Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Similar Messages

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

Regarding master data loading for different source systems

Hi Friends,
I have an issue regarding master data loading.
we have two source systems one is 4.6c and another is ecc 6.0.
First i am loading the master data from 4.6c to bi7.0.
Now this 4.6c is upgraded to ecc6.0.
*In 4.6c and ecc6.0c master data is changing.
After some time there is no 4.6c, only ecc 6.0 is there.
Now if i load master data from ecc6.0 to bi7.0 what will happen.
Is it possible ?
Could you please tell me?
Regards,
ramnaresh.

Hi ramnaresh porana,
Yes, its possible. You can load data from ECC.
Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
You need to take care of Delta's before and after upgrade.
Hope it Helps
Srini

Master data loading for 0material

HI Friends,
we have transported 0MATERIAL master data from development system to quality, while loading data in quality system i am facing below errror .
"Data record 1 with the key '********' is invalid in value '********' of the attribute/characteristic 0MATERIAL".
Kindly advice
Thanks in advance.

Hi Sandhya Rani Boya Hussainappa
just check the values for attributes and then if its case of spl char s just go 4
option as Ravi Suggested.
Mean while if it not possible then just go to the in fo pak and clcik on error
handling give 1000 in the box and say continue and start the load ..
Regards
R M K
**Winners don't do different things, they do things differently**
> HI Friends,
> we have transported 0MATERIAL master data from
> development system to quality, while loading data in
> quality system i am facing below errror .
>
> "Data record 1 with the key '*********' is invalid in
> value '*********' of the attribute/characteristic
> 0MATERIAL".
>
> Kindly advice
>
> Thanks in advance.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

Data load for SRM

hello all:
I am doing the BW config for an SRM environment.
Activated the data source for the master data / transaction data.
Replicated the datasource to BW
installed the following from Business Content
1. Infoobject
2. Infosource
Assigned the datasource, created the infopackage.
when i run the infopackage for master data load, if fails and give the following error (though only I am working on it, in a single session).
System response
Caller 09 contains an error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
When I do rsa3 to do the extraction checker, I get 770 records for the same.
Pl let me know, what I am doing wrong here?.
thanks

hi Gili,
As per the thread, you provided, I tried reactivating the datasource and it still failed.
I wanted to do the "transfer global settings" - but I do not see that option in the source system context menu - (I am not sure, if it is because of some issue, or because of the reason, that the BW server / SRM server are on the same system/client).
Thanks for any help.

How do we improve master data load performance

Hi Experts,
Could you please tell me how do we identify the master data load performance problem and what can be done to improve the master data load performance .
Thanks in Advance.
Nitya

Hi,
-Alpha conversion is defined at infoobject level for objects with data type CHAR.
A characteristic in SAP NetWeaver BI can use a conversion routine like the conversion routine called ALPHA. A conversion routine converts data that a user enters (in so called external format) to an internal format before it is stored on the data base.
The most important conversion routine - due to its common use - is the ALPHA routine that converts purely numeric user input like '4711' into '004711' (assuming that the characteristic value is 6 characters long). If a value is not purely numeric like '4711A' it is left unchanged.
We have found out that in customers systems there are quite often characteristics using a conversion routine like ALPHA that have values on the data base which are not in internal format, e.g. one might find '4711' instead of '004711' on the data base. It could even happen that there is also a value '04711', or ' 4711' (leading space).
This possibly results in data inconsistencies, also for query selection; i.e. if you select '4711', this is converted into '004711', so '04711' won't be selected.
-The check for referential integrity occurs for transaction data and master data if they are flexibly updated. You determine the valid InfoObject values.
- SID genaration is must for loading transaction data with respect to master data, to cal master data at bex level.
Regards,
rvc

0distr_chan initial master data load, text missing

Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!

Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks!

Master Data load via DTP (Updating attribute section taking long time)

Hi all,
Iam loading to a Z infoobject. Its a master data load for attributes.Surprisingly, i could find that PSA pulls records very fastly( 2 minutes) but the DTP which updates the infoobject takes a lot of time. It runs into hours.
When observed the DTP execution monitor, which shows the breakup of time between extraction,filter,transformation,updation of attributes
i could observe that the last step "updation of attributes for infoobject" is taking lots of time.
The masterdata infoobject has got also two infoobjects compounded.
In transformation ,even they are mapped.
No of parallel processes for the DTP was set to 3 in our system.
Job Class being "C".
Can anyone think of what could be the reason.

Hi,
Check the T code ST22 for any short dump while loading this master data. There must be some short dump occured.
There is also a chance that you are trying to load some invalid data (like ! character as a first character in the field) into the master.
Regards,
Yogesh.

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Similar Messages

Maybe you are looking for