Master Volume not shown?

I am creating a podcast, and just realized that the Master Volume is not shown anywhere on the console. Is it not available in podcast mode ... ??
[EDIT: Nevermind. I quit and restarted, and now I'm seeing it.]

Restart solved problem.

Similar Messages

Time_dep master attributes not shown in transaction data report

My 'emp-ids' has timedependent attibutes.When I create the query from a ODS[ where emp-id is part of key] and drag the attributes. I do not see the attributes in report. I had a data-to and date-from as part of key fields for ODS. I choose range spanning different Years. I am expecting to see changes to attributes as well key figure info.I can see the KeyFig but not attributes.
The MAster data is loaded first and ODS later. Attributes are all set to be time-dependent and are navigational.
When I use the 'Key Date' feature of Query-Properties I can see emp-attributes that belong to only one of the date range,but Key figures are for all data ranges.
Shouldn't I be able to see attribute changes along with KeyFigures when I choose different date spans.

Hi,
Are the 'date-to' and 'date-from' infoobjects time-characteristicts type of infoobjects or a normal characteristic infoobject? (Time characateristics infoobjects are system provided ones eg 0CALDATE, 0CALMONTH).
If it is a normal custom defined characteristic (like any other CHAR.. infoobject) then BW will not be able to relate it with the time values of the master-data (even when you are filling these with date/time values, it is not known to the system as a time field) and result in this problem.
cheers,
Ajay

I bought a usb microphone (blue snowball). I can't hear any sound from it. The MIDI master volume is turned all the way down, and I can't turn it up because it's frozen/locked. Please help!!! Not very tech savvy, been at this for hours and desperate :(

I've been trying to fix this problem, seems like it would be simple, but apparently it is not. I just want to turn up the master volume control under my input tab in MIDI audio devices so I can use my blueball microphone.
This image above is what I'm currently dealing with. I put a red box around the volume control I want to use. That is the one I can't turn up because it is locked/frozen.
Please make steps as simple as possible!
Thanks

You should have gotten a user manual. If the manual is of no help, contact the manufacturer.

Segment field is not shown in profit center master data

Hi,
When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ?
Thanks.

After activating the New GL have you defined the segment? First define the segment under Enterprise Structure and in Fin.Acctg Global settings(New)-Legers-Display scenarios for General Ledger Accounting, you need to create new entries for FIN_PCA & FIN_SEG.
Hope this helps you.

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Loss of audio after upgrade os x 10.7.5, reset PRAM, SMS, updated software and other recommendations i could find. Master volume sliders inactive in Audio Midi section. Can see sound bar responding it input on line in but is not being internally routed.

Recently upgrade to OS x 10.7.5 resulted in loss of what appears to be internal communication of line in audio, and output. Have tired several remedies including resetting PRAM, SMS, updating all software, multiple Sound and Audio Midi applications adjustments to no avail. Also no audio is recognized on USB mixing board I tried as well, though Audio USB Codec was displayed. THe master volume sliders and other options are greyed out on Audio Midi application whn I try to troubleshoot that. Nothing external will play through computer speakers, but internal sounds and iTunes play normally.I made sure the audio sampling rates were default. Software issue or soundcard/hardware failure.?..Pullin my hair out!

Might be corrupted sound preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

Why I can not find mic under master volume -- laptop is HP 8510w.

generally it should have a setting for microphone under master volume.
do you know what's the rootcause/thanks.

Hi popcatalin118. According to the Maintenance And Service Guide you are spot on!
(Power button board (includes cable) 720553-001)
Guide Download here: See Page 22:
http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
Let me know if that helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Top master level meter above master volume slider not working

I have a Power Mac G4, OS X 10.4.6, and GarageBand 3.0.2 (103).
I used a keyboard and GarageBand software instruments to record many tracks for a song. It played in stereo. I saved it. Many days later, I went back and added more tracks, using my keyboard, to the end of the original song to lengthen the song.
My problem: This last song now only plays back with sound coming out of the right speaker. There is NO sound coming from the left speaker.
This original song and all my other saved songs play back in stereo - sound from both speakers. I noticed that the top master level meter above the master volume slider shows no green as this song now plays. The bottom one does show green for the volume as it plays.
I copied a track and pasted it into a "new" song and it plays from both speakers. I copied and pasted an original track and one of the new tracks at the end of the song and both play in stereo in the "new" song.
I checked to make certain that the track pan position is center top of all tracks. I even moved one track pan position entirely to the left on one track but still no sound from the left speaker.
Could someone pleae help me?
Power Mac G4 Mac OS X (10.4.6) No sound from left speaker

It sounds like somehow the pan position on the Master Track has been inadvertantly moved to the right on that song. You didn't say you checked that pan position, but that would explain this sort of thing happening. The meter is probably working correctly but the master has been panned to one side.

Tracks suddenly not being heard in master volume.

Can see tracks moving. No ducking on , no mutes either. Can't figure out why I can't hear tracks. At one point I pressed stop button and for a split second I could hear volume??
Imported an mp3 to see if I could hear that in another track. But couldn't
I've used Mac Book pro output and my KB37. I'm also using Gearbox.
Other projects seem to work fine.
Would really apreciate any help !
Thanks CT
GB '11

Hi there and thank you
Yes actually I tried that , but eventually I resorted to copying the tracks to a new project.
There appeared to be a corrupted file(s) which stopped master volume.
The answer came here:
RESCUING FILES
http://www.bulletsandbones.com/GB/Tutorials/RescuingFiles09_11.html
it's a brilliant tutorial...
is bulletsandbones your other handle?

No Volume in system tray, master volume disabled, no audio drivers - Dv6500 model

Hi,
OS- win xp sp2(downgrade from vista to xp )
Model: dv 6500
I need serious help with my audio drivers. To start off there is no volume icon in my system tray, so I tried to enable it through control panel but before I try to enable it, the master volume is already greyed out so there is no way i can enable it or get it on system tray nor can i change the volume, mixer setting or just any setting in sound volume and devices dialog box.
Initially in teh properties tab of sound and devices the message was all drivers are working fine however still I could not listen any voice from any application. I tried to reintall the old audio driver(sp34200) and new one's like sp33310 still there is no audio..
tried to start audio application in services but still no result, did a virus check but it shown no virus attack. I have given up , plz help me out . I am exhausted i guess I ahve tried each and everything available on net. plz plz help someone.

I can't help, other than to say this happened to me today with the same hardware, only with GarageBand.
I recorded bass tracks this morning -- no problem. This afternoon, though, every time I plugged in the Tascam GarageBand went silent, even though the system input shows sound coming in.

Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

Hello to all,
we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really be called a professional productive system at the moment...
Ok., one thing after the other...here is one of our biggest problems:
After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
"Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
Thanks in advance
C.

Hi William,
thank you for your response.
As you can read in my post I talked about CIFS/SMB.
It makes no difference if we mount the share over CIFS or SMB.
Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
As mentioned I believe this is a timeout problem.
Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
Kind regards
C.

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

ALSA - Master volume no longer having an effect on headphone volume

I use ALSA and have both my 'front' (speakers) and 'headphone' audio volume set to max. Then I control the two by adjusting the master volume.
Since my last system update this worked fine however now when I change the master volume it only affects the sound coming from my speakers and my headphones are constantly at max unless I specifically change the headphone volume in 'alsamixer'. This is inconvenient since I have the master volume controlled by hotkeys.
I know I can work around this and hotkey my controls to change both the master and headphone volumes but this leaves room for things getting out of sync. Is there a way to revert back to the old method?

Hi-
"Essentially" a clone and a clone are not the same. There are alot of things that don't get copied when you simply drag folders. Pathways to aliases are one of them.
Use SuperDuper! (the best IMHO) or Carbon Copy Cloner to get real bootable clones of your system and files.

Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac. It says only that the user has "custom permissions", which is true since there are ACL's in operation. However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action). The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround. I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

Hi,
I did two things to get it working, and haven't taken the time to sort out which did it. But it is working so it's good enough for me.
First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet". I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR. Bonjour went grey but stayed checked.
After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
So all working well.

Master Volume not shown?

Similar Messages

Maybe you are looking for