Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1.  DTP has not been implemented yet. The system was just upgraded in July.  I am unable to schedule deletes from the PSA for successful loads.  However, I think the data is updating to the info objects.  My Info package has the selection to PSA then in the InfoObject package by package.  
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Similar Messages

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • PSA showing Request not updated to any data target using delta

    Hi BWers,
    I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
    Requests for PSA /BIC/Bxxxx
    I see the Request updated having a Red triangle with an exclamation mark in it and it says
    "Request not updated to any data target using delta"
    Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
    Thanks for all your help.
    Manish

    Reg : Delta Load : Production Data
    Current Scenario :
    we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
    Structure underlying infocube:
    2 Data Sources >> 1DSO >>1 Infocube .
    Usually the Data is loaded in delta format on daily basis using process chains.
    For last one month the delta is not picking properly :
    Example :
    A WBS Element is created 2 years back and it open and getting its update into BW ,
    latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
    I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
    its showing this error:
    Request not updated to any data target using delta,
    i went and created DTP which didnt help much Because latest isnt caputered .
    if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
    how to over come this as this is a production issue
    Obaid : pls help me on this issue , any others expert pls help

  • Request not updated to any data target using delta

    I am on BI 70 using 70 DataSource.  I executed InfoPackage in full update, then ran DTP in full mode.  There is only 1 data target.  The requests were successfully updated in the target DSO.  However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle. 
    My questions are:
    1.  Is this normal?
    2.  I need to do more full loads.  When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
    Thank you.
    Rebecca

    Hi Rebecca,
    To answer your questions
    1. Yes. This is normal.
    2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA)  would be re-loaded to the same data target .
    If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
    Hope this helps!
    - Meera

  • Error in psa level - Request not updated to any data target using delta

    Hi,
    This is pavan and am facing this issue any one know for below issue to solve.
    Data Flow is BW Version and Implemented in BI  7.20 version.The issue was data has come
    to psa level but from here it is not updated to infocube so for that i have tried update manually
    it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
    In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
    Regards,
    Pavan Kumar

    Hi Pavan Kumar ,
    Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
    and you will get monitor for that request then change the QM status to red after that load new request .
    Thanks
    Hanumanthu

  • Request not updated to any datatarget in BI 7

    Hi Experts,
    We have working in BI 7.0.
    1. There are delta loads are coming from LO extraction. As it is BI 7.0 till PSA data will be pull by Info Package afterwards DTP is going to take care to load further data targets. I can able to see the delta in my DSO but in data source level u201CUpdated Requestu201D was blank. And in Request update u201Crequest not updated to any data target using deltau201D. Even it showing this message but in DSO there is request number from DTP. Is any delta records are missing? If we are using DTP then it has update the Update Request as "Request Updated in data target"  in data source level, correct?
    2.  In order make delta from DTP. As we donu2019t have Init in DTP can we put Full load for initialization then another delta DTP. Hence Full is going to take care of Init in DTP?

    Hi Harsha
    I am really sorry.. still could not understand your questions !
    what do you mean by  "If I check in Data Source level Manage?" .. are you talking about PSA manage?
    Let me guess..
    You want to track a request which is in the dso...
    go the datasource(in BI) under your DSO.. you will find Info Pak's.. select the delta info Pak and click on monitor button on the top.. from there see the latest one and from there go the DTP and see whats the request Nbr whicg got into that DSO...
    There are bunch of other tables which will give you the same info as well.. like RSDSREQ*...
    and the last part " i.e what I'm wondering?".. Is that a question or statement.. I did not get it!
    Thanks
    KALYAN

  • "Request not updated" message misleading

    It seems that if I use a DTP using FULL extraction mode, the request in the PSA shows the status "Request not updated in any data target".
    This is not strictly true because it has been updated, only via FULL instead of DELTA.  I can appreciate that there is no need to track this, but the message seems misleading.
    I would suggest the message should be changed to a more accurate "Request not updated via Delta into any data target". Does that make sense, or am I misunderstanding the meaning of this status message?

    Hi kevin,
    with the new functionality the data from other source system through infopackage is stored till PSA only, regardless of whether it is FULL or DELTA....
    After that you create DTP for data transfer within BW i.e PSA to data target...
    Also this note from help.sap...
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred.
    Reward if it helps,
    ajay

  • PI 7.1 - CPA Cache not updated with directory data.

    Hi Gurus,
    I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <ConfirmationXML>
       <CacheRefreshError>
          <EngineType>
          AE
          </EngineType>
          <EngineName>
          af.sxd.mchir134
          </EngineName>
          <RefreshMode>
          C
          </RefreshMode>
          <GlobalError>
             <Message>
             CPA Cache not updated with directory data.
             </Message>
             <Trace>
             com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
         at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
         at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
    Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
         at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
         ... 7 more
    Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
         at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
         ... 9 more
    Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
         at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
         at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
         ... 11 more
             </Trace>
          </GlobalError>
          <GlobalError>
             <Message>
             Confirmation handling failed.
             </Message>
             <Trace>
             com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
         at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
         at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
    Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
         at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
         at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
         ... 7 more
    Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
         at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
         ... 9 more
    Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
         at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
         at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
         at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
         at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
         ... 11 more
             </Trace>
          </GlobalError>
       </CacheRefreshError>
    </ConfirmationXML>
    Please suggest the solution.
    Thanks,
    Surendra

    Guys,
    I have the same issue. Any help on this is appreciated!
    Issue log from CPA cache refresh
    <?xml version="1.0" encoding="UTF-8" ?>
    - <CacheRefreshError> 
    <EngineType>AE</EngineType>  
    <EngineName>af.sxd.pl1vw158</EngineName>  
    <RefreshMode>C</RefreshMode>  
    - <GlobalError> 
    <Message>CPA Cache not updated with directory data.</Message>  
    <Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>  
    </GlobalError>
    - <GlobalError> 
    <Message>Confirmation handling failed.</Message>  
    <Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>  
    </GlobalError>
    </CacheRefreshError>
    Regards

  • Sp L records are coming to the PSA and not updating in the data target

    Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
    Can so one can tell the reasons why this is happening? And give the solutions to it?

    Hi Sankar,
    If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
    Hope this helps...

  • Why are the date and time not updating in backups.backupdb folder?

    I just started using Time Machine on my early 2011 MacBook Pro running 10.7.2. After the initial full back-up and first few updates, the backup folder (on an external 1.5 TB Firewire drive) continues to show the original "date modified" of the very first back-up and lists the size as a ridiculous 2.48 GB. (Using BackupLoupe, I know it actually is 280 GB, reflecting the size of my internal HD). Any idea why this folder's info is not updating in the finder (even using "Get Info")? Are my back-ups really there? (It certainly seems so according to BackupLoupe).

    First, the best way to view or restore from your backups is via the Time Machine display, per Time Machine - Frequently Asked Question #15.  Using the Finder is not recommended.
    Do not worry about the dates.  First, the date modified only applies to the "parent" folder; that's not the Backups.backupdb folder, but the one inside it that's named for your Mac.
    Don't worry about the sizes, either.  On Leopard and Snow Leopard, the size of a backup folder was the total size of all the items that were on your Mac at the time of that backup (less exclusions).  On Lion, however, it's the "unique size" -- the size of items that appear only on that backup.

  • SQL 2008 R2 - Mirror sys.master_files data file size not updating

    Hi,
    I have an odd issue where the primary server is SQL 2008 R2 SP1 and the secondary is SQL 2008 R2 SP2. I have databases mirroring between these servers. We recently moved the log file on the secondary to a different drive. The file sizes match and are updating
    exactly the same between both servers. The mirror monitor shows the mirroring successful and everything is up to date. When we check the sys.master_files tables on the mirror, the size of the data file has not updated since moving the log file. Tried restarting
    SQL but not joy.
    Anyone have any ideas?
    Thanks
    Rob

    Hi,
    I would say you wait for some time it would get reflected I have seen this with sys.master_files they are updated late. Like when you delete heavy data, data would be gone but space captured by data would be  released slowly due to internal ghost operation
    cleaning and after this operation completes sys.master_files catalog is updated I guess this is what happening here as well , this is pure speculation. I will stick to this thread please look for a day and then update again
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • When Firefox opens my MSN homepage is out of date and will not update

    When Firefox (v 4) opens my homepage is out of date and will not update to the current date even when reloaded

    I'd recommend you delete the URL to your homepage which is causing the problem via Tools | Options | General and then go to the MSN homepage again and click the button "Use Current Page".
    MSN may have changed the coding in the URL which is causing Firefox to load an outdated page with your current settings.

  • I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

  • I have iCloud on my iMac, macbook and iPhone.  However, when I update my contacts on one, it does not update on any of the other devices.  The calendar seems to be working.  Any suggestions?

    I have iCloud on my iMac, macbook and iPhone.  However, when I update my contacts on one, it does not update on any of the other devices.  The calendar seems to be working.  Any suggestions?

    On the iMac and MacBook open System Preferences > iCloud
    Deselect the box next to Contacts, then reselect it then restart the Macs.
    On the iPhone tap Settings > iCloud
    Switch Contacts off then back on then restart the iPhone.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • My Adobe Reader Updater appears to be stuck and is NOT updating.  Any suggestions?

    My Adobe Reader Updater appears to be stuck and is NOT updating.  Any suggestions on how to fix?

    Download and run the Adobe Cleaner to completely remove Reader.
    Download the offline installer here: http://get.adobe.com/reader/enterprise/ and run it.

Maybe you are looking for