Massive Reduction in Broadband Speed
Hi,
I am having woes with my BT Broadband Connection and am having absolutely zero joy in plotting a path through the indian call centre scripted process.
It all began about 7 days ago when both my telephone stopped working and my broadband speed collapsed to about 100kbps DL
I actually didnt notice the landline issue (I barely use it) so I reported the fault as a broadband speed issue.
To be fair to BT they diagnosed the broader issue and raised a fault on the PSTN line which an engineer came out to look at and got my telephone working again by recapping the cable on the last hop on the street just outside my house.
This however has left me with broadband that is still incredibly unusably slow. Looking at the information I have available to me it seems to be due in my eyes due to an ongoing low SNR on a degraded line that has been made good enough for a phone call but not to provide a decent broadband connection speed.
I have captured some stats from the HH2 for those interested
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 30.6 dB / 5.8 dB
Line attenuation (Down/Up) 39.5 dB / 20.9 dB
Output power (Down/Up) 20.5 dBm / 12.4 dBm
Download speedachieved during the test was - 211 Kbps
For your connection, the acceptable range of speedsis 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :572 Kbps(DOWN-STREAM), 852 Kbps(UP-STREAM)
IP Profile for your line is - 350 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 1.35:11.5:87.48 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes
xDSL linestate up (ITU-T G.992.5; downstream: 575 kbit/s, upstream: 854 kbit/s; output Power Down: 20.6 dBm, Up: 12.4 dBm; line Attenuation Down: 39.5 dB, Up: 20.9 dB; snr Margin Down: 5.0 dB, Up: 29.5 dB)
The call centre seem to be telling me they think the problem is one dealt with by BT wholesale and that they as my ISP cannot help me. As far as I can tell from the BT wholesale website however they dont deal with the general public. What do I need to say to these people to get a BT wholesale engineer to come and fix the line ?
They have already done something called an extended diagnosis ? However the call centre guy said he couldnt see the results of it on his system.
It is all getting rather frustrating as each time I ring I have to spend a good 30 mins running through the standard call centre checks including replacing microfilters, unscrewing faceplate on wall connection to connect to "test socket" etc. which seems pretty pointless at this stage.
welcome to the forum
have you always been on 21CN up to 20mb or did you receive an email recently from BT advising about exchange upgrade?
From the brief stats you have posted I think all the problems with your line has caused numerous disconnections/resets which the exchange has seen as a bad noise problem and you are currently in a banded profile until your line stabilises.
Normally this last 3/5 days and if there are no further resets/disconnections and you stay connected 24/7 then your speed your speed should return to normal.
please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1)
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
Sudden reduction in broadband speed.
I have been with BT for years and have been recieving a connection speed of approximately 3mbps. However recently the connection has dramatically reduced to just 0.1 mbps. I have already tested the line through the test socket and checked that there isn't any faults with local exchanges etc, the problem still exists. Does anyone know what the problem may be and if there is a fix for it?
Connection information
Line state Connected Connection time 0 days, 0:06:09 Downstream 5,952 Kbps Upstream 448 Kbps ADSL settings VPI/VCI 0/38 Type PPPoA Modulation ITU-T G.992.1 Latency type Interleaved Noise margin (Down/Up) 8.0 dB / 18.0 dB Line attenuation (Down/Up) 46.0 dB / 27.5 dB Output power (Down/Up) 19.8 dBm / 11.8 dBm Loss of Framing (Local) 46 Loss of Signal (Local) 16 Loss of Power (Local) 0 FEC Errors (Down/Up) 9255 / 0 CRC Errors (Down/Up) 0 / N/A HEC Errors (Down/Up) N/A / 0 Error Seconds (Local) 7417
Download speedachieved during the test was - 0.11 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :5.95 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps -
From the old forum.... Slow broadband speeds in th...
FROM THE OLD FORUM Original post by John Jorgensen...
Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 9:17 AM
Click to report abuse... Click to reply to this thread Reply
Hi,
I have had bt broadband opt3 for almost 3 months now and have always had a healthy 9mb+ connection, however have noticed it being very slow in the evening when I come home from work, I checked the speed last nite as iplayer was constantly freezing and was getting 1mb . A bit upset by this as I got bt broadband to play my ps3 online and to get faster speeds on my laptop, and I use these services mostly at nite.
I checked my speed this morning and was getting 11mb, is this normal or am I being capped I cant believe Id be going over my download limit. Can someone from bt get back to me on this?
Thanks
John
alison griffiths
Posts: 54
Registered: 11/3/09
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 11:22 AM in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse... Click to reply to this thread Reply
Welcome to the world of BT , the tv advert when he says " business slow" when trying to load a webpage is not other companies thats BT.
John Jorgensen
Posts: 2
Registered: 9/2/09
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 12:11 PM in response to: alison griffiths in response to: alison griffiths
Click to report abuse... Click to reply to this thread Reply
Yes Alison, I think I can see that now. I wouldnt mind if broadband was a bit slower at peak times, I know thats normal, but when I'm only getting 1mb when my max is 14mb, I just dont feel I'm getting what I pay for. And when it gets to the point where I cant watch iplayer without it stuttering everywhere and online games lagging on the ps3, this is certainly not what I'm paying for.
I was hoping one of the mods here would help me and check my line and see if there is any cap on the line and get it removed.
I really dont wanna phone India, I deal with them 5 days a week as is...
Think I will just send one of the mods an email to check my line and see if it is being capped or if somethings wrong.
anthony dickerson
Posts: 72
Registered: 4/26/07
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 3:52 PM in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse... Click to reply to this thread Reply
You will never get decent speeds on Iplayer,
BT limit it because they want you to subscribe to their precious BT Vision service.
The only way you are guaranteed to get decent speeds on BT is to subscibe to BT Vision and also unlimited broadband.
Then you will get priority when you stream TV at your exchange unlike fighting it out with all the other broadband users as you currently are for the available bandwith.the more over subscribed your local exchange the worse it is
Paddy B Mod
Posts: 199
Registered: 10/13/08
Slow broadband speeds in the evening all of a sudden
Posted: Jan 23, 2010 2:04 PM in response to: anthony dickerson in response to: anthony dickerson
Click to report abuse... Click to reply to this thread Reply
Hi John,
I can take a look at the network side of things for you, to see if there is anything I can do to help improve your speed during peak periods. Please could you drop me an email with your BT account details? Please also include a link to this thread. It would also be very helpful if you could run a few speed tests using www.speedtester.bt.com when you feel your Broadband is running slow. I can then check those results from here.
Thanks
Paddy
BT Forum Moderator - [email protected] - if you're emailing please include a link to your thread so I can reference back to it.
Mateusz Sokolin...
Posts: 2
Registered: 10/11/08
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 7:33 PM in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse... Click to reply to this thread Reply
Well John i'll tell you what it is...
First of all welcome to BT and I hope you'll enjoy 18months of pain and suffer.
OK here it goes....
If you look at your contract, find a rule that says Fair Usage Policy.
Basically it states that BT will cap anyone that is abusing their lines.
However, it does not say what are the limits after which you are going to be capped for how long and at what times. (I'll come back to this later and explain)
If you ring 08007076044 I'm sure that someone will confirm my theory. As constant 1MBit between 6PM till 11/12 PM is actually FUP applied on to your account.
Ok time to explain my frustration about FUP.
Since I signed my contract with "lovely" BT for constant 4 months I had similar issue but it took me even longer to find out what is going on and how to deal with this problem (thanks to google).
FUP team states that if you exceed 100GB in a month (everyone will admit that these days 100GB is nothing when a single game for PS3/XBox360/PC sometimes is more than 5GB and 1080p film is about 12GB) will cap you for a month at peak times to outstanding and superfast 1Mbit (about 130-150KB/s).
I'be been watching my download and for few months never exceeded that 100GB in a month. Been ringing FUP team to verify when suddenly they told me that from (cant remember exactly) March FUP will apply only to accounts that are using Torrents and other P2P.
you won't believe how happy I was hearing that.... So i've started to download and next month guess what.... 1Mbit connection.
Really mad rang FUP team and asked them what on earth is going on. They confirmed that its only P2P and I've explained them that I only use Youtube, BBC iPlayer, Rapidshare, Steam and XBox Live, Beatport (just don't understand how ppl can use torrents and other P2P as they are just way to slow). So they were happy to take the cap off my broadband connection.
Next month same issue solved exactly the same way.
After that for consecutive few months I had no problem whatsoever until September where FUP Team said that there is no such thing and FUP applies to everyone.
So just want to say that BT is rubbish that can't keep their word.
I went to one of the sales advisor in the shopping centre and asked him how FUP works as it does not say in the contract "how, when, who and what".
So he said that policy is applied based on amount of files downloaded within that 100GB. So if I download e.g. 3x 50GB (although its 150GB altogether) files I wont be affected but 100x 1GB will put a cap on me.
I've been so curious if what he said was right and started to download 2x 60GB and guess what... Got frigging FUP placed on my account!!!.
I've got 2months left with them and will be extremely happy to cancel my contract, moreover, I will do everything in my power to sue them under EU Consumer Rights Law (that states that contract should be clear and fair to both sides) as Fair Usage Policy is one of those things that allows BT to do anything they want to their customers;
1. No clear explanation of what FUP is.
2. Does not states the amount of downloaded data required to have cap on the acount
3. Does not states for how long it will be applied
4. Does not states when it will be applied
If you look at e.g. Virgin Broadband everything is clearly written in nice and understandable way. It warns you at what times FUP will be applied under what circumstances and for how long. Isn't it what we all want to know??
Alex Owen
Posts: 3
Registered: 12/13/09
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 9:35 PM in response to: Mateusz Sokolin... in response to: Mateusz Sokolin...
Click to report abuse... Click to reply to this thread Reply
@Mateusz I think I maybe a victim of this outragous stint BT have done. I have 2 XBOX 360's running on XBOX Live, 2 Desktop PCs connected to the web constantly, and 3 laptops, we have a torrent sharing running and World Of Warcraft on one of the PCs. All of this is shared across a 6 person family. How can a family where two members goto to college and university do their college ork, download application such as VB.net do their coursework and revise without the hassle of a **** connection. Seriously BT get your ******* head outta your **** and stop this ********, we are customers, we pay for what we are offered. When I signed up several years ago I could download everything on the net woithout infracions on my line being set in motion. You altered my contract without telling me. You will lose custom from this. Also you have ****** my wireless
Edited by: Alex Owen on Jan 24, 2010 9:36 PM
amanda jones
Posts: 33
Registered: 1/8/10
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:42 PM in response to: Alex Owen in response to: Alex Owen
Click to report abuse... Click to reply to this thread Reply
You lot are lucky, We wish we could be capped to 1mbit. Our IP profile is capped to 500kbit because BT say the line isn't good enough for anything more. We are paying for option3 up to 8mbit and BT have said we must continue to pay for it for the remainder of the contract, or buy ourselves out of it early, the reason they give.... Up to 8mbit means up to 8mbit. If you dont get 8mbit then TOUGH LUCK SUCKERS!!
The outcome? We feel like we've been turned over by a dodgey second hand car salesman called BT. The internet deal he flogged us was a dog, a ringer, it wasn't cosher and certainly had a false MOT certificate.
Computer Geek
Posts: 429
Registered: 7/22/05
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:49 PM in response to: amanda jones in response to: amanda jones
Click to report abuse... Click to reply to this thread Reply
Hi Amanda,
Why have you joined BT Option 3 when you can not get what BT can offer?
No pun intended but you are a bit of a sucker for paying high prices where other suppliers are cheaper and can provide what your line can support.
CG
amanda jones
Posts: 33
Registered: 1/8/10
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 26, 2010 9:13 PM in response to: Computer Geek in response to: Computer Geek
Click to report abuse... Click to reply to this thread Reply
we moved house last october to this one, the connection was rubbish from the get-go, BT said the router was broken and we needed a new one, we said OK. That "OK" meant that we had entered into a new contract for option 3 same as out old one. The router wasn't broken, the new one didnt fix or improve the problem, we have since asked for a price reduction or compensation and been told "no". we are in contract and can pay to buy ourselves out of it if we like but otherwise we have to pay for option 3 and recieve fixed rate 500kb.
Clare Thurston
Posts: 4
Registered: 10/17/06
Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 27, 2010 11:57 AM in response to: amanda jones in response to: amanda jones
Click to report abuse... Click to reply to this thread Reply
Hi Amanda,
I think you'll find that the Hold To Term rules have changed. BT are now unable to charge you for the account if you no longer require it. It is against OFCOM's rulings for a company to make more money out of you as a leaving customer than an existing one. However, You will need to pay for the connection charge (if that has not expired it's original differed contract) which is £40. A cancellation fee of £25 if you are simply cancelling and not migrating using a MAC key and for any hardware. The Routers are advertised at £88 and i would suggest that if they believed on to be faulty then that would be replaced under guarantee and not be put on a differed basis. I would check exactly what they say the are charging you and query this through OFCOM. http://www.ofcom.org.uk/Months of impecable service form BT as an option 3 customer. (I've even recommended BT to people)
but
For the past 2 weeks peak traffic has murdered my connection.
I can get 14mbit off peak, and it used to drop to about 7-9 at peak times.
Now its down to 1-2mbit at peak times. (no i haven't breached FUP as I check my btinternet inbox for the 80GB warning)
I think its resonable to experience drop off but 90%!!!
BT advertising says fast speeds at peak times. less than 2mbit is not fast. (that the governments minimum standard!!!)
I don't know how to procede because when I'm experiencing these issues if I ring up I will end up waiting so long to speak to someone (because its peak time) the concection wiill be better again.
I can think of no recourse other than to approach trading standards...
Guarnetee me 5mbit at peak times (enough to stream HD iplayer) and I'd be happy
That is what BT vision customers are in essence are getting + what ever their PC is using.
Fair usage? what about Fair Supply. -
Hi all,
I suffered a massive drop in Internet connection speed earlier this week which has so far not improved.
Although I have had ADSL since it's near earliest days and being close to my exchange I have never received a great performance but have become more or less satisfied with the 4\4.5mbps I receive from my Total Broadband Option3 package.
I did receive close to that speed prior to the 8mb upgrade a few years back and an upgrade to 20mbps doesn't promise me any better (availability checker for neighbours etc suggests that faster is available but who is to know?).
On Wednesday (9th February) my connection\synch speed dropped to about half it's usual speed and is now in the region of 240kb rather than the near 500kb I usually receive. I would like to comment that I know my line can achieve better than this as I got download speeds of nearer 600kb for a month or so around October last year.
I power-cycled the router and after the diagnostics had completed etc and the line synch process had completed the speed of the line had dropped again slightly.
Not to sound arrogant but I know all the usual troubleshooting having been through it all before on several occasions each time finding out the issue is with the exchange and so having had no means to affect the problem.
The situation is the same this time in that categorically nothing has changed inside my home nor with my equipment and so I am confident that the problem is external to me, especially considering the massive drop in speed.
I did get a response from a BT forum moderator from a post I placed on another site but the advise I got back was generic at best and didn't suggest anything besides mounting a BT iPlate. that advice was no good for two reasons which are that as nothing in my home has changed fitting an iPlate won't make a 2+mbps connection increase (back to what it was) and that I already have an 'ADSL v1.0' labelled master socket that already contains all the tech that the iPlate does. Having replied to their email stating that I already have the afore mentioned v1.0 master socket I haven't had any response.
So... to explain further...
here are some diagnostic stats for the past couple of days taken from my router (Draytek Vigor 2820n) - sorry the font is small bu tI wanted to keep the layout of the text when I completed the post;
> ADSL status @ 04:43 10/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2528000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2592000 bps US Attainable Rate : 1100000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 15 dB
DS actual PSD : 18. 6 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 09:33 12/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2976000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 3328000 bps US Attainable Rate : 1104000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 16 dB
DS actual PSD : 19. 3 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 04:07 13/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2880000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2912000 bps US Attainable Rate : 1100000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 15 dB
DS actual PSD : 18. 7 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
The BT Speed Tester web-site reports my line speed as 2mbps when it was previously 4.5mbps and so as to check actual download speed independently I ran a comparison speed test via SpeedTest.Net which reported much the same result (down\up speed relative to what you would expect for a 2mbps line - Link to SpeedTest.Net results: http://www.speedtest.net/result/711802566.png ).
As you can see from the diagnostic data, the SNR is high and so it does seem to suggest that there is fault on the line. prior to the fault, the SNR was around 6db rather than the 15\16db reported now.
I know it has little factual baring on this incident's potential problems but my last broadband speed issue was caused by water having gotten into the top of the telephone pole at the end of my street which was temporarily fixed by a BT engineer but I don't know whether that was ever permanently fixed?
During that occasion I did suffer very slight noise on my telephone line which I must say isn't the case this time but I thought I would request a line test once again in any case. That unfortunately hasn't helped as the online system tells me 'telephone number not found' and so I can't proceed with the test.
Can anyone offer any advice or is any BT person willing to take on the issue and see it to resolution for me please?
Even trying my own diagnostics trying to speed things along by obtaining a line test hasn't been possible.
I do appreciate that there is a support system in place but that has failed me on this occasion and so I have no faith in going throught the telephone support for BT Broadband when I know that nothing I can affect is at fault.
I can of course provide my account details, email address etc. to anyone BT techie that can assist and I am happy to run any further diagnostics that might me appropriate under the circumstances.
Thanks in advance for any advice and\or furtherance anyone can make towards resolving my issue.
Regards,
Dizzy
PS> if my speed increases beyond 4.5mbps I won't be upset!5 days into the problem and nothing much has improved. My line speed has now sync'ed into the realms of 2.5mbps so I am at least seeing circa 300kb download speeds (but that's still at least 50% less that I had).
At the end of this post are the latest batch of diag results for anyone who wants to check them over. The only details that seem to change are the 'Cur SNR Margin' and as a result he downstream actual\attainable rate(s).
It just simply seems that something has screwed-up the line and now I'm going throught the tedious increase period to get back to where I was. As increases always take longer that decreases it could be some time before things get back to normal (if they are on a slow increase that it!).
The Kitz Site has some good information related to BRAS profile increases\decreases and depending on how small the increases (if any) are coming my way it could take a very long time to get back to 4.5mbps or thereabouts.
At current rates if increases continue it could be at least 15 days (at 1/2 mbps per 5 days) making it some 20 days total to get back to where I was. All because of a fault that lasted a a fraction of a second.
It is worth mentioning that I did have a similar long period to wait for my line sync speed to increase as a result of the water having gotten into the top of the telephone pole some time ago, which I mentioned in an earlier post, but at that time the drop wasn't too big and so a few days saw the previous performance restored.
For the benefit of others that may read this post, I've explained in my email message to Stephanie that, I have checked with neighbours for any changes they may have made electrically, which they say they haven't, and confirmed that my modem is connected directly to the master socket, and that the master socket is an NTE5 socket so I don't need an iPlate.
I also mentioned that I have ferrite RF chokes on the extension lines and the router<->ADSL line (supplied with the router itself) to cut RF interference that may be picked up by the system.
On a related note, it was commented in another thread that RF chokes can cause problems with ADSL comms but that is not true (I've done a heap of research on the subject). That being said, they can actually have no effect at all if not installed correctly which is why the snap-on-cable type is best because you simply can't get it wrong.
Anyhow, here are the stats and I hope things continue to improve, even if it does take 20 days!
> adsl status @ 12:44 13/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2880000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2912000 bps US Attainable Rate : 1100000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 16 dB
DS actual PSD : 18. 7 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 17:56 13/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2944000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2976000 bps US Attainable Rate : 1108000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 15 dB
DS actual PSD : 18. 9 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 04:30 14/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2944000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2976000 bps US Attainable Rate : 1108000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 12 dB
DS actual PSD : 18. 9 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 21:29 14/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2944000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2976000 bps US Attainable Rate : 1108000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 14 dB
DS actual PSD : 18. 9 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 03:19 15/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 2944000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 2976000 bps US Attainable Rate : 1108000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 12 dB
DS actual PSD : 18. 9 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
> adsl status @ 11:03 15/02/2010
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 3008000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 3040000 bps US Attainable Rate : 1100000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 8
NE Current Attenuation : 45 dB Cur SNR Margin : 15 dB
DS actual PSD : 19. 1 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 19 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA > -
Stuck at 2mbps broadband speed
Hello
I think I have the same problem as Godfrey123 as for several weeks I have had a very poor broadband speed of less than 1.9mb from around 7.5mb which it had been for many years since I first joined BT broaband. I have tried all the usual suggestons and at 1 time the configuration page showed I had been connected for over 8 days but with no difference in speed. It may be a coincidence but the speed reduction seemed to be just after I renewed my BT broadband contract at the end of July
I hope you can help as now difficult to watch BT Sport on line. Results below connected to master socket and all wireless devices switched off.
Regards
Malc
Internet Connection Configuration
Connection Information
Connection time:
4 days, 00:32:50
Data Transmitted/Received:
2.4 GB / 397.8 MB
Broadband username:
[email protected]
Password:
Not configured
TCP/IP settings
Broadband network IP address:
86.131.94.239
Default gateway:
217.47.74.146
Primary DNS:
217.32.171.21
Secondary DNS:
213.120.234.30
FAQ
1. Best Effort Test: -provides background information.
Download Speed
2.06 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 2.06 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
Solved!
Go to Solution.Once the Forum Mods have read your post they will post an invite here once you reply to them they will take personal ownership of the problem until resolved.
Do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help
The forum mods normally reply within 3/5 working days after you have contacted them
They will contact you personally by email or phone
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Broadband speed gone, customer support claimed to ...
Hello,
I have never had any problems with my broadband speeds before whilst being on bt. I can usually get speeds of 3-4mbps, and an upload speed of 0.2-0.3mbps.
About 15 days ago, my download speed just stopped working, and it is now running at a constant 0.1mbps, whilst my upload speed is staying the same. We rang bt the second this happened, and the lady on the line led us on a massive journey around our house, checking that the ADSL filters were all plugged in...since we've never had a problem before and nothing had changed, I thought this a little pointless but I checked anyway and they are all fine.
She then said that it was a problem with our exchange and it's currently being fixed. Should take up to 10 days. 10 long days later and the speeds haven't changed a bit, so we call again. And again we are led about checking filters, and at one point unscrewing a phone socket to check for a box of some sort? Anyhow, this ended up the same as last time, no change in speeds.
Then, we were told there was a problem with our profile, and that he had fixed it and it would be back to its normal speed in 4 hours. 3 days later and it hasn't worked.
When connecting to my router, the ADSL claims it has a downstream of around 4000kbps, and that's what I should be getting, but I'm not. I've tried connecting to the router via ethernet and it made no difference. I've also moved it onto different sockets using different filters.
Thanks for any suggestions,
Eddyyour profile is probably low due to either the router resetting on it's own or you trying to reset in the hope it will sort itself or both
in order to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1)
are you connected directly to the NTE5 master or test socket or to somewhere else? from whay you said you do have extension sockets in other rooms in your home
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Broadband Speed Keeps Getting Capped
Over the last two months I have found that my broadband speed has been capped at my local BT Exchange at around the 0.1MG mark. An engineer has visited and confirmed that all of my equipment is working correctly. But I have subsequently been advised that this problem is because I don't leave my BT Home Hub switched on 24/7.
I'm afraid that I'm very uncomfortable with leaving equipment of any sort switched on when it's not in use. And I can't see anything in the BT literature which indicates that not having the hub switched on constantly would result in the speed being capped.
This problem has only recently manifested itself - and if my not having the BT Home Hub switched on all the time then this problem would surely have occured sooner, and would also happen everytime I switched the hub off.
Can anyone please offer a solution?Thank-you for your reply.
On Saturday (18.08.2012) my equipment (hub and computer) were switched on at around 08:00 - everything was fine all through the day. At about 19:00 I switched off my computer, but I left the hub switched on. At around 19:30 I noticed that my broadband speed had dropped as my television was unable to connect to YouTube. Only when I switching my computer back on to do a speed check did I discover that my speed had once again been capped. This isn't just a 'reduction in speed', instead my speed is being capped - with no chance of my getting it stabilised / restored without the intervention of a call to BT and for an engineer to reset it at The Exchange.
I know countless people who have broadband and who don't leave their equipment switched on around the clock - they, like me, switch their equipment on only when it's required - and they have no problems whatsoever. -
Broadband speed dropped from 10Mb to 250K overnigh...
My broadband speeds have dropped massively overnight and I was wondering if any of the experts on here can give me some guidance on what to try or to do next?
I've been on BT Total Broadband for ages and it was running typically at about 10Mbps according to occasional checks on Speedtest.net since early May when my line was upgraded - previous had been at about 6Mb. However, today I noticed my internet access was sluggish, I tried Speedtest.net again and was shocked to find I was being quoted a download speed of 0.24Mb (upload strangely was higher at 0.38). I then tried Speedtester.bt.com and it says my IP profile is 250Kbps with an actual speed of 159Kbps, so this makes it sound like I'm being throttled down, yet I haven't even come close to any limits. Also it's a bit strange to have it happen so suddenly - everything was working fine last night and the router has been on 24/7 (although I did reset it this morning thinking that maybe this would solve the speed issue - no such luck!)
I'll post the stats from the Speedtest and from my router below (I use a Belkin, not the Homehub in case that makes a difference), but would appreciate some ideas about what might have happened and anything I can do.
---------- Speedtester.bt.com -----------
Download speed achieved during the test was - 159 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :1496 Kbps(DOWN-STREAM), 536 Kbps(UP-STREAM)
IP Profile for your line is - 250 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 19.52:25.06:55.42 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
----------- Router Stats ------------
ADSL
Type Fast Path
Status SHOWTIME
Downstream Upstream
Data rate(Kbps) 1496Kb 536Kb
Noise Margin 26 25
Output power(dBm) 99 196
Attenuation(dB) 38 16Hi there I'm also having the same problem unfortunately. A coupe of days ago I was transferring a file from my laptop to my desktop via wireless and it caused my home hub 2 to hang. I had to reboot it a couple of times to get it working again but once it was back up again I found browsing to be really slow. I went on speedtest.net and discovered that I was getting 250k down and about 300k up. I power cycled the home hub a few times and checked all of my microfilters and connections (just to be on the safe side) but it was still slow. I went on the btspeedtest site and it is showing that my ip profile is 250k even though I am connected at 4,500k. I called the bt helpdesk this evening and was told that there looks like there was a problem but that they are showing my ip profile as being 3000k now and that I should check in a few hours on the bt speedtest site again. Well I did and it's still showing as 250k. The details from my hub and the speedtest site are below. Any thoughts and help would be very greatly appreciated.
Best effort test download speed = 219 kbps
Your DSL connection rate is 4576 kbps (down stream), 448 kbps (up stream)
IP Profile for your line is 250 kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
6.3 dB / 21.0 dB
Line attenuation (Down/Up)
49.0 dB / 31.0 dB
Output power (Down/Up)
18.9 dBm / 11.9 dBm
Connection Information
Line state
Connected
Connection time
0 days, 1:51:21
Downstream
4,576 Kbps
Upstream
448 Kbps -
Broadband Speed Decreases Once Again
I am getting so frustrated with BT who just do not seem interested in assisting with what is becoming a persistent problem. I would appreciate any advice as to what to do next? The fact that customers can’t speak to a BT Broadband Customer Service advisor on a Sunday via the telephone because they are closed is not helpful.
I was with O2 for 3 years, enjoyed consistent (but not great) download speeds of 2500Kbps. I swapped to BT a couple of months back and since have had problems with regular broadband speed reductions. When I changed to BT I was told that I should expect between 3.0Mb and 5.0Mb - Estimated speed: 4.0Mb (from BT website using
the landline number). I have never received 3 .0Mb.
Yesterday I was receiving download speeds of 2800Kbps. However, I get up this morning and my speed had reduced to 128kbps. This has happened on previous occasions. The last time the Customer Services Advisor referred the problem to engineers to reset the connection at the exchange. This was done and the speed went back up.
This morning when I noticed the slow speeds I tried a quiet line test which did not reveal a problem. I tried resetting the router and used BT speed tester to find that suddenly my line is shown as having an acceptable range of speeds
of 50 - 500 Kbps? How can this occur overnight and the line become ten times slower and this be shown as acceptable when the BT number postcode checker states that I should except to receive 4.0Mb?
I have posted router stats and speed test results and any ideas on how to progress this issue will be gratefully received?
Thanks
Nick
BT Speed Test Results
Download speed during the test was - 314 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :448 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 350 Kbps
Router Stats
08:32:20, 17 Jul.
( 66.760000) Time
synchronized with server 213.123.20.170
08:32:20, 17 Jul.
( 66.680000) Requesting
time from server 213.123.20.170
08:32:16, 17 Jul.
3 consecutive beacons
have not been transmitted
08:32:16, 17 Jul.
( 62.460000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
08:32:12, 17 Jul.
( 58.620000) WAN
operating mode is DSL
08:32:12, 17 Jul.
( 58.620000) Last WAN
operating mode was DSL
08:32:11, 17 Jul.
( 57.280000) PPPoA is
up
08:32:10, 17 Jul.
( 56.720000) CHAP
authentication successful
08:32:10, 17 Jul.
( 56.660000) Starting
CHAP authentication with peer
08:32:07, 17 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 24 Mbps
08:32:07, 17 Jul.
( 53.450000) Lease for
IP 192.168.1.78 renewed by host Nicks-Laptop (MAC 00:22:5f:43:45:02). Lease
duration: 1440 min
08:32:07, 17 Jul.
( 53.430000) Lease
requested
08:32:05, 17 Jul.
( 51.470000) DSL is
up
08:32:03, 17 Jul.
( 49.410000) DSL noise
margin: 21.00 dB upstream, 15.00 dB downstream
08:32:03, 17 Jul.
( 49.340000) DSL line
rate: 448 Kbps upstream, 448 Kbps downstream
08:31:46, 17 Jul.
( 31.980000) Auto
channel selection (reason 'Power up') is complete. Selected channel: 6, noise
data: 1-(-117) 2-(-117) 3-(-118) 4-(-117) 5-(-117) 6-(-118) 7-(-118) 8-(-118)
9-(-118) 10-(-115) 11-(-115) 12-(-116) 13-(-115).
08:31:44, 17 Jul.
( 30.380000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
08:31:44, 17 Jul.
( 30.090000)
Initializing transaction for event code 1 BOOT
08:31:30, 17 Jul.
( 16.250000) Booting
firmware 4.7.5.1.83.8.57.1.3 (Type A)
07:30:58, 17 Jul.
(527520.680000) DSL is
down after 484 minutes uptime
07:30:56, 17 Jul.
(527519.360000) PPPoA
is down after 484 minutes uptime
07:29:10, 17 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 54 Mbps
07:26:46, 17 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 24 Mbps
07:26:46, 17 Jul.
(527268.960000) Lease
for IP 192.168.1.78 renewed by host Nicks-Laptop (MAC 00:22:5f:43:45:02). Lease
duration: 1440 min
07:26:46, 17 Jul.
(527268.950000) Lease
requested
04:59:22, 17 Jul.
(518425.210000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
04:59:21, 17 Jul.
(518424.390000)
Initializing transaction for event code 2 PERIODIC
23:30:17, 16 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 54 Mbps
23:28:34, 16 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 24 Mbps
23:28:33, 16 Jul.
(498576.280000) Lease
for IP 192.168.1.78 renewed by host Nicks-Laptop (MAC 00:22:5f:43:45:02). Lease
duration: 1440 min
23:28:33, 16 Jul.
(498576.270000) Lease
requested
23:26:23, 16 Jul.
(498446.060000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
23:26:20, 16 Jul.
(498442.550000) WAN
operating mode is DSL
23:26:20, 16 Jul.
(498442.550000) Last
WAN operating mode was DSL
23:26:18, 16 Jul.
(498441.170000) PPPoA
is up
23:26:18, 16 Jul.
(498440.670000) CHAP
authentication successful
23:26:18, 16 Jul.
(498440.600000)
Starting CHAP authentication with peer
23:26:13, 16 Jul.
(498435.560000) DSL is
up
23:26:10, 16 Jul.
(498433.450000) DSL
noise margin: 21.00 dB upstream, 16.90 dB downstream
23:26:10, 16 Jul.
(498433.380000) DSL
line rate: 448 Kbps upstream, 192 Kbps downstream
23:25:57, 16 Jul.
(498419.560000) New GUI
session from IP 192.168.1.78
23:25:41, 16 Jul.
(498403.700000) DSL is
down after 3 minutes uptime
23:25:39, 16 Jul.
(498402.370000) PPPoA
is down after 2 minutes uptime
23:23:58, 16 Jul.
(498300.740000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
23:23:01, 16 Jul.
Host 00:22:5f:43:45:02
connected to SSID 'BTHub3-7GGN' at 36 Mbps
23:22:51, 16 Jul.
3 consecutive beacons
have not been transmitted
23:22:51, 16 Jul.
(498234.000000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
23:22:47, 16 Jul.
(498230.510000) WAN
operating mode is DSL
23:22:47, 16 Jul.
(498230.500000) Last
WAN operating mode was DSL
23:22:46, 16 Jul.
(498229.140000) PPPoA
is up
23:22:46, 16 Jul.
(498228.650000) CHAP
authentication successful
23:22:46, 16 Jul.
(498228.580000)
Starting CHAP authentication with peer
23:22:41, 16 Jul.
(498223.550000) DSL is
up
23:22:38, 16 Jul.
(498221.450000) DSL
noise margin: 21.00 dB upstream, 15.30 dB downstream
23:22:38, 16 Jul.
(498221.380000) DSL
line rate: 448 Kbps upstream, 896 Kbps downstream
23:22:37, 16 Jul.
(498219.790000) New GUI
session from IP 192.168.1.78
23:22:36, 16 Jul.
(498219.460000) New GUI
session from IP 192.168.1.78
23:22:25, 16 Jul.
(498208.350000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
23:21:54, 16 Jul.
(498176.630000) Server
URL: https://pbthdm.bt.motive.com; Connecting as user: ACS
username
23:21:47, 16 Jul.
(498169.630000) DSL is
down after 8299 minutes uptime
23:21:45, 16 Jul.
(498168.310000) PPPoA
is down after 8299 minutes uptimeHiya
At least we are not the only ones we noticed a drop in connection speeds last Monday night rang BT technical they line tested it and connection went from 0.5mb to an average of 5.5mb whoopee.
But earier this month we recieved an E mail from Warren Buckley(marketing division) saying an upgrade would be taking place on 14th July 2011 and that we might loose service for 10 minutes fair do's.
Work should be completed by 6:00pm at 7:00pm I logged on to E mail and found it very slow tried a speed test and found it down to 0.5 mb.
Rang Broadband help line went through the usual rubbish with them and was told that the work had been completed but we would not have full speed yet as it takes a while to settle down.
This upgrade was supposed to increase speed up to around 12mb and be more efficient.
Now when I go to a shop and buy a New Kettle I dont expect to be told that for the first few days it will take longer to boil till it has settled down,it either works or it does not.
I got home from work on the 15thJuly and found connection speeds of 0.3mb wow some upgrade in the mean time I had dropped Ian Livingson an E mail who normally does not answer his E mails but actually got a response in the end it was passed on to the Technical people at Newcastle who are suppoded to be dealing with the problem but wont be holding my breath on that one either.
If you dont know Ian Livingiston is the main man for BT group the one where the buck stops here LOL
So if you get an up-grade be aware its a joke and we are stupid enough to believe it.
So if you want connection speed slower than old dial up modem service stick with BT
Anybody else been down this road ?
Victor Meldrew12 -
New contract, new hub, same broadband speed.
Went online to look at my broadband options - it suggested I could get 12-17MB/s on a new contract.
So I rang and got a new contract. The new hub arrived, works great.
Now, when I go online to bt.com and run the speed estimator, it suggests I could get only 12MB/s. OK this is right at the bottom end of the initial range, but fair enough.
However, the actual BT broadband speed test says I'm only getting 7.9MB/s - exactly the same as I got before the new contract.
So, my question is, should I actually expect a greater speed? Is BT providing a newer, upgraded form of VDSL? I mean, is there some technical reason why I could expect a greater speed?
(edit) OK I've done a bit of self-help... see some results below. Doesn't help me but maybe somebody can make use of this information. And yes of course I tried the speed test again and it didn't make any difference.you are on broadband with fibre vdsl which is the same as infinity but because your speed estimate was <15mb BT do not sell infinity where speed is <15Mb but you get broadband with fibre instead. this is still fibre to the cabinet and copper from cabinet to your home - just the same as infinity.
this is the second post recently where the estimate was the checker 'A' speeds but the reality is your line is not good enough for 'A' so you have somewhere between 'A' and the 'B' speed
the diagnostic test normally does work but sometimes you need to try a few times
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Broadband Speed dropped and wont come back
Hi, I need help and advice please.
Background info first though, so please bare with me.
During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
Great not drastic but should give me 250kbs to 50kbs extra.
The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
NOW TO THE ISSUE.
My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
And here is my BT speedtester data:
1. Best Effort Test: -provides background information.
Download Speed
1.38 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 1.38 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.5 Mbps
My home Hub data:
Line state:
Connected
Connection time:
0 day, 17:16:04
Downstream:
2,208 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.3 dB / 15.0 dB
Line attenuation (Down/Up):
56.5 dB / 31.5 dB
Output power (Down/Up):
18.1 dBm / 11.9 dBm
FEC Events (Down/Up):
12650 / 48
CRC Events (Down/Up):
50 / 17
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
289 / 10
Error Seconds (Local/Remote):
0 / 0
Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
Many thanks
Jon
Solved!
Go to Solution.Hi JONNYYOUNG,
I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
Your story sounds very simialr to my experiende last November, speeds and line length being very similar. An engineer said there was noise on my line so he switched me to another pair. Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps.
Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
Good luck,
dfenceman
Best regards,
dfenceman -
Slow broadband speed and a lack of customer care -...
I am so close to throwing in the towel with BT. The service I receive is both inconsistent and laughable, the customer care is non-existent and the price I pay is more than VirginMedia.
Why do I stay? Why do I persist with an organisation who are just not interested?
Anyway.
My broadband speed veers from 500Kb to 2Mb, but BT Technical insist I am capable of receiving 8-10Mb
The full story of my latest attempt to deal with BT Technical is here: http://brennigjones.com/blog/?p=2776
I am really at the end of my tolerance and tether, but if anyone can help with a last-ditch throw of the dice, please let me know - otherwise I'm off to VirginMedia.
ThanksHello David,
The results of the test are below. What do we do now?
<script type="text/javascript">// paintProgressAndMessageOnBar(-1 ,"One Last Test Required" ); // </script>
This Test comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
1845 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1845 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8032 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7000 Kbps
2. Assured Rate Test: -provides background information.
Download Speed
542 Kbps
0 Kbps
600 Kbps
Max Achievable Speed
Download speedachieved during the test was - 542 Kbps
For your connection, the acceptable range of speeds is 576-600 Kbps.
Additional Information:
Assured Rate IP profile on your line is - 600 Kbps -
Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation. -
I have been trying to update my ipod to the 5.0.1 but after waiting for a hour for the download i get an error message that the server has timed out as my broadband speed is not good, could this be the problem and if so how can i get the update?
I have the same problem I disable msconfig mode all the programs escept windows and apple products but the same error appears at the last second of downloading the update
-
Hi,
I did a speedtest on the 1st and it showed I was getting 16mb DL speed however in the past couple of days I have only been recieving 3-4mb sometimes even slower.
I checked my status through ADSL settings and was wondering if the noise on the line is the problem:
ADSL line status
Connection Information
Line state
Connected
Connection time
2 days, 01:26:37
Downstream
5,479 Kbps
Upstream
763 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Fast
Noise margin (Down/Up)
31.1 dB / 10.3 dB
Line attenuation (Down/Up)
18.9 dB / 7.8 dB
Output power (Down/Up)
35.0 dBm / 1.1 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
7 / 0
HEC Errors (Down/Up)
2 / 0
Error Seconds (Local/Remote)
7 / 0
Thanks.
Tom.HI welcome to the forum
Yes your noise is the problem that has risen because of disconnections
can you please try the quiet line test at the test socket located inside the master socket dial 17070 select option 2 you should hear no noise if you do then you need to phone bt faults on 151 and report a noisy line but do not mention broadband when you call increases in noise margin can also be caused by manually restarting the hub have you been doing that in the hopes of increasing speed if so please stop as restarts of the hub are the worse thing you can do this link may also help the post by RogerB gives lots of suggestions to try as well http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Maybe you are looking for
-
How do I create a digital signature on a TCP or a UDP flow?
I am trying to convert samples of a voice signal, which is intercepted from the microphone, into fixed length digital signature bytes (using Hash, or) and attach these fixed length bytes to a communication session between two terminals (UDP or TCP "H
-
PDF file size limited to graphics memory in Reader?
I've created a form (in LiveCycleDS) that allows for an unlimited number of photos to be loaded into it. I put an image into a subform that is duplicated every time a user clicks a button thus creating an unlimited number of images that can hold phot
-
My old iphone 3g has photos on it. When I try to get the photos off and onto my imac iphoto and image capture only bring up the camera roll. I have more pictures that arent on the camera roll there are albums and a photo library full of pictures that
-
External Debugger From NWDS not working
Hi, I am working on wd java. When i run my application, on particular event action, i am calling rfc. So to debug i kept my external debugger in my se37 (SAP GUI) and ran the application. But debugger is not called but i am getting the output from RF
-
Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN
Hi All, The problem occurred in PC which was running smooth until now Now I am getting message: in BI : Error occurred in the data selection When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN Probably the only way to eliminate the error is to corre