Feeder and there is a standard transaction for doing initial transfer ).
    Bad point about this standard is you will need to ask your Basis to activite the change log file in system to keep track when the commodity code is transferred.
    Thereafter, you must have batch jobs running regularly at GTS and Feeder to do the transfer.
    Im new in GTS so what i have said might not be entirely correct. Im still learning..
    Thank you.

  • PS CS3 extended "load files into stack" question

    Hi,
    I've been trying to use the "Load files into stack" script in PS CS3 extended but the problem is that if for example I have files with these names:
    File_1
    File_2
    File_3
    when I use the script it puts them together but in the wrong order so in my layers they are like this:
    File_1
    File_2
    File_3
    which would be wrong because the File_1 is my first image but it's the last layer so if I make this into a gif file and watch it, it would play backwards.
    I was wondering if there is away to fix this. thanks in advance.
    PS: If there is anything I need to provide to make it easier for you to help me, please ask.

    Thank you jugenjury for your fast replay, but let me explain what exactly I'm doing maybe it helps, I'm not very familiar with PS so I'm kinda confused about what you just said.
    I'm trying to make a .gif from an .avi file. I tried using the File>Import>Video Frames to Layers but I get all blank layers so I used another program to take mass screen shots. so I have 133 images which I want to make into a .gif file. I use the Load files into stack script then in the animation tool I select the "make frames from Layers". It all works out so far but the problem is that the video plays backwards because of the problem I explained in first post.

  • SPL partner function issue

    Hi,
    I have setup partner function LF(vendor) in SPL screening in GTS system.
    I have created a vendor and sent to GTS and got screened and no SPL block.
    But when I pass PO created using this vendor it says blocked for SPL.
    I see following 2 messages in spl log
    1.SPL screening for partner 46, partner role LF
    - partner address not found in any SPL list
    My comments - this is green and partner 46 exists and clear
    2.SPL screening for partner LF, partner role LF
    - partner address is identified in the boycott list.
    My comments - this is red and and there is no partner # LF, so why this entry being created. where this partner LF came from?
    Please advice

    hi,
    check also the applications log. That is, checkt the document within GTS again and analyse the detailes results. Are you using any kind of userexit during document transfer? Any idea from where the system could get LF as partner number? Check the document again. How did you set up LF for SPL? What exacty have you done there?
    Balazs

  • Field BSEG-MANST. does not exist in the screen SAPMF05L 0301 in mass update

    Hi,
    I am trying to perform a mass update of dunning data (level and date) on some open items. Using the mass change function through FBL5N, I receive the error message, and the update is not performed. I cheched with the layout editor, but the fields appears in the mentioned screen. The field is also allowed for modification in customizing, for the company code. I was not able to find the dunning fields in the field status editor, in customizing.
    Any hint?
    Thanks
    Massimo

    thanks, but it doesn't apply.
    More relevant is note 322163 Line items: mass change 'Payment Method' BSEG-ZLSCH, but this refer to a program error, our release is more recent, and, furthermore, the dunning fields aren't available for change in FB02.
    Regards, Massimo

  • 785gm-p45 + nvidia GTS 250 = 3 screens?

    I am fairly new to this sorta thing but i was wondering if there was any way to use the HMDI port on my 785gm-p45 and also the 2 DVI outputs on my GeForce GTS 250 to run a total of 3 screens? I've heard that some mobo's and do it and some cant but i haven't been able to find any information that has really helped me any so i figured this would be the place to ask...
    Any ideas?

    I have not seen any MSI board (or other brands for that matter) that can do onboard + PCIe cards at the same time.
    Sorry.

  • I can no longer mass delete mail because the pop-up "delete" at the bottom of the screen has disappeared. How do I get that functionality back?

    I somehow lost the ability to mass delete mail using the "edit" and check off function. The "delete" option no longer pops up at the bottom of the screen. Has Apple done away with this option in the latest software update or what?

    look here how to back up:
    http://support.apple.com/kb/HT1766

  • Add fields to Sales Order Mass Change  selection screen

    Hi,
    Li & Fung customer customer needs to include following fields in the selection screen (Header Level)  and the display output in Sales Order Mass Change (/AFS/MDC).
    -     VBKD-BSTKD_E
    -     VBKD-KDGRP     
    According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
    -     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
    -     /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
    Data selection part works perfectly, but if we do not enter any values in any custom field in  the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
    The system should display all custom fields values even if we did not input them as part of the selection screen
    I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
    thanks very Much.
    Nilmini

    Hi Nilmini,
    In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
    Regards,
    Jelli

  • Problem with adding new field to the mass change screen in FBL5N

    Hi,
    We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
    If you have faced with such a problem, we would be grateful if you give us some tips.
    Regards,
    Miłosz Włodarczyk

    The problem has been resolved: we didn't activate a code in SE80.

Maybe you are looking for