Mass storage not working correctly

So I've checked and all the setting are correct (or at least the ones I can get to), and I even ran the DOS program to fix it everything happens as described (program runs and resets phone...). I've always been able to see the phone in 'my computer' when it's connected and clicking on it I can see the 'memory card' and open it up too - it just is empty on the computer when it's really not. If I click the properties of the memory card it shows the real amount of free space and 0 used space, even though it's got about 500MB of stuff on it.
I can add files from the computer and they are copied and I can see them when using the phone, but if I delete them using the phone the computer still shows them as being there. If I try to open a deleted file it searches for a few minutes and then tells me the file cannot be found but it's still displayed as if it were there.
It's like the phone is hiding everything it does on the card. If I take the card out of the phone and plug it into the computer directly everything is there as it should be. This is really beginning to be a PITA and when I try to search for information all I find is stuff related to the mass storage mode not working at all, not malfunctioning as it is in this case. Any ideas?

I would recommend copying all the files from the Media Card to your PC, basically a backup of the card files.
Then reinsert the card in your BlackBerry, and format the card using the format command in Options > Memory or Options > Media Card, whichever is present for you.
Then on the PC, search ALL folders on the card folders and remove ALL "bbthumbs.dat' files, delete them. Get them all.
Now, connect and see if you can copy back your files to the card.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My E 7-00 mass storage not working

    i have nokia e 7-00 its giving an error massage disk error. I have tried to format the the mass storage with windows but windows also cant format it. So i want to know does the phone has a memory card inside it or its just a chip on the board? Please help me, i cant even take pictures or use the map.

    You will have to visit a Nokia Care Point which will be able to help you with this. A Care Point is not the same as a Nokia Dealer. You can find contact information through the 'Contact us > Visit us' section on this page.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Sorting not working correctly for date field in alv report

    Hi All,
    My report displays many rows also containing date type fields of bldat,budat .
    When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
    Ex:
    Invoice doc dat
    01-25-2011
    01-21-2011
    02-02-2011
    10-25-2010
    11-20-2010
    If I use ascending then it is sorted as :
    Invoice doc dat
    01-21-2011
    01-25-2011
    02-02-2011
    10-20-2010
    10-25-2010
    Why the sorting is not working correct for year.(2010 records should have been first).
    The field wa_tab-bldat is of type char10.
    It is populated as wa_tab-bldat = bsak-bldat.
    Kindly suggest what can be done.

    The field wa_tab-bldat is of type char10
    Then what it does is correct.
    Refer to type datum...it will work

  • If statement within a view is not working correctly ?

    Hi all,
    maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
    I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if not isframe is initial. %>
      <htmlb:content design="design2003">
         <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    hallo world
    <% if not isframe is initial. %>
         </htmlb:page>
      </htmlb:content>
    <% endif. %>
    thanks in advance and best regards
    Matthias Hlubek

    Matthias,
    The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if isframe is <b>NOT</b> initial. %>
    <htmlb:content design="design2003">
      <htmlb:page title = "Top Level Navigation view">
        hallo world
      </htmlb:page>
    </htmlb:content>
    <% else. %>
      hallo world
    <% endif. %>
    So why does your example not work? Let us start with a simple tag:
      <htmlb:page title = "Top Level Navigation view">
      </htmlb:page>
    Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
      ENDIF.
      tag->DO_AT_END( ).
    You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
    <% if isframe is NOT initial. %>
      <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    <% if isframe is NOT initial. %>
      </htmlb:page>
    <% endif. %>
    And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
    if isframe is NOT initial.
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
    endif.
    if isframe is NOT initial.
      ENDIF.
      tag->DO_AT_END( ).
    endif.
    You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
    The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
    brian

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Key Figure calculation in Abap is not working correctly - Overlooping

    Hi,
    I wrote a logic to calculate the ratio of key figure but it is not working correctly
    For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
    So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
    Sample
    A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 = 200
    PRODUCT3 0.7 = 1000 * 0.7 = 700
    The total amount of this new products is 1000.
    Now my logic is working this way.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
    PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
    Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
    Logic used
    DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
    DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
    DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
    DATA: amount LIKE data_package-netamount.
    DATA: zidx LIKE sy-tabix.
    REFRESH t_data.
    LOOP AT data_package.
      zidx = sy-tabix.
      MOVE-CORRESPONDING data_package TO t_data.
      REFRESH t_newdso.
      SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
      data_package-prod.
      SORT t_newdso BY prod.
    *LOOP AT T_NEWDSO.
      READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
      IF sy-subrc EQ 0.
        LOOP AT t_newdso.
          t_data-prod = t_newdso-/bic/znew_mp.
          t_data-material = t_newdso-material.
    *T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
          APPEND t_data.
        ENDLOOP.
      ELSE.
        REFRESH t_olddso.
        SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
        data_package-prod.
        SORT t_olddso BY prod.
        READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
        t_data-prod = t_olddso-prod.
        t_data-material = t_olddso-material.
        APPEND t_data.
      ENDIF.
      MODIFY data_package INDEX zidx.
    ENDLOOP.
    REFRESH data_package.
    data_package[] = t_data[].
    thanks
    Edited by: Matt on Sep 27, 2010 2:25 PM - added  tags

    Hi,
    I am not really good at debugging Abap code since I am a newbie. however  I have tried to add CLEAR T_DATA before the first loop.
    REFRESH T_DATA.
    LOOP AT DATA_PACKAGE.
    ZIDX = SY-TABIX.
    MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
    and before the second loop and select statement and at the end of the loop.
    REFRESH T_NEWDSO.
    SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
    DATA_PACKAGE-PROD.
    SORT T_NEWDSO BY PROD.
    READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
    IF sy-subrc EQ 0.
    LOOP AT T_NEWDSO.
    but then not all data are being fetched.
    thanks
    Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

  • Email pushing not working correctly for office email - 3 seperate devices/carriers

    We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
    I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
    I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
    Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
    User 4 is on the older nextel blackberry push to talk, and is not on outlook. 
    We do not have an exchange server. Our emails were all set up through our devices.
    Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
    Thank you in advance for any suggestions.
    Caitlin Talbot 

    Potential solution for windows for a side-by-side install. This works for me.
    To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
    The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
    I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
    + Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox 4\firefox.exe
    + Open profile manager. Start > Run : firefox.exe -ProfileManager
    + In profile manager create Two Profiles.
    firefox3.6
    firefox4
    + In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
    + Create two windows shortcuts.
    * General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
    * General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
    That's it. Links from external programs should now open in your default browser.
    Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

  • I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
    IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
    Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
    As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
    Egypt authorised service providers : https://locate.apple.com/eg/en/

  • SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

    I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
    I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
    It is working correctly in the report manager.
    <Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
            <OverrideNames>
                <Name Language="en-US">TAB delimited</Name>
            </OverrideNames>
            <Configuration>
                <DeviceInfo>
                    <FieldDelimiter xml:space="preserve">&#9;</FieldDelimiter>
                    <Encoding>ASCII</Encoding>
                    <UseFormattedValues>False</UseFormattedValues>
                    <NoHeader>False</NoHeader>
                    <FileExtension>TXT</FileExtension>
                </DeviceInfo>
            </Configuration>
          </Extension>

    Hi Dave0323,
    According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
    In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
    update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
    file like below:
    The result looks like below:
    Reference:
    CSV Device Information Settings
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Text formatting in Numbers is not working correctly.

    In Numbers on Chrome text formatting is not working correctly, it's almost as if a CSS file is not being loaded. To be precise, when I try to make a cell Bold there is no bolding. I am using Arial as a font. This has been an issue on Mac and Windows. Any ideas?

    Do you have the same problem with Safari or Firefox?

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Screen Not Working Correctly- Horizontal Lines

    For the past few weeks, when I open my computer, sometimes the bottom half of my screen is just a lot of lines or is not working correctly. Sometimes if I tilt the screen enough, it will go away. But I don't know what to do!

    First step in user troubleshooting is to turn the phone off and back on. If that doesn't help, then a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will restart. If this does not solve it, then a restore from backup, and finally if necessary, a restore as a new device.
    You do not indicate what iPhone version you have. You also do not say if the phone has been dropped or any user damage to the screen. If anything, you can make an appointment with the Apple Store Genius bar to get the hardware checked.

  • Share point in server admin not working correctly... I think

    I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
    afp://server.mydomain.com/Users
    However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

    Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
    On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
    All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
    Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Maybe you are looking for

  • Old iCloud Account

    Hello, Everyone.  I have an iPhone 5S with a iOS 7.1.2 version.  I am giving it back to my company to get a new iPhone with a different cell carrier, so I want to restore it to its factory settings.  To do that, I must turn off the Find My Phone app,

  • Variable Name Problem

    Hi all, By refering flash remoting variable declaration documents, it says we can have a variable with $ and _ as a part of the variable. i am using Flash Media server2, And PHP (version5.0.5); for remoting. when ever i used variable name with _ crea

  • Web Dynpro & Adobe Interactive Forms - how to update the context node

    Hi Experts, I got a WD Component with some context nodes that are mapped to some views and are filled in this views. These context nodes are the dataSource for the Interactive Forms. These forms are embedded in a view by UIElement Interactive Forms.

  • Does the plantronics marque m155 work with the iphone 4S?

    does the plantronics marque m155 work with the iphone 4S? can you use siri with the bluetooth headset

  • Complete Your Season question re Game of Thrones

    I've bought two episodes of Game of Thrones Season 1 through iTunes and would like to take advantage of the Complete Your Season offer. But whilst I can see the series I want listed under Complete Your Season and I can see that two of the episodes ha