MAT error: 0xHEX is used a class and object...

Hi there,
playing around some more with MAT I ran into the following error with some of my dumps. All were taken on 1.5 SUN JVMs (running on either Solaris or Linux).
org.eclipse.mat.snapshot.SnapshotException: Error: 0x8d776450 is used as class and object simultaneously. Are you using a beta DLL for Sun JDK 1.4.2 to write the heap dump?
at org.eclipse.mat.hprof.HprofParserHandlerImpl.createRequiredFakeClasses(HprofParserHandlerImpl.java:191)
at org.eclipse.mat.hprof.HprofParserHandlerImpl.beforePass2(HprofParserHandlerImpl.java:89)
at org.eclipse.mat.hprof.HprofIndexBuilder.fill(HprofIndexBuilder.java:76)
at org.eclipse.mat.parser.internal.SnapshotFactoryImpl.parse(SnapshotFactoryImpl.java:183)
at org.eclipse.mat.parser.internal.SnapshotFactoryImpl.openSnapshot(SnapshotFactoryImpl.java:101)
at org.eclipse.mat.snapshot.SnapshotFactory.openSnapshot(SnapshotFactory.java:77)
at org.eclipse.mat.ui.internal.ParseHeapDumpJob.run(ParseHeapDumpJob.java:52)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Since the suggested problem (usage of JDK 1.4.2) is not the case: What else can I do to find out what is going on? Do I need any special switches for jmap? The dumps all were taken with the same command:
jmap -heap:format=b <pid>
Still, some work, some do not. Any suggestions?
bye, Michael

Hi Michael,
this smells like a bug. The easiest way again is to have a look at the dump. If you zip it, it should become smaller. I could also provide upload space. Right now, I am at the J1 in San Francisco so it might not be as easy for me to fix this.
Andreas.

Similar Messages

ALV using ABAP Classes and Objects

Hi All,
I am trying to print the values in my internal table using ALV, using ABAP classes and objects. Here the title for columns are picked based on the title specified in the data element. I want to set the title of my columns by my own. how to achieve this ?. Please provide me a sample code if possible.
thanks & regards,
Navneeth.K

Hello Navneeth
The following sample report shows how to build and modify a fieldcatalog (routine <b>BUILD_FIELDCATALOG_KNB1</b>).
*& Report ZUS_SDN_ALVGRID_EVENTS
REPORT zus_sdn_alvgrid_events.
DATA:
gd_okcode        TYPE ui_func,
gt_fcat          TYPE lvc_t_fcat,
go_docking       TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1.
PARAMETERS:
p_bukrs      TYPE bukrs DEFAULT '2000' OBLIGATORY.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
        IMPORTING
          e_row_id
          e_column_id
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
*   define local data
    DATA:
      ls_knb1     TYPE knb1,
      ls_col_id   TYPE lvc_s_col.
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CASE e_column_id-fieldname.
      WHEN 'KUNNR'.
        SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
        SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      WHEN 'ERNAM'.
*        SET PARAMETER ID 'USR' FIELD ls_knb1-ernam.
*        NOTE: no parameter id available, yet simply show the priciple
        CALL TRANSACTION 'SU01' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
*       do nothing
    ENDCASE.
*   Set active cell to field BUKRS otherwise the focus is still on
*   field KUNNR which will always raise event HOTSPOT_CLICK
    ls_col_id-fieldname = 'BUKRS'.
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
        is_row_id    = e_row_id
        is_column_id = ls_col_id.
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_hotspot_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    CHANGING
      it_outtab       = gt_knb1
      it_fieldcatalog = gt_fcat
    EXCEPTIONS
      OTHERS          = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form BUILD_FIELDCATALOG_KNB1
*       text
* --> p1        text
* <-- p2        text
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
    ls_fcat        TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
*     I_BUFFER_ACTIVE              =
      i_structure_name             = 'KNB1'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_BYPASSING_BUFFER           =
*     I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = gt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat
          WHERE ( fieldname = 'KUNNR' OR
                  fieldname = 'ERNAM' ).
    ls_fcat-hotspot = abap_true.
    ls_fcat-scrtext_s = '<short text>'. " short text of column
    ls_fcat-scrtext_m = '<medium text>'. " medium text of column
    ls_fcat-scrtext_l   = '<long text>'. " longtext text of column
    ls_fcat-tooltip      = '...'. " ALV control: Tool tip for column header
    ls_fcat-coltext    = '...'.   " ALV control: Column heading
    MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                    " BUILD_FIELDCATALOG_KNB1
Regards
Uwe

Customizing FD01 and FB70 using PS Class and Characteristics

Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
Please kindly give your suggestions. Thanks in advance
Regards,
Nik

Joao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik

Hi when i use treeMap class and if i exit the program

hi
hi when i use treeMap class and if i exit the program,
what will happen? the information that i put in the treeMap will be disappear??
if it is like that,,how am i able to retrieve my data...when i restart my program..
once i put ID as key and put my customer information,
in it, after exit my program,, and i can't find
my customers by their ID,,,,,,,,,how can,,i solve it......

what will happen? the information that i put in the
treeMap will be disappear??Yes. Of course. If you want data to hang around you have to tell the computer. If you want anything to happen you have to tell the computer.
if it is like that,,how am i able to retrieve my
data...when i restart my program..Tada! Tell the computer. Your simplest option is to use Serialization.
Before exiting your program, serialize your TreeMap to disk. After starting your program serialize your TreeMap from disk.
First stop should be your text book to learn what Serialization is and how it works, then try to write some code, then ask us to help with any problems.
Dave.

Find Universe, classes and objects used in each report

I want to find a list of universes, classes and objects used in each report
or the other way to find list of reports which use a particular universe. please let know, i could not get much information from activity universe in a proper way.

Hello Venkataramat,
plese post in more detail what kind of report you are using Crystal report ? webi ? Deski.
Please post in the specific forums.
If you have a Crystal Report I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports; forum.
Best regards
Falk

Can I use classes and objects to create my own package in LabVIEW?

Hi....I am writing my thesis on develpoing a simulation package. I am trying to compare simulation packages and their feautures as a scope of my project. Does anyone know if LabVIEW allows users to create their own toolboxes like MATLAB?...i mean something that can be done in object-oriented programming by making classes and objects.
thanks guys

The short answer is yes. NI sells toolkits. There's also OpenG. How you code the guts is up to you - you can do it non-LVOOP or LVOOP.

Need help w/ created classes and objects

I am having a difficult time understanding what is wrong w/ my classes and objects. I've looked in two books and have messed around a bit. Here is what I am -attempting- to do.
I want to make a class called CLOTHING. In this class i want objects such as shirt and pants (for now).
these are the errors im getting:
.\Shirt.java:6: invalid method declaration; return type required
     public Shirt(int size){
               ^
.\Shirt.java:3: class Clothing is public, should be declared in a file named Clothing.java
public class Clothing {
       ^
MyClassHW.java:10: cannot resolve symbol
symbol : constructor Shirt (int,int)
location: class Shirt
          myShirt = new Shirt(1,1);
                          ^
3 errors------------------------------------------------------------
This is the code for my Clothing class:
import java.awt.*;
public class Clothing {
     private int shirtSize;
     private void Shirt(Graphics s, int h, int v){
     Polygon shirts;
          shirts = new Polygon();
          shirts.addPoint(5+h,8+v); // 1
          shirts.addPoint(17+h,12+v); // 2
          shirts.addPoint(19+h,13+v); // 3
          shirts.addPoint(33+h,8+v); // 4
          shirts.addPoint(37+h,13+v); // 5
          shirts.addPoint(25+h,20+v); // 6
          shirts.addPoint(25+h,28+v); // 7
          shirts.addPoint(15+h,28+v); // 8
          shirts.addPoint(15+h,20+v); // 9
          shirts.addPoint(1+h,12+v); //10
          s.fillPolygon(shirts);
}from what i understand each object is essentially a method...
Here is the code for the java applet I'm making:
import java.awt.event.*;
import java.awt.*;
import java.applet.*;
public class MyClassHW extends Applet { // implements ActionListener, AdjustmentListener {
     Shirt myShirt;
     int size;
     public void init(){
          myShirt = new Shirt(1,1);
// <applet code = "MyClassHW.class" height = 300 width=300> </applet>thank you for your time and help. as always, your efforts are appriciated.

.\Shirt.java:6: invalid method declaration; return type required     public Shirt(int size){
I guess, public Shirt(int size) is constructor in class shirt. You have one int in this constructor. Shirt(int size)
Here you initialize your shirt with two int:
MyClassHW.java:10: cannot resolve symbolsymbol : constructor Shirt (int,int)location: class Shirt          myShirt = new Shirt(1,1);
Shirt(int size, int what?)
It's why it show such message.
But even if you fix it seems like you have very vague ideas about what you are doing.
As far as I understood you need three classes.
First applet Clothing:
public class Clothing extends Applet{
Shirt myShirt;
Pants myPants;
public void init() {
myShirt = new Shirt(1); // small shirt
myPants = new Pants(32, 40); // medium waist and long legs
Second and third your classes Shirt and Pants:
public class Shirt extends Object {
int size;
public Shirt(int s) {
size = s;
public int getSize () {
return size;
same for Pants, only you need two parameters for it or whatever you want.
You could design it diffrently if you want derive your Shirts and Pants from Clothing and then to use them in your applet. But, indeeed, you desperately have to do some serious reading, where authors are accurate in they definitions and stuff, because it's kind of complicated.

When I try to open an embedded PDF file I get an error "The program used to create this object is AcroExch.exe.

When I try to open an embedded PDF file (Word doc) I get an error "The program used to create this object is AcroExch.exe. That program is either not installed on your computer, or is corrupt..." I've tried about everything from unchecking
protected mode at startup to removing & reinstalling Adobe. Nothing seems to fix this issue. Any other ideas?
This is happening on Adobe reader 9, 10 & 11 with MS Word 2010 & 2013. I've uninstalled, cleaned & reinstalled Reader 9, 10 & 11, as well as Acrobat 10 Pro & 11 Standard. Removed "Protected mode at startup, and changed
the default program for viewing from reader to Acrobat. This will not go away. It is affecting production at our company.

" Help > Troubleshooting Information > Profile Directory: Open Containing Folder" . i can't find open containing folder in profile directory. it does give me the option to open the places.sqlite file using graphic converter. when i try that, graphic converter gives me a window saying that it can't be opened because it is corrupted or is not a file type supported by graphic converter.
i appreciate your help with a workaround to get the old bookmarks. that works. however, the problem has morphed from that concern to why adobe reader [the default app.] won't open firefox .sqlite files. is the problem in adobe reader or firefox? also, how can i tell if the places.sqlite file is corrupt?
i'm getting in over my head here and do appreciate your help.

Class and Object name change in the universe designer

Hello Experts
I have a confusion , I am just wondering if I devlop a bobj universe, lets say, based on SQL database and change the name of the class and object during the creation of the universe, will that fetch the data from d/base properly while running a query / report. Although universe class and object has different names than database now but the records are the same. Do we need to point the object to d/base object in some kind of different or special way .
To make my question more simple, In d/base table name is "Employee" whereas on universe side I create a class name "Staff" and at the same time field name in the database is "Emploee ID" whereas in the universe I named it "Badge number".
Please advise if that will make any difference while I run the query or Is there any kind of complication on the universe side that I should expect which I am not familiar with.
I would apprecite your response.
Best Regards

Hello experts,
Let me rephrase the issue with exact scenario.
I have a table names "REGION" with fields region id, region and country id.
I have another table name REGION_SLINE with fields SL_id, region id and Sales_revenue.
I created an equi join between these two tables based on region id field and checked the cardinality which is ok.
Now when I try to create a report based on sales revenue per customer ( "customer's first name" is an other field on CUSTOMER table), I dont get any result in the report and get a message that "No data to reterive"
Also please note that when I run a report which is sales revenue per region id, I get the result, seem slike these two tables REGION and REGION_SLINE can generate the report but sales revenue per customer report is not generated because customer first name is a field of another table.
I was just wondering if I need to write some kind of where clause in the object properties of region id which is used to create equi joon link.
I woulld appreciate your response.
Regards
Edited by: SAP_LCCHS on Jul 4, 2011 9:19 AM
Edited by: SAP_LCCHS on Jul 4, 2011 9:21 AM

Object Class and Object Id for material Determination tables.

I want to know what is the Object Class and Object Id for material Determination records to verify tables CDHDR and CDPOS.
The purpose is to know the changes done by the different users for material determination records.
Can any one help.

Hi ZZZSUNNY,
Similar question is answered recently.Please find the below link which will helps you
Material determination: how to see the creater of a record?
Thanks
Dasaradha

Help in using record type and object type

Hi Experts,
I am new to object types and record types.
I want to return the output of this query using one OUT parameter
from the procedure using RECORD type or OBJECT type.
with out using refcursor.
SELECT empno,ename,sal FROM emp WHERE deptno=30;
Let us assume the query is returning 50 records.
I want to send those 50 records to OUT parameter using record type or object type.
Please provide the for the requirement code using RECORD TYPE and OBJECT TYPE separately.
Your earliest response is appreciated.
Thanks in advance.

Hi All,
I have tried this.But it ising not work
CREATE OR REPLACE PACKAGE maultiplevalues_pkg
IS
TYPE t_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
V_RECORD t_record;
TYPE t_type IS TABLE OF V_RECORD%TYPE;
PROCEDURE maultiplevalues_pROC(p_deptno IN emp.deptno%TYPE,
dept_result OUT t_type);
END;
CREATE OR REPLACE PACKAGE body maultiplevalues_pkg
IS
PROCEDURE maultiplevalues_pROC(p_deptno IN emp.deptno%TYPE,
dept_result OUT t_type)
is
begin
dept_result :=t_type();
for I in(
select EMPNO,ENAME,SAL from EMP WHERE deptno=p_deptno
LOOP
dept_result.extend;
dept_result(i).empno :=i.empno;
dept_result(i).ename :=i.ename;
dept_result(i).sal :=i.sal;
END LOOP;
END;
END;
Please help me OUT return multiple values through single OUT variable in a procedure.
Thanks.

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class
The Java Tutotials has several trails that discuss both implicit and explicit locking, how they work and has code examples.
The Concurrency trail has the links to the other sections you need to review
http://docs.oracle.com/javase/tutorial/essential/concurrency/index.html
The Synchronized Methods and Intrinsic Locks and Synchronization trails discusse Synchronized Methods and Statements
http://docs.oracle.com/javase/tutorial/essential/concurrency/syncmeth.html
And the Lock Objects trail begins the coverage of explicit locking techniques.
http://docs.oracle.com/javase/tutorial/essential/concurrency/newlocks.html

Help with Xcode what is the difference between a Function, class and object

Hi all,
I'm new here and in programming in Xcode. My question is can somebody tell me what the difference is between functions classes and object. I will appreciate it if you can involve some articels or something else.
Many thanks,
RL6001

Do a Google search for object-oriented programming. When I did, I found the following tutorial, which explains what objects and classes are:
Object Oriented Programming Tutorial

Using java class and variables declared in java file in jsp

hi everyone
i m trying to seperate business logic form web layer. i don't know i am doing in a right way or not.
i wanted to access my own java class and its variables in jsp.
for this i created java file like this
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
    public static void main(String args[]){
        Connection con = null;
        ResultSet rs=null;
        Statement smt=null;
        try{
            Class.forName("com.mysql.jdbc.Driver").newInstance();
            con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
            smt=con.createStatement();
           rs= smt.executeQuery("SELECT * FROM emp");
           while(rs.next()){
            String str = rs.getString("Name");
            }catch( Exception e){
                String msg="Exception:"+e.getMessage();
            }finally {
      try {
        if(con != null)
          con.close();
      } catch(SQLException e) {}
}next i created a jsp where i want to access String str defined in java class above.
<%--
    Document   : fisrt
    Created on : Jul 25, 2009, 3:00:38 PM
    Author     : REiSHI
--%>
<%@page import="ris.NewClass"%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>JSP Page</title>
    </head>
    <body>
        <h1><%=str%></h1>
    </body>
</html>I wanted to print the name field extracted from database by ResultSet.
but it gives error cannot find symbol str.
please help me to find right way to do this.
i am using netbeans ide.

Very bad approach
1) Think if your table contains more than one NAMEs then you will get only the last one with your code.
2) Your String is declared as local variable in the method.
3) You have not created any object of NewClass nor called the method in JSP page. Then who will call the method to run sql?
4) Your NewClass contains main method which will not work in web application, it's not standalone desktop application so remove main.
Better create an ArrayList and then call the method of NewClass and then store the data into ArrayList and return the ArrayList.
It should look like
{code:java}
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
    public static ArrayList getNames(){
        Connection con = null;
        ResultSet rs=null;
        Statement smt=null;
        ArrayList nameList = new ArrayList();
        try{
            Class.forName("com.mysql.jdbc.Driver").newInstance();
            con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
            smt=con.createStatement();
           rs= smt.executeQuery("SELECT * FROM emp");
           while(rs.next()){
            nameList.add(rs.getString("Name"));
           return nameList;
            }catch( Exception e){
                String msg="Exception:"+e.getMessage();
               </code><code class="jive-code jive-java"><font>return nameList;</code><code class="jive-code jive-java">
            }finally {
      try {
        if(con != null)
          con.close();
      } catch(SQLException e) {}
      </code><code>return nameList;</code>
<code class="jive-code jive-java">    }

Error Message When Using a Class Files to Control Navigation

This is my first attempt at using a class file in a flash project. My intent is to keep all of my navigation elements in class file called "Navigation". However, I keep getting an error message when I publish.
I am using a button to go back to the main screen and I gave that button the instance name of "bnt_home". I have also linked that button in the library to the class "Navigation".
Here is the code:
package
    import flash.display.SimpleButton;
    public class Navigation extends SimpleButton
        public function Navigation()
            bnt_home.addEventListener(MouseEvent.MOUSE_DOWN, goNavigation);
        private function goNavigation(event:MouseEvent):void
            gotoAndPlay(1,"Main");

When I changed the code I got error (1046: Type was not found or was not a compile-time constant: MouseEvent).
package
    import flash.display.SimpleButton;
    public class Navigation extends SimpleButton
        public function Navigation()
            this.addEventListener(MouseEvent.MOUSE_DOWN, goNavigation);
        private function goNavigation(event:MouseEvent):void
            root.gotoAndPlay(1,"Main");

MAT error: 0xHEX is used a class and object...

Similar Messages

Maybe you are looking for