Master Detail page. - Create Row.

Hi
I have created a master details search page using the following BC4J objects
EmployeeEO - empId,name,deptno
DepartmentEO - deptno,deptname
EmpToDeptAO - using deptno
EmployeeVO - contains all Attributes of EmployeeEO
DepartmentVO -contaiins all Attribute of DepartmentEO
EmployeeAM contains both VO
The search page is working fine.
In the Search page i have created a create button.When this click this button will be forwarded to create page.
In the create page under the pagelayout region i have two table regions
one Employee Details Entry and the second one deparment details entry.
i have added apply button to the page.
in Process request of controller i have invoked the two create(insert row) methods (one for employeeVO and another for departmentVO)which resides in AM.
in process form request when apply button is pressed, i will commit the details.
Employee details getting committed but department details is not getting committed.Its throwing some exception like the Fonreign Key constraint violated.
but if i give some department no which is already existing in department table region both is getting committed.
How to handle this problem.
how to issue commit separately for master and detail.
Am i clear with the explanation.
Edited by: user10613877 on Dec 13, 2008 9:04 AM

I guess you will also need a View Link between the the 2 VOs.
Also the attributes that would be used to join, should be declared as Key Attributes. Here in your case, Dept_Id should be the key Attribute in both the VOs.
You can refer this link.
[master-detail mandatory steps|http://apps2fusion.com/at/ps/333-oa-framework-master-detail-region-mandatory-steps]

Similar Messages

  • Exporting Master/Detail page in Flash...

    Hi...
    Is it possible to have a master/detail page created in
    Dreamweaver like these (ASP or PHP):
    http://www.macromedia.com/support/dreamweaver/building/master_detail_net/
    http://www.macromedia.com/support/dreamweaver/building/master_detail_php/
    to be displayed in a flash scrollable box maintaining the
    ability to click on the single items and view their details?
    Thanks.

    Hi,
    It can be achieved using View Link.
    More information can be found at ToolBox Tutorial Guide.
    Regards,
    Gyan

  • Bc4j:RowScope on a Master Detail page always returns 0 rows for detail

    Hi,
    I have a problem with a Master Detail page that is called from another page. The Master Detail page has two View Objects, Budgets and Budget Versions. These are linked properly in BC4J and when I use these VOs together I can navigate through the Budgets (master) and the Budget Versions (details) are populated correctly.
    However, I want to navigate to this page from another page which lists all possible Budgets. I pass the key of the selected Budget to the Master Detail page and the correct Budget is displayed, BUT the Budget Versions are NOT displayed - I get 0 rows returned.
    The mechanism I use to pass the selected Budget ID to my Master Detail page is:
    <ctrl:property name="key">
    <ctrl:selection name="ViewTable" key="key"/>
    </ctrl:property>
    My BC4J Registry is set up as follows:
    <bc4j:registryDef>
    <bc4j:rootAppModuleDef name="BudgetModule"
    defFullName="BudgetPackage.BudgetPackageModule"
    configName="BudgetPackageModuleLocal"
    releaseMode="stateful">
    <bc4j:viewObjectDef name="ItiBudgetsView1">
    <bc4j:rowDef name="CurrentBudgetRow" usesCurrency="True">
    <bc4j:propertyKey name="key"/>
    </bc4j:rowDef>
    </bc4j:viewObjectDef>
    <bc4j:viewObjectDef name="ItiBudgetVersionsView2" rangeSize="15"/>
    </bc4j:rootAppModuleDef>
    </bc4j:registryDef>
    I then use
    <bc4j:rowScope name="CurrentBudgetRow">
    to get the correct Budget row in my master VO. But this always returns 0 rows in my detail VO. If I comment out the rowScope element, I don't get the desired Budget row, but I do get the correct Budget Version rows displayed. Is the rowScope element on the Budget VO interfering with the Budget Version VO?
    Hope this is not too confusing!!
    Thanks,
    Steve

    Steve,
    I tried to create a comparable set of two pages and initially ran into the same problem. I just realized that my issue (which I hope is yours too) is that the rootAppModule name was different across my two pages. This led to each page having its own application module instance, so the currency was different on each page.
    By changing all of my pages to use the same application module name (in the registryDef, in the appModuleScope tags in the page, and in the findAppModule tags in the handlers), I resolved this problem.
    My event handler to go to the master/detail page from the master page, FYI, looks like this:
      <event name="details" >
       <bc4j:findRootAppModule name="MyApp" >
        <!-- establish the ViewObject scope -->
        <bc4j:findViewObject name="CustomersView1" >
         <!-- find the selected Row -->
         <bc4j:findRowByKey>
          <bc4j:keyBinding>
           <bc4j:selectionKey name="viewTable" key="key" />
          </bc4j:keyBinding>
         </bc4j:findRowByKey>
        </bc4j:findViewObject>
        <bc4j:executeQuery />
        <go name="OrdersByCustomer_View" redirect="true" />
       </bc4j:findRootAppModule>                     
      </event>Hope this helps.
    -brian
    UIX Team

  • How to Create Master Detail Page with Query Region

    Hi,
    1. I have a requirement that i need to create a Master(Supplier) Detail(Supplier Site) Page with Query Region.
    Eg. Supplier A in Australia has Supplier Sites X in Melbourne and Y in Sydney.
          Supplier B in US has Supplier Sites C in New York and D in California.
    I need to have Search, based on two fields Supplier Name and Country
    Let us assume i am searching with Supplier Name A then the page should be in the below layout
    Query Region
    Supplier Name : A
    Country:
    Master
    Supplier Name  Country
        A                     Australia
    Detail
    Supplier Site  City
    X                   Melbourne
    Y                   Sydney
    In detail VO it should allow me to add new sites which means i need to connect this VO to database to insert new records
    I have gone few threads and understood that this can be achieved by creating SupplierVO, SupplierSiteVO and a ViewLink.
    But when tried i don't know how can i relate my query region with the Suppleir Table(Header Reagin and Table Using Wizard) and Supplier Site Table(Header Region and Table Using Wizard) i am not sure if i am correct or not, please advise
    2. Also i need to have a Open button in this page and if click the button it should navigate to some other page.
    Please help me how can i achieve this.
    - How to design my page with query region and master detail tables
    - what is the AM and CO code need to be handled
    - What is the code should i write in Open button to open new OAF page.
    Thanks,
    CSK

    Hi,
    This link will be useful for your requirement.
    Master Detail Page using Hide Show and Advanced Table inside Advanced Table - OracleArea51.com
    Let me know if you need more help in this.
    Thanks and Regards,
    Myvizhi

  • Can I link from Interactive report Page 1 to Master Detail page 2?

    Hi folks-
    I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
    I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
    I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
    Do I create the Interactive Report, and customize the 2nd page, to add a region?
    Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
    Can someone please give me a nudge as to the sequence I should be doing?
    (As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
    Thank you
    Marion

    Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
    Perhaps I can explain in better.
    I want one page as an interactive tabular report (of the master records)
    I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
    ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
    OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
    So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
    I'm soo close to what i'm trying to do!
    Thank you for your continued patience and assistance
    Marion
    here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
    SELECT
    "PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
    "ENTITIES"."ENTITY_ID" "ENTITY_ID",
    "ENTITIES"."FIRSTNAME" "FIRSTNAME",
    "ENTITIES"."LASTNAME" "LASTNAME",
    "ENTITIES"."COMPANY" "COMPANY",
    "PHONENUMBERS"."PHONE_ID" "PHONE_ID",
    "PHONENUMBERS"."PHONETYPE" "PHONETYPE",
    "PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
    "PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
    FROM
    "PHONENUMBERS",
    "ENTITIES"
    WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
    Edited by: mtpaper on Oct 12, 2009 1:30 PM
    Edited by: mtpaper on Oct 12, 2009 1:32 PM

  • Master & Detail Pages

    Hello all,
    I am asking for help on creating Master - Detail pages. I am using Wamp version 2. Database name "TestingCo" with 3 tables:
    Users:      user_id                int(4)           Primary_Key
                   user_fname          varchar(30)
                   user_lname          varchar(30)
                   user_license_id    int(4)
                   user_pix_id          int(4)
    Licenses: license_id           int(4)             Primary_Key
                   license_no          varchar(10)
    Pictures:  pix_id                 int(4)             Primary_Key
                   pix_url                varchar(50)
    1. I create a recordset called: rsMasterDetail:
         * with all fields from all 3 tables.
         * Where users.user_pix_id = pictures.pix_id AND users.user_license_id = licenses.license_id
         * Order By users.urser_fname
    2. On Master page, I insert Master Detail Page Set:
         * Master page fields: All fields from rsMasterDetail recordset.
         * Link to Detail from: user_id          / later I tried: user_fname         
         * Pass unique key:   user_id          / later I tried: one by one from each field of Users table.
         * Show: All records
         * Detail page name:     Detailpage.php
         * Detail page fields:     All from rsMasterDetail recordset.
    3. Result: (I always get the same result as below).
         * Masterpage.php - perfect - All correct display between 3 relational tables
         (*) Detailpage.php - when I click on any link from the Masterpage.php:
              - All the fields from Users table are displayed correctly depending on which link I clicked on Masterpage.php
              (+) The fields from table Licenses are displayed the first row only (1st record of the table.)???????????????
              (+) The fields from tabel Pictures are displayed the first row only???????????????
    A. When I built the rsMasterDetail recordset, I test it and the result is good.
    B. The masterpage.php shows all fields in perfect order.
    There must be something wrong when the information passes from Master page to Detail page!??!!???
    Please help me!
    Thank you

    Hi Lon,
    When I test it, the tables relationship is perfect since all three tables line up correctly on the masterpage.php. If there is problem with tables relationship, I should also have such problem with the masterpage.php.
    I, once tried to build another recordset called: rsTest. This time I had only 2 tables: Users and Licenses. The result was the same; only the first row of the licenses table would show on the detailpage.php; while the masterpage.php the rows on both tables line up correctly.
    I have tried many ways to find solutions unsuccessfully. What I get so far is:
    * The recordset is display correctly every single time when I click the "Test" button, as well as on the masterpage.php (I meant the tables relationship).
    * When the link on the masterpage.php is clicked, the detailpage.php supposes come up and display all rows of 3 tables of the linked record. However, all rows of the 1st table are correctly displayed, and the other table(s) only show its first row regardless which link on the Masterpage.php was clicked.
    I hope you and others gurus can help me out.
    I appreciate your help.

  • Refresh problem by combination of programmatic view and master-detail page

    I am using the latest versions of both ADF (10.1.3.2.0.4066) and JHeadstart (10.1.3.1.26) and I have an application with 1 page in which I have as root page a programmatic view (table-form) which I fill with request parameters.
    Under that programmatic view I have a master (table) with 3 detail pages (table).
    The programmatic view is populated with always 1 row, which goes always correct.
    The problem is occuring when iterating through the first entity based master table which contains lots of rows. Then the problem is that when you navigate through the master table the detail pages are refreshed correctly, but when you navigate back to the first row that row won't get updated.
    The next thing I tried is create a new jheadstart application with only the master-detail pages (entity based), so without the programmatic view, and then the iterating through the master table and the refresh of the child tables is working correct.
    What can be the problem here.

    Have you tested this in the ADF Business Components Browser? That's the tester that you can find by right-clicking your ADF BC Application Module and choosing Test. If you go to the View Object instance for the programmatic view, and using the ViewLinks to its children, do you get the same behavior as in the JHeadstart application?
    kind regards,
    Sandra Muller
    JHeadstart Team
    Oracle Consulting

  • APEX 4.0.2 Error on Master Detail Pages - 'length' is null or not an object

    Greetings,
    We just upgraded to APEX 4.0.2.00.07 this past weekend. Now a JavaScript error occurs when Master Detail pages are opened in IE 8. The error is - 'length' is null or not an object. I do not have a page item named length on any of these pages.
    The error does not occur in Chrome or Firefox, but the Add button on the detail portion of the page simply doesn't work.
    The page works when creating the master portion of the page. After the master row is created the region to add detail rows appears and the error occurs. So, the error appears to be with that part of the page.
    We use an Inactive Date column to soft delete rows in the detail portion of the page, so the detail regions have a date column, just in case this column is the problem.
    Does anyone have an idea what the problem might be?
    Thanks, Tony

    I too had this same problem and determined that the problem was due to a missing underscore character between the literal "report" and the report Id in the report template.
    I guess some themes include this underscore and some don't.
    I had to debug the apex_4.0.js to determine this - not easy as it's not nicely formatted.
    It only seems to stop Pagination working in an Updatable Tabular Form Report.
    Edit the Report Template. Go to the "Before Rows" region and edit the Before Rows text box. Locate where it defines the report id and insert an underscore between report#REGION_ID#
    Previous
    &lt;div id="report#REGION_ID#"&gt;
    Fixed
    &lt;div id="report_#REGION_ID#"&gt;

  • Possible error when using ADFBC selectOneListbox in a master-detail page

    Hi Everyone,
    I'm trying to setup master - detail page with ADF BC, using Dept / Emp.
    I want to use a listbox for the master object, rather than the form + navigation commands as shown in the classic demos, so I've setup a listbox as following:
    <af:selectOneListbox value="#{bindings.DepartmentsView1.inputValue}"
    label="Available Flows:"
    id="listbox_depts">
    <f:selectItems value="#{bindings.DepartmentsView1.items}"
    id="id_Selcet_Items"/>
    The details element is the classic read-only table created by dragging the Employees view (under the departments) into the page.
    The problem arises when I run the page - the list box shows all the departments, but when I click on different departments the table data does NOT change (as it would when navigating between rows with the classical form navigation buttons).
    I've set up the Table's partial triggers to both of the listbox ids: id_Selcet_Items and listbox_depts but this doesn't help.
    Is this a bug, or am I doing something totally wrong?
    Tal.

    Tal,
    You need to drop the Dept collection onto your page as a navigation list.
    Blaise

  • Master Detail page join

    I am trying to create a master - master -detail page
    environment in PHP which uses joining between two tables within the
    same MySQL db.
    The first page (chessmenu.php - recordset chessmenu) displays
    a list of chessboard types from a MySQL table called chessmenu in
    the chess db:
    The 3 fields are:
    itemID (auto_increment),
    itemName (ie. Marble) and
    itemType (M)
    (NOTE: In this test, there are 3 rows, Marble, Glass and
    Theme -
    itemType will be my joining field, M, G, and T respectively
    - which are all unique)
    I want this first page to link to the next page and send the
    URL parameter = chessboards.php?recordID=<?php echo
    $row_chessmenu['itemType']; ?>
    I created the second page (chessboards.php - recordset
    chessboards) and made the FILTER within the recordset as follows:
    itemType = URL Parameter recordID
    When I run the first page, displays the proper items,
    however, when I click one of those items (ie Marble (M)) it
    displays nothing on the second page. I ran the query TEST on the
    second page in the recordset filtering and when I enter M, it
    displays the correct records (2 total).
    They would then select the type of Marble Chess board from
    the second page, which would then, send them to the detail page (3
    pages total, thus my comment about Master, Master, Detail)
    What am I doing wrong? Am I sending the URL Parameter
    incorrectly? Any help would be appreciated. I thought I was
    following the instructions in the TUTORIAL on this site:
    "If the recordsets are different, make sure the recordset on
    the detail page contains at least one column in common with the
    recordset on the master page. The common column is usually the
    record ID column,
    but it can also be the join field of related tables."
    BTW - Both ItemType fields in both Tables are the same
    (CHAR(1))
    Thanks,
    Steve

    On Mon, 11 Dec 2006 04:03:08 +0000 (UTC), "omnigate"
    <[email protected]> wrote:
    >UPDATE: This does work (forgot to refresh the page in
    testing) to a limited
    >degree. As I mentioned above, when it sends the URL
    Parameter from first page
    >to second page (itemType = M), the second page IS
    receiving the info, HOWEVER,
    >it only displays the first record (There are 2).
    >
    > Is there a way to get the URL parameter to pick up
    multiple records or am I
    >just going about this the wrong way. Thanks.
    Are you using a Repeat Region server behaviour on your second
    page?
    Steve
    steve at flyingtigerwebdesign dot com

  • Question on "Master Detail page using ADF" sample

    I downloaded the "Master Detail page using ADF" sample application. I modified editDepartment.jsp page to include the Commit button as follows:
    <html:submit property="event_Commit">Save and Commit</html:submit>
    When I go to edit a department record and click on the new "Save and Commit" button, I SQLed the DEPARTMENTS table and noticed that the edits were not commited. I also restarted the embedded OC4J server and still get the same results. For some reason, the department view object contains the modification but the entity object doesn't. Why?

    Scott,
    My colleague suggested a workaround, which is to explicitly include the detail table's id in the master table's partialTargets list. So, for example, in MasterDetailDP.uix, changing:
    <table model="${bindings.DepartmentsView1}"
           id="DepartmentsView111"
           partialRenderMode="multiple"
           partialTargets="_uixState">to:
    <table model="${bindings.DepartmentsView1}"
           id="DepartmentsView111"
           partialRenderMode="multiple"
           partialTargets="_uixState EmployeesView312">...will cause the detail table to be updated when sorting the master table.
    There is some question about whether sorting a table should actually cause the currently selected row to change - we're still discussing this point.
    Andy

  • Master / details pages set in a .htaccess protected directory

    Hi
    I am using Dreamweaver CS4 functionality to create a Master/Details page set. I have done this many times before without a problem, however, i am now trying to create the master / detail page set in the members area of a web site. The directory that contains both the master and the details page is .htaccess protected which means that the master page works fine but the details do not get passed to the details page. The details page remains blank where the echo statements should be. If i copy  the exact same master and detail pages and then paste them in to an unprotected directory the pages work fine and the details are passed from the master to the details page without a problem.
    I have been unable to find any information on this so any help would be gratefully received.

    I'm not using secure access (https). I started with the most basic configuration, standard http: on port 80, etc. The configuration works perfectly fine when tested on my home PC. The problem seems to be in Safari on the iphone it prompts me for a login, and accepts it.. then it fires up the media/movie player and I'm guessing it's not passing the authentication/credentials/whatever to the movie player. When the media tries to play, it notes it's an access controlled file and just quits out. The movie player doesnt seem to allow asking of login/password info. Thoughts??

  • Search Panel in Master-Detail Page

    Hi experts,
    I've stuck to a wierd problem, where i've implemented a master-detail relationship in a page. This works fine.
    I've also created a search page seperately for this. But now, i'm confused on how to add an item into the searchPanel which would be mapped with a detail attribute.
    For E.g:
    ===============================================================
    SearchPage: (1st Page)
    Item1 __________________
    Item2 __________________
    Item3 __________________
    GO CLEAR
    ResultsTable:
    Item1 || Item2 || Item3
    ==============================================================
    CreatePage: (2nd Page)
    Master Details.... CANCEL APPLY
    Item1 ____________________
    Item2 ____________________
    Item3 ____________________
    Details .....
    Item4 || Item5 || Item6
    CANCEL APPLY
    ===================================================================
    **Now i wanna add "Item4" into the search panel of the SearchPage. I hope its clear to you, in case not, just poke me once.
    Regards
    Ari

    Oh !! Gosh Keerthi,
    I know that, how to add attributes into the searchPanel. U're not getting the pulse of the problem. Lemme explain it once again...
    I've got two VOs .. Lets say !! MasterTableVO and DetailTableVO.
    Now in the "SearchPage", i've referenced only the MasterTableVO from advancedTable and got simpleSearchPanel on advancedTable where i've 3 items ITEM1,ITEM2,ITEM3 (these 3 r MasterTableVO attributes.)
    **As this is a master-detail page .. so for each master table record, there r multiple detail records entered in the 2nd Page.
    Now supposedly, i wanna search only those master detail records in the SearchPage which contains a certain "XYZ" value for the ITEM4(this is in DetailTableVO) in the detail records.
    So, To your inquiry .. No, Item4 doesn't exists in the VO referenced in the advancedTable of the SearchPage.
    Regards
    Ari :)

  • Spry Tabbed Panels and Master/ Detail Page Set interraction

    Hi,
    I have created a feedback form and am using a Spry Tabbed Panel to allow users to review all responses to one question and then all responses to the next question in different tabs, there are 6 tabs in all. In each tab I have created a Master/ Detail Page set - well actually just the Master appears in the tab. This is working fine. I allow up to 20 responses to be shown on each tab, after which the user selects First/Previous/Next/Last. When they do this the screen refreshes and the tabbed panel display goes back to the default tab, clicking on the tab previously used correctly displays whichever of First/Previous/Next/Last the user selected. I'd like the display to remain on the user's current tab when they select First/Previous/Next/Last.
    The page in question is here http://www.hollisterairshow.com/feedback-results2.php, then scroll about half way down the page and select one of the tabs.
    Thanks.
    Tony

    Hi Tony,
    Look at the following, blue coded is comment only, red coded is what has to be added to your existing code and orange coded is added by the SpryDataSet creator if done properly. Where the orange part starts, thats where you place your cursor when creating the dataset.
        <p> </p>
       <div id="TabbedPanels1" class="TabbedPanels">
          <ul class="TabbedPanelsTabGroup">
            <li class="TabbedPanelsTab" tabindex="0">All feedback</li>
            <li class="TabbedPanelsTab" tabindex="0">Suggestions for improvement</li>
            <li class="TabbedPanelsTab" tabindex="0">What did you like the most</li>
            <li class="TabbedPanelsTab" tabindex="0">What did you like the least</li>
            <li class="TabbedPanelsTab" tabindex="0">What else would you like to see</li>
            <li class="TabbedPanelsTab" tabindex="0">Any other comments</li>
          </ul>
          <div class="TabbedPanelsContentGroup">
            <div class="TabbedPanelsContent">
              <table border="1" align="center" id="allFeedback"> .... start feedback table tag (line 763)
                <tr>
                  <td width="80"><strong>Feedback Number</strong></td>
                  <td><strong>Days attended</strong></td>
                  <td><strong>Arrived by</strong></td>
                  <td><strong>Arrival arrangements</strong></td>
                  <td><strong>Expectations met</strong></td>
                  <td><strong>Ticket price</strong></td>
                  <td><strong>Zip code</strong></td>
                </tr>
    .................... rest of table probably your PHP repeat area
                  </tr>
              </table> .... end feedback table tag    
              <div spry:region="dsAllFeedback">
                <table>        
                   <tr>
                    <th spry:sort="Feedback_Number">Feedback Number</th>
                    <th spry:sort="Days_attended">Days attended</th>
                    <th spry:sort="Arrived_by">Arrived by</th>
                    <th spry:sort="Arrival_arrangements">Arrival arrangements</th>
                    <th spry:sort="Expectations_met">Expectations met</th>
                    <th spry:sort="Ticket_price">Ticket price</th>
                    <th spry:sort="Zip_code">Zip code</th>
                  </tr>
                  <tr spry:repeat="dsAllFeedback" spry:setrow="dsAllFeedback" spry:odd="row_odd" spry:even="row_even" spry:hover="row_hover" spry:select="row_select">
                    <td>{Feedback_Number}</td>
                    <td>{Days_attended}</td>
                    <td>{Arrived_by}</td>
                    <td>{Arrival_arrangements}</td>
                    <td>{Expectations_met}</td>
                    <td>{Ticket_price}</td>
                    <td>{Zip_code}</td>
                  </tr>
                </table>
              </div>
              <br />
              <table border="0">
    I hope this helps.
    Ben

  • Spry Tabbed Panel and Master/Detail Page Set interraction

    Hi,
    I have created a feedback form and am using a Spry Tabbed Panel to allow users to review all responses to one question and then all responses to the next question in different tabs, there are 6 tabs in all. In each tab I have created a Master/ Detail Page set - well actually just the Master appears in the tab. This is working fine. I allow up to 20 responses to be shown on each page, after which the user selects First/Previous/Next/Last. When they do this the screen refreshes and the tabbed panel display goes back to the default tab, clicking on the tab previously used correctly displays whichever of First/Previous/Next/Last the user selected. I'd like the display to remain on the user's current tab when they select First/Previous/Next/Last.
    The page in question is here http://www.hollisterairshow.com/feedback-results2.php, then scroll about half way down the page.
    Thanks.
    Tony 

    Hi Tony,
    Have a look here http://labs.adobe.com/technologies/spry/samples/data_region/PagingSample.html and here http://labs.adobe.com/technologies/spry/samples/data_region/SpryPagedViewSample.html
    If you need further assistance, go to the Spry Forum http://forums.adobe.com/community/labs/spry
    I hope this helps.
    Ben

  • How to dynamically disable interactive report filed in master detail page

    I am using APEX 4.0 & very new to APEX. I am not able to make disable a filed in detail region (which is a interactive report) of a master detail Page.
    I.e. want to disable field of a row based on value of another field for same record, just like set_item_instance_property of oracle forms. Please help me out.

    its working fine for tabular form. But not working for master detail form (for detail section). Can you please help me out

Maybe you are looking for

  • Page Total in xml publisher layout

    Hi all, I have a requirement to calculate page wise total and grand total of an amount column in xml publisher layout. I tried with <add-page-total> and <show-page-total> tags, but grand total is displaying in all the pages. I need to display page wi

  • Has anybody got avelsieve to work with Snow Leopard Server?

    I have been trying (in vain so far) to get avelsieve running on 10.6.server. When I add the plugins to squirrelmail (avelsieve 1.9.9 with or without javascript_libs 0.1.2), logging into web mail hangs and the web error_log has lines like [Sat Sep 25

  • Installation OID & OEM

    After an ostensibly 'clean' install of 8.1.6.0.0 Enterprise Management Infrastructure; Custom option; all features, typical Net8 & Default DB settings I have problems. From the services panel I check the box that allows the service to talk to the des

  • AME rendering outdated AE content

    It appears that AME CC (7.1.0.174) will render  dynamic-link content in whatever state it was in when it was opened. Example: I have a Premiere project that has a text card that is dynamically linked from AE. If I open AME, then hide the text in the

  • How can I change the language on my phone?

    It seems I have 2 languages that matter for my iphone, one that appears throughout my options and one that affects my calendar and notes "apps". They appear in spanish while the rest of my phone appears in the other. How can I change the language fro