Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav
Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM
Similar Messages
-
ERROR: Update mode C is not supported by the extraction API - R3 11
Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
MatteoHi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi -
Bi admin process chains- content master data load has failed
Hi Experts,
i worked with Bi Admin cockpit set-up, all the things are going fine
but Content Master data load (Attribute)has failed and i got the errors like
1)data records for package 1 selected in PSA-2 errors
2)Error 4 in the update
can anyone suggest me how can i sove the issue
regards
MrudulaHi
yes, i got 2 errors in Psa
when i click the 1st error i got like
Data record 10023 & with the key
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
And i it gave the procedure as
if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
And when i click the 2nd error
it has showed the data record as 10024 and remaing explanation is same like 1st one
in this i am not getting, how to proceed the solution.
plz help me anyone
Thanks and regards
Mrudula
Edited by: mrudularajesh on Jul 1, 2009 7:39 AM -
Master data loading delta failed
Dear All,
For master data loading, last delta got failed. we tried the reason for the failure but we couldn't find it. we want to know how to do last request repeat delta.
Good day.
Thanks and regards
Arun SHi Arun
Check the data in PSA. You can find erroneous data in PSA and correct the same. Save the data in PSA. You can manually update the data from psa or in process chain just repeat the delta step. Before doing that delete the error request from the data target.
Hope this helps.
Edited by: Chandamita Sarmah on Jul 6, 2009 2:04 PM -
Flat file data load to BW datatarget-update mode
I am loading Revenue data using flat file. I am not going to overwrite anything in my futur updates.
each time if I load I have to add the values.
Can I create
Flat file -> ODS--> Cube or
Flat file -
> cube.
In the transfer structure which update mode I need to set .(FULL/Latest status of changed records / Additive delta)
I have to create 2 infopackages-Initial load /Delta load
I am in BW3.5 system
Please provide some lights
ThanksHi
If I understand ur question correctly, I think
u can create both
Flat file -> ODS--> Cube or
Flat file -
> cube.
as u like
I think for flat file loading there will be no Initial/ delta load, u can do only full update
Regards
Naalla -
Hi Gurus,
My master data load is failing because of this error.
Record 20 :0CAT_GROUP : Data record 20 ('000200000012 '): Version 'D $$OSS001 ' is not valid
I went back to PSA and found out that I have 6 error records with values $$OSS001 .
0CAT_GROUP is a attribute of master data object
I checked in the master data extractors.These values are coming from ECC .
Can some one tell me how to get rid of these values and reload to Masterdata without errors.i am using BW3.5
Anyhelp would be appreciated.
NeoYou probably have to make appropriate change in settings in RSKC to allow certain characters. Otherwise the best way will be stop these at source, if they are really 'bad' data.
You could also visit the link below:
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
alternatively, you can write routine in transfer rules/ transformation by using
CALL FUNCTION 'RSKC_ALLOWED_CHAR_GET' -
Time dependant Master data load fail (Invalid time interval)
Hi,
I have IO 0HRPOSITION which is time dependant master data.
When I load master data I have maintained from date 01.03.2007 to end date 01.12.999 in scheduler.
But there are some positions records in HR system which have from date less than 01.03.2007 and because of that master data load is failing everyday.
How I can load only those records which fall in-between from date 01.03.2007 to end date 01.12.999???
Thanks
PramodHi Pramod,
I think you can put a selection in the Infopackage.
Thanks -
Hi Friends,
While loading master data from Process Chain, the load has been failed by having specail Characteristic in it. W e have edited that characteristic record in SAP R/3 system.
What we have to do now....... Should i have to Repeat the load Process in process Chain For that Object or should i do Manual Upadate from RSMO. There is another 2 process has to run below that master data object.
*************points Are Assured********
Regards
RevathiHi Revathi.....
Is ur load is through PSA?......look U hav edited in the source system.........not in BI side.......if the load is through PSA also.........records r still erroneous in PSA.......
Since u hav already edited in the source system............again editing in PSA is repeating the same job twice.........it is of no use.........
Since it is master data.................no need to delete the request from the target............actually data target means Infocube or ODS.........Master data is not a Data target.........u will not find the data target icon in the infopackage monitor or the data target tab in the infopackage Scheduler.........
Just make the QM status red and repeat the load in the PC............if it is a full load making the QM status red is not mandatory...............but for Delta..........it is mandatory...........since only then Init pointer will set back...........and the System ask u for Repeat delta.......
But another point...........Master data generally does'nt support Repeat delta...........if u try to do Repeat delta.........load will again fail with Update mode R.........then u hav to do re-init...........ie......
1)delete init flag
2)Do init with data transfer
3)then delta.....
Regards,
Debjani...... -
Error is Master Data load.
Hi Experts,
From last 1 month the ( 0MAT_UNIT ) master data load is getting failed. Its a full load. So the the target is not updated from last one month( August)
Now the problem is , when I am checking a report. The materials which are new or changed are not getting the data properly. It is because of the master data got stucked at PSA level.And I cant rectify at PSA level because, There is 673 errorneous record in 1 package.
I tried to find the invalid character , but didn't get anything.
Please suggest.
Thanks,
TapuKumarHi Anand,
This is the long text msg
Data records in the PSA were marked for data package 1 . Here there were
673 errors. The system wrote information or warnings for the remaining
data records.
System response
The data package was not updated.
Procedure
Correct the incorrect data records of the data package (for example by
manually editing them in the PSA maintenance). You can find the error
message for each of the records in the PSA by double-clicking on the
status of the record.
Note
Note that you are only allowed to edit and manually update the request
if it is contained in the request list in the data target. Where
necessary, first delete it from the data target.
And it is a master data load( Full ), The data target is a INFO OBJECT.
Please suggest, I can't rectify each and every reecord. Because the number of record id very high..
Thanks,
Tapu Kumar.
Edited by: NewToBW on Sep 2, 2010 1:42 PM -
R/3 Master Data Load Error
Hi Experts
Our master data load from R/3 to BW was failed today.
This is the error message on status Tab of failed request
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
I navigated through Environment -> Transact. RFC -> In source system"
In R/3 i got the following error
timeout during allocate / CPIC-CALL: 'ThS
#Timeout during connect
How shall i proceed now.
ThanksHi,
Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
Cheers,
Kedar -
Master data loads for Attributes and texts failing
Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
InderHello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder -
Error in Master data load because of ###
Hello,
I am getting an error in master data load.
The problem is ####### symbols are encountered in few records.
We have defined a formula to replace the ### with S in transfer structure.
But still it does not replace the #### symbols and gives error.
But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
Suggestions required urgently
Thanks in advance
RamHello srikanth,
Check the code below.
I have used it in the update rule to replace the #### symbol with A.
But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
GV_STRING = COMM_STRUCTURE-/BIC/XXX
FIND '#' in R_STRING.
IF SY-SUBRC = 0.
REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
ENDIF.
result value of the routine
RESULT = R_STRING
Thanks
Ram -
Master data load for 0COSTCENTER (Cost Center) failing
Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay ChonkarThanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar -
Error in Setting lock for Master Data Load
Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
BalaHi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP -
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan
Maybe you are looking for
-
FM SD_SALESDOCUMENT_CREATE on creating a sales order using reference
I create a sales order using a reference order number.On displaying it in VA02, and giving document flow, the reference document which I used to create the sales order gets displayed. A program/fm u2018Xu2019 is called on giving document flow (which
-
i want i tunes for windows xp 6d bit Regards Sunil.
-
External redirect to TabbedPanel within Index
Hi, I have a website that uses Spry tabbedPanels for its different pages areas. With that the URL never changes from the initial site. www.netsourcestorage.com when changing pages. I need to create an external link (page) that just redirects to my ma
-
Hello guys. I am new to Flash and would like some help from you guys. I would really appreciate it. Thanks, So, here is the problem. My friend has created a flash navigation bar for me. Since I can not add links here, huhtea is the address with com.
-
hi, i have created one condition type of BED whose calculation type is Quantity,so while maintaining condition record of that condition type sytem ask mi currency & unit of measure i.e inr & EA , now my question is if suppose material base unit of