Mass Upload of Define Mode Combinations_PPDS to SNP PPM

Dear All ,
I am converting huge numbers of PPDS PPMs to SNP PPMs , I would need your support in telling me a mass upload ( program ) for defining Mode Combinations transaction .
As such a BDC has been prepared but that takes a very long time for pushing data in this transaction .
Thanks and Regards ,
Prashant Kumar

Dear Murali ,
I have specific field values e.g. variable lot size , without PPDS Campaign , Blank Mode Combination to be selected .
When we select the PPDS PPM no. or Product Location Combination inserting all these values in the table after execute done on the selection screen needs manual entry of all the field values .
Data is really very huge and was wondering if there could be a quicker way out . There is more SNP PPM converted from PPDS PPM due to alternate modes of 10-15 in many of the PPDS PPMs .
Would appreciate any further help .
Thanks and Best Regards ,
Prashant Kumar

Similar Messages

Upload single level variable cost in SNP PPM in mass by MASSD

Hi experts,
I am trying to upload single level variable cost in SNP PPM in mass by MASSD by following selections:-
Selection
Object Type:- PPM
Selction Criteria:-
Component:- Plan        Attrib:- Use of Plan
Component:- Plan        Attrib:- Plan
Components & Attributes to be Maintained
Component:- Plan        Attrib:- Var.Sing.Lvl Costs
While maintaining the cost, under selection criteria, compoment: PLAN and attribute: PLAN I am unable to maintain multiple plan names.
The single level variable cost that I have to maintain for all these plans is the same and therefore was trying to use transaction MASSD
Can you please throw some light on how multiple PLAN selections can be done?
Regards
Chetan

DEAR GURUS,
*There is a question regarding the resoucre consumptions relevant to PDS in SNP,*
****The inputs are:****
****1) Base Qty= 7700 TH****
****2) Set Up =45 MIN****
****Resource consumed by operation activity is 112 207 seconds = 31,17 hours.****
****Unfortunately we didnu2019t understand how this figure is calculated.****
****Can you please help us in this****

Mass upload contract with "Distribute Contract to Catalog" flag

I need to mass upload contract to update the flag "Distribute Contract to Catalog" (for srm mdm). What are the options. I don't see any option of that flag in the screen "Change Contracts: Mass Processing"

Solved on own
One needs to maintain System type as 'CATALOG' in SPRO >Define Backend Systems.
This makes the Distribute Contract Catalog check box to be visible in the Header tab of contract.
Regards
Sarath

Mass upload in KM maintaining the up-to-date versions of documents

Hello guys,
I need to do the Mass Upload in Repository Manager (persistence mode DB) in KM.
My documents are stored in a file system, where they have versioning control. I need to upload the documents in portal with the up-to-date version.
I have activated the versioning in the folder that I intend to upload the documents, but when I have done the upload, the documents have stayed with versions number = 1.
Could you tell me what I need to do for upload the documents with the up-to-date version number, for example, if a document in file system has the version number 5, when I do the upload in the portal, the document should stay with the same version, 5 instead 1.
Regards,
Mary

Hello Julian,
Thanks for your help.
There is only one document. There arenu2019t any old versions of document, the version of the document is kept by the author in the document, but only as a reference, to indicate that the document already was modified x times.
The situation is like that:
You open the Microsoft Word application and you created a document.
You have the necessity to modify the document.
You open the document and modify it and save it.
Now the document has 2 versions, but the document is the same, no document is created from this.
Inside the document in the second page, the author kept the versions, for example, the author creates a table where he specify the document version, like that:
Version     Date            Author
01      13-08-2008        Mary
02             14-08-2008        Mary
I want to know what I need to do for when I upload the document in the portal, itu2019s appears with versions = 2 instead 1.
Any idea about it.
Regards
Mary

Mass Uploading of Result Recording + Usage Decision.

Dear Gurus,
Are there any BAPI or BADI to Mass upload RESULT RECORDING(t code QE23) + USAGE DECISION(QA11) through an excel in the fore ground mode and back ground mode
Regards
Shoib

RESULT RECORDING : BAPI_INSPCHAR_SETRESULT
UD: BAPI_INSPLOT_SETUSAGEDECISION

I want to change Material Type for mass upload.(MMAM)

hi all,
I want to change Material Type for mass upload.(MMAM)
Suggestion pls? or Any BAPI is availablre?
Edited by: abap_friends on Jan 6, 2011 7:12 AM
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 6, 2011 11:27 AM

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

Mass upload of BP into CRM

Hello!
I peform mass upload of BPs into CRM. I use FM BUPA_CREATE_FROM_DATA to create BP itself and BUPA_ADDRESS_ADD to save BP addresses and call these FMs in the same turn for each BP.
So, if I do that for 1-2 BPs, it works perfectly. All BP are saved in CRM with there addresses on COMMIT. As soon as the number of uploaded BP increases(between two commits), for example, up to 100, there is an error happens: E831(AM) in ADDR_MEMORY_SAVE.
As well as I understood, it happens because of address saving peformed before BP saving on commit. I tried first to save BPs only (with commit) and then their addresses, and it worked on mass upload without any error.
So, is there any idea about how to upload each BP with his address simultaneously without any error by mass upload?
Thank you.

You can upload millions of records using these function modules.Infact I am doing the same.
Make sure that the data structures,tables which are passed to the Function modules are cleared for each time and FM's should be in the below mentioned order.
BAPI_BUPA_CREATE_FROM_DATA
BAPI_BUPA_ADDRESS_ADD
BAPI_TRANSACTION_COMMIT.
Thanks,
Thirumala.

Mass upload of Material

Hi,
we have to do mass upload of material master which includes lot of classification / characteristics for a plant. could you please let me know how do we do this and which is the best method? ( BAPI or BDC)
Thanks
Arun Vijay D

Hi,
Use direct input method using LSMW. The details are as:
For material master data:
Object: 0020
Method: 0000
Program: RMDATIND
For material classification
Object: 0130
Method: 0002
Program: RCCLBI03
Regards
Amit

Mass upload of batch chracteristic Values using LSMW

Hi,
Is there any way from which I can mass upload the characteristic values of batch class.
LSMW- Bapi issue full in this case or have to go with recording or BAPI programming?
Please let me know the process.
Thanks in advance
Ravi Kumar

Hi
Thanks For the help. I have used LSMW Direct input method.
I have used the below format in text file
Class/mat    batch             class                              char                                 Char Value
023     Bunny 1011010     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     164.95
023     Bunny 1011011     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     164.61
023     Bunny 1011012     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     162.71
Its giving below error,
Error Changing Classification Data
Other
( CLAP_DDB_UPDATE_CLASSIFICATION: exception    13 )
023 Bunny 1011010                                      ZZ_COTTON_CLASS
Error Changing Classification Data
Other
( CLAP_DDB_UPDATE_CLASSIFICATION: exception    13 )
023 Bunny 1011011                                      ZZ_COTTON_CLASS
Thanks & Regards
Ravi Kumar

Mass Upload of Photos in Portal

Hi,
I am trying to do mass upload of JPEG Photos.
I have tried using User Self Service and that works fine.
Reqmnt is that administrator needs to upload 100 photos as a bulk for each user.
I have read the document on help.sap.com and it certainly gave me few insights but if anyone has done this before, i would like to steps on how to go about doing this.
Regards,
Dev

Hi;
Assign yourself to the role
pcd:portal_content/com.sap.pct/Collaboration/DemoRole
After that you will have the Link
"Collaboration Demo\People Centric"
This gives you the possibility to make a manual or
mass upload of user photos.

Need to create a mass upload program for appraisal document creation for multiple employee

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi Priyaranjan,
I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
Even tcode also u can get it prepared by Abap'ers.
Thanks and Regards
Balaji

Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi,
I have done appraisal document creation for bulk using txt file.
this fm used for single for creation in standard tcode (phap_prepare): 'WZ_HRHAP_0DOC_WZ01_START'.
So create ztcode usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
While recording for single I have used manual option instead of automatic .

Mass upload of commodity code VEU4

Hi,
While doing Mass uploading of commodity codes using VEU4 for Non European Clountry, for the Additional Info field NIHON , system by default generates =2 but our requirement it has to have a default value=0 which is to be used for both Import and Export.
How to make the field NIHON value=0?
Is it in the Text file or somewhere in the config?
Regards,
Vengat

Hi Jurgen,
Thanks Very much, it helped.
Actual my requirement is to load the Commodity codes with the Field NIHON = 0 so that the commodity can be used for both Import and Export.
If I upload the text file in VIU4, by default system takes to NIHON = 1,
If I upload the text file in VEU4, by default system takes to NIHON = 2.
As mentioned in the OSS 1034696
If you confirm the dialog box with 'Yes', the system checks whether the 'Additional information' indicator of the old entry and the new entry are set differently. If this is the case, the system sets the 'Additional information' field to value 0 (Receipt / Import and Dispatch / Export).
Hence I have to execute the file in VIU4 or VEU4 for the first time to mass load of the commodity code ( by default it takes 1 or 2)
So to change the value from 1 or 2 to 0, need to execute the same file second time with YES in the dialog Box for the same data.
Note sure why SAP is so rigid here in this field NIHON as the same can be one of the Selection field.
Regards,
Vengat
Edited by: Vengata Raghavan on Aug 12, 2011 4:54 PM
Edited by: Vengata Raghavan on Aug 12, 2011 4:55 PM

Mass Upload doesn't work

Hi everybody,
i am trying to upload user photos via mass upload iview. Therefore i create a folder (c:\photos). In this folder i have two files
a) mapping.properties.txt with the line: Anton=1011
b) 1011.jpg
I use the iView for Massupload from content provided by sap -> collaboration -> demo role -> iviews. I create a task with the following properties:
Task name:           Mappupload
Upload from Folder:           c:\photos
Photo type:           NORMAL
Apply checked conditions:      (no checked)
Use Mapping:           (checked)
After starting the task the photo was not updated and there was nothing in the application log!?
What could be the problem? I can add the file manually but not through mass upload.
Has anybody use a mass upload?
regards,
Seed
Edited by: seed_mopo on Sep 26, 2008 11:04 AM

Hii
Pls Use these threads:
https://www.sdn.sap.com/irj/sdn/thread?messageID=48369#48369
https://forums.sdn.sap.com/click.jspa?searchID=16795891&messageID=4282098
https://forums.sdn.sap.com/thread.jspa?messageID=9087#9087
https://www.sdn.sap.com/irj/sdn/thread?threadID=257887
Thanks:
Hope it would be helpfull

Mass Upload of condition records in APO system.

Hi All,
I wanted to mass upload condition records in to the APO system for the transaction /N/SAPCND/AO11 from an external file.
Is there any FM available?
If FM is not available...which one is the best way to do this?
LSMW?? or BDC???
Please guide me..
Thanks,
Babu Kilari

At least the key fields of the conditiontable
(here 800) must be filled in structure ls_komg.
ls_komg-vbeln = '1234567890'. " document number
ls_komg-posnr = '000010'.      " item number
clear wt_komv.
ls_komv-kappl = 'V '.        " Application V = Sales
ls_komv-kschl = lc_kschl.    " Condition type
ls_komv-waers = 'EUR'.       " Currency
ls_komv-kmein = 'ST'.        " Unit of measurement
ls_komv-kpein = '1'.
ls_komv-krech = 'M'.         " calculation type;
                              "M = Quantity - monthy price
ls_komv-kbetr = '1234.56'.   " new condition value
append ls_komv to lt_komv.
call function 'RV_CONDITION_COPY'
exporting
    application              = 'V'
    condition_table          = '800'      " cond. table
    condition_type           = lc_kschl   " cond. type
    date_from                = '20061101' " valid on
    date_to                  = '20061130' " valid to
    enqueue                  = 'X'        " lock entry
    i_komk                   = ls_komk
    i_komp                   = ls_komp
    key_fields               = ls_komg    " key fields
    maintain_mode            = 'A'        " A= create
                                          " B= change,
                                          " C= display
                                          " D= create
with reference
    no_authority_check       = 'X'
    keep_old_records         = 'X'
    overlap_confirmed        = 'X'
    no_db_update             = space
importing
    e_komk                   = ls_komk
    e_komp                   = ls_komp
    new_record               = lv_new_record
tables
    copy_records             = lt_komv
exceptions

Mass Upload of Define Mode Combinations_PPDS to SNP PPM

Similar Messages

Maybe you are looking for