Master iPad configurator question concerning cart syncing with different versions of iPads.

I have a question concerning configurator syncing.Can the master iPad be a different version of iPad than the other synced iPads? For instance can iPad 2 be the master iPad to a group of iPad Air's? The iPad 2 has some fewer capabilities than the Air, would some settings or restrictions be left off of the iPad Airs if they were set up this way? Thanks.

There is no such thing as 'master iPad'. If you're using Configurator or Profile Manager control of the setup is done from a Macintosh.

Similar Messages

Iphone synced with different version - purchases will be erased?

I have had problems with itunes which resulted in having to relocate the program to a different directory on the same PC (vista).
Now when I plug in my iphone it says it is synced with another version of itunes and therefore if I sync music (for example) everything will be erased from the iphone.
Does this mean I will lose purchases of songs made directly to the iphone before syncing (and also purchased apps)?
If so, does anyone know how to avoid losing everything...?

Use the Transfer Purchases command in iTunes prior to syncing.
(54542)

Eclipse XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.

I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine,
but happens now that i need to have a xsd and wsdl with business names and not table names, invented to create a xsd and wsdl file in jdeveloper
and then went to eclipse and tried t xquery tranformation, but when i add the replace in the message flow in the filed in Variable : body and Expression i look for the xquery and in the binding trying to put
$body/input parameter, get the following error [RouteNode1, Replace action] XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.
what im doing wrong or its configuration
thanks in advance sonia

thanks
ok have created a table with only in column varchar2(1)
then the type object and the procedure to insert it works the proxy in the osb if i test it inserts
now in jdeveloper i created an xml file with
<?xml version="1.0" encoding="windows-1252" ?>
<vessel>
<barco>a</barco>
</vessel>
then i created a xsd based on this xml, and a wsdl based on the xsd
in eclipse created a xquery transformation and selected source as the xsd created in adf and target the xsd input parameter, dont know why in the purple ball of the input parameter it puts a ?, an a f.
then in the proxy xpath not writing anything in variable body and in the expression select the xquery and in binding select the parameter

Remote missing - iPad synced with different apple tv

I have an Apple TV that I grabbed as I left for leaving for vacation. Forgot the remote. Realized the ATV is not synced with my iPad either. I have 2 Apple TV units synced with different iPads. Unfortunately left with the wrong
iPad. Forgot the remote which makes it complicated. Is it possible to work around this even with the Apple TV username and password and iPad being different ID? Downloaded remote app from Apple but I'm stuck.

Welcome to the Apple Community.
Unfortunately, you would need the original remotes to do what you want. You could purchase one if you have access to a near by Apple store, but you may find it won't work any way, with the wifi your hotel provides.

3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Can PI work with different versions of MQ?

Hello
I have requirment to let PI (7.1) communication with different versions of MQ (5.3 and 6.0). However I doubt that this is possible.
As for MQ, the JMS drivers of the MQ needs to be deployed to PI. For MQ 5.3 and 6.0, different drivers (6.0 has additional jar files as 5.0) are to be packaged into com.sap.aii.adapter.lib.sda and deployed to PI. There is no way you can deploy different version of drivers onto the same PI box. even if you can deploy different version of hte driver to PI box, it won't work in runtime, simply because, when the driver is loaded, there is no way to tell PI class loader which version of class (driver) to load.
how do you guys think of this?
Thanks
Jayson

Hi
I think that the 6.0 version should be backword compatible and should work with 5.3 also.
Did you tried it?

Java Cache Viewer shows duplicate URL with different versions

In doing some testing lately we have come across a couple of situations where the same URL is showing in the JAVA cache viewer with different versions to them. In the case of a 1.7 JRE this is not causing any adverse effects however when utilizing a 1.6 JRE we are getting messages about mixed mode for the JAR files.
The jar file is signed as below:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Application-Library-Allowable-Codebase: *
Application-Name: named_applet
Built-By: relbuild
Permissions: all-permissions
Created-By: 1.6.0_17-b04 (Sun Microsystems Inc.)
Caller-Allowable-Codebase: *
Codebase: *
understanding the need to change the wildcard's to domains as we move forward. I am wondering why the jar file is being listed and called twice and why it is being recognized as signed one time and not the next.
The URL is identical in the cache viewer and the java console says it is not found in the cache when it is used the second time, even though previously in the session is finds it with the correct version.
Any advice would be helpful

that i even know, but the problem is that i do not have that version of java re installed, but i found distribution 07 of the same java version, i'll try it out with that.
but when it still doesn't work, then i still would like to find the link where i can download java version 1.4.2_06.

Bible software with different version

Hi all, thanks for all good work you are doing here.
Please I want to ask: is it possible to have a parrallel bible application in my phone? I mean a bible with different versions as one application in my phone?

Steve,
Each web application has its own session within a J2EE container. You cannot share sessions, unless you deploy both apps as one web application which is probably not what you want. So, yes, the only work around I can think of is abandoning container-managed security so you can navigate to the other web app with some request params that cause an "auto-login" to happen.
Steven Davelaar,
JHeadstart Team.

Firefox Sync on same computer with different versions of Firefox

Hi,
I know how to use Sync on two different computers and a mobile device, but how can I Sync two or more different versions of Firefox (Nightly, Beta, Aurora, Release Candidate)? I can't get the code from the other computer/firefox because I can only have one version of Firefox open at the same time. I tried it. This is my setup. I have a different Profile for each version of Firefox I have. I also have each version of Firefox installed in a different directory, for example:
Nightly - C:\Program Files\Mozilla Firefox\Nightly\
Aurora - C:\Program Files\Mozilla Firefox\Aurora\
Beta - C:\Program Files\Mozilla Firefox\Beta\
Release Candidate - C:\Program Files\Mozilla Firefox\Release Candidate\
and my Profiles are in my
Nightly - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Nightly\
Aurora - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Aurora\
Beta - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Beta\
Release Candidate - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Release Candidate\
and I run Firefox with the following command (Properties/Target)
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Nightly"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Aurora"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Beta"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Release Candidate"
Can anyone help me so that I can Sync all the accounts (basically, just the bookmarks), so I will have access to all my bookmarks, instead of going to the firefox version I saved it in? I would appreciate any and all assistance concerning this matter.
Thank You.

Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously, but do not use -no-remote with the default browser and the default profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Tools > Options > Sync" or "Firefox > Set Up Sync"
# click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
# click "I Have an Account" : Connect
# click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key)
# click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

ITunes sync with different Apple IDs

I've got iTunes on my Mac, with my personal Apple ID and content purchased with it, and sync a couple personal iOS devices with it. All is good.
Now here's the complication. My wife's business has a couple iPads that are currently synced with a Windows machine at her office. I need an easier way to maintain them, though, and would like to sync them with my personal machine instead. But they have content purchased with the Apple ID I set up for my wife's business... is it possible to sync all these devices and their content with the same machine, despite having two different Apple IDs involved? Or am I stuck using one machine for my personal stuff and a different machine for the business stuff?
Thanks in advance!

Thomas A Reed wrote:
My wife's business has a couple iPads that are currently synced with a Windows machine at her office. I ... would like to sync them with my personal machine instead. But they have content purchased with the Apple ID I set up for my wife's business...
is it possible to sync all these devices and their content with the same machine, despite having two different Apple IDs involved?
yes.
a single iTunes can be authorized for up to five Apple ID's. this should work:
1) ensure iTunes is authorized for both Apple ID's
2) connect the devices (one after the other) and right-click or control-click them in the iTunes Devices list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPads but, since you transferred the purchases in the previous step, your content will be in iTunes and you can re-populate the iPad with it.
once this is done, the iPads will be associated with your Mac's iTunes library.

Syncing with different computer

I have initially synced my new iPad to my old computer(now it is dead). Now I can't sync it to my new one - it just does not sync with iTunes on new one. What do I do in this case?

Before he connects his iPad to the new computer, it would be best to advise him to "Authorize" the iTunes account on the new computer with his Apple ID and Password. And before he syncs for the first time, he should transfer any purchases he might have made on his iPad to the iTunes account. He can then sync and not lose anything.

Items in the shopping cart appear with different price than in the catalog

Hi All,
We are running SRM 5.0 (Classic Scenario) with external catalogues.
After selecting items from the external catalogue and transferring them to the shopping cart, the items appear with different price(the problem exists in the productive system)
The strange thing is that there is no dependence or sequence between the differences. For example, in one shopping cart, one item is with correct price, the price of the other item is not correct (when I click on the icon which is showing item details in the catalogue, the price is different than the one in the shopping cart). Sometimes the difference is significant, sometimes not - if the item price in the catalogue is 22.34 EUR, in the shopping cart is 21.22EUR or if the item is 45.62EUR in the shopping cart is 45.60 EUR. There is no logic.
I tried to create a shopping cart in the support system, with the same items from this catalogue, and they are sent back in SRM with the correct prices.
I traced all OCI parameters, sent from the supplier catalogue, and everything is correct.
At the example given below the price in the shopping cart ordered in the productive system is 69.00CZK, and after that during the test the correct price of 73.870CZK has appeared.
NEW_ITEM-DESCRIPTION==Durable-KeyClip-keytag%2C+black
NEW_ITEM-MATNR==
NEW_ITEM-MATGROUP==
NEW_ITEM-QUANTITY==10
NEW_ITEM-UNIT==EA
NEW_ITEM-PRICE==73.870
NEW_ITEM-PRICEUNIT==1
NEW_ITEM-CURRENCY==CZK
NEW_ITEM-NEW_ITEM-LEADTIME==1
NEW_ITEM-VENDOR==
NEW_ITEM-VENDORMAT==0176%2F1957001
NEW_ITEM-MANUFACTCODE==
NEW_ITEM-MANUFACTMAT==
NEW_ITEM-CONTRACT==
NEW_ITEM-CONTRACT_ITEM==
NEW_ITEM-SERVICE==
NEW_ITEM-EXT_QUOTE_ID==
NEW_ITEM-EXT_QUOTE_ITEM==
NEW_ITEM-EXT_PRODUCT_ID==23109
NEW_ITEM-EXT_SCHEMA_TYPE==UNSPSC
NEW_ITEM-EXT_CATEGORY_ID==55121504
NEW_ITEM-LONGTEXT_1%3A132==Durable-KeyClip%0D%0Akeytag%2Cblack%0D%0A%0D%0A6pc
I checked the error log in SLG1 for BBP_OCI, and no error message exists. In my opinion the problem can be in supplier system, because otherwise all items will be with wrong price. And at the moment, there are shopping carts in which all items are with the correct price!
It is not something in the user profile, because in one shopping cart created by one user some items are correct, some of them not.
I also checked with the supplier, they said that they haven't change the price, recently.
Has somebody of you met this problem?
In the IMG-> Define External Web Services (Catalogs, Vendor Lists etc.) I have set all parameters for the standard call structure: the URL of the supplier, our company ID and password for their catalogue.
In the Detail view for the catalogue, the following parameters are set
u201CAdditional functions in the product catalogueu201D field:
-     Display product data again in the catalogue
-     Validate product data from SAP Enterprise Buyer
-     Find supply sources
u201CTechnical Settingsu201D field
- Use Error Log
Thanks,
Desi

That means that we are not maintaining material numbers in SRM, so there are no predefined price or info records for that materials in R/3 system, or in SRM.
In the set up of external catalogues, validation of the price is set. Which means that, if a new shopping cart is created from already existing one, and meanwhile, a change of the price is done by the supplier in the catalogue, the new item price will be adopted in the shopping cart.
No prices are maintained in the SRM system, everything is from the supplier catalogue.
Desi

Master iPad configurator question concerning cart syncing with different versions of iPads.

Similar Messages

Maybe you are looking for