Master data table error in PC

Hi Gurus
i am trying to run a data transfer process for BPARTNER but when i do it it gives me an error...that master data table is already locked..how to go about resolving it..points not an issue

Hi,
Goto tcode SM12, give the user as * and then execute it & in the next screen search BPARTNER
there it will show you the entries for locks on this infoobject if any....
It will show you the user who locked, the process (Eg: Change Run or some other data load) which locked & so on....
& then if needed delete locks....
And then try starting your load...
Rgrds,
Habeeb

Similar Messages

Combination exists in Master Data Table, but error occurs in layout

Hi,
We are getting an error in planning layouts that state that a combination of Cost Center and Profit Center is not included in master data table for characteristic. I looked at note 1222910 that apparently fixes this issue, but we are on SP21 and the note was included in SP19.
Any suggestions?
Br,
Sonni

Hi there,
That seems an issue throwed by the characteristic relationships.
Are you sure the profit center/cost center issued in the message exist in the master data?
It seems some how you're getting that combination of that profit center/cost center in the planning layout and the charateristic relationship is validating that.
See if you query has the valid combinations for the profit centers/cost centers in the filter and/or variables.
Diogo.

Insert data in a user master data Table

Hi every body,
I've created a User Master data table named 'MyTable'. i want to add data to this table but there is an error which occur : 'to generate this. First Define the Numbering Series in the Administration Module'. I want to add data to this table using C# code, without using UDO.
Is it possible?
Thank you for helping me
Haifa

Hi,
thank you for your answer.
I didn't understand very well, i will ask the question in an other way.
it is possible to insert records in a master data table by using the code C#
I mean :
            usertable = _Company.UserTables.Item(tablename);
            usertable.Code = code;
            usertable.Name = name;
            usertable.UserFields.Fields.Item("U_ContCode").Value = ContCode;
            usertable.UserFields.Fields.Item("U_CardCode").Value = CardCode;
            lRetCode = usertable.Add();
without encountering the problem of numbering series.
Haifa

Customer master data table KNVV is missing

Hi All
I a trying to cancel the billing document using transaction VF11. System shows error as " customer XYZ customer master data table KNVV is missing"
Please advice how to proceed?
Thanks and regards
satyaprasad

Hi,
Goto the T.Code "Se11/SE16".
Enter the table name as "VBRK".
Enter your invoice number.Execute.
Check the value of "VKORG(Sales Organisation)","VTWEG(Distribution Channel)" and "SPART(Division)".
Or you check the same in "VF03" screen also.
Make a copy of the above three fields.
Goto the T.Code "Se11/SE16".
Enter the table name as "KNVV".Enter your customer number in "KUNNR" and the values of "Sales organisation,Distribution channel and division" into their respective fields.Execute.
Check if there are any entries.The result should be no entries so that only you will receive this error message.
If you created the customer with out sales area,while creating the order only it will give you an error message as "No customer master record exists for sold-to party XXXXXXX
Message no. VP199".
As the partners are defined in sales area data only.
Regards,
Krishna.

Master Data activation error after transport

Hi,
we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Any suggestion?
Thanks
Alberto

we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
I tryed to re-transport but i have always the same error.
I already gave you option-1 above. Here is my thinking.
Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
ext, run the RSRV test on the InfoObject in DEV.
After you do this, collect this InfoObject in a new transport and move it to Test.
I am not sure it wil solve the problem, but its worth a try.
But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
Uday-Ram Chamarthy

Characteristic 0PROFIT_CTR: Time-dependent Master Data Table '/BI0/QPROFIT_

Hello All,
I want to release a infoObject 0PROFIT_CTR to Prod. But after releasing the TR it errors with the following messages:
Characteristic 0PROFIT_CTR: Time-dependent Master Data Table '/BI0/QPROFIT_CTR' not buffered
Characteristic 0PROFIT_CTR: Time-dependent Text Table '/BI0/TPROFIT_CTR' not buffered
I went into these tables and also have set the buffering to ON and made them Fully buffered (Checked).
But even then it gives me same error.
Please help.
Regards,
KP

Hi Harika,
You are right, you will have to use SE14 in production system, just check that whether you have authorization to use it or not. If you don't have authorization then you can check with Basis team.
You can execute SE14, then give table name and in the lower part of the screen Click on the option Save and adjust, and activate the table. Once this step is done you can re-import your request.
Make sure that you do not delete data.
Regards,
Durgesh.

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

Abap code not working - deleting based on master data table information

Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM    XSOURCE
0999               IND01
0888               IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE                             /M/CODENUM
IND01                                       0999
IND01                                       0888
IND01                                       0555
IND01                                       0444
FRF01                                      0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PM

It's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
      r_srce TYPE RANGE OF char5, "Range Table for Source
      s_srce LIKE LINE OF r_srce,
      r_code TYPE RANGE OF numc04,"Range table for Code
      s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
          s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

M or P master data table to be used in routine read statement

Hi
I update of a DSO i had a requirment for a routine to get the Attribute of a Infoobject.
So which master data table M or P table i need to use in my read statement and why
Thanks

Use M table as it it the view on time dependent(P table) and time independent(Q table) tables.
M table is view on time dependent and time independent attributes, you can see characteristic values and all the attributes for the Characteristic.
The tables that go in the view are the Master Data Table and the Time-Dependent Master Data Table. If the characteristic only has time-dependent attributes, only the time-dependent master data table goes in. If the characteristic has only non-time-dependent attributes, only the master data table goes in.

Which master data table to be used to get attribute value

Hi all,
I am writing routine in update rule to get data for one master data attribute of master data 0customer.
But I am cofused in choosing master data table to get data.
There are two master data table in master data tab of 0customer characteristics.
1. View of MstrDtaTbls :- /BI0/MCUSTOMER
2. Master data tab :- /BI0/PCUSTOMER
Suggest me which one to take .
Although I have tried with 2 one and it is working fine.

Hi,
If the attribute is not time-dependent please use /BI0/PCUSTOMER, else use /BIC/QRCOSTCTR.
Just remember P table and Q table.
Regards,
Frank

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

How to check the records in Master Data Table?

Hi,
   I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
I done the following way:
Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
But it's not showing the records.It's asking like CID from......To......
                                                                    CID(SID)from.............To.......
                                                                     here CID means customer id(characteristic).
and showing some settings.
Please guide me.
Thanks & Regards

Hi Sri,
Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated data in to master data info object.
regards
sap

Master data table error in PC

Similar Messages

Maybe you are looking for